Globe Control Valve

Series 11
 GLOBE CONTROL VALVE
SERIES 11

Foreword
Globe Control Valves are versatile go to product for flow control applications and it offers precise flow regulation,
apart from offering solutions for high pressure drop, cavitation, noise and flashing. Variety of Trim options and
Characteristics is unique to Globe control valves. With optional bonnets, seals and trim combination Globe valves
can be used for wide range of temperatures.

FCC offer standard as well as bespoke products.

CFD reports and flow testing may be offered when requested by customers.

Valve Model Numbering

Series Rating Trim Type Temperature
11 4 - 900 10 – Contour unbalanced 1 - Warm Service

5 - 1500 20 – Micro Spline 2 - High Temperature

6 - 2500 30 – Cage, Unbalanced* 3 - Ultra High Temperature

X - Special 40 – Cage, Balanced* 4 - Cryogenic

50 – Stack Trims

X1 – Tungsten carbide Trims

X2 – Ceramic Trims

*Ported Cage ,MHC, Anti-cavitation and Low Noise Trims

FCC/11/22-23, Issue 1 Page 2 of 15

 GLOBE CONTROL VALVE
SERIES 11

Engineering Data
Table 1.1 Engineering Data

Body Style Globe Straight, Globe Angle

Design Standard ASME B16.34

Sizes, Pressure rating 1” to 12”, ASME Class 900-1500

1” to 8”, ASME Class 2500

Trim Type Micro Spline

Contoured
Multi Hole Cage (MHC)
Low Noise Trim
Anti-cavitation Trim
Stack Trims

Trim Characteristics Equal Percentage

Linear
Modified Equal Percentage

Flow Co-efficient Refer Table 6.1 to 6.5, Consult factory for customized Cv / Trim Characteristics.

Guiding Cage Guided

Seat Leakage As per ANSI / FCI 70.2 / IEC 60534-4

Standard: Class IV
Optional: Class V & VI

Flow Direction Unbalanced Trims: Flow Under

Microspline, Contoured, MHC

Balanced Trims:
Ported cage :Flow Over
MHC: Flow Over is standard; Flow Under when used for low noise service

Anti-cavitation trim: Flow Over

Low noise trim: Flow Under

Bonnet Design Standard (-29° to 232°C),

Extension (-46° to 427°C)
Cryogenic (-46°C to -196°C)

NACE Conformance NACE conformance shall be offered for Body, Bonnet & Bolting material when requested

Trim Balancing Unbalanced 1” to 2”

Balanced 1” to 12”

End Connection Styles Standard

Flanged RTJ as per ASME B16.5

Optional
Butt welding ends as per ASME B 16.25,
Socket Welding as per ASME B16.11 (0.5” to 2”)

Face To Face Globe Straight: ISA 75.08.06 (Up to 12”) & B16.10, FCC standard for Globe Angle
For RTJ the “X” factor from B16.10 should be added with ISA

FCC/11/22-23, Issue 1 Page 3 of 15

 GLOBE CONTROL VALVE
SERIES 11

Parts List

Fig 1: Globe Valve

Soft Seat and Balance Seal

Soft Seat
Soft Seal is recommended for applications where tight shut
off is required with minimal actuator force for temperature less
than 232°C.

Fig 2: Soft Seal

Balance Seal
A balance seal is used to arrest the leakage through the
clearance between plug and cage.

Fig 3: Balance Seal

FCC/11/22-23, Issue 1 Page 4 of 15

 GLOBE CONTROL VALVE
SERIES 11

Trim Design

Micro Spline
Micro splined trims are suitable for very low Cv applications that
require precise control. The plug and seat are manufactured as a
matched pair. Flow under is preferred.

Fig 4: Microspline

Contoured
Contoured plug with post guiding enables perfect alignment of
the trim components. The trim offers wide range of Cv and
characteristics. This design is suitable for viscous, dirty fluid
and non-lubricating process.

Fig 5: Contoured

Ported Cage
Ported Cages offer massive guiding and high flow capacity
even with shorter travels. These Trims are suitable for low
pressure drop general service applications. Ported cages are
often investment cast and are manufactured from standard
stock parts.

Fig 6: Ported Cage

Multi Hole Cage

Single and multiple heavy section ‘drilled hole’ cage design offers low
pressure recovery that reduce the potential for excessive noise,
cavitation, vibration and erosion. The MHC trim range has been
designed to operate on all fluid combinations, both clean and dirty
service.

