SDSUS / EN / TUS01

Version: 3.2
Revision date: 11/11/2014
Initiator: 0001 / PRD
150000000148

SAFETY DATA SHEET

SECTION 1: Identification of the substance/mixture and of the company/undertaking
Product identifier
Product name: Eastman Texanol(TM) Ester Alcohol

Product No.: EAN 000701. 02104-00, P0210401, P0210404, P0210406, P021040A, P0210410, P0210412,
P0210415, P0210416, P02104E1, P02104E2, P0210402, P0210413, E02104D1, P0210417, P0210418,
P0210414, P0210419, P0210420, P0210421

Additional identification
Chemical name: 2,2,4-trimethyl-1,3-pentanediol mono(2-methylpropanoate)
CAS-No.: 25265-77-4

Relevant identified uses of the substance or mixture and uses advised against
Identified uses: Coalescing agent for emulsions
Uses advised against: None known.

Details of the supplier of the safety data sheet

Manufacturer / Supplier
Eastman Chemical Company
200 South Wilcox Drive
Kingsport, TN 37660-5280 US
+14232292000

Visit our website at www.EASTMAN.com or email emnmsds@eastman.com

Emergency telephone number:

For emergency health, safety, and environmental information, call 1-423-229-4511 or 1-423-229-2000.

For emergency transportation information, in the United States: call CHEMTREC at 800-424-9300 or call
423-229-2000.

SECTION 2: Hazards identification

Hazard classification: The product has not been classified as hazardous according to the legislation in force.

OSHA Specified Hazards: not applicable

Hazard(s) not otherwise None known.

classified (HNOC):

SECTION 3: Composition/information on ingredients

Substances / Mixtures

General information:

Chemical name Concentration Additional identification Notes

2,2,4-trimethyl-1,3-pentanediol 100% CAS-No.: 25265-77-4
monoisobutyrate

©COPYRIGHT 2014 BY EASTMAN CHEMICAL COMPANY 1/10

 SDSUS / EN / TUS01
Version: 3.2
Revision date: 11/11/2014
Initiator: 0001 / PRD
150000000148

* All concentrations are percent by weight unless ingredient is a gas. Gas concentrations are in percent by volume.
This substance has workplace exposure limit(s).

SECTION 4: First aid measures

Description of first aid measures
Inhalation: Move to fresh air. Treat symptomatically. Get medical attention if symptoms
persist.

Eye contact: Any material that contacts the eye should be washed out immediately with
water. If easy to do, remove contact lenses. Get medical attention if
symptoms persist.

Skin contact: Wash with soap and water. Get medical attention if symptoms occur.

Ingestion: Seek medical advice.

Most important symptoms and None known.

effects, both acute and
delayed:

Indication of any immediate medical attention and special treatment needed

Hazards: None known.

Treatment: Treat symptomatically.

SECTION 5: Firefighting measures

General fire hazards: None known.

Extinguishing media
Suitable extinguishing Water spray. Dry chemical. Carbon Dioxide. Foam.
media:

Unsuitable extinguishing None known.

media:

Special hazards arising from None known.

the substance or mixture:

Advice for firefighters

Special fire fighting None known.
procedures:

Special protective Self-contained breathing apparatus and full protective clothing must be
equipment for fire-fighters: worn in case of fire.

SECTION 6: Accidental release measures

Personal precautions, Wear appropriate personal protective equipment.
protective equipment and
emergency procedures:

Environmental precautions: Avoid release to the environment.

©COPYRIGHT 2014 BY EASTMAN CHEMICAL COMPANY 2/10

 SDSUS / EN / TUS01
Version: 3.2
Revision date: 11/11/2014
Initiator: 0001 / PRD
150000000148

Methods and material for Absorb spill with vermiculite or other inert material, then place in a container
containment and cleaning for chemical waste.
up:

Notification Procedures: In the event of a spill or accidental release, notify relevant authorities in
accordance with all applicable regulations.

SECTION 7: Handling and storage:

Precautions for safe handling: No special precautions are necessary beyond normal good hygiene
practices. See Section 8 of the MSDS for additional personal protection
advice when handling this product.

Conditions for safe storage, Keep container closed.

including any
incompatibilities:

Specific end use(s): Coalescing agent for emulsions Coatings Chemical Intermediate Plasticizer

SECTION 8: Exposure controls/personal protection

Control parameters
Occupational exposure limits

Country specific exposure limits have not been established or are not applicable
unless listed below.

