1.

Autoclave with fully-automated process for easy & quick control Price with Taxes
Features:-
- Time for sterilization can be easily adjusted by user-friendly
control system.
- When setting time for sterilization ends up, buzzer sound comes
together
with automatic exhaust of steam inside the equipment.

- The advanced dual safety system makes optimized protection

against any
kind of dangerous factors which may be caused by excessive
upturn of
temperature & pressure.

- High-efficiency Over-Temperature Limit function fulfill reliable

protection
against overheating above a set temperature.

- User-friendly control panel enables end-users to take a look at both

setting & present temperature.

- When it comes up to a end-user’s setting temperature for

sterilization, the timer is automatically activated and both operating
temperature & progress time of sterilization temperature are shown
on the display for easy monitoring.

- The safety devices present effective protection functions against

overheating and over current.

- Easy & quick operation with the completely-isolated structure from

the
outside of the equipment.

Technical Specifications:-
Temperature: Range: Amb.+10°C to 125°C
Controller: Digital PID controller
(Program type: 5 pattern 18 segment)
Capacity: 40 ℓ
Dimensions (in) ø300 x 650mm
Display: PV & SV Dual Digital display
Timer: 99hr 59min 59sec
Pressure Gauge: 0 ~ 3 kg/cm2
Operating Pressure: 1.2 kg/cm2 at 121°C (Degrees of
Celcius)
Door packing: One Touch pressure Handle type
Safety Device: Over Temperature, Over pressure &
 Over Current protector
Basket: Standard wire Basket
Power Supply: AC 230V, 50/60Hz
Technical Documentation:
Sole agency authorization letter attested.
Country of Origin: Korea/UK/Germany/USA/Japan

2. Centrifuge Machine
Microprocessor with large LCD display
Electrical lid lock
Quick access to samples
Active imbalance identification and cut-off
Quick Acceleration and Deceleration
Noise level < 60 dBA, at max. speed
Easy removal of rotor, without tools
Manufactured in accordance to international Safety regulations, i.e.
IEC 61010
Distinct Control Panel
Control panel with Touch-Operation
Simple one –handed operation
Easy to program with gloves on
Splash-proof foil keyboard
Permanent indication of pre-set and actual values
Selection of speed in both rpm and g-force, In increments of 10
10 acceleration and deceleration rates, possibility of unbraked
deceleration
Pre- selection of the running time, from 10s to 99h 59min or
continuous
Storage of up to 99 runs
Quick –key for short runs

Technical Data
Max. Speed: 6,800 rpm
Max. RCF: 4,445xg
Max. Volume: 8x15ml
Speed range: 200-6,800 rpm
Running time 59min 50 s /10 s increments
99 h 59 min / 1 min increments
1-No. Angle Rotor Capacity 8 x 15 ml Speed 6800rpm

Technical Documentation:
Sole agency authorization letter attested.
Country of Origin: /UK/Germany/USA/Switzerland

3. Water Distillation Unit

• Water Still for single distillation, suitable for bench mounting.
 • Economical energy consumption by distillation of the heated
cooling water.
• Thermostatic low water cut-off, Manual cooling water control via
outlet temperature, • Heating element, evaporator and condenser
made
of stainless steel and housing made of galvanised sheet steel,
powder coated Conductivity at 25°C ca. 2,3 μS/cm, Production
Capacity output 4 Lit/h
Heater power 3,0 kW, Cooling water Consumption 0,7 L/min
Operated on 220 Volts,
Technical Documentation:
Sole agency authorization letter attested.
Country of Origin: Korea/UK/Germany

