■ Model: KT-C110/S Powered by CUMMINS engine

■ Generator Specification
General Characteristics PRP(1) ESP(2) General Data
Power (kVA) 100 110 Engine brand CUMMINS POWER
Power (kW) 80 88 Engine model 6BT5.9-G2
Rated speed (r.p.m) 1800 Alternator brand SAC POWER
Frequency 60 Alternator model SAC-80
Standard voltage (V) 400/230V Controller brand Deepsea
Power factor (cos φ) 0.8 Controller model DSE6120MKII
■ General Features
Every generator set are compliant with ISO 9001 Performance Data
and CE standard, which include the following Noise dB(A)@7m 70
directives: Speed control type Electronic
· 2006/42/EC Machinery safety Control system Digital
· 2006/95/EC Low voltage Starter motor voltage 24V
· EN 60204-1: 2006+A1: 2009, EN 12601: 2010 100% standby power 26.9
Fuel
EN ISO 12100: 2010, EN ISO 13849-1: 2008 100% prime power 24.2
consumption
■ FAQ (L/h)
75% prime power 18.2
(1) PRP (Prime Power): 50% prime power 12.5
This rating is for the supply of continuous electrical
power (at variable load). There is no limit on the annual Environment Conditions
hours of operation and 10% overload power can be Environment temperature ℃ ≤40
supplied for 1 hour in 12. Relative humidity % ≤90
(2) ESP (Standby Power): Altitude m ≤1000
This rating is for the supply of continuous electrical
power (at variable load) in the event of a utility power
failure. No overload is permitted.

Powers PRP ESP Standby Dimension and Weight

Voltage (V) KVA KW KVA KW Amps Dimension Open Silent
415/240 100 80 110 88 139.12 Length (L) mm 2220 2900
400/230 100 80 110 88 144.34 Width (W) mm 950 1100
380/220 100 80 110 88 151.93 Height (H) mm 1530 2000
Net Weight KG 1200 1900
Available with customer requirements. Fuel Tank L 200 200
■ Engine Specifications
Engine model 6BT5.9-G2
Engine manufacturer CUMMINS POWER
Number of cylinders 6
Cylinder arrangement Vertical in-line
Cycle 4 stroke
Aspiration Turbocharged
Bore x Stroke (mm x mm) 102 x 120
Displacement (Liter) 5.9
Compression Ratio 17.3:1
Prime power/speed (kW/RPM) 96/1500
Standby power/speed (kW/RPM) 106/1500
Speed governor BYC PB/Electronic
Cooling system Forced Water Cooling Cycle
Steady speed droop (%) ≤1%
Total lubrication system capacity (L) 16.4
Coolant capacity (engine only) (L) 7.9
Fuel consumption at 100% load (g/kWh) 208 (24.2L/hr)
Starter motor DC24V
Alternator (Dynamo) AC24V

· Engine: BS5514 and DIN-6271 standards are based on ISO-3046

■ Alternator Specifications
Alternator model SAC-80 (Stamford Technology)
Alternator manufacturer SAC POWER
Exciter type Single bearing, Brushless, Self-excited
Rated output prime power 100 kVA / 80 kW
Rated speed 1800 RPM
Rated frequency 60 Hz
Phase 3
Rated voltage 400V (Available with customer requirements)
Power factor 0.8
Voltage adjust range ≥5%
Voltage regulation NL-FL ≤±1%
Insulation grade H
Protection grade IP23

· Alternator: BS EN 60034 and the relevant section of other international standards such as BS5000,
VDE 0530, NEMA MG1-32, IEC34, CSA C22.2-100, AS1359

· Alternator option:
Other alternator manufacturer: copy Stamford, Leroy Somer, Marathon and Mecc Alte.
■ Options
Engine Alternator Generator Sets Fuel System
· Water Pre-heater · Winding temperature · Tools with the · Low fuel level alarm
· Oil Preheater measuring instrument machine · Automatic fuel
· · Alternator Pre-heater · Extended range feeding system
· PMG fuel tank · Fuel T-valves
· Anti-damp and · Bunded fuel tank
anti-corrosion treatment
· Anti-condensation heater
· Winding and bearing RTD
Canopy Lubricating System Cooling System Control Panel
· Rental type · Oil Pre-heater · Front heat protection · Remote control panel
· Trailer · Oil temp sensor · Coolant (-30℃) · ATS
· · · · Synchronizing controller
· Adjustable earth leakage
relay

■ Control Panel
Configuration Benefits
· Emergency stop button · Less wiring and components
· Protection MCB · Integrated solution
· Battery charger · Less engineering and programming
· Integrated aviation plug · User friendly set-up and button layout
· ATS connection · Module can be configured to suit individual
· Digital control module applications
· PC software for simplified configuration
· Wide range of communication capabilities
Features Operation conditions
· Generator set monitoring · Operation temp: -20 ℃ to +70 ℃
· Support of engines equipped with electronic · Storage temp: -30 ℃ + 80 ℃
control unit · Operation humidity: 95% w/o condensation
· Comprehensive diagnostic message · Shocks: a=500 m/s2
· Automatic or manual start/stop of the gensets Operation conditions
· Push buttons for simple control, lamp test · Ethernet interface (Remote monitoring and control)
· Graphic back-lit LCD display · GSM module / wireless internet
· Parameters adjustable via keyboard or PC · RS232-RS485 dual port interface
· Mains measurements (50Hz/60Hz) · Synchronizing control panel
· Generator measurements (50Hz/60Hz) · Distribution board with sockets and power busbar
· Comprehensive shutdown or warning on fault · Battery trickle charge ammeter
condition · Earth leakage protection
· Generator set protections · Earth fault protection
· AMF function · Engine coolant heater controls
· Configurable analog inputs · Speed adjust switch
· Battery voltage, engine speed measurement · Oil temp displayed on LCD screen
· Module communication support · Additional 8 inputs and outputs