Allama Iqbal Open University, Islamabad (Commonwealth MBA/MPA Programme) Warning

ALLAMA IQBAL OPEN UNIVERSITY, ISLAMABAD
(Commonwealth MBA/MPA Programme)

WARNING
1. PLAGIARISM OR HIRING OF GHOST WRITER(S) FOR SOLVING
THE ASSIGNMENT(S) WILL DEBAR THE STUDENT FROM AWARD
OF DEGREE/CERTIFICATE, IF FOUND AT ANY STAGE.
2. SUBMITTING ASSIGNMENT(S) BORROWED OR STOLEN FROM
OTHER(S) AS ONE’S OWN WILL BE PENALIZED AS DEFINED IN
“AIOU PLAGIARISM POLICY”.
Course: Quality Management (5575) Semester: Autumn, 2022
Level: Executive MBA/MPA
GUIDELINES FOR DOING ASSIGNMENTS

We expect you to answer each question as per instructions in the assignment. You will
find it useful to keep the following points in mind:
1) Planning: Read the assignments carefully, go through the Units on which they are
based. Make some points regarding each question and then rearrange them in a
logical order.
2) Organization: Be a little selective and analytical before drawing up a rough
outline of your answer. Give adequate attention to question’s introduction and
conclusion.
Make sure that:
a) The answer is logical and coherent,
b) It has clear connections between sentences and paragraphs,
c) The presentation is correct in your own expression and style.
3) Presentation: Once you are satisfied with your answer, you can write down the
final version for submission. It is mandatory to write all assignments neatly. If you
desire so, you may underline the points you wish to emphasize. Make sure that the
answer is within the stipulated word limit.
ASSIGNMENT No. 1
Total Marks: 100 Pass Marks: 40
Q. 1 Describe the meaning of quality in its true spirit for a services organization. How
the quality can be judged from a customer’s view point? Discuss with the
perspective of fitness to standard and fitness to use. (20)
Q. 2 Elaborate the role of leadership in implanting the total quality management

program in an organization. What critical issues leadership has to tackle while
implementing the quality program in a manufacturing concern? Support your
answer with real time example. (20)
Q. 3 The quality begins with the customer and ends on the customer. Provide logical
justifications about this statement. How far it has concern with the customer
relationship programs and why? Support your answer with any Multinational
Corporation operating in Pakistan. (20)
Q. 4 Quality management programs and strategies cannot be developed and

implemented in isolation. Do you agree or disagree with this statement? What
critical success factors you consider to be the most important to address from
human resources perspective during quality implementation phase. (20)
Q. 5 Why ISO certification is important for both service and manufacturing

organizations? Select an organization and guide through the initial steps in the
certification process. Help the organization to make a decision regarding ISO
certification, with reference to the strengths and drawbacks of ISO, as to whether or
not certification would be advantageous. (20)
ASSIGNMENT No. 2
Total Marks: 100 Pass Marks: 40
Instructions:
1. This assignment is a research-oriented activity. You are required to develop a term
paper and submit to the tutor for evaluation prior to the final examination. The last
date of this assignment will be notified separately by our directorate of regional
services and the same will be communicated to you directly as well as through
approved study centers assigned to you.
2. You will have to participate in the activity fully, actively, and practically to be
eligible to sit in the final examination of the course.
3. For the preparation of this assignment, you should first thoroughly review the
conceptual framework of the topic and develop a scholarly material of the same
2
giving references, quotations, and extracts of various scholars and experts. Then
visit any business/commercial organization and study the relevant practical aspects
there. Combining the theoretical and practical aspects, develop a comprehensive
paper consisting of at least 20 to 25 typed pages to be submitted to your tutor.
a) Introduction to the topic
b) Important sub-topics
c) Practical study of the organization with respect to the topic
d) Review of theoretical and practical situations, merits, de-merits deficiencies or
strengths of the organization with respect to the topic under study.
e) Conclusion and recommendation
f) Annex, if any
4. Prepare a copy of this assignment and submit to your tutor for your evaluation.
5. You should add any illustrative material/data/tables/analysis for effective submission.
6. If you fail to submit this assignment in the class, then you will not be able to sit in
the final examination conducted by AIOU.
7. A number of topics given below are the general aspects of the course and you are
required to select one of the topics according to the last digit of your roll number.
For example, if the roll number is N-9337241, you will select topic number 1, and
if the roll number is O-3427185 then you will select topic number 5 (the last digit).
List of Topics:
0. TQM and WTO in Pakistan
1. Impact of Total Quality Management on Strategy of a Company
2. Challenges for Quality Professionals in Pakistan
3. Application of PDCA cycle in Service Organization of Pakistan
4. How Quality Control Gets in the Way of Quality
5. Role of Team in QFD
6. Integration of ISO 14000 and ISO 9000 Series
7. The Baldrige Awards Standards
8. Team Role in a Business Organization from Quality Management Perspective
9. Final Inspection and Quality Testing Challenges in Pakistan
3
COURSE OUTLINES
QUALITY MANAGEMENT (5575)
MODULE 1: INTRODUCTION TO QUALITY MANAGEMENT

