ACER k130

Acer Projector
K130/L220/LK-W11 Series
User's Guide
Downloaded from www.Manualslib.com manuals search engine

Copyright © 2011. Acer Incorporated.
All Rights Reserved.
Acer Projector K130/L220/LK-W11 Series User's Guide

Original Issue: 12/2011
Changes may be made periodically to the information in this publication without obligation
to notify any person of such revisions or changes. Such changes will be incorporated in new
editions of this manual or supplementary documents and publications. This company makes
no representations or warranties, either expressed or implied, with respect to the contents
hereof and specifically disclaims the implied warranties of merchantability or fitness for a
particular purpose.
Record the model number, serial number, purchase date and place of purchase information in
the space provided below. The serial number and model number are recorded on the label
affixed to your projector. All correspondence concerning your unit should include the serial
number, model number and purchase information.
No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in

any form or by any means, electronically, mechanically, by photocopy, recording or otherwise,
without the prior written permission of Acer Incorporated.
Acer Projector K130/L220/LK-W11 Series
Model number: __________________________________
Serial number: ___________________________________
Date of purchase: ________________________________
Place of purchase: ________________________________
Acer and the Acer logo are registered trademarks of Acer Incorporated. Other companies' product
names or trademarks are used herein for identification purposes only and belong to their respective
companies.
"HDMITM, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC."

iii
Information for your safety and

comfort
Read these instructions carefully. Keep this document for future reference.
Follow all warnings and instructions marked on the product.
Turning the product off before cleaning

Unplug this product from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for cleaning.
Caution for plug as disconnecting device

Observe the following guidelines when connecting and disconnecting power to
the external power supply unit:
• Install the power supply unit before connecting the power cord to the AC
power outlet.
• Unplug the power cord before removing the power supply unit from the
projector.
• If the system has multiple sources of power, disconnect power from the
system by unplugging all power cords from the power supplies.
Caution for Accessibility

Be sure that the power outlet you plug the power cord into is easily accessible
and located as close to the equipment operator as possible. When you need to
disconnect power to the equipment, be sure to unplug the power cord from the
electrical outlet.
Warnings!
• Do not use this product near water.

• Do not place this product on an unstable cart, stand or table. If the product
falls, it could be seriously damaged.
• Slots and openings are provided for ventilation to ensure reliable
operation of the product and to protect it from overheating. These
openings must not be blocked or covered. The openings should never be
blocked by placing the product on a bed, sofa, rug or other similar surface.
This product should never be placed near or over a radiator or heat register, or
in a built-in installation unless proper ventilation is provided.
• Never push objects of any kind into this product through cabinet slots as
they may touch dangerous voltage points or short-out parts that could
result in a fire or electric shock. Never spill liquid of any kind onto or into
the product.

iv
• To avoid damage of internal components and to prevent battery leakage,

do not place the product on a vibrating surface.
• Never use it under sporting, exercising, or any vibrating environment
which will probably cause unexpected short current or damage rotor
devices.
Using electrical power

• This product should be operated from the type of power indicated on the
marking label. If you are not sure of the type of power available, consult
your dealer or local power company.
• Do not allow anything to rest on the power cord. Do not locate this
product where people will walk on the cord.
• If an extension cord is used with this product, make sure that the total
ampere rating of the equipment plugged into the extension cord does not
exceed the extension cord ampere rating. Also, make sure that the total
rating of all products plugged into the wall outlet does not exceed the fuse
rating.
• Do not overload a power outlet, strip or receptacle by plugging in too
many devices. The overall system load must not exceed 80% of the branch
circuit rating. If power strips are used, the load should not exceed 80% of
the power strip's input rating.
• This product's AC adapter is equipped with a three-wire grounded plug.
The plug only fits in a grounded power outlet. Make sure the power outlet
is properly grounded before inserting the AC adapter plug. Do not insert
the plug into a non-grounded power outlet. Contact your electrician for
details.
Warning! The grounding pin is a safety feature. Using a power outlet that is
not properly grounded may result in electric shock and/or injury.
Note: The grounding pin also provides good protection from unexpected
noise produced by other nearby electrical devices that may interfere with
the performance of this product.
• Use the product only with the supplied power supply cord set. If you need
to replace the power cord set, make sure that the new power cord meets
the following requirements: detachable type, UL listed/CSA certified, VDE
approved or its equivalent, 4.5 meters (15 feet) maximum length.

v
Product servicing
Do not attempt to service this product yourself, as opening or removing covers
may expose you to dangerous voltage points or other risks. Refer all servicing to
qualified service personnel.
Unplug this product from the wall outlet and refer servicing to qualified service
personnel when:
• the power cord or plug is damaged, cut or frayed
• liquid was spilled into the product
• the product was exposed to rain or water
• the product has been dropped or the case has been damaged
• the product exhibits a distinct change in performance, indicating a need
for service
• the product does not operate normally after following the operating
instructions
Note: Adjust only those controls that are covered by the operating
instructions, since improper adjustment of other controls may result in
damage and will often require extensive work by a qualified technician to
restore the product to normal condition.
Warning! For safety reasons, do not use non-compliant parts when adding
or changing components. Consult your reseller for purchase options.
Your device and its enhancements may contain small parts. Keep them out of
the reach of small children.
Additional safety information