The MHC range of trims are preferred choice for medium to relatively
high pressure drop applications. Also, MHC trims are easily available in
various special material combinations.
Fig 7: Multi Hole Cage

FCC/11/22-23, Issue 1 Page 5 of 15

 GLOBE CONTROL VALVE
SERIES 11

Bonnet Designs

Standard Bonnet
Standard bonnets with graphite packing may be used for higher
temperature. The packing box is suitable for both single, double
packing and with or without tapping for leak-off connection.

Fig 8:
Standard Bonnet

Extension Bonnet
Its construction protects the packing from high temperature. It
accommodates all types of packing boxes that is required to meet
stringent emission levels.

Fig 9:
Extension Bonnet

Cryogenic Bonnet
The length of the extension is sufficient to maintain the stem
packing at temperature that is within normal operating conditions
of the packing.

Fig 10:
Cryogenic Bonnet

FCC/11/22-23, Issue 1 Page 6 of 15

 GLOBE CONTROL VALVE
SERIES 11

Packing Box

Single PTFE
Single PTFE arrangement uses a positioning springs, this
packing arrangement offers very good seal performance with
lowest packing friction. This packing set consists of box ring,
positioning spring, anti-extrusion rings & set of V-rings.

Fig 11: Single PTFE

Double PTFE
Double PTFE arrangement has similar with single PTFE
arrangement .This consists of two packing sets this gives
better performance for controlling leakage.

Fig 12: Double PTFE

Graphite
Graphite packing system operate at higher stress levels
and have higher friction values for a given level of
sealing. It will be withstand with high temperature and
pressure.

Fig 13: Graphite

FCC/11/22-23, Issue 1 Page 7 of 15

 GLOBE CONTROL VALVE
SERIES 11

Material Specifications and Temperature for Body and Bonnet

Table 4.1 Material and Temperature for body & bonnet

Temperature Limits (°C)

Body, Bonnet NACE Body, Bonnet
Bonnet Type Stud, Nut Material
Materials MR0175/0103 Gasket
Min. Max.

Standard -29 232

NA B7 / 2H
Extension -29 427
WCB / WCC 316L spiral wound
Standard -29 232
Yes B7M / 2HM
Extension -29 427

Standard -29 232

Extension NA L7 / 7L -46 232

Extension -46 343

LCB / LCC 316L spiral wound
Standard -29 232

Extension Yes L7M / 7ML -46 232

Extension -46 343

Standard -29 232

WC6, WC9 NA B7 / 2H 316L spiral wound
Extension -29 427

Standard B7 / 2H, B8M / 8M -29 232

Extension NA B7 / 2H, B8M / 8M -46 232

Extension B7 / 2H, B8M / 8M -46 427

CF8M, CF3M 316L spiral wound
Standard B7M / 2HM, B8M / 8MA -29 232

Extension Yes B7M / 2HM, B8M / 8MA -46 232

Extension B7M / 2HM, B8M / 8MA -46 427

Standard L7 / 7L, B8M / 8M -29 232

Extension L7 / 7L, B8M / 8M -46 232

Extension L7 / 7L, B8M / 8M -46 316

NA
Standard S32760 -29 232
Duplex 4A
Extension S32760 32760 spiral wound -46 232
Sup.duplex 6A
Extension S32760 -46 316

Standard B8M / 8MA -29 232

Extension Yes B8M / 8MA -46 232

Extension B8M / 8MA -46 316

Notes
1. All alloy steel bolting (B7, L7, B16) are supplied with phosphating as standard.
2. Zinc plating option available on request and its temperature is limited to 200°c.
3. Forged construction and other custom material options available on request.

FCC/11/22-23, Issue 1 Page 8 of 15

 GLOBE CONTROL VALVE
SERIES 11

Material and Temperature Limits for Trim Parts

Table 5.1 Material and Temperature Limits for Trim

Trim Temp
Trim No Stem Plug Seat Cage
Type Min. Max.