4. Gel Documentation & Analysis System

Automatic image analysis software Features:-
Band analysis/densitometry
Ideal for 1D analysis, the software has automatic lane and peak
detection. GeneTools software automatically compensates for
smiling or distorted bands and tracks. Molecular weight or base
pair values can be calculated using standards from one or more
tracks. Quantification can also be automatically calculated from
standards in a number of ways. Detailed results can be instantly
printed or transferred to Word or Excel.
Band matching
Band matching can be performed by position, defined Rf or
calibrated
molecular weight/base pair value.
Automatic molecular weight/base pair calculations for sample
bands based on standards from one or more lanes
GeneTools has a library of markers for automatic or manual
assignment
which are user configurable.
Multi-tier analysis for high throughput screening
Especially useful for analysing high throughput gels ,GeneTools
software provides multi-well line functions with automatic track
alignment.
Manual band quantification
The user can manually quantify bands, spots or other objects on a
sample. All data is instantly exportable to Microsoft Excel.
Spot Blot analysis
Automatic detection of spots using a spot grid, quantitative and
ncidence analysis. The software can also perform multiple
background subtraction methods.
 Colony counting
Automatic counting of two colour colonies with the ability to count
light and dark colonies on the same plate.
Export results to Microsoft Excel and Word
Customized results tables can be exported to either Microsoft Word
or Excel.
CAMERA CCD Digital camera
• 3m pixels
• USB2 connection
LENS Superior zoom lens for exceptional image quality
FILTER DRAWER Use a range of filters for extensive choice
of fluorescent applications
SAFETY SWITCH Protects from accidental UV exposure when
opening door
INTERNAL LED WHITE LIGHT For sample positioning and
focusing
Specification: -
Camera
Sensor 1/3 inch
Resolution 3 million pixels
Bit depth 12/16bit (extended)
Greyscales 4096/65536
Dynamic range 3.6/48 (extended)
Viewing area 20x20cm
Excitation Source Trans UV 302nm peak
Flat Fielding: yes
Illumination
UV transilluminator 20 x 20cm
White Epi overhead Yes
Computer & Laser Printer for above (Locally Supplied)
Technical Documentation:
Sole agency authorization letter attested.
Country of Origin: UK/Germany/USA

5. ESCO Fume Hood with built in Gas & Water Valves

Features:
Industrial grade support frame built with electro galvanized steel and
oven-baked epoxy coated aluminum.
Phenolic resin laminate baffle system ensures airflow uniformity
throughout the main chamber of the hood
Progressive Bypass Airflow System redistributes air intake when
sash is closed
Aerodynamic design eliminates air turbulence, minimizes noise
levels and static pressure losses
Grade 304 stainless steel airfoil sweeps the work surface to maintain
superior operator protection
 Manufactured In Indonesia
Specifications:
Nominal size 1.2 meters (4')
External Dimensions 1200 x 873 x 1500 mm(W x D x H)
Internal Dimensions 1120 x 682 x 1435 mm(W x D x H)
Construction
Main Body EG steel with aluminum and oven-baked
Epoxy-polyester hybrid Isocide™ powder coating
Airfoil Stainless Steel grade 304
Sash Specification
Sash Material Tempered Laminated and Framed Sash Glass
Sash Configuration Vertical
Complete unit with base storage cabinet
Technical Documentation:
Sole agency authorization letter attested.
Country of Origin: UK/Germany/USA

6. 48well Real-time PCR System

SF4800 Real-Time PCR System
Features:
 The new generation of Peltier-based technology, fast ramping
rate of up to 7℃/sec.
 Maintenance free, long life LED illuminator and high sensitivity
photoelectric detector.
 Synchronous two color detection system, reducing errors caused
by delay, shortening scan time.
 Calibration with ROX dye is not required, guarantees extremely
uniform fluorescence wells.
 The software could be upgraded free for life.
Specifications
Type: Genes & Life Science
Equipments
Brand Name: Skyfire
Model Number: sf4800+
Place of Origin: Zhejiang, China
Instrument classification: Class III
Warranty: 1 Year
After-sale Service: Free spare parts
Product name: Real-time PCR
Instrument
Language: Enlglish
Function: Disease Analysis
Display: 7 Inch TFT Touch
Screen
Reagent: Open System
 Usage: RNA
Certificate: CE ISO
Application: Hospital
Feature: Testin
Technical Documentation:
Sole agency authorization letter attested.
Country of Origin

PCR MACHINE/Thermal Cycler Gradient

7. Features:
Unique flexible programming
Rapid run times
Improved workflow over traditional gradient cyclers
Ramping rates up to 5°C/sec.
Simple user interface
Adjustable heated lid accommodates strips, tubes, and microplates
Pre-programmed standard protocols
Simplified Workflow – Improved Throughput
Sliding Adjustable Heated Lid
Easy Programming
Unique Block Design