• Do not look into the projector's lens when the light is on. The bright may
hurt your eyes.
• Turn on the projector first and then signal sources
• Do not place the product in following environments:
• Space that is poorly ventilated or confined. At least 50cm clearance from walls
and free flow of air around the projector is necessary.
• Locations where temperatures may become excessively high, such as inside of a
car with all windows rolled up.
• Locations where excessive humidity, dust, or cigarette smoke may contaminate
optical components, shortening the life span and darkening the image.
• Locations near fire alarms.
• Locations with an ambient temperature above 40 ºC/104 ºF.
• Locations where the altitudes are higher than 10000 feet.
• Unplug immediately if there is something wrong with your projector. Do
not operate if smoke, strange noise or odor comes out of your projector. It

vi
might cause fire or electric shock. In this case, unplug immediately and
contact your dealer.
• Do not keep using this product to break or drop it. In this case contact your
dealer for inspection.
• Do not face the projector lens to the sun. It can lead to fire.
• When switching the projector off, suggest to ensure the projector
completes its cooling cycle before disconnecting power.
• Do not frequently turn off the main power abruptly or unplug the
projector during operation. The best way is to wait for the fan to turn off
before turning main power off.
• Do not touch air outlet grille and bottom plate which becomes hot.
• Clean the air filter frequently if have. The temperature inside may rise and
cause damage when the filter/ventilation slots clogged with dirt or dust.
• Do not look into the air outlet grille when projector is operating. It may
hurt your eyes.
• Always open the lens shutter or remove the lens cap when the projector is
on.
• Do not block the projector lens with any object when the projector is
under operation as this could cause the object to become heated and
deformed or even cause a fire.
• Do not attempt to disassemble this projector. There are dangerous high
voltages inside which may hurt you. Refer servicing only to suitable
qualified professional service personnel.
• Do not stand the projector on end vertically. It may cause the projector to
fall over, causing injury or damage.
Caution for Listening

To protect your hearing, follow these instructions.
• Increase the volume gradually until you can hear clearly and comfortably.
• Do not increase the volume level after your ears have adjusted.
• Do not listen to music at high volumes for extended periods.
• Do not increase the volume to block out noisy surroundings.
• Decrease the volume if you can't hear people speaking near you.

vii
Disposal instructions
Do not throw this electronic device into the trash when discarding. To minimize
pollution and ensure utmost protection of the global environment, please
recycle. For more information on the Waste from Electrical and Electronics
Equipment (WEEE) regulations, visit
http://www.acer-group.com/public/Sustainability/sustainability01.htm

viii
First things first

Usage Notes
Do:
• Turn off the product before cleaning.
• Use a soft cloth moistened with mild detergent to clean the display
housing.
• Disconnect the power plug from AC outlet if the product is not being used
for a long period of time.
Don't:
• Block the slots and openings on the unit provided for ventilation.
• Use abrasive cleaners, waxes or solvents to clean the unit.
• Use under the following conditions:
• In extremely hot, cold or humid environments.
• In areas susceptible to excessive dust and dirt.
• Near any appliance that generates a strong magnetic field.
• Place In direct sunlight.
Precautions
Follow all warnings, precautions and maintenance as recommended in this
user's guide to maximize the life of your unit.
Warning:
• Do not look into the projector's lens when the light is on. The bright may hurt your
eyes.
• To reduce the risk of fire or electric shock, do not expose this product to rain or
moisture.
• Please do not open or disassemble the product as this may cause electric shock.
• When switching the projector off, please ensure the projector completes its cooling
cycle before disconnecting power.
• Turn on the projector first and then the signal sources.
• Do not use lens cap when projector is in operation.

Information for your safety and comfort iii
Contents
First things first viii
Usage Notes viii
Precautions viii
Introduction 1
Product Features 1
Package Overview 2
Projector Overview 3
Projector Outlook 3
Control Panel 4
Remote Control Layout 5
Getting Started 7
Connecting the Projector 7
Turning the Projector On/Off 8
Turning on the Projector 8
Turning the projector off 9
Adjusting the Projected Image 10
Adjusting the Height of Projected Image 10
How to optimize image size and distance 11
User Controls 13
Installation menu 13
Acer Empowering Technology 14
Onscreen Display (OSD) Menus 15
Color 16
Image 17
Setting 19
Management 19
Audio 20
3D 20
Language 21
How to Play iPhone/iPod/iPad Media via
K130/L220/LK-W11 22
How to play photos 22

How to play videos 24
Appendices 25
Troubleshooting 25
LED & Alarm Definition Listing 29
Specifications 30
Compatibility modes 32
Regulations and safety notices 36

1
Introduction
English
Product Features
This product is a single-chip DLP® projector. Outstanding features include:
• DLP® technology
• 1280 x 800 WXGA resolution

4:3/16:9/Full/L.Box aspect ratio supported
• Versatile display modes (Bright, Presentation, Standard,Video, Picture,

Game, User) enable optimum performance in any situation
• NTSC/PAL/SECAM compatible and HDTV (480i/p, 576i/p, 720p, 1080i/p)

supported
• Compact size projector facilitates business purposes and home

entertainment.
• Acer EcoProjeciton Technology delivers Intelligent power management

approach and physical efficiency improvement
• Empowering Key reveals Acer Empowering Technology utilities (Acer

eView, eTimer, e3D, ePower Management) for easy adjustment of settings
• Equipped with HDMITM connection supporting HDCP
• Advanced digital keystone correction delivers optimum presentations
• Multi-language on screen display (OSD) menus
• 1.67x digital zoom and pan move function
• Environmental light source and longer life by LED solution.
• Enjoy media playback via USB, RAM and Micro SD card reader.
• Microsoft® Windows® 2000, XP, Vista® Windows® 7, Macintosh® OS

compliant

2
Package Overview
English
This projector comes with all the items shown below. Check to make sure your
unit is complete. Contact your dealer immediately if any thing is missing.
Projector Power cord AC to DC power adapter
3.5 mm jack A/V cable Universal to D-sub and Remote control

Audio out cable
XXXXXX
3V
Battery User's Guide x2 Quick start guide
Adapter for iPod/iPhone/ Carrying case

iPad (Optional) (Optional)

3
Projector Overview
English
Projector Outlook
Front / upper side
4
5
6
3
2
1
# Description # Description
1 Projection lens 4 Power button
2 Tilt adjusting wheel 5 Control panel
3 Focus ring 6 Remote control receiver
Rear side
1 2 3
micro USB
HDMI AV IN DC IN
UNIVERSAL I/O
4 5 6 7
1 Remote control receiver 5 HDMI connector
2 MicroSD Card Slot 6 AV Input Connector
3 USB connector 7 DC Input
Universal connector for VGA/ Audio
4
in/ Audio out connector

4
Control Panel
English
4 6
2
# Icon Function Description

1 POWER Power button and Power Indicator LED.
See the contents in "Turning the Projector
On/Off" section.
2 MENU Press "MENU" to launch the Onscreen
display (OSD) menu, back to the previous
step for the OSD menu operation or exit
the OSD menu.
3 SOURCE Changes the active source.
4 LAMP Lamp Indicator LED
5 TEMP Temp Indicator LED
6 Four directional select Use the keys to select items or make

keys adjustments to your selection.

