Order this document by MC1413/D

 
  

   

  

The seven NPN Darlington connected transistors in these arrays are well PERIPHERAL
suited for driving lamps, relays, or printer hammers in a variety of industrial
and consumer applications. Their high breakdown voltage and internal DRIVER ARRAYS
suppression diodes insure freedom from problems associated with inductive
loads. Peak inrush currents to 500 mA permit them to drive incandescent SEMICONDUCTOR
lamps. TECHNICAL DATA
The MC1413, B with a 2.7 kΩ series input resistor is well suited for
systems utilizing a 5.0 V TTL or CMOS Logic. The MC1416, B uses a series
10.5 kΩ resistor and is useful in 8.0 to 18 V MOS systems.

16
1

P SUFFIX
PLASTIC PACKAGE
ORDERING INFORMATION CASE 648
Operating
Plastic DIP SOIC Temperature Range

MC1413P (ULN2003A) MC1413D

TA = –20° to +85°C 16
MC1416P (ULN2004A) MC1416D
1
MC1413BP MC1413BD D SUFFIX
TA = –40° to +85°C
MC1416BP MC1416BD PLASTIC PACKAGE
CASE 751B
(SO–16)

PIN CONNECTIONS

Representative Schematic Diagrams

1 16
1/7 MC1413, B

2.7 k Pin 9 2 15

5.0 k 3 14
3.0 k

4 13

5 12

1/7 MC1416, B 6 11

10.5 k Pin 9
7 10
5.0 k
3.0 k 8 9

(Top View)

 Motorola, Inc. 1996 Rev 0

MOTOROLA ANALOG IC DEVICE DATA 1
 MC1413, B MC1416, B
MAXIMUM RATINGS (TA = 25°C, and rating apply to any one device in the
package, unless otherwise noted.)
Rating Symbol Value Unit
Output Voltage VO 50 V
Input Voltage VI 30 V
Collector Current – Continuous IC 500 mA
Base Current – Continuous IB 25 mA
Operating Ambient Temperature Range TA °C
MC1413–16 –20 to +85
MC1413B–16B –40 to +85
Storage Temperature Range Tstg –55 to +150 °C
Junction Temperature TJ 150 °C
Thermal Resistance, Junction–to–Ambient θJA °C/W
Case 648, P Suffix 67
Case 751B, D Suffix 100
NOTE: ESD data available upon request.

ELECTRICAL CHARACTERISTICS (TA = 25°C, unless otherwise noted)

Characteristic Symbol Min Typ Max Unit
Output Leakage Current ICEX µA
(VO = 50 V, TA = +85°C) All Types – – 100
(VO = 50 V, TA = +25°C) All Types – – 50
(VO = 50 V, TA = +85°C, VI = 1.0 V) MC1416, B – – 500
Collector–Emitter Saturation Voltage VCE(sat) V
(IC = 350 mA, IB = 500 µA) All Types – 1.1 1.6
(IC = 200 mA, IB = 350 µA) All Types – 0.95 1.3
(IC = 100 mA, IB = 250 µA) All Types – 0.85 1.1
Input Current – On Condition II(on) mA
(VI = 3.85 V) MC1413, B – 0.93 1.35
(VI = 5.0 V) MC1416, B – 0.35 0.5
(VI = 12 V) MC1416, B – 1.0 1.45
Input Voltage – On Condition VI(on) V
(VCE = 2.0 V, IC = 200 mA) MC1413, B – – 2.4
(VCE = 2.0 V, IC = 250 mA) MC1413, B – – 2.7
(VCE = 2.0 V, IC = 300 mA) MC1413, B – – 3.0
(VCE = 2.0 V, IC = 125 mA) MC1416, B – – 5.0
(VCE = 2.0 V, IC = 200 mA) MC1416, B – – 6.0
(VCE = 2.0 V, IC = 275 mA) MC1416, B – – 7.0
(VCE = 2.0 V, IC = 350 mA) MC1416, B – – 8.0
Input Current – Off Condition All Types II(off) 50 100 – µA
(IC = 500 µA, TA = 85°C)

DC Current Gain hFE 1000 – – –

(VCE = 2.0 V, IC = 350 mA)

Input Capacitance CI – 15 30 pF
Turn–On Delay Time ton – 0.25 1.0 µs
(50% EI to 50% EO)

Turn–Off Delay Time toff – 0.25 1.0 µs

(50% EI to 50% EO)

Clamp Diode Leakage Current TA = +25°C IR – – 50 µA

(VR = 50 V) TA = +85°C – – 100

Clamp Diode Forward Voltage VF – 1.5 2.0 V

(IF = 350 mA)

2 MOTOROLA ANALOG IC DEVICE DATA

 MC1413, B MC1416, B

TYPICAL PERFORMANCE CURVES – TA = 25°C

Figure 1. Output Current versus Input Voltage Figure 2. Output Current versus Input Current

400 400
I O , OUTPUT CURRENT (mA)

MC1416, B

I O , OUTPUT CURRENT (mA)