Exposure controls
Appropriate engineering Good general ventilation (typically 10 air changes per hour) should be used.
controls: Ventilation rates should be matched to conditions. If applicable, use
process enclosures, local exhaust ventilation, or other engineering controls
to maintain airborne levels below recommended exposure limits. If
exposure limits have not been established, maintain airborne levels to an
acceptable level.

Individual protection measures, such as personal protective equipment

General information: Eye bath. Washing facilities.

Eye/face protection: It is a good industrial hygiene practice to minimize eye contact.

Skin protection
Hand protection: It is a good industrial hygiene practice to minimize skin contact.

Other: No data available.

©COPYRIGHT 2014 BY EASTMAN CHEMICAL COMPANY 3/10

 SDSUS / EN / TUS01
Version: 3.2
Revision date: 11/11/2014
Initiator: 0001 / PRD
150000000148

Respiratory Protection: If engineering controls do not maintain airborne concentrations below

recommended exposure limits (where applicable) or to an acceptable level
(in countries where exposure limits have not been established), an
approved respirator must be worn. In the United States of America, if
respirators are used, a program should be instituted to assure compliance
with OSHA Standard 63 FR 1152, January 8, 1998. Respirator type: Air-
purifying respirator with an appropriate, government approved (where
applicable), air-purifying filter, cartridge or canister. Contact health and
safety professional or manufacturer for specific information.

Hygiene measures: Observe good industrial hygiene practices.

Environmental Controls: No data available.

SECTION 9: Physical and chemical properties

Information on basic physical and chemical properties
Appearance
Physical State: Liquid
Form: Liquid
Color: Colorless
Odor: Slight
Odor Threshold: No data available.
pH: No data available.
Freezing Point: < -70.25 °C
Boiling Point: 255 - 261.5 °C (102.4 kPa)
Flash Point: 122 °C (Setaflash Closed Cup)
Evaporation Rate: No data available.
Flammability (solid, gas): Not applicable
Flammability Limit - Upper (%)–: No data available.
Flammability Limit - Lower (%)–: No data available.
Vapor pressure: 1.3 Pa (20 °C)
Vapor density (air=1): 7.5
Specific Gravity: 0.9464 (20 °C)
Solubility(ies)
Solubility in Water: 0.5 - 3.79 g/l (25 °C)
Solubility (other): No data available.
Partition coefficient (n-octanol/water): log Pow: 2.34 - 3.2
Autoignition Temperature: 388 °C (ASTM E659)
Decomposition Temperature: No data available.
Dynamic Viscosity: 12.9 mPa.s (25 °C)
Kinematic viscosity: 13.6 mm2/s (25 °C)
Explosive properties: Not classified
Oxidizing properties: Not classified

©COPYRIGHT 2014 BY EASTMAN CHEMICAL COMPANY 4/10

 SDSUS / EN / TUS01
Version: 3.2
Revision date: 11/11/2014
Initiator: 0001 / PRD
150000000148

SECTION 10: Stability and reactivity

Reactivity: None known.

Chemical stability: Stable

Possibility of hazardous None known.

reactions:

Conditions to avoid: None at ambient temperatures.

Incompatible materials: Strong oxidizing agents.

Hazardous decomposition Carbon Dioxide. Carbon Monoxide.

products:

SECTION 11: Toxicological information

Information on likely routes of exposure
Inhalation: None known.

Ingestion: None known.

Skin contact: None known.

Eye contact: None known.

Information on toxicological effects

Acute Toxicity
Oral
Product: No data available.
Specified substance(s)
2,2,4-trimethyl-1,3- Oral LD-50: (Rat): > 3,200 mg/kg
pentanediol
monoisobutyrate

Dermal
Product: No data available.
Specified substance(s)
2,2,4-trimethyl-1,3- Dermal LD-50: (Rabbit): > 15,200 mg/kg
pentanediol
monoisobutyrate Dermal LD-50: (Guinea Pig): > 19,000 mg/kg

Inhalation
Product: No data available.
Specified substance(s)
2,2,4-trimethyl-1,3- LCLo (Rat, 6 h): > 2.73 mg/l (highest concentration tested)
pentanediol LCLo (Rat, 6 h): > 3.55 mg/l
monoisobutyrate

Repeated dose toxicity

Product: No data available.