5
Remote Control Layout
English
1
2
4
3
6
5
7
8
9
10
11
12
13
15
16
14

1 Infrared Sends signals to the projector.
transmitter
2 FREEZE To pause the screen image.
3 POWER Refer to the "Turning the Projector On/Off" section.
4 HIDE Momentarily turns off the video. Press "HIDE" to hide the
image, press again to display the image.
5 ASPECT RATIO To pause the screen image.
6 RESYNC Automatically synchronizes the projector to the input source.
7 SOURCE Press "SOURCE" to choose from RGB, Component, S-Video,
Composite, Video and HDTV sources.
8 STOP Press "Stop" to stop playing media file.
9 Play/Pause Press "Play/Pause" to play/pause media file.
10 MENU Press "MENU" to launch the Onscreen display (OSD) menu,
back to the previous step for the OSD menu operation or exit
the OSD menu.
11 Four directional Use up, down, left, right buttons to select items or make
select keys adjustments to your selection.
12 MEDIA Press "MEDIA" to toggle between USB A, Micro SD and RAM
sources. This projector supports various file formats of photo/
audio/ video.
13 Empowering key Unique Acer functions: eView, eTimer, e3D and ePower
Management.
Press " " key under Micro SD/USB A/RAM source, the setting
page will be shown for user's adjustment.

6

English
14 LAN/WIFI Press "LAN/WIFI" to change source to LAN/WIFI.

15 HDMI/VGA Press "HDMITM/VGA" to change source to HDMITM/VGA.
16 AV Press "AV" to change source to AV.

7
Getting Started
English
Connecting the Projector
Adapter
3 1
W
R
micro USB
HDMI AV IN DC IN
UNIVERSAL I/O
10
iPod/iPhone/iPad
HDMI
8 7
D-Sub
HDMI
9
DVD player 6
1 AC to DC power adapter 6 3.5 mm jack A/V
2 Power cord 7 HDMI cable
USB disk/stick
3 8 Universal to D-sub and Audio out cable
USB WiFi adapter
4 Micro SD card 9 Universal to RCA cable
5 Adapter for iPod/iPhone/iPad 10 Audio cable Jack/RCA
Note: To ensure the projector works well with your computer,

please make sure the timing of the display mode is compatible
with the projector.

8
Turning the Projector On/Off

English
Turning on the Projector
1 Ensure that the power cord and signal cable are securely connected. The
Power indicator LED will flash red.
2 Turn on the projector by pressing "Power" button on the control panel,
and the Power indicator LED will turn blue.(Illustration #1)
3 Turn on your source (computer, notebook, video player ,etc.). The
projector will detect your source automatically.
• If the screen displays "No Signal", please make sure the signal cables
are securely connected.
• If you connect to multiple sources at the same time, use the "Source"
button on either control panel or the remote control or direct source
key on the remote control to switch between inputs.
1
Power button

9
Turning the projector off
English
1 To turn the projector off, press the power button. This message appears:
"Please press the power button again to complete the shutdown process."
Press the power button again.
2 The LED power indicator will turn RED and blink rapidly after the projector
is turned off, and the fan(s) will continue to operate for about 30 sec to
ensure that the system cools properly.
3 Once the system has finished cooling, the LED power indicator will stop
blinking and turn solid red to indicate standby mode.
4 It is now safe to unplug the power cord.
Warning indicators:
• "Projector Overheated. Will automatically turn off soon."

This onscreen message indicates that the projector has overheated.
The projector will automatically shut down. Contact your local dealer
or service center.
• "Fan failed. Will automatically turn off soon."
This onscreen message indicates that the fan has failed. The projector
will automatically shut down. Contact your local dealer or service
center.
Note: Whenever the projector automatically shuts down, contact

your local reseller or service center.

10
Adjusting the Projected Image

English
Adjusting the Height of Projected Image

The projector is equipped with tilt adjusting wheel for adjusting the height of
image.
To raise/lower the image:

1 Use Tilt adjusting wheel to fine-tune the display angle.
Tilt adjusting wheel

11
How to optimize image size and distance
English
Consult the table below to find the optimal image sizes achievable when the
projector is positioned at a desired distance from the screen. Example: If the
projector is 1.34 m from the screen, good image quality is possible for image
sizes 41.5".
Note: Remind as below figure, the space of 56 cm height is

required when located at 1.34 m distance.
scree
n size
41.5"
Height:
56cm
C
A
1.34m
Desired Distance

English 12
Screen size Top

Desired (Min zoom)
Distance (m) From base
<A> Diagonal (inch) to top of
W (cm) x H (cm)
<B> image (cm)
<C>
0.97 30.0 64 x 40 40
1.07 33.2 71 x 45 45
1.34 41.5 89 x 56 56
1.61 49.7 107 x 67 67
2.14 66.3 143 x 89 89
2.58 80.0 172 x 108 108
Zoom Ratio: 1.0x

13
User Controls
English
Installation menu
The installation menu provides an onscreen display (OSD) for projector
installation and maintenance. Use the OSD only when the message "No signal
input" is displayed on the screen.
The menu options include settings and adjustments for screen size and distance,
focus, keystone correction and more .
1 Turn on the projector by pressing "Power" button on the control pad.
2 Press the "MENU" button on the control pad to launch the OSD for
projector installation and maintenance.
3 The background pattern acts as a guide to adjusting the calibration and

alignment settings, such as screen size and distance, focus and more .
4 The Installation menu includes the following options:
•Projection method
•Menu location
•Auto Keystone settings
•Manual Keystone settings
•Language settings
•Reset to factory default function
Use the up and down arrow keys to select an option, the left and right
arrow keys to adjust selected option settings, and the right arrow key to
enter a submenu for feature setting. The new settings will be saved
automatically upon exiting the menu.
5 Push the menu button anytime to exit the menu and return to the Acer
welcome screen.

