The Atlas Copco Boomer L1D underground drill rig is equipped with a heavy duty BUT 35 boom and choice of rock drills including the COP 1638, 1838, or 2238. It has hydraulic controls, carrier with four-wheel drive, protective roof, and integrated hydraulic, electrical, water, and air systems to power the drill. Key specifications include the rock drill design, boom dimensions, hydraulic pressure, and dimensions/power of the carrier vehicle.
The Atlas Copco Boomer L1D underground drill rig is equipped with a heavy duty BUT 35 boom and choice of rock drills including the COP 1638, 1838, or 2238. It has hydraulic controls, carrier with four-wheel drive, protective roof, and integrated hydraulic, electrical, water, and air systems to power the drill. Key specifications include the rock drill design, boom dimensions, hydraulic pressure, and dimensions/power of the carrier vehicle.
The Atlas Copco Boomer L1D underground drill rig is equipped with a heavy duty BUT 35 boom and choice of rock drills including the COP 1638, 1838, or 2238. It has hydraulic controls, carrier with four-wheel drive, protective roof, and integrated hydraulic, electrical, water, and air systems to power the drill. Key specifications include the rock drill design, boom dimensions, hydraulic pressure, and dimensions/power of the carrier vehicle.
The Atlas Copco Boomer L1D underground drill rig is equipped with a heavy duty BUT 35 boom and choice of rock drills including the COP 1638, 1838, or 2238. It has hydraulic controls, carrier with four-wheel drive, protective roof, and integrated hydraulic, electrical, water, and air systems to power the drill. Key specifications include the rock drill design, boom dimensions, hydraulic pressure, and dimensions/power of the carrier vehicle.
Atlas Copco Face drilling rigs Technical specification
Boomer L1 D BOOMER L1D Equipped with COP1638, COP1838 or COP 2238 rock drill UNDERGROUND DRILL RIGS TECHNICAL SPECIFICATION
w w w .atlascop co.com
L1 D
Hydraulic direct controlled tunnelling and mining rig with heavy
duty BUT 35 boom. Available with a variety of rock drills to suit dif- ferent requirements.
Standard features »Rock drill »Control system • COP 1638, COP 1838 or COP 2238 rock drill with dual- • Hydraulically controlled drilling system which incorporates damping system for optimal drill consumable life the anti-jamming function Rotation Pressure Controlled Feed • Pressurized housing and mating surfaces to reduce internal (RPCF) contamination of the rock drill »Carrier »Hydraulic boom • Sturdy, articulated carrier with four-wheel drive • BUT 35 heavy-duty boom with double tripod suspensionfor • Four jacks for stable set-up accurate hydraulic parallel holding in all directions »General »Hydraulic feed • FOPS-approved telescopic protective roof • BMH 6800-series heavy-duty aluminium feed with high • Hydraulically driven water booster pump bending and torsional resistance for maximum durability • Cable reel • Snap-on stainless steel sleeves and polymer contacts • Working lights Boomer L1 D with COP 1638, COP 1838 or COP 2238
Specifications ROCK DRILL »Electrical system COP 1638 COP COP 2238 1838ME • Total installed power .................................................... 83 kW • Main motors, Sf 1.15.................................................1x75 kW Shank adapter R32/R38/T38 R32/R38/T38 R32/R38/T38 • Voltage.................................................................400–1 000 V Height over drill centre 88 mm 88 mm 88 mm • Frequency.................................................................50–60 Hz Length without shank 1 008 mm 1 008 mm 1 008 mm • Starting method ................................... star/delta (400–700 V) Impact power 16 kW 18 kW 22 kW • Electronic overload protection for electric motors Impact rate 60 Hz 60 Hz 73 Hz • Percussion hour meter on operator display Hydraulic pressure 200 bar 230 bar 250 bar • Digital voltmeter/amperage meter in electric cabinet Rotation system Separate Separate Separate • Phase sequence indicator rotation rotation rotation • Earth fault indicator Rotation speed 0–340 rpm 0–340 rpm 0–340 rpm • Battery charger Rotation torque 440–1 000 Nm 640–1 000 Nm 640–1 000 Nm • Transformer....................................................................8 kVA Lub. air consump. at 2 5–7 l/s 5 l/s 5 l/s • Cable reel, diameter ................................................ 1 600mm bar • Dual controls for cable reel Water consumption 35–120 l/m 40–120 l/m 50–120 l/m Weight 173 kg 170 kg 174 kg »Hydraulic system Sound level <106 dB(A) <106 dB(A) <106 dB(A) • Hydraulic pumps ............................................................. 1 unit FEED • Pumps unloaded at start BMH 6800 BMH 6812 BMH BMH BMH BMH • System pressure, max............................................150–240 bar 6814 6816 6818 6820 • Hydraulic oil tank, volume max/min ........................ 255/170l • Low oil level indicator Total length 5 287 mm 5 882 mm 6 502 mm 7 102 mm 7 677 mm • Oil temperature gauge on oil tank Drill steel 3 700 mm 4 310 mm 4 920 mm 5 530 mm 6 100 mm • Electrical oil filling pump length • Oil filter indicator Hole depth 3 443 mm 4 043 mm 4 668 mm 5 268 mm 5 843 mm • Water cooled oil Weight, incl. 601 kg 631 kg 665 kg 696 kg 721 kg drill • Filtration......................................................................... 16 µm Feed force 20.0 kN 22.0 kN 22.0 kN 22.0 kN 22.0 kN • Mineral hydraulic oil
