This watch uses a solar cell and rechargeable battery to operate. It is important to keep the watch exposed to bright light to charge the battery as battery power will be depleted if the watch is kept in the dark. The watch receives time calibration signals to automatically update the time setting; it can receive signals from transmitters located in Germany, England, the United States, China, and Japan. The user can also manually set the time and home city code if needed. Proper use of the watch's solar charging and time signal reception features helps to ensure accurate timekeeping.
This watch uses a solar cell and rechargeable battery to operate. It is important to keep the watch exposed to bright light to charge the battery as battery power will be depleted if the watch is kept in the dark. The watch receives time calibration signals to automatically update the time setting; it can receive signals from transmitters located in Germany, England, the United States, China, and Japan. The user can also manually set the time and home city code if needed. Proper use of the watch's solar charging and time signal reception features helps to ensure accurate timekeeping.
This watch uses a solar cell and rechargeable battery to operate. It is important to keep the watch exposed to bright light to charge the battery as battery power will be depleted if the watch is kept in the dark. The watch receives time calibration signals to automatically update the time setting; it can receive signals from transmitters located in Germany, England, the United States, China, and Japan. The user can also manually set the time and home city code if needed. Proper use of the watch's solar charging and time signal reception features helps to ensure accurate timekeeping.
This watch uses a solar cell and rechargeable battery to operate. It is important to keep the watch exposed to bright light to charge the battery as battery power will be depleted if the watch is kept in the dark. The watch receives time calibration signals to automatically update the time setting; it can receive signals from transmitters located in Germany, England, the United States, China, and Japan. The user can also manually set the time and home city code if needed. Proper use of the watch's solar charging and time signal reception features helps to ensure accurate timekeeping.
Getting Acquainted Congratulations upon your selection of this CASIO watch. To get the most out of your •The actual level at which some functions are disabled depends on the watch model. purchase, be sure to read this manual carefully. •Frequent display illumination can run down the battery quickly and require charging. The following guidelines give an idea of the charging time required to recover from a Keep the watch exposed to bright light single illumination operation. The electricity generated by the solar cell of the watch is Approximately 5 minutes exposure to bright sunlight coming in through a window Bright Light stored by a rechargeable battery. Leaving or using the Approximately about 8 hours exposure to indoor fluorescent lighting l
l l l l l l l l l watch where it is not exposed to light causes the battery •Be sure to read “Power Supply” for important information you need to know to run down. Make sure the watch is exposed to light as when exposing the watch to bright light. Solar cell much as possible. •When you are not wearing the watch on your wrist, If the display of the watch is blank... position the face so it is pointed at a source of bright If the display of the watch is blank, it means that the watch’s Power Saving function light. has turned off the display to conserve power. •You should try to keep the watch outside of your sleeve •See “Power Saving Function” for more information. as much as possible. Charging is reduced significantly if the face is covered only partially. Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any damage or loss suffered by you or any third party arising through the use of this product or •The watch continues to operate, even when it is not exposed to light. Leaving the its malfunction. watch in the dark can cause the battery to run down, which will result in some watch functions to be disabled. If the battery goes dead, you will have to re-configure watch settings after recharging. To ensure normal watch operation, be sure to keep it About This Manual exposed to light as much as possible. •Depending on the model of your watch, display text appears either as dark figures on a light background or light figures on a dark background. All sample displays in Battery charges in the light. Battery discharges in the dark. this manual are shown using dark figures on a light background. •Button operations are indicated using the letters shown in the illustration. Solar cell Bright Light •Each section of this manual provides you with the information you need to perform (Converts light to Electrical energy operations in each mode. Further details and technical information can be found in electrical power.) the “Reference” section.
LEVEL 1 All LEVEL 1 functions LEVEL 2 enabled LEVEL 2 LEVEL 3 Some or all Dis- LEVEL 3 Charge charge LEVEL 4 functions LEVEL 4 disabled
Rechargeable battery
General Guide World Time Mode Alarm Mode
•Press C to change from mode to mode.