14
Acer Empowering Technology

English
Acer Empowering Key provide four Acer unique functions, they are "Acer
eView Management", "Acer eTimer Management", "Acer ePower
Management" and "Acer e3D Management respectively.
Press " " key to launch the Onscreen display main menu to modify its
function.
When the Empowering Menu is displayed, use the " " key to select the main
menu.
Acer eView Management "Acer eView Management" is for

display mode selection. Please refer to
Onscreen Display Menus section for
more detail.
Acer eTimer Management "Acer eTimer Management" provides

the reminding function for
presentation time control. Please refer
to Onscreen Display Menus section for
more detail.
Acer ePower Management "Acer ePower Management" provides

user one shortcut to save the projector
life. Please refer to Onscreen Display
section for more detail.
Acer e3D Management "Acer e3D Management" provides the

3D functions. Please refer to Onscreen
Display Menus section for more detail.

15
Onscreen Display (OSD) Menus
English
The projector has multilingual OSD that allow you to make image adjustments
and change a variety of settings.
Using the OSD menus

• To open the OSD menu, press "MENU" on the remote control.
• When the OSD is displayed, use the keys to select any item in the
main menu. After selecting the desired main menu item, press to enter
submenu for feature setting.
• Use the keys to select the desired item and adjust the settings by
using the keys.
• Select the next item to be adjusted in the submenu and adjust as described
above.
• Press "MENU" on the remote control, the screen will return to the main
menu.
• To exit OSD, press "MENU" on the remote control again. The OSD menu
will close and the projector will automatically save the new settings.
Main menu
Setting
Sub menu

16
Color
English
Display Mode There are many factory presets optimized for various types of
images.
• Bright: For brightness optimization.
• Presentation: For meeting presentation.
• Standard: For common environment.
• Video: For playing video in a bright environment.
• Picture: For graphic picture.
• Game: For game content.
• User: Memorize user’s settings.
Wall color Use this function to choose a proper color according to the wall.
There are several choices, including white, light yellow, light blue,
pink, dark green. It will compensate the color deviation due to the
wall color to show the correct image tone.
Brightness Adjust the brightness of the image.
• Press to darken image.
• Press to lighten the image.

Contrast "Contrast" controls the difference between the lightest and
darkest parts of the picture. Adjusting the contrast changes the
amount of black and white in the image.
• Press to decrease the contrast.
• Press to increase the contrast.

Saturation Adjusts a video image from black and white to fully saturated
color.
• Press to decrease the amount of color in the image.
• Press to increase the amount of color in the image.

Tint Adjusts the color balance of red and green.
• Press to increase the amount of green in the image.
• Press to increase the amount of red in the image.

17
Advanced Color Temperature
English
Adjust the color temperature. At higher color temperatures, the screen
looks colder; at lower color temperatures, the screen looks warmer.
Degamma
Effects the representation of dark scenery. With greater gamma
value, dark scenery will look brighter.
Dynamic Black
Choose "On" to automatically optimize the display of dark movie
scenes enabling them to be shown in incredible detail.
Note: "Saturation" and "Tint" functions are not supported under computer
mode or HDMI mode.
Image
Projection Front-Desktop
• The factory default setting.
Front-Ceiling
• When you select this function, the projector inverts the image
for ceiling-mounted projection.
Rear-Desktop
• When you select this function, the projector reverses the image
so you can project from behind a translucent screen.
Rear-Ceiling
• When you select this function, the projector reverses and inverts
the image at same time. You can project from behind a
translucent screen with ceiling mounted projection.
Aspect Ratio Use this function to choose your desired aspect ratio.
• Auto: Keep the image with original width-higth ratio and maxi
mize the image to fit native horizontal or vertical pixels.
• 4:3: The image will be scaled to fit the screen and displayed
using a 4:3 ratio.
• 16:9: The image will be scaled to fit the width of the screen and
the height adjusted to display the image using a 16:10 ratio.
• Full: Resize image to fit full screen by width (1280 pixels) and
height (800 pixels).
• L.Box: Keep original signal aspect ratio and zoom in by 1.333 times.

18
Auto Keystone Automatically adjusts vertical image.

English
Manual Keystone Adjust image distortion caused by tilting projection. (±40 degrees)
<Note> The Manual Keystone funcion is unavailable under Auto

Keystone setting to "On".
Sharpeness Adjusts the sharpness of the image.
• Press to decrease the sharpness.

• Press to increase the sharpness.
H. Position
(Horizontal
• Press to move the image left.
position) • Press to to move the image right.
V. Position
(Vertical position)
• Press to move the image down.
• Press to move the image up.
Frequency "Frequency" changes the projector's refresh rate to match the
frequency of your computer’s graphics card. If you can see a vertical
flickering bar in the projected image, use this function to make the
necessary adjustments.
Tracking Synchronizes the signal timing of the projector with the graphics card.
If you experience an unstable or flickering image, use this function to
correct it.
HDMI Color Range Adjust the color range of the HDMI image data to correct color display
error.
• Auto: Automatically adjust by information from player.
• Limited Range: Prosess the input image as limited color range
data.
• Full Range: Prosess the input image as full color range data.
HDMI Scan Info Adjust the overscan ratio of the HDMI image on screen.
• Auto: Automatically adjust by information from player.
• Underscan: Always no overscan on HDMI image.
• Overscan: Always keep overscan on HDMI image.
Note: "H. Position", "V. Position", "Frequency" and "Tracking" functions

are not supported under HDMI or Video mode.
Note: "Sharpness" functions is not supported under HDMI and Computer
mode.
Note: "HDMI Color Range" and "HDMI Scan Info" functions are only
supported under DVI mode.