300 300 All Types
MC1413, B

200 200

100 100

0 0
0 1.0 2.0 3.0 4.0 5.0 8.0 9.0 10 11 12 0 50 100 150 200 250 300 350 400
VI, INPUT VOLTAGE (V) II, INPUT CURRENT (µA)

Figure 3. Typical Output Characteristics Figure 4. Input Characteristics – MC1413, B

800 2.5

700 PIN 13
IC , COLLECTOR CURRENT (mA)

2.0
I I, INPUT CURRENT (mA)

600 PIN 10 Maximum

500 1 Output Conducting at a Time
1.5
PIN 16 Typical
400

300 1.0

200
All Types 0.5
100
0 0
0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0
VCE(sat), SATURATION VOLTAGE (V) VI, INPUT VOLTAGE (V)

Figure 6. Maximum Collector Current

versus Duty Cycle
Figure 5. Input Characteristics – MC1416, B (and Number of Drivers in Use)
2.5 1000
1
IC, COLLECTOR CURRENT (mA)

700
NUMBER OF DRIVERS USED

2.0
I I, INPUT CURRENT (mA)

500 2

1.5
3
300
1.0 4
Maximum
200 5
6
0.5 Typical
7

0 100
0 5.0 6.0 7.0 8.0 9.0 10 11 12 10 20 30 50 70 100
VI, INPUT VOLTAGE (V) % DUTY CYCLE

MOTOROLA ANALOG IC DEVICE DATA 3

 MC1413, B MC1416, B

OUTLINE DIMENSIONS

P SUFFIX
PLASTIC PACKAGE
CASE 648–08
ISSUE R NOTES:
–A– 1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
16 9 3. DIMENSION L TO CENTER OF LEADS WHEN
FORMED PARALLEL.
B 4. DIMENSION B DOES NOT INCLUDE MOLD FLASH.
1 8 5. ROUNDED CORNERS OPTIONAL.
INCHES MILLIMETERS
DIM MIN MAX MIN MAX
F C L A 0.740 0.770 18.80 19.55
B 0.250 0.270 6.35 6.85
S C 0.145 0.175 3.69 4.44
D 0.015 0.021 0.39 0.53
SEATING F 0.040 0.70 1.02 1.77
–T– PLANE G 0.100 BSC 2.54 BSC
H 0.050 BSC 1.27 BSC
H K M J 0.008 0.015 0.21 0.38
J K 0.110 0.130 2.80 3.30
G L 0.295 0.305 7.50 7.74
D 16 PL
M 0_ 10 _ 0_ 10 _
0.25 (0.010) M T A M S 0.020 0.040 0.51 1.01

D SUFFIX
PLASTIC PACKAGE
CASE 751B–05
(SO–16)
–A– ISSUE J
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
16 9 2. CONTROLLING DIMENSION: MILLIMETER.
3. DIMENSIONS A AND B DO NOT INCLUDE
–B– MOLD PROTRUSION.
P 8 PL
4. MAXIMUM MOLD PROTRUSION 0.15 (0.006)
1 8
0.25 (0.010) M B S PER SIDE.
5. DIMENSION D DOES NOT INCLUDE DAMBAR
PROTRUSION. ALLOWABLE DAMBAR
PROTRUSION SHALL BE 0.127 (0.005) TOTAL
IN EXCESS OF THE D DIMENSION AT
MAXIMUM MATERIAL CONDITION.
G
MILLIMETERS INCHES
DIM MIN MAX MIN MAX
F A 9.80 10.00 0.386 0.393
K R X 45 _ B 3.80 4.00 0.150 0.157
C 1.35 1.75 0.054 0.068
D 0.35 0.49 0.014 0.019
C F 0.40 1.25 0.016 0.049
–T– SEATING G 1.27 BSC 0.050 BSC
PLANE
M J J 0.19 0.25 0.008 0.009
K 0.10 0.25 0.004 0.009
D 16 PL M 0_ 7_ 0_ 7_
P 5.80 6.20 0.229 0.244
0.25 (0.010) M T B S A S R 0.25 0.50 0.010 0.019

Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and
specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola
data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals”
must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of
others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other
applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury
or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola
and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees
arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that
Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal
Opportunity/Affirmative Action Employer.

How to reach us:

USA / EUROPE / Locations Not Listed: Motorola Literature Distribution; JAPAN: Nippon Motorola Ltd.; Tatsumi–SPD–JLDC, 6F Seibu–Butsuryu–Center,
P.O. Box 20912; Phoenix, Arizona 85036. 1–800–441–2447 or 602–303–5454 3–14–2 Tatsumi Koto–Ku, Tokyo 135, Japan. 03–81–3521–8315

MFAX: RMFAX0@email.sps.mot.com – TOUCHTONE 602–244–6609 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park,
INTERNET: http://Design–NET.com 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298

*MC1413/D*
4 ◊ MOTOROLA ANALOG IC DEVICE DATA
MC1413/D