»Boom »Carrier • Boom........................................................................BUT 35G • Deutz 4-cylinder, TCD 2013 L04, EPA III/COM III (Tier 3/ • Feed extension......................................................... 1 800 mm Stage IIIA) approved 4-stroke prechamber diesel engine • Boom extension....................................................... 1 600 mm • Power rating at 2 300 rpm............................ 120 kW (160 hp) • Parallel holding .........................................................complete • Torque at 1 600 rpm ....................................................618Nm • Feed roll-over...................................................................360° • Articulated steering.................................. ±41° steering angle • Max. lifting angle .....................................................+70º/-45° • Four-wheel drive • Max. swinging angle ........................................................±45° • Hydrostatic power steering system • Weight, boom only .....................................................2 860kg • Hydrodynamic transmission.................................Clark 24000 • Front axle ..........................................................Dana 123/127 »Air system • Rear axle ..................................Dana 123/127, ±8° oscillation • Automatic differential lock on front axle, limited slip • Hydraulically driven screw compressor... GAR 5 • Tyres.......................................................................12.00xR24 • Capacity, max at 7 bar ......................................................20l/s • Clearance outside axles .............................. 13º rear, 22º front • Adjustable speed • Hydraulic jacks, front ......................................... 2 extendable • Air pressure gauge • Hydraulic jacks, rear ..............................................................2 • Service brakes .............................................2 separate circuits • Emergency and parking brakes .....................................SAHR • Fuel tank, volume............................................................ 100 l »Water system • Exhaust catalyser • Silencer • Hydraulically driven water booster pump.......Flygt PXR411H • Electric system .................................................................24V • Water booster pump max capacity at 15 bar ............. 250 l/min • Batteries............................................................2x12V, 125 Ah • Min water inlet pressure at 200 l/min, .............................2bar • Tramming lights .....6 x 40 W LED + 2 x 70 W halogen, 24 V • Water pressure gauge • Working lights .................................4 x 80 W LED, 24 V DC • Brake lights • Illuminated stairs • Fire extinguisher • Central lubrication system • Spirit level ...................one for longitudinal, one for sideways • Gradeability at max. load on drive wheels......................... 1:4 • Horn, beacon and reverse alarm • Shelf for drill bits and tools Boomer L1 D with COP 1638, COP 1838 or COP 2238
DRIFTER RODS SHANK ADAPTERS
Dimension Min. hole thread Diamet Length diameter er mm R32-H35-R38 45 mm R38 38 435
R32-H35-T38 45 T38 38 435
R32-H35-T38 Speedrod 45 R32* 38 525
SR35-H35-T38 Speedrod 45 T38* 38 525
SR35-H35-T38 45
SR35-R39-T38 45 COUPLINGS R32-R39-T38 45 thread Diamet Length SR35-R39-T38 Speedrod 45 er mm R38 55 170
EXTENSION RODS FOR INJECTION T38 55 190
DRILLING/RAS Dimension Min. hole diameter mm Rnd 32 Speedrod 51
Rnd 38 Speedrod 64
Optional equipment »Rock drill/Drilling system »Water system • Water mist flushing, external water and air supply • Water hose reel (incl. water hose) • External air supply connection for hole blowing kit • Water flow guard, flushing water • Hole blowing kit with 80 l air receiver »Hydraulic system »Feed* • Biodegradable hydraulic oil • Telescopic feed BMHT 6000-series (max 18 ft) • Heater kit for hydraulic oil tank, diesel engine and electric • Extension drilling set BSH 110 (BMH feeds only) motors • Feed prepared for RAS • Rod Adding System, RAS • Water spraying kit on cradle »Carrier • Mining centralizers (heavy-duty) • Engine Deutz TCD 2013 L06V* • Exhaust system: particle filter • Fire suppression system ANSUL (manual orCheckfire) »Boom* • Fire suppression system FORREX (manual or automatic) • BUT 35L (long boom) • Large plates for boom frame hydraulic jacks • Automatic boom lubrication kit, rear part of boom • Hot climtae tramming kit • Feed Angle Measurement (FAM) 1 • Feed Angle Measurement (FAM) 2 with hole depth »Electrical system • Stainless steel electrical enclosure »Protective roof • Electric cable type H07RN-F or Buflex • Mounting height -80 mm/+60 mm/+310 mm • Plug for cable • Manual spotlight, left and/or right • Switch gear • Swingable seat for drilling and tramming • Electrical outlet voltage 16 A 3-phase (CE and not for 1 000 V) »Cabin • Extra transformer, 3-phase, 15 kVA (230/400 V) • Starting method – soft start (not for 1 000 V) • FOPS-approved cabin, noise level <80 dB(A), height 3 044 mm including: - Air conditioning unit »Miscellaneous - Fixed seat • Service platform HL210 - CD-changer • Protective roof for service platform - Boot washing kit • Water and air outlet in service platform • Cabin body made of stainless steel • Hose/cable guiding at water/cable reel • Front window, 24 mm • Hydraulic Swellex pump type H1 for manual installation • Heating function for air conditioning (water transferred) • Manual lubrication kit • Electrical heater, 1.2 kW, 230 V (CE) • Rig washing kit • Joystick-controlled spotlights left and/or right • Boot washing kit • Swingable seat for drilling and tramming • Ni-Cr plated piston rods (limitations exist)
*Some feed, boom and engine selections may require
Turning and Boring
A specialized treatise for machinists, students in the industrial and engineering schools, and apprentices, on turning and boring methods, etc.
Experimental and numerical studies on the enhanced heat transfer performance and the flow resistance characteristics of the double-wall cooling structure with jet impingement holes and pin fins