©COPYRIGHT 2014 BY EASTMAN CHEMICAL COMPANY 5/10

 SDSUS / EN / TUS01
Version: 3.2
Revision date: 11/11/2014
Initiator: 0001 / PRD
150000000148

Specified substance(s)
2,2,4-trimethyl-1,3- NOAEL (Rat, by gavage, 15 d): 1,000 mg/kg
pentanediol
monoisobutyrate

Skin corrosion/irritation:
Product: No data available.
Specified substance(s)
2,2,4-trimethyl-1,3- (Rabbit, 24 h): Slight
pentanediol
monoisobutyrate

Serious eye damage/eye

irritation:
Product: No data available.
Specified substance(s)
2,2,4-trimethyl-1,3- No data available.
pentanediol
monoisobutyrate

Respiratory or skin
sensitization:
Product: No data available.
Specified substance(s)
2,2,4-trimethyl-1,3- Skin Sensitization:, (Guinea Pig) - non-sensitizing
pentanediol
monoisobutyrate

Mutagenicity
In vitro
Product: No data available.
Specified substance(s)
2,2,4-trimethyl-1,3- Mutagenicity - Bacterial, : negative +/- activation
pentanediol Chromosomal aberration, : negative +/- activation
monoisobutyrate Mutagenicity - Mammalian, : negative +/- activation

In vivo
Product: No data available.
Specified substance(s)
2,2,4-trimethyl-1,3- No data available.
pentanediol
monoisobutyrate

Carcinogenicity
Product: No data available.
Specified substance(s)
2,2,4-trimethyl-1,3- No data available.
pentanediol
monoisobutyrate

Reproductive toxicity
Product: No data available.

©COPYRIGHT 2014 BY EASTMAN CHEMICAL COMPANY 6/10

 SDSUS / EN / TUS01
Version: 3.2
Revision date: 11/11/2014
Initiator: 0001 / PRD
150000000148

Specified substance(s)
2,2,4-trimethyl-1,3- No data available.
pentanediol
monoisobutyrate

Specific target organ toxicity - single exposure

Product: No data available.
Specified substance(s)
2,2,4-trimethyl-1,3- No data available.
pentanediol
monoisobutyrate

Specific target organ toxicity - repeated exposure

Product: No data available.
Specified substance(s)
2,2,4-trimethyl-1,3- No data available.
pentanediol
monoisobutyrate

Aspiration hazard
Product: No data available.
Specified substance(s)
2,2,4-trimethyl-1,3- No data available.
pentanediol
monoisobutyrate

Other adverse effects: No data available.

SECTION 12: Ecological information

Toxicity
Acute toxicity
Fish
Product: No data available.
Specified substance(s)
2,2,4-trimethyl-1,3- LC-50 (Fathead Minnow, 96 h): 33 mg/l
pentanediol
monoisobutyrate

Aquatic invertebrates
Product: No data available.
Specified substance(s)
2,2,4-trimethyl-1,3- EC-50 (Water Flea, 48 h): 147.8 mg/l
pentanediol
monoisobutyrate

Chronic Toxicity
Fish
Product: No data available.
Specified substance(s)
2,2,4-trimethyl-1,3- No data available.
©COPYRIGHT 2014 BY EASTMAN CHEMICAL COMPANY 7/10
 SDSUS / EN / TUS01
Version: 3.2
Revision date: 11/11/2014
Initiator: 0001 / PRD
150000000148

pentanediol
monoisobutyrate

Aquatic invertebrates
Product: No data available.
Specified substance(s)
2,2,4-trimethyl-1,3- No data available.
pentanediol
monoisobutyrate

Toxicity to Aquatic Plants

Product: No data available.
Specified substance(s)
2,2,4-trimethyl-1,3- ErC50 (Algae (Pseudokirchneriella subcapitata), 72 h): > 57 mg/l
pentanediol ErC50 (Algae (Pseudokirchneriella subcapitata), 72 h): 15 mg/l
monoisobutyrate

Persistence and degradability

Biodegradation
Product: No data available.
Specified substance(s)
2,2,4-trimethyl-1,3- > 77 % (28 d, Ready Biodegradability: CO2 Evolution Test) Readily biodegradable
pentanediol
monoisobutyrate