Technical Specification:
Sample Capacity 96 x 0.2 mL tubes
Programmable Temp. Range 4°C to 99.9°C
Temperature Control Calculated or Block
Temp. Accuracy/Uniformity ±0.5°C/±0.5°C
Max. Heating Range among the 6 Peltier Blocks30°C to 99°C
Max. Temp Difference 24°C
Ramp Rates 5°C/sec. heating, 3.5°C/sec.
cooling
Optimization Technology Six 4 x 4 Peltier Blocks
with independently programmable temperatures
Programmable Lid Temperature 60°C to 65°C, 100°C to
115°C
Program Memory 200 complete programs
Temp. Increments/Decrements Yes
Time Increments/Decrements Yes
User Program Folders Yes
Password Protected Programs Yes
Communication USB and RS232 ports

Technical Documentation:
Sole agency authorization letter attested.
 Country of Origin: Korea/UK/Germany/USA

8. Rotary Evaporator Model Hei-VAP Value HL Digital

Features: -
- Reduce your process times depending on your model and
periphery up to 30%
- The chemically resistant PTFE vacuum seal reduces your
spare
parts budget up to 75% with prolonged operational lifespan.
- It can be used for 50ml – 500ml evaporating flask
(Better than Buchi).
- Increases your range of applications by using 5 liter flasks
in the universal bath at no added costs.
- Only Hei-Vap heating baths reach a temperature of 210°C
which is 30°C higher than other evaporators on the market
and allow for a broader range of applications which
previously
could not be performed on any rotary evaporator (for
example
bitumen distillation). Thus increasing the range of
applications
eliminates the need for investments in other equipment.

Technical Specification: -
Hand / Motor lift Hand lift
Rotation speed (rpm) 20 – 280
Rotation speed setting Scale
Drive Brushless DC motor with electronic speed control
Heating capacity (W) 1,300
Temp. Range heating bath (°C) 20 – 210
Temperature range accuracy (°C) ±1
Overheat protection bath (°C) Cut-off at 5°C, over set
temperature Via separate PT 1000
Bath temperature setting Digital
Heating bath temperature control Electronic /
Digital
Secondary overtemp. Cut off (°C) 250
Material heating bath (mm) Stainless steel AIS
316L
Volume heating bath (I) 4.5Liers

Technical Specification
Number of Head / Stages 2
Maximum Pumping Speed 0.75 m3h/0.9 m3h
 Ultimate Vacuum 12 mbar
Ultimate Vacuum with Gas Ballast 20 mbar
Operated on 220 Volts

Technical Documentation:
Sole agency authorization letter attested.
Country of Origin: Korea/UK/Germany/USA

9. Double Beam Spectrophotometer

Features
 Double beam stand-alone scanning UV/Vis
spectrophotometer
covering 190-1100nm
 2nm bandwidth
 Long life Xenon lamp technology for low cost of ownership
 All application software is built in - no extra modules to buy
 Colour Touch screen display with easy to use software
 USB ports for method and result storage plus connection to a
PC

Technical specification
Type UV/Vis
Wavelength Range 190 - 1100nm
Wavelength Accuracy (+/-) ± 0.5nm across wavelength range
Wavelength Reproducibility (+/-) ± 0.1nm
Lamp Source Xenon (PTR)
Beam Double Beam
Optical System Czerny-Turner Monochromator
Bandwidth 2nm
Detector Dual Solid State Silicon photodiode
Photometric Range -4.000A to 4.000A
Stray Light < 0.050%T at 220nm (NaI), < 0.050%T
at 340nm (NaNO2)
Zero Stability ± 0.001A/hr at 500nm
Baseline Flatness ± 0.002A 220 to 900nm
Measurement Type Fixed Wavelength, Abs/%T, Abs ratio, Abs
difference, concentration (standard curve), concentration (factor),
multiwavelength, kinetics, Life Science Methods, user log-on,
Equation editor
Cell Compatibility Cuvette,
Cell Holder Dual (sample and reference),
Single Cell Holder
Display Colour Touchscreen
Data Interface USB
Noise <0.002A peak to peak, 0.0008A RMS near 2A
at 500nm. <0.00020A RMS at 0A at 500nm over
 20 measurements
Photometric Accuracy± 0.002A at 0.5A, ± 0.004A at 1A, ± 0.006A
at 2A
at 440nm, 456nm, 546.1nm, 590nm, 635nm
± 0.005A using 60mg/L K2Cr2O7
Photometric Reproducibility ± 0.002A at 1A
Spectral Scanning Yes (up to 1100nm)

