CERTIFICATE

(1) EU-Type Examination

(2) Equipment or protective systems intended for use in
potentially explosive atmospheres - Directive
2014/34/EU
(3) EU-Type Examination Certificate Number: KEMA 03ATEX1561 Issue Number: 5

(4) Product: Pressure transmitter

CERABAR-S Types PMP71, PMP75 and PMC71 and
DELTAPILOT-S Type FMB70 and
Differential pressure transmitter
DELTABAR-S Types PMD75, FMD77 and FMD78
(5) Manufacturer: Endress+Hauser GmbH+Co. KG

(6) Address: Hauptstraße 1, 79689 Maulburg, Germany

(7) This product and any acceptable variation thereto is specified in the schedule to this certificate and the documents
therein referred to.

(8) DEKRA Certification B.V., Notified Body number 0344 in accordance with Article 17 of Directive 2014/34/EU of the
European Parliament and of the Council, dated 26 February 2014, certifies that this product has been found to
comply with the Essential Health and Safety Requirements relating to the design and construction of products
intended for use in potentially explosive atmospheres given in Annex II to the Directive.

The examination and test results are recorded in confidential test report number NL/KEM/ExTR06.0005/05.

(9) Compliance with the Essential Health and Safety Requirements has been assured by compliance with:

EN 60079-0 : 2012 + A11 : 2013 EN 60079-11 : 2012 EN 60079-26 : 2015 EN 60079-31 : 2014
except in respect of those requirements listed at item 18 of the Schedule.

(10) If the sign ”X” is placed after the certificate number, it indicates that the product is subject to the Specific Conditions
of Use specified in the schedule to this certificate.

(11) This EU-Type Examination Certificate relates only to the design and construction of the specified product. Further
requirements of the Directive apply to the manufacturing process and supply of this product. These are not covered
by this certificate.

(12) The marking of the product shall include the following:

II 1/2 G Ex ia IIC T6 ... T2 Ga/Gb or

II 2 G Ex ia IIC T6 ... T2 Gb and/or
II 1 D Ex ia IIIC T85 °C Da
II 1/2 D Ex ia IIIC T85 °C Da/Db or
Ex ta/tb IIIC T85 °C Da/Db or
II 1/3 D Ex ta/tc IIIC T85 °C Da/Dc

Date of certification: 16 February 2017

DEKRA Certification B.V.

R. Schuller
Certification Manager Page 1/4

©
Integral publication of this certificate and adjoining reports is allowed. This Certificate may only be reproduced
in its entirety and without any change.

DEKRA Certification B.V. Meander 1051, 6825 MJ Arnhem P.O. Box 5185, 6802 ED Arnhem The Netherlands
T +31 88 96 83000 F +31 88 96 83100 www.dekra-certification.com Registered Arnhem 09085396
(13) SCHEDULE
(14) to EU-Type Examination Certificate KEMA 03ATEX1561 Issue No. 5

(15) Description

Pressure transmitters CERABAR-S Types PMP71, PMP75 and PMC71 and DELTAPILOT-S
Type FMB70 and Differential pressure transmitters DELTABAR-S Types PMD75, FMD77 and
FMD78 are used in potentially explosive atmospheres for the measurement of level, flow,
differential pressure, over- and under pressure.

Depending on the electronics insert the output of the Pressure or Differential Pressure Transmitter
is a
4 - 20 mA current output signal with a superimposed HART digital signal, or the transmitter is
connected to a Fieldbus system for the supply and the communication.

The several versions of the Pressure Transmitters differ in type of sensor, type of electronics
insert, type of enclosure, process connection etc.

Optionally all versions of the Pressure and Differential Pressure Transmitters may be provided
with an indicator and/or overvoltage protection.

A certified intrinsically safe device may be connected to the display interface of all versions for
service purposes.

Optionally all intrinsically safe versions of the Pressure and Differential Pressure Transmitters
may be provided with an extended sensor cable.

The enclosure of the apparatus provides a degree of protection of at least IP66 and IP67 in
accordance with EN 60529.

Thermal data

Ambient temperature range -50 ºC to +70 ºC.

Transmitters of equipment protection level Ga/Gb and Gb

The relation between the temperature class, the ambient temperature and the process
temperature is given in the following table:

Temperature Ambient Process

class temperature temperature
T6 ≤ 40 °C ≤ 80 °C
T4 ≤ 70 °C ≤ 120 °C
T3 ≤ 70 °C ≤ 180 °C
T2 ≤ 70 °C ≤ 280 °C

The maximum allowed process temperature for the different types of Pressure Transmitters and
Differential Pressure Transmitters is listed in the relevant equipment manuals.

Transmitters of equipment protection level Da, Db and Dc

The maximum surface temperature of the enclosure T85 °C is based on the maximum ambient
temperature of 70 °C with a dust layer up to 5 mm.

Page 2/4

Form 227A
Version 1 (2016-04)
(13) SCHEDULE
(14) to EU-Type Examination Certificate KEMA 03ATEX1561 Issue No. 5

Electrical data

Equipment in type of protection intrinsic safety “i”

Transmitters with electronics insert 4 - 20 mA HART or 4 - 20 mA HART (SIL version)

Supply and output circuit (Terminals + and – or connector):

in type of protection intrinsic safety Ex ia IIC and Ex ia IIIC, only for connection to a certified
intrinsically safe circuit, with the following maximum values:
Ui = 30 V; Ii = 300 mA; Pi = 1 W; Li = 225 µH; Ci = 11,8 nF (output options A, B and C);
Ui = 30 V; Ii = 300 mA; Pi = 1 W; Li = negligible; Ci = 11,8 nF (output options D, E and F).

Transmitters with electronics insert Profibus PA or Foundation Fieldbus

Supply and output circuit (terminals 1 and 2):

in type of protection intrinsic safety Ex ia IIC and Ex ia IIIC, only for connection to a certified
intrinsically safe Fieldbus system, e.g. according to FISCO, with the following maximum values:
Ui = 17,5 V; Ii = 500 mA; Pi = 5,5 W; Li = 10 µH; Ci = 5 nF;
or
in type of protection intrinsic safety Ex ia IIC and Ex ia IIIC, only for connection to a certified
intrinsically safe circuit, with following maximum values:
Ui = 24 V; Ii = 250 mA; Pi = 1,2 W; Li = 10 µH; Ci = 5 nF.

Equipment in type of protection dust ignition protection by enclosure “t”

Transmitters with electronics insert 4 - 20 mA HART or 4 - 20 mA HART (SIL version)

Supply and output circuit (Terminals + and – or connector):

U ≤ 45 Vdc

Transmitters with electronics insert Profibus PA or Foundation Fieldbus

Supply and output circuit (Terminals 1 and 2):

U ≤ 32 Vdc

Installation instructions

The instructions provided with the product shall be followed in detail to assure safe operation.

(16) Report Number

No. NL/KEM/ExTR06.0005/05.

(17) Specific conditions of use

None.

(18) Essential Health and Safety Requirements

Covered by the standards listed at item (9).

Page 3/4

Form 227A
Version 1 (2016-04)
(13) SCHEDULE
(14) to EU-Type Examination Certificate KEMA 03ATEX1561 Issue No. 5

(19) Test documentation

As listed in Report No. NL/KEM/ExTR06.0005/05.

(20) Certificate history

Issue 1 - 202787200 initial certificate

Issue 2 - 210773200 constructional changes
Issue 3 - 211500500 constructional changes and standards
Issue 4 - 215686600 constructional changes and standards upgrade
Issue 5 - 219596300 constructional changes and standards upgrade

Page 4/4

Form 227A
Version 1 (2016-04)