Supreme

Motorized
Shoe Reamer
 Motorized Shoe Reamer
Non-drillable Shoe
Motorized shoe reamer helps reach Target Depth with casing or linervand provides that
extra insurance when high torque is required downhole.
As with all our tools, it eliminates the need for casing string rotation. A positive displacement
motor-powered reamer, it has the benefit of low to mid speed and high torque.
The disposable motor enables the final string to be landed at Target Depth, and also delivers
the ability to drill new formation at Target Depth.
Our motorized shoe reamer is the best tool when high torque tough reaming is required
through the most challenging hole intervals. It offers exceptional performance with more
robust strings.

Features Benefits
► Low-cost Target Depth insurance
► Quick completion of trouble-zones and challenging intervals
► Minimized well-construction risks and HSE exposure
► Sacrificial motor with high torque capability
► Cement job done through MSR and/or Safety sub
► Reduced wiper and reaming trips
► Minimized probability of casing/liner pull out operations
► Range of Reamer Shoes available
► 150 C (302 F) rated power section
► Maximizes ROI
 Motorized Shoe Reamer
Non-drillable Shoe Specification
Specification (Imperial)
Size (in) 4 1/2 7 9 5/8
Description FS450ND FS700ND FS962ND
Outer diameter of the housing 4.17 in* 7 in* 9.44 in*
Outer diameter of the stabilizer 4.90 in* 7.32 in* 10.63 in*
Max. diameter of the shoe bit 5.50 in* 9.62 in* 12.25 in*
Total length 21.82 ft 21.82 ft 28.05 ft
Weight 661 lb 2 204 lb 4 188 lb
Top sub * * *
Bottom sub 3 ½ Reg (box) 4 ½ Reg (box) 6 5/8 Reg (box)
WOB weight 22 046 Lbf 66 138 lbf 88 184 lbf
Flow rate 95 – 190 GPM 396 – 554 GPM 475 – 792 GPM
Pressure drop 264 – 435 Psi 275 – 507 Psi 174 – 362 Psi
Speed at no load 100 – 200 RPM 84 – 154 RPM 90 – 150 RPM
Rev/Unit volume 1.05 rev/gal 0.2 rev/l 0.19 rev/l
Max. allowable differential pressure 1 044 psi 1 044 psi 1 044 psi
Speed at max. power 90 – 180 RPM 60 – 110 RPM 66 – 114 RPM
Torque at max. power 3 800 ft·lbf 6 195 ft·lbf 4 425 ft·lbf
Overpull to Yield 202 825 lbf 639 339 lbf 1 102 310 lbf
Max Working temperature 302°F 302°F 302°F
Assigned run time 150 hours 150 hours 150 hours
Compatibility with OBM & WBM Yes Yes Yes
Material type Alloy steel 4340 Alloy steel 4340 Alloy steel 4340
Safety Sub Specifications
Size (in) 4 1/2 7 9 5/8
Description SS450ND SS700ND SS962ND
Outer diameter of the housing 5.06” 7.32” 10.63 in*
Total length 3.02 ft 3.28 ft 3.28 ft
Activation pressure 2 170 – 3 620 PSI 1 740 – 2 320 PSI 1 740 – 2 320 PSI
Pass through ID TFA 4.38 in.sq. 30.91 in.sq. 61.27 in.sq.
Ports Total Flow Area, TFA 3.18 in.sq. 8.1 in.sq. 8.1 in.sq.
Connection thread * * *
* according to customer requirements

Specification (Metric)
Size (mm) 114 178 240
Description FS450ND FS700ND FS962ND
Outer diameter of the housing 106 mm* 178 mm* 240 mm*
Outer diameter of the stabilizer 124.5 mm* 186 mm* 270 mm*
Max. diameter of the shoe bit 139.7 mm* 244.5 mm* 311.15 mm*
Total length 6 650 mm 6 650 mm 8 550 mm
Weight 300 kg 1 000 kg 1 900 kg
Top sub * * *
Bottom sub 3 ½ Reg (box) 4 ½ Reg (box) 6 5/8 Reg (box)
WOB weight 10 000 daN 30 000 daN 40 000 daN
Flow rate 360 – 720 LPM 1 500 – 2 100 LPM 1 800 – 3 000 LPM
Pressure drop 18 – 30 Bar 19 – 35 Bar 12 – 25 Bar
Speed at no load 100 – 200 RPM 84 – 154 RPM 90 – 150 RPM
Rev/Unit volume 0.27 rev/l 0.07 rev/l 0.046 rev/l
Max. allowable differential pressure 72 Bar 60 Bar 72 Bar
Speed at max. power 90 – 180 RPM 60 – 110 RPM 66 – 114 RPM
Torque at max. power 5 150 N·m 8 400 N·m 6 000 N·m
Overpull to Yield 92 000 daN 290 000 daN 500 000 daN
Max Working temperature 150°С 150°С 150°С
Assigned run time 150 hours 150 hours 150 hours
Compatibility with OBM & WBM Yes Yes Yes
Material type Alloy steel 4340 Alloy steel 4340 Alloy steel 4340