1 17-4PH 316 316 316 CoCr-A Guide -29 149

2 17-4PH 316 CoCr-A SA 316 CoCr-A 316 CoCr-A Guide -29 316

3 17-4PH 316 CoCr-A FC 316 CoCr-A 316 CoCr-A Guide -46 316

Cage -29 210

4 17-4PH 316 316 17-4PH
guided
5 17-4PH 316 CoCr-A SA 316 CoCr-A 17-4PH -29 210

6 17-4PH 316 316 316 ENC -198 316

7 17-4PH 316 CoCr-A FC 316 CoCr-A 316 -198 316

Note: For other materials consult factory

Table 5.2

Item Standard Optional

Soft Seal PTFE Graphite, Kel-F

Balance seals Spring energized PTFE lip seal (-196°C to 232°C) Graphite Piston rings (232°C to 427°C)
Graphite Packing
Packing PTFE
High integrity packing
32760 spiral wound with graphite filler
Gaskets 316L spiral wound with graphite filler
Inconel spiral wound with graphite filler

FCC/11/22-23, Issue 1 Page 9 of 15

 GLOBE CONTROL VALVE
SERIES 11

Flow Coefficients
Table 6.1 Micro Spline Trim

Valve Flow
Seat Bore Travel Cv, Eq %
Size Direction
1 1/2 3/4 Under 4.29

1 1/4 3/4 Under 1.03

1 1/4 3/4 Under 0.349

Table 6.2 Contoured Trim

Valve Flow Cv, Eq % Cv, Mod. Eq % Cv, Mod. Eq %

Seat Bore Travel
Size Direction (900 - 2500 #) (900 - 1500 #) (2500 #)
1 1 1 1/8 Under - 17.5 14.1

1 3/4 3/4 Under 9.13 - -

1 3/4 1 1/8 Under - 12.0 12.1

1 1/2 3/4 Under 5.47 - -

1 1/4 3/4 Under 1.24 - -

2 1 1/2 1 1/2 Under - 52.5 43.8

2 1 1/4 1 1/8 Under - 33.2 33.2

2 1 1 1/8 Under - 23.6 24.6

2 3/4 3/4 Under 11.4 - -

2 1/2 3/4 Under 5.42 - -

2 1/4 3/4 Under 1.54 - -

FCC/11/22-23, Issue 1 Page 10 of 15

 GLOBE CONTROL VALVE
SERIES 11

Table 6.3 Ported

Cv, Eq % Cv, Mod. Eq % Cv, Lin

Valve Flow
Seat Bore Travel
Size Direction
(900-1500#) (2500#) (900-1500#) (2500#) (900-1500#) (2500#)

2 1 7/8 1 1/2 Over - - 48.4 - 52 -

2 1 7/8 1 1/8 Over 41.2 - - 37.7 -

2 1 7/8 1 Over - 34.8 - - - 38.1

3 2 7/8 2 Over 92.5 114 - 122 -

3 2 1/4 1 1/2 Over - - - 83.7 - 87.8

4 3 5/8 2 Over - - 201 - 201 -

4 3 5/8 1 1/2 Over 163 - - - - -

4 2 9/10 2 Over - - - 131 - 151

6 5 3/8 3 Over - - 377 - 422 -

6 5 3/8 2 1/2 Over 320 - - - - -

6 4 1/6 3 Over - - - 311 - 322

Table 6.4 Multi Hole Cage

Cv, Eq % Cv, Mod. Eq % Cv, Lin

Valve Flow
Seat Bore Travel
Size Direction
(900-1500#) (2500#) (900-1500#) (2500#) (900-1500#) (2500#)

2 1 7/8 1 1/2 Over - - 38.72 - 41.6 -

2 1 7/8 1 Over - 27.84 - - - 30.5

2 1 7/8 1 1/8 Over 33.0 - - 30.1 -

3 2 7/8 2 Over 74 - 91.2 - 97.6 -

3 2 1/4 1 1/2 Over - - - 67.0 - 70.2

4 3 5/8 2 Over - - 161 - 161 -

4 3 5/8 1 1/2 Over 130 - - - - -

4 2 9/10 2 Over - - 105 121

6 5 3/8 3 Over - - 302 - 338 -

6 5 3/8 2 1/2 Over 256 - - - - -

6 4 1/6 3 Over - - 249 - 257

FCC/11/22-23, Issue 1 Page 11 of 15

 GLOBE CONTROL VALVE
SERIES 11

Table 6.5 Anti Cavitation Trim

Cv, Lin (900 – 1500#) Cv, Lin (2500#)