19
Setting
English
Menu Location Choose the menu location on the display screen.
Closed Caption Selects a preferred closed captioning mode from CC1, CC2, CC3,
CC4, (CC1 displays captions in the primary language in your area).
Select "Off" to turn off the captioning feature. This function is only
available when a composite video or S-Video input signal is
selected and its system format is NTSC.
<Note> Set your screen aspect ratio to 4:3. This function is not
available when the aspect ratio is "16:9" or "Auto" .
Reset
Press the button and choose "Yes" to return the parameters
on all menus to the factory default settings.
Management
ECO Mode Choose "On" to dim the projector lamp which will lower power
consumption, extend the lamp life and reduce noise. Choose "Off"
to return normal mode.
High Altitude Choose "On" to turn on High Altitude mode. Operate the fans at
full speed continuously to allow for proper high altitude cooling of
the projector.
Auto Shutdown The projector will automatically shutdown when there is no signal
input after the allocated time. (in minutes)
LED Calibration
Press after choosing "Yes", please wait for 10 seconds to finish
the white color fine tune process. It helps to adjust LED color
performance.

20
Audio
English
Volume
• Press to decrease the volume.
• Press to increase the volume.
Mute • Choose "On" to mute the volume.
• Choose "Off" to restore the volume.
Alarm Volume • Select this function to adjust the volume of any warning
notifications.
3D
3D Choose "On" to enable DLP 3D function.

• On: Choose this item while using DLP 3D glasses, quad
buffer (NVIDIA/ATI...) graphic card and HQFS format file or
DVD with corresponding SW player.
• Off: Turn off 3D mode.
3D Sync Invert If you see a discrete or overlapping image while wearing DLP 3D
glasses, you may need to execute "Invert" to get best match of
left/right image sequence to get the correct image (for DLP 3D).

21
3D Warning Message Choose "On" to display the 3D warning message.
English
Note: It needs correct settings on graphic card 3D application program for
correct 3D display.
Note: The SW players, such as Stereoscopic Player and DDD TriDef Media
Player can support 3D format files. You can download these three players
on web page below,
- Stereoscopic Player (Trial): http://www.3dtv.at/Downloads/Index_en.aspx
- DDD TriDef Media Player (Trial):
http://www.tridef.com/download/TriDef-3-D-Experience-4.0.2.html
Note: "3D Sync Invert" is only available when 3D is enabled.
Note: There has reminder screen if 3D still enable when power on projector.
Please adjust setting depended on your purpose.
Language
Language Choose the multilingual OSD menu. Use the or key

to select your preferred menu language.
• Press to confirm the selection.

22
How to Play iPhone/iPod/iPad Media via

English
K130/L220/LK-W11
Adjust K130/L220/LK-W11 source upto "AV" and make sure to plug adapter
with iPod/iPhone/iPad well.
iPod/iPhone/iPad
AV IN DC IN
2
# Description
1 3.5 mm jack A/V cable
1
2 Adapter for iPod/iPhone/iPad
How to play photos

If using iPhone,
Follow below steps
1. Press application "Photos" on main screen and choose album.
2. Press X in thumbnail page.
Photos
If using iPod,
Note :
Please make sure Photo
setting in advance.
• If by iPod Nano:
Photos J Settings
• If by iPod Classic :
Slideshow Settings
a. TV Out: choose On
b. TV Signal: choose NTSC

23
Follow below steps
English
1. Choose photos and then choose which album you want. (ex. TOKYO)
2. If by iPod Nano : press Xwhen thumbnail mode.
3. If by iPod Classic : press to enter "slideshow" mode and photo will be

output automatically via K130/L220/LK-W11.
If using iPad,
Photos
Follow below steps:
1. Press application "Photos" on main screen.
2. Press "Slideshow" J "Start Slideshow"

24
How to play videos

English
If using iPhone,
Follow below steps
1. Press application "Videos" in main screen.
2. Press video clip you want in Video clip listing, then video will be output
automatically via K130/L220/LK-W11.
iPod
If using iPad,
Follow below steps:
1. Press application "Videos" on main screen
2. Press video clip you want in video clip listing and press X, then video will
be output automatically via K130/L220/LK-W11.
Videos

25
Appendices
English
Troubleshooting
If you experience a problem with your Acer projector, refer to the following
troubleshooting guide. If the problem persists, please contact your local reseller
or service center.
Image Problems and Solutions
# Problem Solution
1 No image appears • Connected as described in the "Getting Started"

onscreen section.
• Ensure none of the connector pins are bent or
broken.
• Make sure the projector is switched on.
2 Partial, scrolling • Press "RESYNC" on the remote control.

or incorrectly
displayed image • For an incorrectly displayed image:
(For PC (Windows • Open "My Computer," open the "Control
95/98/2000/XP/ Panel," and then double-click the "Display"
Vista/Win7)) icon.
• Select the "Settings" tab.
• Verify that your display resolution setting is
lower than or equal to 1080P-EIA.
• Click the "Advanced Properties" button.
If the problem still appears, change the monitor display
you are using and follow the steps below:
• Verify that the resolution setting is lower than
or equal to 1080P-EIA.
• Click the "Change" button under the
"Monitor" tab.
• Click "Show all devices". Next, select "Standard
monitor types" under the SP box, and choose
the resolution mode you need under the
"Models" box.
• Verify that the resolution setting of the
monitor display is lower than or equal to
1080P-EIA.

26
3 Partial, scrolling • Press "RESYNC" on the remote control.