•In any mode (except when a setting screen is on the display), press B to illuminate the display. ▲
▲ Timekeeping Mode
Press C. Countdown Timer Mode Stopwatch Mode
▲ ▲ ▲
Radio-controlled Atomic Timekeeping
This watch receives a time calibration signal and updates its time setting accordingly. 3. Press A to exit the setting screen. •This watch is designed to pick up the time calibration signals transmitted in Germany •Normally, your watch should show the correct time as soon as you select your Home (Mainflingen), England (Anthorn), the United States (Fort Collins), China (Shangqiu), City code. If it does not, it should adjust automatically after the next auto receive and Japan (Fukushima, Fukuoka/Saga). operation (in the middle of the night). You also can perform manual receive or you can set the time manually. Current Time Setting •The watch will receive the time calibration signal automatically from the applicable This watch adjusts its time setting automatically in accordance with a time calibration transmitter (in the middle of the night) and update its settings accordingly. For signal. You also can perform a manual procedure to set the time and date, when information about the relationship between city codes and transmitters, see necessary. “Important!” under “Time Calibration Signal Reception” and “Transmitters”. •The first thing you should do after purchasing this watch is to specify your •See the maps under “Approximate Reception Ranges” for information about the Home City (the city where you normally will use the watch). For more reception ranges of the watch. information, see “To specify your Home City”. •You can disable time signal reception, if you want. See “To turn auto receive on and •When using the watch outside the areas covered by the time signal transmitters, you off” for more information. will have to adjust the current time setting manually as required. See “Timekeeping” •Under factory default settings, auto receive is turned off for all of the following city for more information about manual time settings. codes: MOW (Moscow), HNL (Honolulu), and ANC (Anchorage). For details about •The U.S. time calibration signal can be picked up by the watch while in North turning on auto receive for these city codes, see “To turn auto receive on and off”. America. The term “North America” in this manual refers to the area that consists of Canada, the continental United States, and Mexico. Time Calibration Signal Reception •As of December 2009, China does not use Daylight Saving Time (DST). If China There are two different methods you can use to receive the time calibration signal: does go to the Daylight Saving Time system in the future, some functions of this auto receive and manual receive. watch may no longer operate correctly. •Auto Receive •Using this watch in a country covered by a time calibration that is different from the With auto receive, the watch receives the time calibration signal automatically up to countries it supports may result in incorrect time indication due to local application of six times a day (five times a day for the Chinese calibration signal). When any auto summer time, etc. receive is successful, the remaining auto receive operations are not performed. For more information, see “About Auto Receive”. To specify your Home City 1. In the Timekeeping Mode, hold down A until the city •Manual Receive PM indicator City code code starts to flash, which indicates the setting screen. Manual receive lets you start a time calibration receive operation with the press of a l l l l 2. Press D (east) and B (west) to select the city code button. For more information, see “To perform manual receive”. ll l you want to use as your Home City. ll
ll
l l l l ll LIS, LON : Lisbon, London Important!
MAD, PAR, ROM, BER, STO : Madrid, Paris, •When getting ready to receive the time calibration signal, position the watch as Rome, Berlin, Stockholm shown in the nearby illustration, with its 12 o’clock side pointing towards a window. ATH: Athens This watch is designed to receive a time calibration signal late at night. Because of MOW : Moscow this, you should place the watch near a window as shown in the illustration when you Hour : Minutes Seconds HKG, BJS, TPE : Hong Kong, Beijing, Taipei take it off at night. Make sure there are no metal objects nearby. SEL, TYO : Seoul, Tokyo HNL : Honolulu ANC : Anchorage YVR, LAX: Vancouver, Los Angeles 12 o’clock YEA, DEN : Edmonton, Denver MEX, CHI : Mexico City, Chicago MIA, YTO, NYC: Miami, Toronto, New York or YHZ : Halifax YYT : St.Johns
Seniors Guide to Apple Watch: Non-Tech-Savvy Step-by-Step Guide to Learn and Master All Features with Simple Instructions! | Fully Large Illustrated Guide
