Genec W35
Genec W35
Genec W35
the air temperature after the intercooler
Fuel system with A1 class electronic mechanical strength
governing Standard integral set-mounted
radiator system,
Control Module Specifications
designed and tested for 50°C ambient temperature
First fill of lube oil and coolant The DSE6020 is an Auto Mains Failure Control
Electrical starter motor with soft start engagement Module
feature
Intelligent fuel injection technology to start Back-lit LCD display
fast guarantee 3 Phase generator and 3 Phase Mains
Battery charging alternator monitoring
1 x 12 V DC batteries Monitoring speed, frequency, voltage, current,
oil pressure, coolant temperature and fuel level
Display warning, shutdown and engine
status information
Hours counter provides accurate
information for
monitoring and maintenance
.ec
Technical Data
Generator Set Specification
ww w www.dinatek.ec
Remarks
Prime Rating: These ratings are applicable for supplying continuous electrical power (at variable load)
in the lieu of commercially purchased power. There is no limitation to the annual hours of operation and
this model can supply 10% overload power for 1 hour in 12 hours.
Standby Rating: These ratings are applicable for supplying continuous electrical power (at variable load)
in the event of a utility power failure. No overload is permitted on these ratings. The alternator on this
model is peak continuous tested (as defined in ISO 85283).
A B C
GENSET LENGTH mm WIDTH mm HEIGHT mm
W25M 1400 780 1150
W35 1400 780 1150
W50 1470 780 1130