Parts List 20 254 21 00

Spiroplan gear unit EN Page 1 / 3

WA20, WAF20 EG 12.03.2020

When ordering spare parts always quote nameplate data with serial number and designation with part number!
Joining of the gears according to MS 01 901 3

Copyright reserved! All rights reserved according to DIN ISO 16016.

SEW-EURODRIVE GmbH & Co KG Postfach 3023 D-76642 Bruchsal Tel. (07251) 75-0 Fax (07251) 75-1970 http://www.sew.de
Parts List 20 254 21 00
Spiroplan gear unit EN Page 2 / 3
WA20, WAF20 EG 12.03.2020

No. Description Additional specifications SEW standard label Part No. Qty.
1 Pinion not with servomotor or servo adapter * 1
6 Wheel * 1
7 Hollow Shaft Ø 18 mm 10610693 1
7 Hollow Shaft Ø 20 mm 10610782 1
7 Hollow Shaft (inch) Ø 0,750 in. 10610790 1
9 Oil seal W AS30x55x7-NBR 00138967 1
9 Oil seal optional oil seal in FKM; ATEX model W AS30x55x7-FKM 00176826 1
according to category II2G, II2D, II3G, II3D
11 Deep groove ball bearing 6006-Z 00117455 1
12 Retaining ring DIN472 55x2-FS 00103357 1
14 Cap screw WAF20 ISO4762 A-M6x20-8.8-A2F 00110337 4
16 Output Flange WAF20 Ø 110 mm 01682830 1
16 Output Flange WAF20 Ø 120 mm 01682822 1
19 Key DIN6885-1 B6x6x10 +QT+C 13227610 1
22 Gear unit housing mounting DR..63/71 0168082X 1
22 Gear unit housing mounting DR..80 10612939 1
22 Gear unit housing mounting CMP.., EWH02 10612955 1
25 Deep groove ball bearing 6006-Z 00117455 1
29 Sealing compound 09112324 X)
65 Oil seal mounting DR..63/71 DIN A28x47x7-NBR 00111481 1
65 Oil seal optional oil seal in FKM; ATEX model W A28x47x7-FKM-FKO 0015945X 1
according to category II2G, II2D, II3G, II3D;
mounting DR..63/71
65 Oil seal optional oil seal PSS; mounting DR..63/71 W PSS28x47x7-FKM 19168551 1
65 Oil seal mounting DR..80 DIN A35x52x7-NBR 00106232 1
65 Oil seal optional oil seal in FKM; ATEX model W A35x52x7-FKM-FKO 13228668 1
according to category II2G, II2D, II3G, II3D ;
mounting DR..80
65 Oil seal optional oil seal PSS; mounting DR..80 W PSS35x52x7-FKM 19168683 1
65 Oil seal For ambient temperatures < -25°C; DIN A28x52x7-NBR 13293214 1
mounting CMP.., EWH02
65 Oil seal FKM oil seal; ATEX model according to W A28x52x7-FKM-FKO 13272187 1
category II2G, II2D, II3G, II3D ;
mounting CMP.., EWH02
65 Oil seal optional oil seal PSS; mounting CMP.., W PSS28x52x7-FKM 19168578 1
EWH02
66 Deep groove ball bearing mounting DR..63/71 6305-2Z-C3-K52 13280449 1
66 Deep groove ball bearing For ambient temperatures > 80°C; mounting 6305-2Z-C3-K17 13270192 1
DR..63/71
66 Deep groove ball bearing For ambient temperatures < -20°C; ATEX 6305-2RS-C3-K24 00160865 1
model according to category II2G, II2D,
II3G, II3D; mounting DR..63/71
66 Deep groove ball bearing mounting DR..80 6306-2Z-C3-K52 13236571 1
66 Deep groove ball bearing For ambient temperatures > 80°C; mounting 6306-2Z-C3-K17 00170089 1
DR..80
66 Deep groove ball bearing For ambient temperatures < -20°C; ATEX 6306-2RS-C3-K24 00160873 1
model according to category II2G, II2D,
II3G, II3D; mounting DR..80
68 Retaining ring mounting DR..63/71 DIN472 62x2-FS 00103217 1
68 Retaining ring mounting DR..80 DIN472 72x2,5-FS 00103225 1
71 supporting ring only with mounting DR..63/71 DIN988 S25x35x2-FS 00103454 1
72 Retaining ring mounting DR..63/71 DIN471 25x1,2-FS 00102741 1
72 Retaining ring mounting DR..80 DIN471 30x1,5-FS 00102776 1
88 Retaining ring DIN472 55x2-FS 00103357 1
91 Retaining ring Hollow shaft Ø 18 mm DIN472 18x1-FS 00114545 1
91 Retaining ring Hollow shaft Ø 20 mm DIN472 20x1-FS 00130079 1

* Gearing parts have embossed part numbers. These must always be quoted!
X) if required
When ordering spare parts always quote nameplate data with serial number and designation with part number!
Joining of the gears according to MS 01 901 3

Copyright reserved! All rights reserved according to DIN ISO 16016.