Complete unit with 2 Quartz & 2 Glass Cells

Technical Documentation:
Sole agency authorization letter attested.
Country of Origin: Korea/UK/Germany/USA

10. Water Bath

Basic class for standard temperature control tasks
Temperature range min. 5 °C above ambient up to +95 °C
with additional boiling mode (+100 °C)
State-of-the-art control technology of the Basic and models
Microprocessor PID-temperature controller with
integrated auto diagnostic system with fault indicator
integrated digital timer from 1 min. to 99,59 hours
Over temperature Protection (double)
Interior Stainless Steel Tank & Textured Stainless Steel Casing
Fitted With Gabled Cover
Operated on 220volts, WNB Series.
Capacity 10 Lit., interior dimension 350x210x140mm

Technical Documentation:
Sole agency authorization letter attested.
Country of Origin: Korea/UK/Germany/USA

11. Incubator
Adaptive multifunctional Digital PID-Microprocessor
controller with High-Definition TFT-Color Display
Temperature range 10°C above ambient up to +80°C
Resolution of display for set point values 0.1°C
Double doors (interior glass, exterior stainless steel)
Adjustment of pre-heated fresh air admixture
by air flap control in 10% steps,
digital timer adjustable from 1 minute to 99 days, 23 hours
adjustable electronic overtemperature monitor and mechanical
temperature limiter, protection class 1
Double Over Temperature Protection
Interior & Housing made of Stainless Steel
 Set point WAIT function - the process time does not start
until the set temperature is reached
Programme Stored in Case of Power Failure
Operated on 220volts, IN Series
Capacity 53 Lit, interior dimension: 400 x400x330mm
with Two stainless steel trays,

Technical Documentation:
Sole agency authorization letter attested.
Country of Origin: UK/Germany/USA

12 Mini Gel Electrophoresis Horizontal unit dimension

20 x 9.5 x 8.5cm (LxWxH), Silicone rubber prevents any
leakage, UV Transparent whole unit included lid to
monitor the movement of bands during Electrophoresis,
easy lid removal, Run up to 30 samples at once
complete system with UV Tray 10 x 7 cm, one Comb for
10 samples thickness 1.00 mm and one comb for 15 samples
thickness 1.00 mm with leads,

Technical Documentation:
Sole agency authorization letter attested.
Country of Origin: UK/Germany/USA

13. Vertical Gel Electrophoresis (quantity 02)

able to make and runs two gels simultaneously. Maximum gel size 8
x 11cm, gel thickness 0.75 mm, minimum buffer volume internal
250 ml, and minimum buffer volume external 500 ml, gel tank
dimension:20 x 13 x 16.5cm. Injection moulded unit, compact
design, complete unit includes Electrophoresis tank, casting module
2-set, glass plates 5-sets, 0.75mm spacer 4-Nos., 0.75 mm 10 teeth
combs 2-Nos., one gel plate, alignment cord, Glass plate separator
WITH Electrophoresis Power Supply, compact, space saving &
light weight design, touch panel, audible & visible alarm, status
alarm constant voltage or current, safety features includes, no load
detection, over voltage protection, automatic recovery after power
failure, dimension 320x240x73mm, digital voltage range 10 – 300V
in 1 Volt step, current 4–400 mA in 1mA steps 75 Watt max,
design4 parallel outputs, with timer control 0–999minute (Country
of Origin: Taiwan) Operated on 220 Volts, Country of Origin:
Technical Documentation:
Sole agency authorization letter attested.
Country of Origin:UK/Germany/USA

