8/9/2014 Computer BIOS beep codes - when your computer fails to boot

Search

Home
Blog
Contact

Components
Troubleshooting
Terms
Network
Virus

Computer buying guide

Choosing the components
Build your own computer
Speed up your computer
Watch TV on your computer

BIOS Beep Codes

When your computer won't boot and starts to beep, it's actually telling you it's having problems with the
hardware or BIOS, however there are different types of motherboard with different beeping codes.

http://www.computer-build.com/bios-beep-codes.html 1/7
8/9/2014 Computer BIOS beep codes - when your computer fails to boot

I've compiled a list of beeping codes for your use:

HP and Compaq bios beep codes

Beeps Meaning
1 short beep and 1 long beep Memory problem
2 short beeps and 1 long beep (repeats 5 times) Problems with the video card
3 short beeps and 1 long beep CPU configuration error, problems with the CPU

Beep codes for an AMI motherboard

Beeps Meaning
1 beep DRAM refresh failure. There is a problem in the system memory or the motherboard.
2 beeps Memory parity error. The parity circuit is not working properly.
3 beeps Base 64K RAM failure. There is a problem with the first 64K of system memory.
System timer not operational. There is problem with the timer(s) that control functions on
4 beeps
the motherboard.
5 beeps Processor failure. The system CPU has failed.
Gate A20/keyboard controller failure. The keyboard IC controller has failed, preventing
6 beeps
gate A20 from switching the processor to protect mode.
7 beeps Virtual mode exception error.
Video memory error. The BIOS cannot write to the frame buffer memory on the video
8 beeps
card.
9 beeps ROM checksum error. The BIOS ROM chip on the motherboard is likely faulty.
CMOS checksum error. Something on the motherboard is causing an error when trying to
10 beeps
interact with the CMOS.
11 beeps Bad cache memory. An error in the level 2 cache memory.
1 long
beep, 2 Failure in the video system.
short
1 long
beep, 3 A failure has been detected in memory above 64K.
short
1 long
beep, 8 Display test failure.
short

http://www.computer-build.com/bios-beep-codes.html 2/7
8/9/2014 Computer BIOS beep codes - when your computer fails to boot

Beep codes for a Phoenix motherboard

Beeps Meaning
Continuous
A problem with the memory or video.
beeping
1-1-1-3 Faulty CPU/motherboard. Verify real mode.
1-1-2-1 Faulty CPU/motherboard.
1-1-2-3 Faulty motherboard or one of its components.
Faulty motherboard or one of its components. Initialize chipset registers with initial
1-1-3-1
POST values.
1-1-3-2 Faulty motherboard or one of its components.
1-1-3-3 Faulty motherboard or one of its components. Initialize CPU registers.
1-1-3-2
1-1-3-3 Failure in the first 64K of memory.
1-1-3-4
1-1-4-1 Level 2 cache error.
1-1-4-3 I/O port error.
1-2-1-1 Power management error.
1-2-1-2
Faulty motherboard or one of its components.
1-2-1-3
1-2-2-1 Keyboard controller failure.
1-2-2-3 BIOS ROM error.
1-2-3-1 System timer error.
1-2-3-3 DMA error.
1-2-4-1 IRQ controller error.
1-3-1-1 DRAM refresh error.
1-3-1-3 A20 gate failure.
1-3-2-1 Faulty motherboard or one of its components.
1-3-3-1 Extended memory error.
1-3-3-3
1-3-4-1 Error in first 1MB of system memory.
1-3-4-3
1-4-1-3
CPU error.
1-4-2-4
1-4-3-1
BIOS ROM shadow error.
2-1-4-1
1-4-3-2
Level 2 cache error.
1-4-3-3
1-4-4-1
1-4-4-2 Faulty motherboard or one of its components.
2-1-1-1
http://www.computer-build.com/bios-beep-codes.html 3/7
8/9/2014 Computer BIOS beep codes - when your computer fails to boot

2-1-1-3 IRQ failure.

