Professional Documents
Culture Documents
CMP Liner Blue: CMP LNR BL CMP LNR BL CMP LNR BL CMP LNR BL
CMP Liner Blue: CMP LNR BL CMP LNR BL CMP LNR BL CMP LNR BL
2014
CMP LINER BLUE No. 6461B
(CMP LNR BL )
CMP LINER BLUE is solvent-free epoxy chocking or grouting material that supports permanently
all size and type of main engine and marine auxiliary equipment. CMP LINER BLUE is designed to
withstand severe marine and industrial environments involving a high degree of both physical and
thermal shock.
CMP LINER BLUE is non-shrinking and has very high impact resistance and compressive
strength.
TECHNICAL DATA
Type Thermosetting material
RecommendedUse Under diesel and gas engines, reduction gears, generators, compressors, pumps,
bearing blocks, crane rails and numerous other applications.
Information Mixing Ratio : BASE : HARDENER* = 87 : 13 [by volume]
Color : Blue
Flash Point : BASE = 254, HARDENER* = 132 [˚C]
Density : 1.54 [g/mL] (ISO:2811)
Volume solids (VS) : 99 [volume %]
VOC : 51 [g/L] (Method24)
Coverage(Theoretical): 12 - 55 [L/m2]
Film Thickness : WET 12 - 55 [mm]
DRY 12 - 55 [mm]
o o o
15 C 20 C 25 C
Drying Time Set-to-touch - - -
Hard Dry 48hrs. 24hrs. 18hrs.
Painting Interval Min
Max
Pot Life ** 40mins. 30mins. 25mins.
Condition Method of Application : Please refer "Application Method of CMP LINER BLUE"
of Weather : Temperature:13 - 35 ˚C, Humidity:Maximum 90 %RH
Application Thinner : EPOXY THINNER A (for cleaning only)
Preceding Coats : -
Subsequent Coats : -
Packaging Two pack product
Notes 1.When film thickness is 55 mm, Please contact us.
2.Please decide the mixed ratio of Base and Hardener with reference to the
guidelines on “Application Method of CMP LINER BLUE”.
3.Pot life is short. Please mix only required amount.
(Pot life: Time before temperature reaching 50˚C for liquid mixture)**
4.When Temperature of the resin is less than 20˚C in use, please warm CMP LINER
BLUE BASE.
5.When the temperature of the steel plate to pour is less than 13˚C, please warm
there.
6.Density, VS and VOC are measurement data of product samples. Values may vary
depending on manufacturing process, local regulations, etc.
7. COMPRESSIVE STRENGTH :200MPa(ASTM D-695MOD)
COMPRESSIVE MODULUS OF ELASTICITY :3045MPa(ASTM D-695)
THE RATE OF CHANGE IN CREEP STRAIN :-0.14%(ASTM D-621)
FLEXURAL STRENGTH :217MPa(ASTM C-580)
FLEXURAL MODULUS OF ELASTICITY :307MPa (ASTM C-580)
TENSILE STRENGTH :30.2MPa (ASTM D-638)
SHEAR STRENGTH :72.5MPa (ASTM D-732)
IZOD IMPACT STRENGTH :1.6kJ (JIS K7110)
FIRE RESISTANCE :Self extinguishing (ASTM D-635)
BARCOL HARDNESS :57 (ASTM D-2583)
8.Fundamental BARCOL HARDENESS : 35 - 65
This product should be used only by professional applicators. Consult the current Chugoku Marine Paints Safety Data Sheets.
Follow all local or national health, safety and environmental regulations. Observe all safety labels on packaging and containers.
Take precautions against possible risks of fire or explosions as well as protection of the environment . Apply only at ventilated
areas. Handle with care.
This data sheet contains the best and latest of our knowledge on the date of issue on our laboratory in Japan testing and practical
application experience, and subject to change without notice. Since the paints are used under unexpected circumstances in some
cases, guarantee can not be given except on the quality of those paints themselves .