ATCA-7365

AdvancedTCA Processor Blade

PRELIMINARY DATA SHEET

The ATCA-7365 processor blade is an ideal solution for communications equipment requiring powerful server class processing performance, flexible mass storage and network options
n High performance Intel Architecture processor blade n Two, 6-core Intel Xeon processors L5638 (2.0 GHz) n Up to 80GB main memory n Hot-swappable hard disk with flexible choice of storage options n RAID 0/1 support n Multiple network and storage I/O connectivity n Option 9 (1/10GbE) ATCA fabric interface n Designed for NEBS and ETSI compliance n Multiple software packages including operating systems

The Emerson Network Power ATCA-7365 is an Intel Architecture server blade that delivers a combination of performance and flexibility to help drive the successful implementation of next-generation telecom networks and communication infrastructures. It builds on the AdvancedTCA (ATCA) standard to provide the right product at the right time to meet the needs of communication industries. With two 6-core Intel Xeon processors L5638, the ATCA-7365 processor blade enables best-in-class compute performance in an ATCA form factor. The PICMG 3.1 compliant fabric interface provides 10 Gigabit Ethernet (10Gbps) capability for applications requiring higher network throughput in the backplane. Multiple network and storage I/O interfaces allow the integration into different network infrastructures such as telecommunication central offices and network data centers. Main memory configuration and mass storage options can be flexibly configured providing a perfect fit to the applications needs. RAID 0 and 1 can be enabled when connecting to external disks or between two sets of ATCA-7365 blades, building a storage cluster capable of high availability operation.

ATCA-7365 Block Diagram

5 DDR3 VLP DIMM Slots

DDR3-1066 DDR3-1066 DDR3-1066

5 DDR3 VLP DIMM Slots

6-Core Intel Xeon Processor 5600 Series

QPI 5.86 GT/s

QPI 5.86 GT/s

DDR3-1066

6-Core Intel Xeon Processor 5600 Series

RTM-ATCA-7360
Management, Control, Power 1x USB

DDR3-1066 DDR3-S1066

QPI 5.86 GT/s

USB, IPMC, Control, Power PCI Express x4 PCI Express x4 Zone 3 to RTM (P30, P31, P32) Intel 82576 Dual 1GbE

1000 Base-T

Intel 5520 Chipset I/O Hub

PCI Express x4 PCI Express x4 PCI Express x4

Intel 82576 Dual 1GbE

1000 Base-T

ESI 1000 Base-T GbE

SAS/SATA (Update Channel) Intel 82572 GbE GbE (Update)

Intel 82576 Dual 1GbE

1000 Base-T

2x USB

USB 2.0

Intel I/O Controller Hub ICH10R

SATA USB Flash Disk

PCI Express x4

VGA (opt.)

VGA Module (opt.)

PCIe

SPI

Emb. SSD LPC

PCI Express x8

Intel 82599 Dual 10GbE

1 & 10 GbE (Fabric)

Zone 2 to Backplane (P20, P23)

LSISAS 1064E SAS Cntr.

SAS Con.

Flash 1 Serial Console COM FPGA Flash 2

PCI Express x4

Intel 82576 Dual 1GbE

GbE (Base)

On-board Power Supplies and Hot Swap Circuitry IPMC IPMB-A IPMB-B

-48V -48V Zone 1 to Backplane (P10)

Hot-swappable HDD 2.5FF

Standard Networking Support

The ATCA-7365 processor blade provides PICMG 3.0 base interface connectivity in a dual star configuration using standard Gigabit Ethernet (GbE) technology. The PICMG 3.1 fabric interface features both dual 10Gbps (Option 9) and dual 1Gbps (Option 1) Ethernet capability. A further 1Gbps Ethernet backplane connection is available on the ATCA update channel. External network connectivity includes 10/100/1000Base-T Ethernet via RJ-45 connector on the blade faceplate. Several rear transition module (RTM) configurations support up to six additional 10/100/1000Base-T connections.