SEW-EURODRIVE GmbH & Co KG Postfach 3023 D-76642 Bruchsal Tel. (07251) 75-0 Fax (07251) 75-1970 http://www.sew.de
Parts List 20 254 21 00
Spiroplan gear unit EN Page 3 / 3
WA20, WAF20 EG 12.03.2020

No. Description Additional specifications SEW standard label Part No. Qty.
91 Retaining ring Hollow shaft Ø 0,750 in. DIN472 19x1-FS 00130125 1
92 Disk Hollow shaft Ø 18 mm W4126 6,4x17,8x4-St-BA 00126268 1
92 Disk Hollow shaft Ø 20 mm W4126 6,4x19,8x4-St-BA 00112283 1
92 Disk Hollow shaft Ø 0,750 in. W4126 0,31x0,74x3/16-St-BA 08069727 1
93 Lock washer Hollow shaft Ø 18 mm; Ø 20 mm DIN128 A6-FS-Q3F 00109908 1
93 Lock washer Hollow shaft Ø 0,750 in. ASME 1/4-FS-A2F 08068852 1
94 Hex head screw Hollow shaft Ø 18 mm; Ø 20 mm ISO4017 A-M6x16-8.8-A2F 00101052 1
94 Hex head screw Hollow shaft Ø 0,750 in. ASME A-UNC1/4-20x5/8-GR5- 08069549 1
95 Closing plug Hollow shaft Ø 18 mm W4299 1-18,4-PE-LD-NA 09439943 1
95 Closing plug Hollow shaft Ø 20 mm W4299 1-20,7-PE-LD-BK 01147439 1
95 Closing plug Hollow shaft Ø 0,750 in. W4299 1-19,3-PE-LD-NA 19072139 1
99 Hood cover complete 10687998 1
100 Gear unit cover 01680838 1
101 Hex head screw ISO4017 A-M6x16-8.8-A2F 00101052 4
102 Gasket 01680846 1
143 supporting ring mounting DR..63/71 DIN988 S25x35x2-FS 00103454 1
143 supporting ring mounting DR..80 DIN988 S30x42x2,5-FS 00103489 1
149 supporting ring mounting CMP.., EWH02 W4140 S45x62x3-FS 00120391 1
168 Closing plug Hollow shaft Ø 18 mm W4299 1-18,4-PE-LD-NA 09439943 1
168 Closing plug Hollow shaft Ø 20 mm W4299 1-20,7-PE-LD-BK 01147439 1
168 Closing plug Hollow shaft Ø 0,750 in. W4299 1-19,3-PE-LD-NA 19072139 1
183 Oil seal W AS30x55x7-NBR 00138967 1
183 Oil seal optional oil seal in FKM; ATEX model W AS30x55x7-FKM 00176826 1
according to category II2G, II2D, II3G, II3D
335 Torque arm complete 01680730 1
335 Torque arm complete stainless steel (Niro); with fastening kit 10638032 1
337 Fastening kit optional for torque arm 18760562 1
518 Shim DIN988 45x55x0,1-St 00103888 X)
519 Shim DIN988 45x55x0,3-St 0011345X X)
520 Shim DIN988 45x55x0,5-St 00123471 X)
521 Shim DIN988 45x55x0,1-St 00103888 X)
522 Shim DIN988 45x55x0,3-St 0011345X X)
523 Shim DIN988 45x55x0,5-St 00123471 X)
564 Shim mounting DR..63/71 DIN988 25x35x0,1-St 00103691 X)
564 Shim mounting DR..80 DIN988 30x42x0,1-St 00103853 X)
577 Shim DIN988 45x55x0,15-St 19060955 X)
578 Shim DIN988 45x55x0,15-St 19060955 X)
990 Contact corrosion inhibitor 09107819 1

X) if required
When ordering spare parts always quote nameplate data with serial number and designation with part number!
Joining of the gears according to MS 01 901 3

Copyright reserved! All rights reserved according to DIN ISO 16016.

SEW-EURODRIVE GmbH & Co KG Postfach 3023 D-76642 Bruchsal Tel. (07251) 75-0 Fax (07251) 75-1970 http://www.sew.de