Paint

Technical Data Sheet
^(ValidationDate) 43402 43402 5 2

AE - BH - EG - KW - MA - OM - QA - SA Approved Other
Fenomastic Wonderwall Life
Product description
Type
This product is a high-quality interior paint based on pure acrylic emulsion.
Features and benefits

Comes with luxurious silky finish that gives you the colour you expected along with superior washability keeping
your walls beautiful every day. Specially designed with Formaldehyde abatement technology that improves
indoor air quality. Specially designed for easy stain removal without affecting the paint properties. Free from
harmful chemicals like APEO, formaldehyde, heavy metals etc. Has very low VOC which ensures good indoor air
quality. Easy to apply and good coverage gives an even , beautiful surfaces. Also has Anti-Bacterial and Anti-
Fungal property.
Recommended use
Strongly recommended for interiors of high traffic areas such as kids rooms, Schools, party halls, Kitchens,
living rooms, dining rooms etc.
Substrate
Cement plaster, concrete, block work, rendered surfaces, gypsum board etc.
Substrate should have sufficient strength to receive the paint. Any defects in the substrate like surface
undulations, cracks, pin holes etc., should be rectified/filled before starting painting.
Product data
Packaging size 1 L, 4 L and 18 L
Colours White and all interior colours available in Jotun Multicolor system.
Solids by volume 45 ± 2 volume% Theoretical

Specific gravity 1.43 Theoretical Only for white colour
VOC 4 g/l ISO 11890 EU

VOC comments This is the theoretical value. Tested value will vary depending on test methodology,
accuracy of equipment used for testing and test conditions.
Application data
The product can be applied by
Roller : Recommended.
Brush Recommended to paint corners and edges.
Spray : Airless spray or Conventional spray.
Guiding data for airless spray

Nozzle tip 0.021–0.027"
Spray angle degrees 65–80°
Pressure at nozzle 140 - 190 kg/cm² (2100 psi)
Date of issue: 06.06.2023 Product code: 43402 Page: 1/4
This Technical Data Sheet supersedes those previously issued.

The Technical Data Sheet (TDS) is recommended to be read in conjunction with the Safety Data Sheet (SDS) for this product.
For your nearest local Jotun office, please visit our website at www.jotun.com.
2

Film thickness per coat

Typical recommended range
Dry film thickness 30 - 50 µm
Wet film thickness 66 - 111 µm
Film thickness will vary and is calculated as average.
Theoretical spreading rate 15 - 9 m²/l
Spreading rate depends on film thickness applied, type of texture, surface porosity, imperfections, temperature,
wastage during painting etc.
Maximum spread rate per coat is obtained at minimum dry film thickness and vice versa.
Thinner
Water
Dilution
Maximum 10 %
Conditions during application

The temperature of the substrate should be minimum 10 °C and at least 3 °C above the dew point of the air,
measured in the vicinity of the substrate. Good ventilation is usually required in confined areas to ensure proper
drying.
Drying times
Drying times are generally related to air circulation, temperature, film thickness and number of coats, and will
be affected correspondingly.
1. Recommended data given is, for recoating with the same generic type of paint.
2. In case of multi-coat application, drying times will be influenced by the number and sequence and by the total
thickness of previous coats applied.
3. The surface should be dry and free from any contamination prior to application of the subsequent coat.
The drying time is measured by stated values:

Relative Humidity (RH) 50 %
Substrate temperature 10 °C 23 °C 40 °C
Surface (touch) dry 12 h 6h 2h

Hard dry 16 h 8h 4h
Dry to over coat, minimum 12 h 6h 2h
Directions for use

Surface preparation
The substrate must be sound, clean, dry and free from dust, oil, grease, laitance etc. All traces of form release
agents/curing agents must be removed. A light sanding with suitable abrasive material is recommended before
application. Any resulting dust/loose particles must be removed.
Recommended paint system
Primer
Fenomastic Emulsion Primer : 1 Coat

2

Filler
Stucco : 2 Coats
and
Fenomastic Emulsion Primer : 1 Coat
Topcoat
Fenomastic Wonderwall Life : 2 Coats
First coat has to be diluted to 20% and second coat as per recommendation.
An additional coat may be required for certain bright colours, dark colours and significant colour changes.
For repainting:
Fenomastic Wonderwall Life : 2 - 3 Coats
Remarks
Other systems may be specified, depending on area of use.
Masking tape has to be removed immediately after application of the topcoat.
Contents of packaging with different batch numbers must be mixed together before use.
Please refer to the Decorative Sales Department for technical advice.
This product is available in: United Arab Emirates, Bahrain, Kuwait, Qatar, Saudi, Oman, Egypt and Libya
Storage
The product must be stored in accordance with national regulations. Keep the containers in a dry, cool, well
ventilated space and away from sources of heat and ignition. Containers must be kept tightly closed. Handle
with care.
Environmental labelling
Green Building Standards
The declared product contributes to Green Building Standard credits by meeting the following specific
requirements :
LEED®v4 (2013) / LEED®v4 .1 (2019):
EQ credit: Low emitting materials