Processor Complex
Both Intel Xeon processors L5638 are connected together via QPI busses to share memory resources. The processors can access the entire I/O subsystem via the Intel 5520 chipset I/O hub. The I/O subsystem consists of: Intel I/O Controller Hub ICH10R Intel 82572 Gigabit Ethernet controller Intel 82576 dual Gigabit Ethernet controllers Intel 82599 dual 10 Gigabit Ethernet controller LSI Logic LSISAS1064E SAS controller Emulex 4Gbps Fibre Channel controller

Software Support
The ATCA-7365 blade can be configured with a variety of software offerings, from firmware-only to fully integrated and verified software operating environments. FIRMWARE Firmware-only blade-level support is offered for customers taking on the integration and verification responsibilities. It provides all the boot and IPMC firmware required for an ATCA blade. The BIOS firmware includes support for: Unified Extensible Firmware Interface (UEFI) Power management support, ACPI 3.0b Multiple boot options including:
c c c c c

To better exploit the CPU and I/O resources of the blade, RHEL 5.4 supports CPU and I/O virtualization using XEN/KVM. In addition RHEL 5.4 provides code for enabling the processor power management to help enhancing energy efficiency of the blade. Emerson ATCA blades can be configured with optional software that includes Basic Blade Services. When integrated in one of the Emerson ATCA Centellis platforms, the ATCA-7365 comes complete with, and is verified with, Wind River PNE 3.0. This distribution comes with all Linux Support Packages (LSPs) to support Emerson ATCA blades as well as user applications. Basic Blades Services (BBS) software is provided to enable a set of ATCA hardware and software components into a fully integrated and verified telecom platform the Centellis platform. This platform is ready for customers HA middleware and application environment. Basic Blade Services include: Hardware Platform Management including local IPMC, LED, E-Keying and blade extraction software Firmware upgrade utility Local management access (CLI) RELEVANT STANDARDS Linux Foundation Service Availability Forum (SA Forum)
c

Local and external hard disks On-board flash disk External USB boot media PXE boot via ATCA base interface iSCSI boot via ATCA base interface

RAID 0/1 support via LSI SAS BIOS extension Serial redirection of the BIOS console Serial over LAN of the BIOS console via ATCA base interface BIOS upgrade via local host INTELLIGENT PLATFORM MANAGEMENT CONTROL The ATCA-7365 features an intelligent platform management controller (IPMC). The IPMC is a management subsystem providing monitoring, event logging, and recovery control. The IPMC serves as the gateway for management applications to access the platform hardware. Features include: Compliance with PICMG 3.0 and IPMI 1.5 Rollback capability if IPMC image upgrade failed Firmware (BIOS, IPMC, FPGA) upgradable from IPMI interface (IPMB) and/or locally, PICMG HPM.1 support or via Basic Blade Services (BBS) firmware upgrade utility Support for serial port redirection over LAN interface (IPMI 2.0 compliant) SUPPORTED OPERATING SYSTEMS Red Hat RHEL 5.4 certified Wind River PNE LE 3.0 Prepared for Microsoft Windows Server 2008 Prepared for VMware ESX/ESXi (requires VGA module)

Hardware Platform Interface (HPI) HPI-B.02

Please check with your local sales contact for availability of supported Centellis platforms.

Rear Transition Modules

Several RTM variants, already introduced with the ATCA-7360 blades, are available to support different I/O configurations at the RTM faceplate. RTM-ATCA-7360 includes: One (1) USB 2.0 interface Six (6) Gigabit Ethernet interfaces, 10/100/1000Base-T, RJ-45 connector Two (2) SAS interfaces, SFF-8470 connector Disk bay for one (1) hot-swappable hard disk, 2.5 RTM-ATCA-7360-L includes: One (1) USB 2.0 interface Two (2) Gigabit Ethernet interfaces, 10/100/1000Base-T, RJ-45 connector Two (2) SAS interfaces, SFF-8470 connector Disk bay for one (1) hot-swappable hard disk, 2.5 3

RTM-ATCA-7360-FC supports: One (1) USB 2.0 interface Six (6) Gigabit Ethernet interfaces, 10/100/1000Base-T, RJ-45 connector Two (2) SAS interfaces, SFF-8470 connector Two (2) Fibre Channel interfaces, up to 4Gbps, prepared for SFP modules

COUNTERS /TIMERS Real-time clock Programmable watchdog timer EXTERNAL INTERFACES Front panel
c c

10/100/1000Base-T Ethernet (1), RJ-45 Serial console (1), RJ-45 USB 2.0 (2) Optional VGA interface (on request) USB 2.0 (1) Gigabit Ethernet interfaces (2 or 6), optional, RJ-45 SAS interfaces (2), SFF-8470 1/2/4Gbps Fibre Channel interfaces (2), optional, prepared for SFP modules