Introduction to Quality Management
Introduction
Concept of quality management
An overview of quality management
Philosophy of quality management
Principles of total quality – an integration
Types of quality efforts
MODULE 2: LEADERSHIP AND STRATEGIC MANAGEMENT

Leadership and Strategic Management
Introduction
Leadership
Demonstrating quality values throughout the organisation
The role of quality professionals
Strategic quality management
MODULE 3: CUSTOMER AND MARKET FOCUS

Customer and Market Focus
Introduction
Concept
Customers as partners
Managing supplier relationships
MODULE 4: QUALITY IN HUMAN RESOURCES

Quality in Human Resources
Introduction
A house of quality for human resources
MODULE 5: TOOLS AND TECHNIQUES FOR QUALITY

MANAGEMENT
Tools and Techniques for Quality Management
Introduction
Tools for data collection and interpretation
Tools for planning
Tools for continuous improvement
The P-D-S-A cycle
Six Sigma
Quality circles
4
MODULE 6: INTERNATIONAL ORGANIZATION FOR
STANDARDISATION
International Organisation for Standardisation - Universal Standards of Quality
Introduction
The history of ISO
What is ISO, and ISO certification?
Why are the standards important?
Manuals and documentation
Where can ISO information be found?
The Baldrige Awards
MODULE 7: QUALITY MANAGEMENT AND CHANGE

Quality Management and Change
Introduction
The goal of quality change
Team and team building in the context of QM
Culture and cultural change
Should consultants be used to define and implement change?
Conclusion
Recommended Books:
1. Total Quality Management
By: Dale H. Bester field
Edition: Third
2. Quality Management
By: Donna C.S. Summers
3. Total Quality Management

By: Joel E. Ross
Edition: Third


Allama Iqbal Open University, Islamabad (Commonwealth MBA/MPA Programme) Warning

Uploaded by

Copyright:

Available Formats

Allama Iqbal Open University, Islamabad (Commonwealth MBA/MPA Programme) Warning

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Allama Iqbal Open University, Islamabad (Commonwealth MBA/MPA Programme) Warning

Uploaded by

Copyright:

Available Formats

ALLAMA IQBAL OPEN UNIVERSITY, ISLAMABAD

(Commonwealth MBA/MPA Programme)

GUIDELINES FOR DOING ASSIGNMENTS

Q. 2 Elaborate the role of leadership in implanting the total quality management

Q. 4 Quality management programs and strategies cannot be developed and

Q. 5 Why ISO certification is important for both service and manufacturing

MODULE 1: INTRODUCTION TO QUALITY MANAGEMENT

MODULE 2: LEADERSHIP AND STRATEGIC MANAGEMENT

MODULE 3: CUSTOMER AND MARKET FOCUS

MODULE 4: QUALITY IN HUMAN RESOURCES

A house of quality for human resources

MODULE 5: TOOLS AND TECHNIQUES FOR QUALITY

MODULE 7: QUALITY MANAGEMENT AND CHANGE

3. Total Quality Management

You might also like