FT - Optima EG 260 M
FT - Optima EG 260 M
FT - Optima EG 260 M
CHRYSO®Optima EG 260 M
and jobsite applications, where workability mechanical performance are sought and required
retention, pumpability, mechanical strength and All types of cement
durability are required. High Rise Concrete
Its specifically designed molecular structure makes High Performance Concrete
Ready-mix and Jobsite concrete
it possible the use of wide variety of raw materials,
Precast concrete
while giving the concrete exceptional properties.
Self Compacting and Self Levelling Concrete
CHRYSO®Optima EG 260 M enables the concrete Concrete of humid, plastic or fluid consistency
manufacturer to produce cohesive concrete with High strength concrete with excellent
low viscosity, long workability retention, while workability retention
reducing the water/cement ratio. Compatible with Micro silica, GGBS and Fly Ash
On account of all these characteristics, CHRYSO®
Optima EG 260 M is a superplasticizer which is
particularly adapted for use on construction sites
and in the ready-mix concrete industry.
Benefits
About CHRYSO
Enhancement of concrete pumpability, Worldwide leader for cement and concrete
flowability, placeability and workability retention additives for over 70 years, CHRYSO has been
Reduction of concrete viscosity designing, producing, specifying and delivering its
High water reduction properties added-value solutions to the construction
Enhancement of the binder hydration, allowing a professionals with outstanding innovation and
substantial water reduction and increase in both quality service.
early age and ultimate compressive strength As a result, CHRYSO’s brand and products have
been associated with the most prestigious and
demanding construction projects over the globe
CONCRETE ADMIXTURE
CHRYSO®Optima EG 260 M
Made in Egypt by IDP for Chemicals, under license from CHRYSO SAS
3 Hassan Sabry st., Zamalek, 11211 CAIRO, Egypt
Tel. (+202) 35390555 Fax. (+202) 35390566
www.chryso.com
The information contained in this document is given to the best of our knowledge and is the result of extensive and controlled testing. However,
it cannot under any circumstances be considered as a warranty involving our liability in the case of misuse. Tests should be conducted before the
product is used to ensure that the methods and conditions of use of the product are satisfactory. Our specialists remain at the disposal of
customers if they require help with the application of the product for their specific needs.