Hardware
PROCESSOR Two 6-core Intel Xeon L5638 (2.0 GHz) processors QuickPath Interface (QPI) 5.86 GT/s 12MB L3 cache (per processor) 64-bit mode extension (EM64T) SMP support MEMORY DDR3-1066 memory controllers integrated into processors Total of six independent memory channels From 2 to 80GB memory configurations supported 4MB primary firmware flash, 4MB redundant flash for failsafe operation Reset persistent memory, 16MB SRAM, 64MB flash (optional)* On-board solid state disk at SATA, 32GB or 64GB (optional)* MASS STORAGE Embedded USB flash disk, 4GB (higher capacity upon request) Hot-swappable hard disk on RTM Hard disk drive options including
c c

c c

Rear transition module

c c

c c

POWER REQUIREMENTS Dual-redundant 48 to -60 VDC (TNV-2) rail Input range: 39 72 VDC Power consumption including RTM
c c

Typical: 180 - 220 W Maximum: 260 W

THERMAL CHARACTERISTICS Operating range: 5 C to 55 C Airflow requirements according to CP-TA B.4 (B.3 with specific configurations) RELEVANT BLADE SIZE 8U form factor, 280 mm X 322.5 mm, single slot RELEVANT STANDARDS PICMG 3.0 (form factor, IPMI, base interface, hot swap, RTM) PICMG 3.1, Option 1, 9

Enterprise class disks (various capacity options) 80GB SATA disk with extended temperature range

BASE AND FABRIC INTERFACES Dual star configuration PICMG 3.0 base interface compliant, Gigabit Ethernet (1.0Gbps) PICMG 3.1 fabric interface compliant
c

PICMG 3.1, Option 1 Single, redundant Gigabit Ethernet pair (1.0Gbps) PICMG 3.1, Option 9 Single, redundant 10 Gigabit Ethernet pair (10Gbps)

PICMG 3.0 Update Channel Gigabit Ethernet (1.0Gbps) 4 *Persistent memory and solid state disk mutually exclusive

Ordering Information
Part Number ATCA-7365-24GB ATCA-7365-48GB ATCA-7365-0GB ATCA-7360-MEM-2G ATCA-7360-MEM-4G ATCA-7360-MEM-8G RTM-ATCA-7360 RTM-ATCA-7360-L ATCA7360-HDD1-SAS ATCA7360-HDD2-SAS ATCA7360-HDD3-SATA RTM-ATCA-7360-FC ATCA7360-MMOD-SATA1 ATCA7360-MMOD-SATA2 ATCA7360-SFMMOD RJ45-DSUB-ATCA7140 SA-BBS-WR30-7360 Description ATCA processor blade, dual L5638 6-core (2.0 GHz), 6X 4GB, 10G support ATCA processor blade, dual L5638 6-core (2.0 GHz), 6X 8GB, 10G support ATCA processor blade, dual L5638 6-core (2.0 GHz), 0GB, 10G support. See Note 1 2GB DDR3 VLP memory module for ATCA-736X product series 4GB DDR3 VLP memory module for ATCA-736X product series 8GB DDR3 VLP memory module for ATCA-736X product series RTM for the ATCA-736X product series, 6X GbE, 2X SAS,1X slot for optional HDD RTM for the ATCA-736X product series, 2X GbE, 2X SAS, 1X slot for optional HDD 147GB SAS HDD for the RTM-ATCA-7360. See Note 2 300GB SAS HDD for the RTM-ATCA-7360. See Note 2 80GB SATA HDD (ext. temp.) for the RTM-ATCA-7360. See Note 2 RTM for the ATCA-736X product series, 6X GBE, 2X SAS, 2X FC. See Note 3 32GB on-board solid state disk at SATA for ATCA-736X product series. See Note 4 64GB on-board solid state disk at SATA for ATCA-736X product series. See Note 4 Reset persistent memory, 16MB SRAM, 64MB flash for the ATCA-736X product series. See Note 4 RJ-45 DSUB cable for the ATCA-7140, 7150, 7350, 736X CD - BBS SW and WR PNE 3.0 for ATCA-7360 and ATCA-7365

Note 1: No memory installed Note 2: HDD kit option for RTM-ATCA-7360 and RTM-ATCA-7360-L Note 3: RoHS 5/6 (lead exemption) Note 4: Persistent memory and solid state disk mutually exclusive