2-1-2-1
2-1-2-3 BIOS ROM error.
2-1-2-4
I/O port failure.
2-1-3-2
2-1-3-1
Video system failure.
2-1-3-3
2-1-1-3
IRQ failure.
2-1-2-1
2-1-2-3 BIOS ROM error.
2-1-2-4 I/O port failure.
2-1-4-3
Video card failure.
2-2-1-1
2-2-1-3
2-2-2-1 Keyboard controller failure.
2-2-2-3
2-2-3-1 IRQ error.
2-2-4-1 Error in first 1MB of system memory.
2-3-1-1
Extended memory failure.
2-3-3-3
2-3-2-1 Faulty motherboard or one of its components.
2-3-2-3
Level 2 cache error.
2-3-3-1
2-3-4-1
Motherboard or video card failure.
2-3-4-3
2-3-4-1
2-3-4-3 Motherboard or video card failure.
2-4-1-1
2-4-1-3 Faulty motherboard or one of its components.
2-4-2-1 RTC error.
2-4-2-3 Keyboard controller error.
2-4-4-1 IRQ error.
3-1-1-1
3-1-1-3
I/O port error.
3-1-2-1
3-1-2-3
3-1-3-1
Faulty motherboard or one of its components.
3-1-3-3
3-1-4-1
3-2-1-1 Floppy drive or hard drive failure.
3-2-1-2
3-2-1-3 Faulty motherboard or one of its components.

http://www.computer-build.com/bios-beep-codes.html 4/7
8/9/2014 Computer BIOS beep codes - when your computer fails to boot

3-2-2-1 Keyboard controller error.

3-2-2-3
3-2-3-1 Faulty motherboard or one of its components.
3-2-4-1
3-2-4-3 IRQ error.
3-3-1-1 RTC error.
3-3-1-3 Key lock error.
3-3-3-3 Faulty motherboard or one of its components.
3-3-3-3
3-3-4-1
3-3-4-3
3-4-1-1
3-4-1-3
Faulty motherboard or one of its components.
3-4-2-1
3-4-2-3
3-4-3-1
3-4-4-1
3-4-4-4
4-1-1-1 Floppy drive or hard drive failure.
4-2-1-1
4-2-1-3 IRQ failure.
4-2-2-1
4-2-2-3
4-2-3-1
Faulty motherboard or one of its components.
4-2-3-3
4-2-4-1
4-2-4-3 Keyboard controller error.
4-3-1-3
4-3-1-4
4-3-2-1
4-3-2-2 Faulty motherboard or one of its components.
4-3-3-1
4-3-4-1
4-3-4-3
4-3-3-2
IRQ failure.
4-3-3-4
4-3-3-3
Floppy drive or hard drive failure.
4-3-4-2
1-1-2 Faulty CPU/motherboard.
1-1-3 Faulty motherboard/CMOS read-write failure.
1-1-4 Faulty BIOS/BIOS ROM checksum error.
System timer not operational. There is a problem with the timer(s) that control
1-2-1
functions on the motherboard.
1-2-2
Faulty motherboard/DMA failure.
http://www.computer-build.com/bios-beep-codes.html 5/7
8/9/2014 Computer BIOS beep codes - when your computer fails to boot

1-2-3
1-3-1 Memory refresh failure.
1-3-2
1-3-3 Failure in the first 64K of memory.
1-3-4
1-4-1 Address line failure.
1-4-2 Parity RAM failure.
1-4-3 Timer failure.
1-4-4 NMI port failure.
2-_-_ Any combination of beeps after 2 indicates a failure in the first 64K of memory.
3-1-1 Master DMA failure.
3-1-2 Slave DMA failure.
3-1-3
Interrupt controller failure.
3-1-4
3-2-4 Keyboard controller failure.
3-3-1
CMOS error.
3-3-2
3-3-4 Video card failure.
3-4-1 Video card failure.
4-2-1 Timer failure.
4-2-2 CMOS shutdown failure.
4-2-3 Gate A20 failure.
4-2-4 Unexpected interrupt in protected mode.
4-3-1 RAM test failure.
4-3-3 Timer failure.
4-3-4 Time of day clock failure.
4-4-1 Serial port failure.
4-4-2 Parallel port failure.
4-4-3 Math coprocessor.

Remember that this is a short list, it is not a complete list. Your motherboard also comes with a manual
with the specific bios beep codes for that motherboard. Sometimes it's hard to determine your specific
computer bios beep codes, and I've had to call sometimes the manufacturer to know for sure which bios
beep codes fit my computer.

<- Back to computer virus

http://www.computer-build.com/bios-beep-codes.html 6/7
8/9/2014 Computer BIOS beep codes - when your computer fails to boot

How to use them

Use the bios beep codes whenever your computer won't boot up and starts to beep or make sounds.

There are different combinations of beep codes for different types of motherboards.

Not all the beep codes are displayed in this page.

Your motherboard manual has this beep codes too.

You can find more bios beep codes here.

Messages?
Everytime your computer doesn't respond or it's having a hard time booting or loading Windows, you
should expect an error message, these messages can come in the form of a beep sound or a text message.
Use this beep code table to determine which problem your computer may have.

© 2010 Company Name | website templates by styleshout

Home | Site Map | 'Blog

http://www.computer-build.com/bios-beep-codes.html 7/7