AT8050

ATCA NODE BLADE - TWO FEATURE-RICH PROCESSOR OPTIONS:

SINGLE Intel® Xeon® Six-Core 5600 SERIES/Quad-Core 5500 SERIES

 optimized for virtualization

 8 threads (5500) to 12 threads (5600)
 support for up to 48 GByte on 3-channels, DDR3 1066 MHz, ECC,
registered SDRAM on 6 DIMM sockets total
 1 X Mid-size AdvancedMC bay
 Dual 10 Gigabit on Fabric (PICMG 3.1, Option 9)
 AT8050
ADVANCEDTCA / ADVANCEDMC OPEN MODULAR SOLUTIONS

The Kontron AT8050 AdvancedTCA processor board redefines the mance of the Kontron AT8050 will handle even the most demand-
design possibilities with a new Intel® microarchitecture processor, ing storage, medical imaging, security, and communications infra-
which offers greater efficiency and performance. The AT8050 is a structure applications. With the available AdvancedMC bay,
single-socket design with two feature-rich processor options: an wireless/telecom equipment manufacturers can add multiple
Intel Xeon Quad-Core 5500 (45 nm) processor; or an Intel Xeon Six- functionality with an assortment of Kontron AMC modules such as
Core 5600 (32 nm) processor. Both feature an Integrated Memory the Kontron AM42xx series of Intelligent packet processor AMC
Controller, Turbo Boost Technology, Intel® QuickPath interconnect, modules, designed with the OCTEON Plus 5650 Network Service
and Intel® Hyper-Threading Technology (SMT). The overall perfor- MIPS Processor from Cavium Networks.


TECHNICAL INFORMATION

PROCESSOR Single Intel® Xeon® Six-Core 5600 (12 MByte Cache) Processor
Single Intel® Xeon® Quad-Core 5500 (8 MByte Cache) Processor
Passive heatsink
Virtualization Technology supported
CHIPSET Intel® 5520 I/O Hub (36D) and I/O Controller Hub (ICH10R)
BUS INTERFACE CPU QuickPath Interconnect delivering up to 5.86 GT/s/lane
PCIe
EXPANSION SLOTS 1 Mid-size AdvancedMC bay
x4 PCI Express
2x1000Base-BX Ports common option, 4x1000Base-BX in fat pipe
Dual port SAS/SATA
SYSTEM MEMORY Up to 48 GByte on 6 latching sockets of VLP DDR-3 1066 MHz RDIMM SDRAM
ECC and S4EC/D4ED support
3 DDR-3 channels; 2 DIMM per channel
FLASH MEMORY Two redundant flash BIOS (Field software upgradeable)
Roll back functionality controlled by IPMC
STORAGE 4 ports SAS/SATA available using RTM with the LSISAS1064e
USB SSD Flash daughter board (4 GByte minimum with many available sizes)
iSCSI via 82599 fabric interface; SATA AMC with ICH10 controller
I/O Front Panel: Serial (RJ-45), 2 i82576 Management LAN (RJ-45), 2 USB
PCIe Gen2 (5 Gb/s) in Update Channel (AMC Carrier ATCA blade)
Intel i82599 10 Gb/s or 1 Gb/s Ethernet Controller to Fabric Interface
Two Intel i82576EB 1 Gb/s to the Base Interface
Synchronisation Clocks Interface support
RELIABILITY MTBF: > 105 000 hours @ 40° C/104° F (Telcordia SR-332, issue 2); no hard-disk
SAFETY / EMC Safety: CB report to IEC 60950-1: 2005, CE Mark to EN 60950-1:2006, meets or exceeds UL/CSA 60950-1;
EMC: FCC Part 15, Class B; CE Mark to EN 300 386, EN 55022 and EN 55024; meets GR-1089 (NEBS)
BOARD SPECIFICATIONS PICMG 3.0R3 / 3.1 Option 9, Option 2
PICMG AMC.0R2 / AMC.1 Type 4/ AMC.2 Type E2 & Type 4 compliant/ AMC.3
PICMG HPM.1; IPMI 2.0
TARGET CERTIFICATIONS NEBS Level 3 (designed for); CP-TA TPM 1.1
RTM Hot Swap SAS/SATA Hard Disk; 2x USB, 2x SFP, SAS controller; PCI Express Hot Plug;
Serial RJ-45; and external SAS
connector