14. Pipette Sets

 Measuring Range 0.2 to 2µl, Accuracy ±0.014µl,
Model P2G, Gilson Made in France
Measuring Range 1 to 10µl, Accuracy ±0.040µl,
Model P10G,
Measuring Range 2 to 20µl, Accuracy ±0.060µl,
Model P20G, Gilson Made in France
Measuring Range 10 to 100µl, Accuracy ±0.15µl,
Model P100G,
Measuring Range 20 to 200µl, Accuracy ±0.30µl,
Model P200G, Gilson Made in France
Measuring Range 100 to 1000µl, Accuracy ±1.5µl,
Model P1000G

Technical Documentation:
Sole agency authorization letter attested.
Country of Origin: France

15. Orbital Shaking Incubator refrigerated front opening

noiseless with powerful induction motor, microprocessor
temperature controlled with digital display, working
temperature range: ambient +5°C to 60°C, set accuracy + 0.1 °C
shaking speed 20 – 300 rpm, Interior : Stainless Steel (SUS304)
shaking orbit 20mm, shaking setting & display digital,
shaking timer 99hr and 59 minute, temperature setting &
display digital, PID temperature controlled,
interior chamber dimension 545 x 550 x 360mm,
capacity to hold different flasks i.e. 250ml 23-Nos
or 500ml 16-Nos or 1000ml 9-Nos, (Country of Origin: Korea)
Safety: over temperature cut-off, over current breaker
Complete unit, operated on 220 Volts.
Technical Documentation:
Sole agency authorization letter attested.

Technical Documentation:
Sole agency authorization letter attested.
Country of Origin: Korea/UK/Germany/USA

16. Microscope Trinocular Research Antimould Treated Stand

45 degree Binocular observation tube, quadruple Fixed
revolving nose piece Plan objectives 4X,
10X, 40X spring and 100X spring oil immersion, Plan
Objectives extend clarity to the edge of the image, moveable
Abbe Condenser with focusing control with aperture iris
Diaphragm for critical focus coarse and fine focusing,
tension adjustment, with built in low drive, mechanical stage
 with smooth moving coaxial controls, wide field eye piece
10X paired complete unit with standard accessories, built in
variable Light Source Halogen Light 6Volt 20W,
operated on 220 Volts,
With Microscope Digital Camera
HDMI C-mount camera
6MP Still resolution 3264x1836
2MP Live video 1920x1080 60 fps (frames per second) via HDMI
2MP Live video 1920x1080 30 fps (frames per second) via USB2.0
Video record: 1080p 30fps (frames per second) on SD card or PC
Output: HDMI, USB 2.0, SD Card
1/3" CMOS chip (use .3x C-mount adapter)
Button (1) controls: Exposure, White balance, Gamma, Gain,
Sharpness, Saturation, Contrast
Button (2) controls: Cross line, Image Compare, Image Freeze
OS support: Windows XP and later
Software: ISCapture full parameter control
C-mount Adaptor
Compatible Computer with 32” LED 32inches
.

Technical Documentation:
Sole agency authorization letter attested.
Country of Origin: Korea/UK/Germany/USA

17. E-Blotter complete system

E-Blotter Electrode Module, Module includes black & red
Electrode plate in cassette holder, blotter cassette/2-sets,
blotting sponge/1pkg, blotting paper 1 pkg, transfer gel
capacity 1or 2 gels, buffer requirement 1450ml complete unit
Technical Documentation:
Sole agency authorization letter attested.
Country of Origin: Korea/UK/Germany/USA

18. Automatic Fraction Collector For Protein Purification

specifications
Collection tube : 160 or more
maximum capacity: 5ml or more
protein measurement using UV 280nm
collection mode: volume and time both
Timing collection range: 1 second to 24 hours
Dimension: at least 260mm*370mm*300mm
Tubing compatible with chromatographic purification
warranty: 1 year
Certificate: CE ISO
Technical Documentation:
 Sole agency authorization letter attested.
Country of Origin: Korea/UK/Germany/USA

19. PERISTALTIC PUMP for protein purification

Specifications
Pressure: 2.7bar
Voltage: 110V/220V
Speed: 1-600RPM
Flow range: 0-6000mL/min
Function: Speed Adjustable
IP rate: IP31
Intelligent temperature control: Cooling fun intelligent temperature
control system, reduce noise
Warranty: 1 Year Warranty

Technical Documentation:
Sole agency authorization letter attested.
Country of Origin: Korea/UK/Germany/USA