Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

CN Preparatory

Download as doc, pdf, or txt
Download as doc, pdf, or txt
You are on page 1of 2

SET 1

DEPARTMENT OF ARTIFICIAL INTELLIGENCE


PREPARATORY EXAMINATION
18AIC303J – COMPUTER NETWORKS
Year/Semester & Branch: III/V & AI&DS and AIML Date:
Faculty Name: Ms.A.Nithyasri & Max. Marks: 100 Time:
Mr.K.Jeya Ganesh Kumar
PART-A Answer ALL Questions (10x2=20 Marks)
1. Suppose two computers are connected by an Ethernet hub at home. Is this a
CO1 K1
LAN, a MAN, or a WAN?
2. How many lines are required to direct connect 256 nodes in a mesh system? CO1
Identify the address class of the following IP address. CO2
3. a) 200.58.20.165
b) 128.167.23.20
4. Among packet switch and circuit switch, which is preferred for modern digital CO2
data communication?
5. Define piggy back. CO3
6. Compare unicast, multicast and broadcast. CO3
7. Describe the term “Jitter” in networks. CO4
Suppose a TCP connection is transferring a file of 5000 bytes. The first byte is CO4
8. numbered 10,001. What are the sequence numbers for each segment if data are
sent in five segments, each carrying 1000 bytes?
9. Provide the significant role played by DNS. CO5
10. Draw the handshaking involved in FTP. CO5

PART-B Answer ALL Questions (5x16=80 Marks)

i) Discuss in detail the ISO-OSI model and explain the functions of various
11. (a) layers. (12) CO1 K2
ii) Describe in detail different network topologies. (4)
(or)
i) Detail the structure of various transmission media in computer network.
11. (b) (12) CO1
ii) Also make comparison between twisted pair with coaxial cable. (4)
i) For the generator polynomial g = 110011 and the data bits (message) m =
11100011find the CRC and the transmitted string T (since g is 6 bits, i.e. a
12. (a) polynomial of degree 5, L = 5 and the CRC should be 5 bits). (10) CO2
ii) Suppose g = 1001 and the received T = 1010101, did any transmission
error occur? (6)
(or)
i) Discuss the issues While implementing the data link layer in the network.
(8)
12. (b) ii) Describe MAC sub layer protocol and frame structure of IEEE 802.11 CO2
(8)
i) Describe Circuit-switching and Packet-switching with an example. (10)
13. (a) ii) Write briefly about CSMA. (6) CO3
(or)
SET 1

i) Apply distance vector routing algorithm for the following network and
illustrate the steps in detail. (10)

13. (b) CO3

ii) Discuss the mechanism involved in IPV6 addressing. Also compare IPV4
with IPV6. (6)
i) Explain the issues in connection establishment and connection tear down
in transport layer. (6)
14. (a) ii) What is Congestion control ? Why it is more important in CO4
communication networks ? (4)
iii) Explain the packet structure of UDP. (6)
(or)
i) Explain various congestion control techniques adopted in transport layer.
(8)
14. (b) ii) Assume a network which have more number of delayed packets due to CO4
congestion there by Quality of Services decreases, Analyze the techniques to
improve the Quality of Service and describe each of its pros and cons (8)
Explain the components and architecture of DNS. Also mention the features.
15. (a) (16) CO5
(or)
Write note on the following:
i) SMTP. (4)
15 (b) ii) FTP. (4) CO5
iii) WWW architecture. (8)

Knowledge Remember (K1), Understand (K2), Apply (K3), Analysis (K4), Evaluate (K5) & Design
Level (K) (K6)

*****
Verified by Approved By

You might also like