Biological Oxygen Demand:

Product No data available.
Specified substance(s)
2,2,4-trimethyl-1,3- No data available.
pentanediol
monoisobutyrate

Chemical Oxygen Demand:

Product No data available.
Specified substance(s)
2,2,4-trimethyl-1,3- No data available.
pentanediol
monoisobutyrate

BOD/COD ratio
Product No data available.
Specified substance(s)
2,2,4-trimethyl-1,3- No data available.
pentanediol
monoisobutyrate

Bioaccumulative potential
Product: No data available.
Specified substance(s)
2,2,4-trimethyl-1,3- No data available.
pentanediol
monoisobutyrate

©COPYRIGHT 2014 BY EASTMAN CHEMICAL COMPANY 8/10

 SDSUS / EN / TUS01
Version: 3.2
Revision date: 11/11/2014
Initiator: 0001 / PRD
150000000148

Mobility in soil: Log Koc - log Koc: 1.5 - 2.8

Results of PBT and vPvB No data available.

assessment:

2,2,4-trimethyl-1,3-pentanediol Not fulfilling PBT

monoisobutyrate (persistent/bioaccumulative/toxic) criteria

Other adverse effects: No data available.

SECTION 13: Disposal considerations

Waste treatment methods

General information: No data available.

Disposal methods: Dispose of waste and residues in accordance with local authority
requirements. Incinerate.

SECTION 14: Transport information

Important Note: Shipping descriptions may vary based on mode of transport, quantities, package size,
and/or origin and destination. Consult your company's Hazardous Materials/Dangerous Goods expert for
information specific to your situation.

DOT
Class not regulated

IMDG - International Maritime Dangerous Goods Code

Class not regulated

IATA
Class not regulated

SECTION 15: Regulatory information

Safety, health and environmental regulations/legislation specific for the substance or mixture:

This product has been classified in accordance with hazard criteria of the Controlled Products
Regulations and the MSDS contains all the information required by the Controlled Products
Regulations.
WHMIS (Canada) Status: noncontrolled
US EPCRA (SARA Title III) Section 313 - Toxic Chemical List
NONE

OSHA: nonhazardous

©COPYRIGHT 2014 BY EASTMAN CHEMICAL COMPANY 9/10

 SDSUS / EN / TUS01
Version: 3.2
Revision date: 11/11/2014
Initiator: 0001 / PRD
150000000148

TSCA (US Toxic Substances Control Act): This product is listed on the TSCA inventory. Any impurities
present in this product are exempt from listing.

DSL (Canadian Domestic Substances List) and CEPA (Canadian Environmental Protection Act): This
product is listed on the DSL. Any impurities present in this product are exempt from listing.

AICS / NICNAS (Australian Inventory of Chemical Substances and National Industrial Chemicals
Notification and Assessment Scheme): This product is listed on AICS or otherwise complies with NICNAS.

MITI (Japanese Handbook of Existing and New Chemical Substances): This product is listed in the
Handbook or has been approved in Japan by new substance notification.

ECL (Korean Toxic Substances Control Act): This product is listed on the Korean inventory or otherwise
complies with the Korean Toxic Substances Control Act.KE-24891

Philippines Inventory (PICCS) : This product is listed on the Philippine Inventory or otherwise complies with
PICCS.

Inventory of Existing Chemical Substances in China: All components of this product are listed on the
Inventory of Existing Chemical Substances in China (IECSC).

SECTION 16: Other information

HMIS® Hazard Ratings: Health - 1, Flammability - 1, Chemical Reactivity - 0

HMIS® rating involves data interpretations that may vary from company to company. They are intended only for rapid, general
identification of the magnitude of the specific hazard. To deal adequately with the safe handling of this material, all the i nformation
contained in this MSDS must be considered.

Revision Information: Not relevant.

Key literature references and No data available.

sources for data:
Training information: No data available.

Regulation (EC) No. 1272/2008

Issue date: 11/11/2014

SDS No.:
Disclaimer: This information is provided without warranty. The information is believed to
be correct. This information should be used to make an independent
determination of the methods to safeguard workers and the environment.

©COPYRIGHT 2014 BY EASTMAN CHEMICAL COMPANY 10/10