Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 10 views

    Beam 52

    Uploaded by

    michael
    This document provides details of the reinforcement design for Beam 7 at Storey 1. The beam has dimensions of 300mm width and 600mm height. The top edge reinforcement requires 755.39mm2 and 708.12mm2 of steel in two locations along the beam. The bottom edge requires 2.59mm2, 668.87mm2, and 12.31mm2 of steel in three locations. Shear links of 1T8-200mm are specified at both supports. Deflection and steel area checks are also provided.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Beam 52

    Uploaded by

    michael
    10 views2 pages
    This document provides details of the reinforcement design for Beam 7 at Storey 1. The beam has dimensions of 300mm width and 600mm height. The top edge reinforcement requires 755.39mm2 and 708.12mm2 of steel in two locations along the beam. The bottom edge requires 2.59mm2, 668.87mm2, and 12.31mm2 of steel in three locations. Shear links of 1T8-200mm are specified at both supports. Deflection and steel area checks are also provided.

    Original Title

    BEAM 52

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides details of the reinforcement design for Beam 7 at Storey 1. The beam has dimensions of 300mm width and 600mm height. The top edge reinforcement requires 755.39mm2 and 708.12mm2 of steel in two locations along the beam. The bottom edge requires 2.59mm2, 668.87mm2, and 12.31mm2 of steel in three locations. Shear links of 1T8-200mm are specified at both supports. Deflection and steel area checks are also provided.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    10 views2 pages

    Beam 52

    Uploaded by

    michael
    This document provides details of the reinforcement design for Beam 7 at Storey 1. The beam has dimensions of 300mm width and 600mm height. The top edge reinforcement requires 755.39mm2 and 708.12mm2 of steel in two locations along the beam. The bottom edge requires 2.59mm2, 668.87mm2, and 12.31mm2 of steel in three locations. Shear links of 1T8-200mm are specified at both supports. Deflection and steel area checks are also provided.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    You are on page 1of 2

    JRDVQDEYJBHRX5CV (Fenerbahce_Do Not Use COMMERCIAL)

    Beam Reinforcement Design Calc. By:


    Rev: 1 Checked By:

    Beam Reinforcement Design


    Axis: 7 Storey: 1
    Materials: C30 / Grade 460 (Type 2) (Links: Grade 460 (Type 2)) Concrete Cover: 25.0 mm

    Diagrams

    Bending
    7B/A-G L= 5875mm
    Bw x H (mm) 300 x 600
    Flange Bf x Hf
    (Left) ---
    (Right)
    Top Edge
    M (kN.m) 154.8 0.0 145.9
    d (mm) 557.0 557.0 557.0
    K/K' 0.43 0.00 0.40
    x (mm) 99.5 61.9 93.3
    As (mm2) 755.39 0.00 708.12
    As' (mm2) 0.00 0.00 0.00
    As,min (mm2) 265.68 265.68 265.68
    Bottom Edge
    M (kN.m) 0.5 138.4 2.6
    d (mm) 557.0 557.0 557.0
    K/K' 0.00 0.38 0.01
    x (mm) 61.9 88.1 61.9
    As (mm2) 2.59 668.87 12.31
    As' (mm2) 0.00 0.00 0.00
    As,min (mm2) 265.68 265.68 265.68

    Shear And Torsion Design


    Vd (kN) 145.5 139.9
    v (MPa) 0.87 0.84
    vc (MPa) 0.48 0.48
    vMax (MPa) 4.00 4.00
    Vnom (kN) 160.0
    Td (kN.m) 0.8
    vt (MPa) 0.00
    vt,min (MPa) 0.00
    bsupport (mm) 0.0 0.0
    Links 1T8-200 1T8-200 1T8-200

    Deflection Check
    10.55 ≤
    L/d
    33.71 √

    Steel Areas (mm2)


    Required

    ProtaStructure v5.1.252 Page 1


    JRDVQDEYJBHRX5CV (Fenerbahce_Do Not Use COMMERCIAL)
    Beam Reinforcement Design Calc. By:
    Rev: 1 Checked By:

    Top Edge 555.39 0.00 508.12


    Bottom Edge 2.59 603.19 12.31
    Supplied
    Top Edge 603.19 603.19 603.19
    Bottom Edge 603.19 603.19 603.19
    Steel Bars
    Top Bars 3T16
    Top.Sup.Bars
    Top.Sup.Bars
    Bottom Bars 3T16
    Bottom Bars
    Bot.Sup.Bars
    Side Bars

    ProtaStructure v5.1.252 Page 2

    You might also like