Safety Sub Parameters

Size (mm) 114 178 244
Description SS450ND SS700ND SS962ND
Outer diameter of the housing 128.6 mm 186 mm 270 mm
Total length 920 mm 1 000 mm 1 000 mm
Activation pressure 150 – 250 Bar 120 – 160 Bar 120 – 160 Bar
Pass through ID TFA 2 826 mm.sq. 19 945.5 mm.sq. 39 528.9 mm.sq.
Ports Total Flow Area, TFA 2 056 mm.sq. 5 224 mm.sq. 5 224 mm.sq.
Connection thread * * *
* - according to customer requirements
 Motorized Shoe Reamer
Drillable Shoe

Motorized drillable casing reaming shoe aims to facilitate RIH casing, liner of any other
completions string. The reaming shoe builds back open hole following various complications
by removing cuttings, ledges and keyseats, swelling formations, etc.
Operated similar to drilling motor with differential pressure, which allows for reaming
parameters control. Cementing jobs done same way as with standard float shoes.
After casing cemented in place the shoe is drilled out with next section PDC bit.

Features Benefits
► All features and benefits of Non-drillable shoe
► High-torques generated by drillable power section
► Powered by mud flow similar to drilling motor
► Operations and loads controlled through differential pressure
► Wellbore is additionally cleaned with mud flow jetting effect through the shoe nose nozzles
► Shoe nose can be blank or armed with tungsten carbide inserts and/or PDC cutters
► Shoe is completely PDC drillable with pass though ID of next section drill bit
 Motorized Shoe Reamer
Drillable shoe Specification
Specification (Imperial)
Size (in) 7 9 5/8
Description FS700 FS962
Outer diameter of the housing 7.32 in* 10.63 in*
Outer diameter of the stabilizer 8.22 in* 11.1 in*
Maximum diameter of the drill-through bit 6.13 in* 8.69 in*
Maximum shoe diameter 8.27 in* 11.4 in*
Total length 7.71 ft 9.19 ft
Weight 432 lb 1 104 lb
Top sub * *
WOB weight 33 069 lbf 33 069 lbf
Flow rate 396 – 554 GPM 475 – 792 GPM
Pressure drop 174 – 261 Psi 174 – 362 Psi
Speed at no load 114 – 150 RPM 90 – 150 RPM
Rev/Unit volume 0.29 rev/gal 0.19 rev/gal
Max. allowable differential pressure 290 psi 435 psi
Speed at max. power 90 – 114 RPM 66 - 114 RPM
Torque at max. power 5 162 ft·lbf 4 425 ft·lbf
Overpull to Yield 308 646 lbf 308 646 lbf
Max Working temperature 302°F 302°F
Assigned run time 150 hours 150 hours
Compatibility with OBM & WBM Yes Yes

Safety Sub Specififcations

Size (in) 7 9 5/8
Description SS700 SS962
Outer diameter of the housing 7.32” 10.63 in*
Total length 3.28 ft 3.28 ft
Activation pressure 1 740 – 2320 PSI 1 740 – 2320 PSI
Pass through ID TFA 30.91 in.sq. 61.27 in.sq.
Ports Total Flow Area, TFA 8.1 in.sq. 8.1 in.sq.
Connection thread * *
* according to customer requirements

Specification (Metric)
Size (mm) 178 244
Description FS700 FS962
Outer diameter of the housing 186 mm* 270 mm*
Outer diameter of the stabilizer 208.76 mm* 282 mm*
Maximum diameter of the drill-through bit 155.6 mm* 220,7 mm*
Maximum shoe diameter 210 mm* 290 mm*
Total length 2 350 mm 2 800 mm
Weight 196 kg 501 kg
Top sub * *
WOB weight 15 000 daN 15 000 daN
Flow rate 1 500 – 2 100 LPM 1 800 – 3 000 LPM
Pressure drop 12 – 18 Bar 12 – 25 Bar
Speed at no load 114 – 150 RPM 90 – 150 RPM
Rev/Unit volume 0.076 rev/l 0.046 rev/l
Max. allowable differential pressure 20 Bar 30 Bar
Speed at max. power 90 – 114 RPM 66 – 114 RPM
Torque at max. power 7 000 N·m 6 000 N·m
Overpull to Yield 140 000 daN 140 000 daN
Max Working temperature 150°С 150°С
Assigned run time 150 hours 150 hours
Compatibility with OBM & WBM Yes Yes
Material of drillable reaming shoe parts Rubber / duralumin Rubber / duralumin

Safety Sub Specifications

Size (mm) 178 244
Description SS700 SS962
Outer diameter of the housing 186 mm 270 mm
Total length 1000 mm 1 000 mm
Activation pressure 120 – 160 Bar 120 – 160 Bar
Pass through ID 159.4 mm 224.4 mm
Pass through ID TFA 19 945.5 mm.sq. 39 528.9 mm.sq.
Ports Total Flow Area, TFA 5 224 mm.sq. 5 224 mm.sq.
Connection thread * *
* - according to customer requirements
Supreme Quality and
Performance