English
or incorrectly
displayed image • For an incorrectly displayed image:
(for notebooks) • Follow the steps for item 2 (above) to adjust
the resolution of your computer.
• Press the toggle output settings. Example:
[Fn]+[F4], Compaq [Fn]+[F4], Dell [Fn]+[F8],
Gateway [Fn]+[F4], IBM [Fn]+[F7], HP [Fn]+[F4],
NEC [Fn]+[F3], Toshiba [Fn]+[F5 ]
• If you experience difficulty changing resolutions or
your monitor freezes, restart all equipment
including the projector.
4 The screen of the • If you are using a Microsoft® Windows® based

notebook notebook: Some notebook PCs may deactivate their
computer is not
displaying your own screens when a second display device is in use.
presentation Each has a different way to be reactivated. Refer to
your computer's manual for detailed information.
• If you are using an Apple® Mac® OS based
notebook: In System Preferences, open Display and
select Video Mirroring "On".
5 Image is unstable • Adjust the "Tracking" to correct it. Refer to the

or flickering "Image" section for more information.
• Change the display color depth settings on your
computer.
6 Image has vertical • Use "Frequency" to make an adjustment. Refer to

flickering bar the "Image" section for more information.
• Check and reconfigure the display mode of your
graphics card to make it compatible with the
projector.
7 Image is out of • Adjusts the focus ring on the projector lens.

focus
• Make sure the projection screen is within the
required distance of 3.18-8.46 feet (0.97-2.58 meters)
from the projector. Refer to the "How to Get a
Preferred Image Size by Adjusting Distance and
Zoom" section for more information.
8 Image is stretched When you play a DVD encoded in anamorphic or 16:9

when displaying a aspect ratio you may need to adjust the following
"widescreen" settings:
DVD title • If you play a 4:3 format DVD title, please change the
format to 4:3 in the projector OSD.
• If the image is still stretched, you will also need to
adjust the aspect ratio. Set up the display format to
16:9 (wide) aspect ratio on your DVD player.
• If you play an Letterbox(LBX) format DVD title,
please change the format to Letterbox(LBX) in the
projector OSD.

27
9 Image is too small • Adjust the zoom ring on the top of the projector.
English
or too large
• Move the projector closer to or further from the
screen.
• Press "MENU" on the remote control or on the
control panel. Go to "Image --> Aspect Ratio" and
try different settings.
10 Image has slanted • If possible, reposition the projector so that it is

sides centered on the screen.
• Press the "Keystone" on the OSD until the sides are
vertical.
11 Image is reversed • Select "Image --> Projection" on the OSD and adjust
the projection direction.
Problems with the Projector
# Condition Solution
1 The projector stops responding If possible, turn off the projector, then
to all controls unplug the power cord and wait at least 30
seconds before reconnecting power.

28
OSD Messages
English
# Condition Message Reminder
1 Message Fan Fail - the system fan is not working.
Projector Overheated - the projector has exceeded its

recommended operating temperature and must be allowed to
cool down before it may be used.

29
LED & Alarm Definition Listing
English
LED Messages
Meun Lamp Temp Power LED Power LED

(UP/Down (Left/Right
Message LED) LED)
BLUE BLUE BLUE RED BLUE
Input Power Plug --- Flash On to Flash On to Flash On to ---

OFF 100ms OFF 100ms OFF 100ms
Standy by --- --- --- ON ---
Power buttom on ON 1sec ON 1sec ON 1sec --- ON

then off then off then off
Lamp retry --- --- --- --- Quick

Flashing
Power off --- --- --- Quick ---

(cooling State) Flashing
Power button --- --- --- ON ---

OFF; Cooling
completed;
Standby Mode)
Error (Thermal --- --- ON --- ON

fail)
Error (Fan Lock) --- --- Quick --- ON

Flashing
Erro (Lamp Break --- ON --- --- ON

down)
Note: When power on, click any key, Menu/Up/Down/Left/Right

key LED will all be trigger.

30
Specifications
English
The specifications listed below are subject to change without notice. For final
specs, please refer to Acer's published marketing specifications.
Projection system DLP®

Resolution WXGA (1280 x 800)
Computer compatibility IBM PC and compatibles, Apple Macintosh, iMac and
VESA standards: SXGA, XGA, SVGA, VGA, WXGA
Video compatibility NTSC (3.58/4.43), PAL (B/D/G/H/I/M/N), SECAM (B/D/G/
K/K1/L), HDTV (720p, 1080i, 1080p), EDTV (480p,
576p), SDTV (480i, 576i)
Aspect ratio Full, 4:3, 16:9, L.Box
Displayable colors 16.7 million colors
Projection lens YM101, fixed lens, F/2.0
Projection screen size (diagonal) 30" (0.76 m) - 80" (2.03 m)
Projection distance 3.18' (0.97 m) - 8.46' (2.58 m)
Throw ratio 40"@1.292m(1.5:1)
Horizontal scan rate 30 k - 100 kHz
Vertical refresh scan rate 50 - 120 Hz
Keystone correction +/- 40 degrees
Weight 0.43 Kg (0.95 Ibs)
Dimensions (W x D x H) 140 mm x 116 mm x 41 mm (5.51" x 4.57" x 1.61")
Power supply AC 100 – 240 V, 50-60 Hz
Power consumption Normal mode: 51.5 W +/- 20% @ 110Vac (Bright
mode @ full power)
ECO mode: 42 W +/-20% @ 110Vac (Video mode @ eco
power)
Standby < 0.5 W
Operating temperature 5ºC to 35ºC / 41ºF to 95ºF
I/O connectors • DC input x1
• Micro SD x1
• USB x1: for multimedia
• HDMI x1
• Universal input x1
• Audio/Video input x1

31
Standard package contents • Power cord x1
English
• AC to DC power adapter x1
• 3.5 mm jack A/V cable x1
• Universal to D-sub and Audio out cable x1
• Remote control x1
• Battery x 1 (for remote control)
• User's Guide (CD-ROM) x1 (for projector
function)
• User's Guide (CD-ROM) x1 (for multi-media
function)
• Quick start guide x1
* Design and specifications are subject to change without notice.

