915U-2 Wireless Mesh Networking I/O

and Gateway
Long range, scalable, industrial multiple I/O node and gateway

Features
• 902–928 MHz frequency hopping spread spectrum (FHSS) up to
1W RF Power
• 869 MHz wideband up to 500 mW for Europe
• Self‑healing IP‑based wireless mesh networking
• Multi‑hop repeater and gateway functionality
• Gather‑scatter and block mapping
• Serial client/server/multicast Modbus TCP to RTU gateway
• Configurable digital, pulse, and analog I/O to 14‑bit resolution
• 10/100Base‑T IEEE 802.3 Ethernet
• Secure 256‑bit AES encryption
• Modbus RTU and TCP support
• Over‑the‑air network diagnostics and configuration
Description • Optional support for logging of register variables & Event logging
The ELPRO 915U‑2 Wireless Mesh Networking I/O and
Gateway is a multiple I/O node that extends
communications to sensors and actuators in local, remote,
or difficult‑to‑reach locations. Designed with a long‑range,
Applications
license‑free wireless transceiver, the 915U‑2 can provide • Oil and gas production and distribution
IP‑based mesh networking across sprawling industrial
environments typical of industrial applications. • Pipeline monitoring and leak detection

Capable of ad‑hoc mesh networking, roaming and • Mining operations infrastructure

discovery, as well as deterministic mesh, the 915U‑2 can • Water treatment facilities
serve as an end node, a routing node, or a network
• Water and wastewater systems
gateway. Scalable to thousands of nodes, its gather‑scatter
and block mapping technology offers efficient utilization of
network resources and eases integration into complex Specifications
monitoring and control systems. Integrated Modbus® server
capability allows further I/O expansion through the use of SPECIFICATION DESCRIPTION
ELPRO 115S expansion modules. Transmitter and Receiver
Frequency 902–928 MHz a, 869.525 MHz, 869.875 MHz a
Transmit power 1 mW (+0 dBm) to 1W (+30 dBm) b
1 mW (+0 dBm) to 500 mW (+27 dBm) c
Transmission Frequency hopping spread spectrum (FHSS) b
Single frequency c
Modulation Frequency shift keying (FSK)
Receiver sensitivity –109 dBm @ 19.2 kbps (3% FER) b
–109 dBm @ 14.4 kbps (3% FER) c
Channel spacing 50 x 250 kHz b d, single 250 kHz c
Data rate 19.2–115.2 kbps a b, 14.4–76.8 kbps a c
Range (LoS) 20 miles (32 km) @ 1W b e
6 miles (10 km) @ 500 mW c e
Antenna connector 1 x female SMA standard polarity

Technical Data EL-915U-2 Effective September 2018

Technical Data EL-915U-2 915U-2 Wireless Mesh Networking I/O and Gateway
Effective September 2018

