Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 27 views

    Pu Dead Matt White Datasheet

    Uploaded by

    Khushal Jangid
    PU DEAD MATT # 551 WHITE is a pigmented topcoat formulated for wood application to provide a satin finish. It is intended for use on interior wood furniture, cabinets, doors and frames. The product should be applied in 1-2 coats over a primed surface using conventional spraying methods. Proper storage, application techniques, and safety precautions are outlined.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Pu Dead Matt White Datasheet

    Uploaded by

    Khushal Jangid
    27 views1 page
    PU DEAD MATT # 551 WHITE is a pigmented topcoat formulated for wood application to provide a satin finish. It is intended for use on interior wood furniture, cabinets, doors and frames. The product should be applied in 1-2 coats over a primed surface using conventional spraying methods. Proper storage, application techniques, and safety precautions are outlined.

    Original Description:

    Original Title

    PU-DEAD-MATT-WHITE-DATASHEET

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    PU DEAD MATT # 551 WHITE is a pigmented topcoat formulated for wood application to provide a satin finish. It is intended for use on interior wood furniture, cabinets, doors and frames. The product should be applied in 1-2 coats over a primed surface using conventional spraying methods. Proper storage, application techniques, and safety precautions are outlined.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    27 views1 page

    Pu Dead Matt White Datasheet

    Uploaded by

    Khushal Jangid
    PU DEAD MATT # 551 WHITE is a pigmented topcoat formulated for wood application to provide a satin finish. It is intended for use on interior wood furniture, cabinets, doors and frames. The product should be applied in 1-2 coats over a primed surface using conventional spraying methods. Proper storage, application techniques, and safety precautions are outlined.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    PU DEAD MATT # 551 WHITE

    General Description: Method of Application:


    PU DEAD MATT # 551 WHITE is a pigmented • The surface to be coated should be
    topcoat based on poly – functional saturated primed with PU or Polyester Primer.
    polyesters. It is formulated for wood application
    • It should be cleaned, well – sanded and
    to give an excellent satin finish with good
    free from dust, oil, water and other
    covering properties.
    contaminants.
    Major Uses: • To a well-prepared surface, apply 1 – 2
    PU DEAD MATT # 551 WHITE is excellent for
    coats of PU DEAD MATT # 551 WHITE,
    wood furniture, cabinets, bed sets, interior
    horizontally and vertically
    doors and frames.
    • PU Dead Matt # 551 White when applied
    Advantages: by curtain coater, the viscosity of the
    For interior/exterior application. lacquer should be controlled and
    Excellent hardness. monitored for the continuity of the finish.
    Excellent weather resistance. • One coat may be sufficient for ordinary
    Good adhesion and abrasion properties finish however; one additional coat can
    Characteristics and Physical be applied wet on wet if necessary. Light
    Properties: sanding with 400 ~ 600 mesh sand
    Appearance Liquid white paper is recommended before
    Specific weight 1.290 +/- 0.005 kg/L subsequent coats, when recoating time
    Viscosity (FC # 4 @250C 60 – 75” exceeds 3 hrs.
    Flash point 240C Storage:
    Non-volatile (%wt.) 60 +/- 0.5
    Shelf life 12 months minimum if stored below
    Gloss (600) < 50
    250C.
    Application condition:
    Air temperature 5 ~ 350C Packing:
    Relative humidity 85% maximum Available in 1Usg, 20 lit. Pail and 200lit Drum.
    Application method Automatic or
    conventional Spray Cleaning of Tools:
    Recommended catalyst Catalyst # 013 All tools should be cleaned with Wash Thinner
    Thinner PU Thinner # 105/205 or PU Thinner # 105.
    Mixing/Dilution ratio Base:Catalyst: Thinner
    (Visc: 13~15” FC # 4) 100 : 50 : 20-25 Physiological Hazards:
    Pot life (250C) 2 – 3 hours PU DEAD MATT # 551 WHITE and Catalyst #
    Drying time: 013 do not contain dangerous solvents,
    Dust free 15 – 17 min nevertheless, good ventilation in working rooms
    To touch 45 – 60 min
    Recoat 2 – 3 hours is recommended as well as the use of safety
    hard 24 – 36 hours tools and equipment. PU DEAD MATT # 551
    Coating rate 6 – 8 m2/L WHITE is flammable and harmful if swallowed. If
    Basecoat PU Primer 153 / SP contact with eyes or skin occurs, wash well with
    and Plastofil 350
    fresh water and seek immediate medical advice.

    The above information is given to the best of our knowledge based on laboratory test and practical experience. However, as the paint is often used under
    condition beyond our control, we cannot guarantee anything but the quality of the paint itself. We reserve the right to change the given data without prior notice.

    MAS PAINTS & CHEMICAL INDUSTRY


    P.O. BOX NO: 23085, SAJJAH INDUSTRIAL AREA, SHARJAH, U.A.E
    TEL NO: 009716 5311777; FAX: 009716 5311330
    Website : http://www.mas-paints.com
    Email : masuae@emirates.net.ae

    You might also like