// 2 www.kontron.com

TECHNICAL INFORMATION

BIOS AMI BIOS

Warm reset support with memory protection for post-mortem analysis
Save CMOS in non-volatile memory option
Boot from Ethernet PXE (Base and Fabric interfaces and management Lan)
Boot from Ethernet iSCSI (Base and Fabric interfaces)
Boot from SAS; and boot from USB 2.0 (Floppy, CD-ROM, Hard Disk)
Diskless, Keyboard less, and battery less operation extensions
System and LAN BIOS shadowing
Robust BIOS flash Update with rollover capability (HPM.1); Fail safe field
updateable BIOS
Advanced Configuration and Power Interface (ACPI 1.0, 2.0 & 3.0)
Console redirection to serial port (VT100)with CMOS setup access, and SOL
(Serial over LAN)
Event (correctable/uncorrectable ECC, POST errors); log support to IPMC
OS COMPATIBILITY Red Hat Enterprise Linux V.5.4, Wind River PNE Linux 2.0
IPMI FEATURES Management Controller compliant IPMI v2.0 and design to meet CP-TA TPM v1.1.
Remote control capability (power on-off /clean shutdown/warm reset/cold
reset) via any IPMI
channels including LAN when the payload power is off
Full speed 115200 bps Serial Over LAN (+LAN access to BIOS menu setup) and
IPMI Over LAN (IPMI v2.0) always available
Serial data caching and replay to ease software application troubleshooting
and post mortem analysis
BIOS Post Code error sent to shelf manager System Event Logging
Configurable automatic “clean ACPI shutdown” policy on disk storage
deactivation (AMC or RTM)
Full standard PCIe Hot Plug operation embedded with PICMG AMC/RTM
activation

Copyright © 2015 Kontron AG. All rights reserved. All data is for information purposes only and not guaranteed for legal purposes. Information has been carefully checked and is believed to be accurate;
however, no responsibility is assumed for inaccuracies. Kontron and the Kontron logo and all other trademarks or registered trademarks are the property of their respective owners and are recognized.
Robust IPMI firmware Update with rollover capability, without any payload
impact (HPM.1)
Override configuration for activation of the board/AMC/RTM without Shelf
Manager Intervention
SUPERVISORY Supports a system management interface (KCS interrupt driven) via an IPMI
V2.0 compliant controller
Standard IPMI Watchdog for all CPU running phase (BIOS execution / OS
loading and running)
IPMI Hardware system monitor (power/voltages), memory and all critical
components temperature is monitored
Extensive sensors monitoring (around 100 IPMI sensors) and event
generation base on thresholds and discrete reading
WARRANTY Two years limited warranty
POWER REQUIREMENTS Intel Xeon 5500: 120 W* -38 V @ -72 V with 12 GByte of memory, no RTM &
no AMC. Max of 225 W
* The power consumption will vary depending on your product configuration
(AMC, RTM & extra memory)
ENVIRONMENTAL Operating Storage and Transit
TEMPERATURE* 0° C to 55° C / 32 to 131° F -40° C to 70° C / -10 to 158° F
HUMIDITY* 5 % to 93 % @40° C / 104° F 5 % to 95 % @40° C / 104° F
non-condensing non-condensing
SHOCK* 4 000 m / 13,123 ft 15 000 m / 49,212 ft
VIBRATION* 5-200 Hz. 0.2 G, each axis 5 Hz to 20 Hz @ 1 m2/s3
(0.01 g2 /Hz) (flat) 20 Hz to 200
Hz @ -3 dB/oct (slope down)
AIRFLOW Chassis CP-TA Class B.4
* Designed to meet or exceed.

Specifications are subject to change without notice. AT8050-20151208 - WMH



CORPORATE OFFICES EUROPE, MIDDLE EAST NORTH AMERICA ASIA PACIFIC

& AFRICA

Lise-Meitner-Str. 3-5 14118 Stowe Drive 1~2F, 10 Building, No. 8 Liangshuihe 2nd Street,
86156 Augsburg Poway, CA 92064-7147 Economical & Technological Development Zone,
Germany USA Beijing, 100176, P.R.China
Tel.: + 49 821 4086 0 Tel.: + 1 888 294 4558 Tel.: +86 10 63751188
Fax: + 49 821 4086 111 Fax: + 1 858 677 0898 Fax: +86 10 83682438
info@kontron.com info@us.kontron.com info@kontron.cn

// 3 www.kontron.com