Specifications (continued)
SPECIFICATION DESCRIPTION SPECIFICATION DESCRIPTION
Input and Output Power Supply
Discrete input 8 digital I/O (1–4 configurable as PI or PO) Nominal supply 10.8–30 Vdc, under/over voltage protection
On-state voltage: <2.1 Vdc Average current draw 220 mA @ 12V (idle), 110 mA @ 24V (idle)
Wetting current: 5 mA Transmit current draw 500 mA @ 12V (1W), 250 mA @ 24V (1W)
Max. I/P pulse rate–DI 1/2: 50 kHz, DI 3/4: 1 kHz
Min. I/P pulse width–DI 1/2: 10 μs, PI 3/4: 0.2 ms NNote: Specifications are subject to change.
Discrete output 8 digital I/O (1–4 configurable as PI or PO) a Country-specific configuration (specified at d 18 channels New Zealand
On-state voltage–DO max.: 30 Vdc time of order) e Typical maximum line-of-sight range
Wetting current–DO max.: 200 mA b 900 MHz ISM band f Maximum distance 3937' (1200m)
Max O/P pulse rate–PO max. rate: 1 kHz c 869 MHz ISM band (Europe) g Optional, see 915U-TCP datasheet
Analog inputs 4 AI (2 differential, 2 single ended)
Current range: 0–24 mA
Current resolution: 14 bits
Accessories
Accuracy (current): 0.1% PRODUCT CODE DESCRIPTION
Voltage input range: AI 1/2: 0–25V, AI 3/4: 0–5V Soft Feature Keys
Voltage resolution: 14 bits Event Logging feature key
915U-AT
Accuracy (voltage): 0.1%
915U-LOG Data logging feature key
Analog output 2 AO (sourcing)
Interface
Current range: 0–24 mA
Current resolution: 13 bits 915U-TCADP T-type TCP thermocouple adapter, uses two
analog inputs and two analog outputs
Accuracy (current): 0.1%
Antennas - 900 MHz
Ethernet Port
DG800-1/5 Whip antenna, SMA male, angle bracket,
Ethernet port 10/100Base-T, RJ-45 connector, IEEE 802.3 DG900-1/5 –2 dBi gain, 3' (1m) or 16.4' (5m) coaxial cable
Link activity Link, 100Base-T via LED CFD890EL Dipole antenna, SMA male, mounting bracket,
Serial Port 2 dBi gain, 16' (5m) coaxial cable
RS-232 EIA-562 (R-45 connector) SG900EL Collinear antenna, N-type female, 5 dBi gain
RS-485 2-pin terminal block, non-isolated f SG900-6 Collinear antenna, N-type female, 8 dBi gain
Data rate (bps) 1200, 2400, 4800, 9600, 14400, 19200, 38400, 57600, 76800, Cables
115200, 230400 ETH-C5A Ethernet cable, 6' (1.8m), straight through,
Serial settings 7/8 data bits, stop/start/parity (configurable) RJ-45 to RJ-45
Protocols and Configuration SER-RJ45 Configuration cable, RS-232 serial, DB-9
remale to RJ-45
System address ESSID, 1 to 31-character text string
Surge Diverters
Protocols supported TCP/IP, UDP, HTTP, FTP, TFTP, TELNET, Modbus, Modbus TCP
CSD-SMA-2500 SMA surge diverter for use with CC10/CC20-SMA
User configuration All user-configurable parameters via HTTPS
CSD-N-6000 Coaxial surge diverter, bulkhead N female to
Configurable Unit details, I/O mappings and parameters, radio settings (for N female
parameters more information, refer to the user manual)
MA15D1SI/D2SI Power supply surge diverter, 110 Vac/15A or
Modbus TCP/ RTU gateway 240 Vac/15A
Embedded Modbus master/slave for I/O transfer
IOP32D Signal surge diverter, 2 x 2-wire/1 x 4-wire
Security Data encryption, 256-bit AES, secure HTTP protocol Power Supplies PS-DINAC-12DC-OK DIN rail power supply, 100–250 Vac, 12 Vdc/2.5A
LED Indication and Diagnostics
LED indication Power/OK, TX/RX, RS-232, RS-485, digital I/O, analog I/O status
PSG60E DIN rail power supply, 85–264 Vac, 24 Vdc/2.5A TD032034EN
Reported diagnostics RSSI measurements (dBm), connectivity information/statistics,
system log file NNotee: More accessories are available for this product including antennas,
Network management Optional network management system cables, and mounting brackets. Refer to our Website for details.
Compliance
EMC FCC Part 15; EN 301 489; AS 3548
Ordering
RF (radio) FCC Part 15.247; EN 300 220; AS 4268.2; RFS29 NZ PRODUCT CODE DESCRIPTION FREQUENCY RF POWER

Hazardous area UL/CSA Class I, Division 2; ATEX; IECEx Na IIC 915U-2 Wireless mesh I/O 902–928 MHz 1W
Safety IEC 60950 (RoHS compliant) 915U-2 Wireless mesh I/O 869.525 MHz 500 mW
UL UL listed 915U-2 Wireless mesh I/O 869.875 MHz 5 mW
General
Size 5.91" x 7.09" x 1.38" (180 mm x 150 mm x 35 mm)
Housing IP20 rated high-density thermoplastic
Mounting DIN rail
Terminal blocks Removable, max. conductor 12 AWG 0.1 in.2 (2.5 mm2)
Temperature rating –40 to +140°F (–40 to +60°C)
NNote: Available RF power and frequency may vary depending on country of
Humidity rating 0–99% RH noncondensing application.
Weight 1.1lb (0.5 kg) a Additional memory for logging of data and administration events

2
Technical Data EL-915U-2 915U-2 Wireless Mesh Networking I/O and Gateway
Effective September 2018

North America & Latin America

5735 W. Las Positas Suite 100
ELPRO Technologies
Pleasanton, CA 94588

9/12 Billabong Street

Telephone: +1 925 924 8500
Stafford Queensland 4053 Australia

Telephone:
Global: +61 7 3352 8600
USA: +1 855 443 5776

sales@elpro.com.au
www.elpro.com.au ELPRO Technologies is a registered
trademark.
© 2018 ELPRO Technologies All
Rights Reserved All other trademarks are property
Publication No. EL-915U-2 of their respective owners.
September 2018