32
Compatibility modes
English
A. VGA Analog
1 VGA Analog - PC Signal
Modes Resolution V.Frequency [Hz] H.Frequency [KHz]
VGA 640x480 60 31.5
640x480 72 37.9
640x480 75 37.5
640x480 85 43.3
640x480 120 61.9
SVGA 800x600 56 35.1
800x600 60 37.9
800x600 72 48.1
800x600 75 46.9
800x600 85 53.7
800x600 120 77.4
XGA 1024x768 60 48.4
1024x768 70 56.5
1024x768 75 60.0
1024x768 85 68.7
1024x768 120 99.0
SXGA 1152x864 70 63.8
1152x864 75 67.5
1152x864 85 77.1
1280x1024 60 64.0
1280x1024 72 77.0
1280x1024 75 80.0
QuadVGA 1280x960 60 60.0
1280x960 75 75.2
SXGA+ 1400x1050 60 65.3
PowerBook G4 640x480 60 31.4
PowerBook G4 640x480 66.6 (67) 34.9
PowerBook G4 800x600 60 37.9
PowerBook G4 1024x768 60 48.4
PowerBook G4 1152x870 75 68.7
PowerBook G4 1280x960 75 75.0
i Mac DV (G3) 1024x768 75 60.0

33
2 VGA Analog - Extended Wide timing
English
WXGA 1280x768 60 47.8
1280x768 75 60.3
1280x768 85 68.6
1280x720 60 44.8
1280x800 60 49.6
1440x900 60 59.9
WSXGA+ 1680x1050 60 65.3
1920x1080
(Reduced
Blanking Timing) 60 66.6
1366x768 60 47.7
3 VGA Analog - Component Signal

480i 720x480 59.94(29.97) 15.7
576i 720x576 50(25) 15.6
480p 720x480 59.94 31.5
576p 720x576 50 31.3
720p 1280x720 60 45.0
720p 1280x720 50 37.5
1080i 1920x1080 60 (30) 33.8
1080i 1920x1080 50 (25) 28.1
1080p 1920x1080 60 67.5
1080p 1920x1080 50 56.3
B. HDMI Digital
1 HDMI - PC Signal

VGA 640x480 60 31.5
640x480 72 37.9
640x480 75 37.5
640x480 85 43.3
640x480 120 61.9
SVGA 800x600 56 35.1
800x600 60 37.9
800x600 72 48.1
800x600 75 46.9
800x600 85 53.7
800x600 120 77.4

34
XGA 1024x768 60 48.4

English
1024x768 70 56.5
1024x768 75 60.0
1024x768 85 68.7
1024x768 120 99.0
SXGA 1152x864 70 63.8
1152x864 75 67.5
1152x864 85 77.1
1280x1024 60 64.0
1280x1024 72 77.0
1280x1024 75 80.0
QuadVGA 1280x960 60 60.0
1280x960 75 75.2
SXGA+ 1400x1050 60 65.3
PowerBook G4 640x480 60 31.4
PowerBook G4 640x480 66.6 (67) 34.9
PowerBook G4 800x600 60 37.9
PowerBook G4 1024x768 60 48.4
PowerBook G4 1152x870 75 68.7
PowerBook G4 1280x960 75 75.0
i Mac DV (G3) 1024x768 75 60.0
2 HDMI - Extended Wide timing
WXGA 1280x768 60 47.8
1280x768 75 60.3
1280x768 85 68.6
1280x720 60 44.8
1280x800 60 49.6
1440x900 60 59.9
WSXGA+ 1680x1050 60 65.3
1920x1080
(Reduced Blanking 60 66.6
Timing)
1366x768 60 47.7

35
3 HDMI - Video Signal
English
480i 720x480(1440x480) 59.94 (29.97) 15.7
576i 720x576(1440x576) 50 (25) 15.6
480p 720x480 59.94 31.5
576p 720x576 50 31.3
720p 1280x720 60 45.0
720p 1280x720 50 37.5
1080i 1920x1080 60 (30) 33.8
1080i 1920x1080 50 (25) 28.1
1080p 1920x1080 60 67.5
1080p 1920x1080 50 56.3
Graphic source Horizontal scan rate: 30k~100kHz
monitor range
limits Vertical scan rate: 50~120Hz
Max. pixel rate 150MHz

36
Regulations and safety notices

English
FCC notice
This device has been tested and found to comply with the limits for a Class B
digital device pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This device generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this device does cause harmful interference to radio or television
reception, which can be determined by turning the device off and on, the user
is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the device and receiver.
• Connect the device into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/television technician for help.
Notice: Shielded cables

All connections to other computing devices must be made using shielded cables
to maintain compliance with FCC regulations.
Notice: Peripheral devices

Only peripherals (input/output devices, terminals, printers, etc.) certified to
comply with the Class B limits may be attached to this equipment. Operation
with non-certified peripherals is likely to result in interference to radio and TV
reception.
Caution
Changes or modifications not expressly approved by the manufacturer could
void the user's authority, which is granted by the Federal Communications
Commission, to operate this device.
Operation conditions
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Notice: Canadian users

This Class B digital apparatus complies with Canadian ICES-003.

37
Remarque à l'intention des utilisateurs canadiens
English
English
Cet appareil numérique de la classe B est conforme a la norme NMB-003 du
Canada.
Declaration of Conformity for EU countries

Acer hereby declares that this projector series is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC.
Compliant with Russian regulatory certification
Radio device regulatory notice
Note: The regulatory information below is for models with

wireless LAN and/or Bluetooth only.
General
This product complies with the radio frequency and safety standards of any
country or region in which it has been approved for wireless use. Depending on
configurations, this product may or may not contain wireless radio devices (such
as wireless LAN and/or Bluetooth modules).
Canada — Low-power license-exempt radio

communication devices (RSS-210)
a Common information
Operation is subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference
that may cause undesired operation of the device.
b Operation in 2.4 GHz band
To prevent radio interference to the licensed service, this device is
intended to be operated indoors and installation outdoors is subject
to licensing.
List of applicable countries

This device must be used in strict accordance with the regulations and constraints in the
country of use. For further information, please contact the local office in the country of use.
Please see http://ec.europa.eu/enterprise/rtte/implem.htm for the latest country list.

