TRS Heat recovery unit with enthalpy exchanger

2016

TRSCP1

TRSCPR1

• QUICK AND EASY INSTALLATION

• FANS COUPLED TO BRUSHLESS DC MOTORS WITH
LOW ENERGY CONSUMPTION
Features
The TRS heat recovery units allow to join maximum lowing the extraction or input of air across multiple • Galvanised sheet metal self-supporting panels
environmental comfort with sure energy saving. environments simultaneously. with insulation.
Forced ventilation must be created in current air • Very compact units that can only be installed • Air filters both on the exhaust air (M5 class filter)
conditioning and treatment plants, which leads horizontally, which require simple maintenance and the air renewal (F7 class filter), removable
to the expulsion of treated air, determining large of the heat exchanger and filters (both remov- laterally to be cleaned or replaced.
energy consumption and increase in costs. able from the side). • Silent operation.
TRS intends to solve these problems using a static • Automatic free-cooling function. • The installation does not require a condensate
heat recovery unit that saves most of the energy • Free-cooling in mid-season thanks to the auto- drain system.
that would otherwise be lost. matic by-pass function.
The unit adopts high-efficiency heat recovery • Double suction centrifugal fans coupled directly
with countercurrent flows which consists of flat to the high-efficiency Brushless DC electric
sheets of special paper that allow you to recover motors, equipped with adjustable speeds via an
both sensible and latent heat (humidity). electronic control to vary the flow rate.
No condensation forms by adopting the enthalpy • Controlling selectable units between flush
recovery unit: part of the humidity in a flow of air is control panel with an LCD display (TRSCP1 ac-
absorbed by the porous surface and is then trans- cessory) or a kit with flush control panel with a
ferred completely to the opposite air flow. There- remote-controlled LCD display (TRSCPR1 acces-
fore, no condensate drip tray or the relative sory).
drain pipe is required. The high static pressures • Hexagonal-shaped enthalpy recovery unit to
available allow ducts to be mounted, thereby al- increase the exchange surface.

Accessories
The following accessories are available for complete control of the TRS recovery units:

• TRSCP1: Flush control panel with an LCD • TRSCPR1: Remote control and flush control junction boxes "module 502".
display to control the On-Off, speed selection, panel with an LCD display to control the On-Off,
programmable weekly timer and the automatic speed selection, programmable weekly timer and
Free-Cooling functions. IR receiver for coupled the automatic Free-Cooling functions. IR receiver
operation with the IR remote control accessory. for coupled operation with the IR remote control
Wall installation recessed in supplied electrical accessory.
junction boxes "module 502". Wall installation recessed in supplied electrical

Accessories compatibility
TRS 250 350 500 800 1000 1200
TRSCP1 • • • • • •
TRSCPR1 • • • • • •
Technical data
TRS 250 350 500 800 1000 1200
High-speed m3/h 260 330 500 750 950 1180
Air flow rate Average speed m3/h 260 330 500 660 740 1080
Low speed m3/h 170 250 360 560 600 980
High-speed Pa 70 70 70 70 70 80
Nominal static pressure (1) Average speed Pa 70 70 70 50 40 70
Low speed Pa 30 40 35 35 25 55
High-speed dB(A) 27 31 33 38 39 42
Sound pressure level (2) Average speed dB(A) 26 29 31 36 37 37
Low speed dB(A) 22 25 27 32 33 32
Max input current A 1.1 1.4 2 2.8 3 3.7
Max input power W 90 120 135 300 310 490
Internal specific fan power (1) W/m3/s 1043 1032 1178 990 1238 1570
Winter conditions (3)
Efficiency in temperature % 75.4 (75.5) 77.6 (77.6) 76.5 (76.5) 73 (73) 73.5 (73.5) 71 (71)
Efficiency in enthalpy % 61 (61) 63.7 (64) 62.3 (64) 59 (61) 59.5 (61) 56.2 (56.2)
Recovered power kW 2.2 (2.4) 3.1 (3.4) 4.3 (4.8) 6.5 (7.3) 8.2 (9.0) 9.1 (10.8)
Summer conditions (4)
Efficiency in temperature % 62 63 62.5 59 59.5 57
Efficiency in enthalpy % 60 61 60 57 57.5 54
Recovered power kW 0.8 1.2 1.7 2.5 3.2 3.7
Electric power supply V/ph/Hz 230 / 1 / 50
All recovery units have a minimum dry performance of 67%, measured according to EN308, at outside air conditions of 5°C, and extracted air at 25°C, with a
balanced mass flow.
(1) Values referring to the nominal air flow rate including recovery unit and filters.
(2) Referring to 1.5 metres from machine intake in free field.
(3) Winter nominal conditions: Outdoor air: -5°C (-10°C) DB, RH 80%; Ambient air: 20°C DB, RH 50%.
(4) Summer nominal conditions: Outdoor air: 32°C DB, RH 50%; Ambient air: 26°C DB, RH 50%.

Dimensional data (mm)

Inspection panel Electrical panel

Wired control panel

TRSCP1

Air expelledExhaust air Remote control

TRSCPR1
Fresh air Fresh air

Model Size [mm] Net / gross weight Packaging dimen-

A A1 A2 B B1 B2 C D D1 Ød E [kg] sions [mm]
TRS250 885 815 1074 666 720 779 272 342 342 150 110 27 / 32 1125x830x345
TRS350 885 815 1074 806 860 919 272 482 482 150 110 32 / 38 1125x985x345
Code: STRSUY.01 / 1605

TRS500 970 910 1130 997 1053 1112 312 728 728 200 38 42 / 49 1190x1150x386
TRS800 1322 1252 1486 882 936 994 390 431 431 250 169 63 / 70 1545x1030x470
TRS1000 1322 1252 1486 1132 1186 1244 390 681 681 250 169 76 / 86 1545x1280x470
TRS1200 1322 1252 1486 1132 1186 1244 390 681 681 250 169 76 / 86 1545x1280x470

Aermec reserves the right to make all the modifications deemed Aermec S.p.A.
necessary for improving the product, including technical data. Via Roma, 996 - 37040 Bevilacqua (VR) - Italy
Tel. +39 0442633111 - Fax +39 044293577
www.aermec.com