Flow
Valve Size Seat Bore Travel
Direction
2 Stage 3 stage 2 Stage 3 stage

1 7/8 1.5 Over 7.41 - 7.5 -

2 1 3/4 2 Over 13.4 - 13.4 -

2 1 2 Over - 6.13 - 6.13

3 2 1/2 2 1/2 Over 32.4 - - -

3 1 7/8 2 1/2 Over - 15.7 - -

3 2 1/4 2 1/2 Over - - 31.1 -

3 1 3/8 2 1/2 Over - - - 12.4

4 3 7/16 3 Over 57.65 - - -

4 2 7/8 3 Over - 28.2 - -

4 2 9/10 2 3/4 Over - - 40.3 -

4 2 1/4 2 3/4 Over - - - 22.4

6 5 1/4 4 Over 120 - - -

6 4 9/16 4 Over - 64.1 - -

6 4 1/6 3 3/4 Over - - 83.9 50.7

FCC/11/22-23, Issue 1 Page 12 of 15

 GLOBE CONTROL VALVE
SERIES 11

Table 6.6 Low Noise Trim

Cv Linear (900 &1500#)

Valve Size Seat Bore Travel Flow Direction
1.1 1.3 2.1 2.3 3.1 3.3 4.3

2 1 7/8 1 1/2 Under 42.1 - - - - - -

2 1 7/8 1 1/2 Under 40.9 - - - - -

3 2 7/8 2 Under 107 - 47.9 - - - -

3 2 7/8 2 Under 110 - 44.4 - - - -

4 3 5/8 2 Under 162 - - 86.8 - 55.9 -

4 2 7/8 2 Under - - - - - - 37.1

4 3 3/5 2 Under 134 131 101 105 72.8 72.8 -

6 5 3/8 3 Under 322 - - 162 - 108 -

6 4 3/8 3 Under - - - - - - 69.6

6 5 2/5 3 Under 263 271 216 237 162 162 -

Table 6.7 Low Noise Trim

Cv Linear ( 2500 #)
Valve Size Seat Bore Travel Flow Direction
1.1 1.3 2.1 2.3 3.1 3.3 4.3

2 1 7/8 1 1/2 Under 35.2 - - - - - -

3 2 1/4 1 1/2 Under 65.3 69.6 39.8 48.7 37.2 37.2

3 1 3/8 2 Under - - - - - - 26.1

4 2 9/10 2 Under 121 123 80.3 81.2 53.7 53.6 -

4 2 1/4 2 Under - - - - - - 40.3

6 4 1/6 3 Under 262.23 254 172 177.24 106.21 115.7 115.7

Note:
The 1st Digit here indicate the distance between holes. And 2nd Digit here indicate the hole size (or) diameter.

FCC/11/22-23, Issue 1 Page 13 of 15

 GLOBE CONTROL VALVE
SERIES 11

Dimensions & Weights

Match line for actuator

Consult factory for angle valve

dimensions and weights

Table 7.1 Dimensions & Weights

Valve Stem A (mm) B (mm) Weight (kg)

C (mm)
Size Dia
Std Bonnet
(inch) (inch) 900# 1500# 2500# 900-1500# 2500# 900# 1500# 2500#

1 1/2 292 292 318 52 63 260 42 42 45

1 3/4 292 292 318 52 63 267 42 42 45

2 1/2 378 378 416 77 84 279 72 72 104

2 3/4 378 378 416 77 84 286 72 72 104

2 1 378 378 416 77 84 344 72 72 104

3 1/2 445 464 667 121 120.4 322 125 129 228

3 3/4 445 464 667 121 120.4 311 125 129 228

3 1 445 464 667 121 120.4 370 125 129 228

4 3/4 514 533 747 175 136.8 300 230 249 480

4 1 514 533 747 175 136.8 368 230 249 480

6 3/4 718 775 877 248 204.7 365 511 557 1080

6 1 718 775 877 248 204.7 402 511 557 1080

Note
1. For non-standard sizes consult factory
2. Face to Face given is for RTJ Flange

FCC/11/22-23, Issue 1 Page 14 of 15

 Flow Control Commune
# 9 Multi Industrial Estate, Gerugambakkam, Chennai 600122 India. Website: www.fccommune.com

FCC/11/22-23, Issue 1