Acer Incorporated
8F, 88, Sec. 1, Xintai 5th Rd., Xizhi,
New Taipei City 221,Taiwan, R.O.C.
Declaration of Conformity
We,
Acer Incorporated
8F, 88, Sec. 1, Xintai 5th Rd., Xizhi, New Taipei City 221,Taiwan, R.O.C.
Contact Person: Mr. Easy Lai, e-mail:easy_lai@acer.com.tw
And,
Acer Italy s.r.l
Via Lepetit, 40, 20020 Lainate (MI) Italy
Tel: +39-02-939-921, Fax: +39-02 9399-2913, www.acer.it
Hereby declare that:
Product: Projector
Trade Name: Acer
Model Number: CWX1013
Machine Type: K130/L220/LK-W11
Is compliant with the essential requirements and other relevant provisions of the following EC
directives, and that all the necessary steps have been taken and are in force to assure that
production units of the same product will continue comply with the requirements.
EMC Directive 2004/108/EC as attested by conformity with the following

harmonized standards:
-. EN55022, AS/NZS CISPR22, Class B
-. EN55024
-. EN61000-3-2 Class A
-. EN61000-3-3
Low Voltage Directive 2006/95/EC as attested by conformity with the following

harmonized standard:
-. EN60950-1
RoHS Directive 2002/95/EC on the Restriction of the Use of certain Hazardous

Substances in Electrical and Electronic Equipment
-. The maximum concentration values of the restricted substances by weight in homogenous
material are:
Lead 0.1% Polybrominated Biphenyls (PBB’s) 0.1%

Mercury 0.1% Polybrominated Diphenyl Ethers (PBDE’s) 0.1%
Hexavalent Chromium 0.1% Cadmium 0.01%
!
Directive 2009/125/EC with regard to establishing a framework for the setting
of ecodesign requirements for energy-related product.

Acer Incorporated
8F, 88, Sec. 1, Xintai 5th Rd., Xizhi,
New Taipei City 221,Taiwan, R.O.C.
The standards listed below are applied to the product if built with WLAN
module or wireless keyboard and mouse.
R&TTE Directive 1999/5/EC as attested by conformity with the following

harmonized standard:
z Article 3.1(a) Health and Safety

-. EN60950-1
-. EN62311
z Article 3.1(b) EMC

-. EN301 489-1
-. EN301 489-17
z Article 3.2 Spectrum Usages

-. EN300 328
-. EN301 893 (Applicable to 5GHz high performance RLAN).
Year to begin affixing CE marking 2011.
_______________________________ Dec. 10, 2011 -

Easy Lai /Manager Date
Regulation Center, Acer Inc.

Acer America Corporation
333 West San Carlos St., San Jose
CA 95110, U. S. A.
Tel : 254-298-4000
Fax : 254-298-4147
www.acer.com
Federal Communications Commission

Declaration of Conformity
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
The following local Manufacturer / Importer is responsible for this declaration:
Product: DLP Projector
Model Number: CWX1013
Machine Type: K130/L220/LK-W11
Name of Responsible Party: Acer America Corporation
Address of Responsible Party: 333 West San Carlos St.

San Jose, CA 95110
U. S. A.
Contact Person: Acer Representative
Phone No.: 254-298-4000
Fax No.: 254-298-4147

ACER k130

Uploaded by

Copyright:

Available Formats

ACER k130

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

ACER k130

Uploaded by

Copyright:

Available Formats

Acer Projector

Downloaded from www.Manualslib.com manuals search engine

Acer Projector K130/L220/LK-W11 Series User's Guide

No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in

Acer Projector K130/L220/LK-W11 Series

Model number: __________________________________

Serial number: ___________________________________

Date of purchase: ________________________________

Place of purchase: ________________________________

Downloaded from www.Manualslib.com manuals search engine

Information for your safety and

Turning the product off before cleaning

Caution for plug as disconnecting device

Caution for Accessibility

• Do not use this product near water.

Downloaded from www.Manualslib.com manuals search engine

• To avoid damage of internal components and to prevent battery leakage,

Using electrical power

Downloaded from www.Manualslib.com manuals search engine

Additional safety information

Downloaded from www.Manualslib.com manuals search engine

Caution for Listening

Downloaded from www.Manualslib.com manuals search engine

Downloaded from www.Manualslib.com manuals search engine

First things first

Downloaded from www.Manualslib.com manuals search engine

Downloaded from www.Manualslib.com manuals search engine

Regulations and safety notices 36

Downloaded from www.Manualslib.com manuals search engine

• 1280 x 800 WXGA resolution

• Versatile display modes (Bright, Presentation, Standard,Video, Picture,

• NTSC/PAL/SECAM compatible and HDTV (480i/p, 576i/p, 720p, 1080i/p)

• Compact size projector facilitates business purposes and home

• Acer EcoProjeciton Technology delivers Intelligent power management

• Empowering Key reveals Acer Empowering Technology utilities (Acer

• Equipped with HDMITM connection supporting HDCP

• Advanced digital keystone correction delivers optimum presentations

• Multi-language on screen display (OSD) menus

• 1.67x digital zoom and pan move function

• Environmental light source and longer life by LED solution.

• Microsoft® Windows® 2000, XP, Vista® Windows® 7, Macintosh® OS

Downloaded from www.Manualslib.com manuals search engine

Projector Power cord AC to DC power adapter

3.5 mm jack A/V cable Universal to D-sub and Remote control

Battery User's Guide x2 Quick start guide

Adapter for iPod/iPhone/ Carrying case

Downloaded from www.Manualslib.com manuals search engine

Downloaded from www.Manualslib.com manuals search engine

# Icon Function Description

4 LAMP Lamp Indicator LED

5 TEMP Temp Indicator LED

6 Four directional select Use the keys to select items or make

Downloaded from www.Manualslib.com manuals search engine

Remote Control Layout

# Icon Function Description

Downloaded from www.Manualslib.com manuals search engine

# Icon Function Description

14 LAN/WIFI Press "LAN/WIFI" to change source to LAN/WIFI.

Downloaded from www.Manualslib.com manuals search engine

3. If by iPod Classic : press to enter "slideshow" mode and photo will be