Regulatory Compliance
Item Designed to comply with NEBS, Level 3 Designed to comply with ETSI Description Telcordia GR-63-CORE, NEBS Physical Protection Telcordia GR-1089-CORE, Electromagnetic Compatibility and Electrical Safety Generic Criteria for Network Telecommunications Equipment. Equipment Type 2 ETSI Storage, EN 300 019-1-1, Class 1.2 equipment, Not Temperature Controlled Storage Locations ETSI Transportation, EN 300 019-1-2, Class 2.3 equipment, Public Transportation ETSI Operation, EN 300 019-1-3, Class 3.2 equipment, Partly Temperature Controlled Locations ETSI EN 300 132-2 Environmental Engineering (EE); Power supply interface at the input to telecommunications equipment; Part 2: Operated by direct current (dc) ETSI ETS 300 753, Equipment Engineering (EE); Acoustic noise emitted by telecommunications equipment CE Conformity EMC Directive 2004/108/EC, Directive 2006/95/EC ETSI EN 300 386 Electromagnetic compatibility and Radio spectrum Matters (ERM); telecommunication network equipment; ElectroMagnetic Compatibility (EMC) requirements, Telecommunication equipment room (attended) CFR 47 FCC Part 15 Subpart B, Class A (US); FCC Part 15 - Radio Frequency Devices; Subpart B: Unintentional Radiators EMC Directive 2004/108/EC (EU) AS/NZS 3548 (Australia/New Zealand), Limits and Methods of Measurement of Radio Disturbance Characteristics of Information Technology Equipment VCCI Class A (Japan), Voluntary Control Council for Interference by Information Technology Equipment CISPR 22 Information technology equipment Radio disturbance characteristics Limits and methods of measurement CISPR 24 Information technology equipment Immunity characteristics Limits and methods of measurement Safety Certified to UL/CSA 60950-1, EN 60950-1 and IEC 60950-1 CB Scheme Safety of information technology equipment, including electrical business equipment DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS) DIRECTIVE 2002/96/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL on waste electrical and electronic equipment (WEEE) Designed to operate within a CP-TA B.4 system environment at full performance

RoHS/WEEE compliance

Interoperability

SOLUTION SERVICES
Emerson Network Power provides a portfolio of solution services optimized to meet your needs throughout the product lifecycle. Design services help speed time-to-market. Deployment services include global 24x7 technical support. Renewal services enable product longevity and technology refresh.
Intel and Xeon are trademarks of Intel Corporation or its subsidiaries in the Unites States and other countries. Microsoft and Windows are registered trademarks of Microsoft Corporation. All other product or service names are the property of their respective owners. This document identifies products, their specifications, and their characteristics, which may be suitable for certain applications. It does not constitute an offer to sell or a commitment of present or future availability, and should not be relied upon to state the terms and conditions, including warranties and disclaimers thereof, on which Emerson Network Power may sell products. A prospective buyer should exercise its own independent judgment to confirm the suitability of the products for particular applications. Emerson Network Power reserves the right to make changes, without notice, to any products or information herein which will, in its sole discretion, improve reliability, function, or design. Emerson Network Power does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent or other intellectual property rights or under others. This disclaimer extends to any prospective buyer, and it includes Emerson Network Powers licensee, licensees transferees, and licensees customers and users. Availability of some of the products and services described herein may be restricted in some locations.

Emerson Network Power. ATCA7150-D2 11/07 The global leader in enabling Business-Critical Continuity.
Emerson Network Power

AC Power Connectivity DC Power Embedded Computing

Embedded Power Infrastructure Management & Monitoring Outside Plant Power Switching & Controls

Precision Cooling Racks & Integrated Cabinets Services Surge Protection

Emerson, Business-Critical Continuity and Emerson Network Power are trademarks of Emerson Electric Co. or one of its affiliated companies. 2010 Emerson Electric Co. ATCA7365-D0 02/10

Offices: Tempe, AZ U.S.A. 1 800 759 1107 or +1 602 438 5720 Paris, France +33 1 60 92 31 20 Munich, Germany +49 89 9608 2333 Tel Aviv, Israel +972 9 9560361 Hong Kong +852 2176 3540 Shanghai, China +86 21 3395 0289 Tokyo, Japan +81 3 5403 2730 Seoul, Korea +82 2 3483 1500

EmersonNetworkPower.com/EmbeddedComputing