- VOC content for Nonflat Coatings (Gloss >5 and <70 on 60 degree meter) (100 g/l) (CARB (SCM)2007) and
emission less or equal to 0.5 mg/m3 (CDPH method 1.2)
MR credit: Building product disclosure and optimization

- Material Ingredients, Option 2: Material Ingredient Optimization, International Alternative Compliance Path -
REACH optimization: Fully inventoried chemical ingredients to 100 ppm and not containing substances on the
REACH Authorization list – Annex XIV, the Restriction list – Annex XVII and the SVHC candidate list.
- Environmental Product Declarations. Product-specific Type III EPD (ISO 14025;21930, EN 15804).
BREEAM® International (2016)
- Hea 02 : VOC emission ((ISO 16000 - series (2006) or CDPH method 1.2 (2017)) and the VOC content for
Interior matt walls and ceilings (Gloss <25 @60°) (10 g/L)
- Mat 01: Product-specific Type III EPD (ISO 14025;21930, EN 15804).
Additional certificates and approvals may be available on request.

2

Certificates
Chemical Emissions Compliance: UL Greenguard Gold Certification as per UL 2818-2013
Formaldehyde Abatement : Purification performance for Formaldehyde as per JC/T 1074-2008
Scrub resistance : Tested in accordance with EN ISO 11998:2006 - Class 1
Cleanability/ practical washability : Tested in accordance with ASTM D4828
Resistance to Household Chemicals : Tested in accordance with ASTM D1308
Measurement of antibacterial activity : Tested in accordance with ISO 22196: 2011
Resistance to Growth of Mold/Fungus on the Surface of Interior Coatings in an Environmental Chamber :

Tested in accordance with ASTM D3273 -16
Burnish Resistance : Tested in accordance with ASTM D 6736
Reaction to Fire : Tested in accordance with ASTM E 84 - Class A
Health and safety

Please observe the environmental and precautionary notices displayed on the container.
A Material Safety Data Sheet for the product has been issued.
Detailed information regarding health and safety risks and precautions for the use of this product is specified in
the product's Safety Data Sheet.
First-aid measures, refer to section 4.
Handling and storage, refer to section 7.
Transport information, refer to section 14.
Regulatory information, refer to section 15.
Disclaimer
The information in this document is given to the best of Jotun's knowledge, based on laboratory testing and
practical experience. Jotun's products are considered as semi-finished goods and as such, products are often
used under conditions beyond Jotun's control. Jotun cannot guarantee anything but the quality of the product
itself. Minor product variations may be implemented in order to comply with local requirements. Jotun reserves
the right to change the given data without further notice.
Users should always consult Jotun for specific guidance on the general suitability of this product for their needs
and specific application practices.
If there is any inconsistency between different language issues of this document, the English (United Kingdom)
version will prevail.


Paint

Uploaded by

Copyright:

Available Formats

Paint

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Paint

Uploaded by

Copyright:

Available Formats

Technical Data Sheet

^(ValidationDate) 43402 43402 5 2

Fenomastic Wonderwall Life

Features and benefits

Solids by volume 45 ± 2 volume% Theoretical

VOC 4 g/l ISO 11890 EU

Guiding data for airless spray

Date of issue: 06.06.2023 Product code: 43402 Page: 1/4

This Technical Data Sheet supersedes those previously issued.

Technical Data Sheet

Film thickness per coat

Conditions during application

The drying time is measured by stated values:

Surface (touch) dry 12 h 6h 2h

Directions for use

Recommended paint system

Date of issue: 06.06.2023 Product code: 43402 Page: 2/4

This Technical Data Sheet supersedes those previously issued.

Technical Data Sheet

Fenomastic Emulsion Primer : 1 Coat

Fenomastic Wonderwall Life : 2 - 3 Coats

Masking tape has to be removed immediately after application of the topcoat.

Please refer to the Decorative Sales Department for technical advice.

LEED®v4 (2013) / LEED®v4 .1 (2019):

EQ credit: Low emitting materials

MR credit: Building product disclosure and optimization

BREEAM® International (2016)

Additional certificates and approvals may be available on request.

Date of issue: 06.06.2023 Product code: 43402 Page: 3/4

This Technical Data Sheet supersedes those previously issued.

Technical Data Sheet

Formaldehyde Abatement : Purification performance for Formaldehyde as per JC/T 1074-2008

Scrub resistance : Tested in accordance with EN ISO 11998:2006 - Class 1

Cleanability/ practical washability : Tested in accordance with ASTM D4828

Resistance to Household Chemicals : Tested in accordance with ASTM D1308

Measurement of antibacterial activity : Tested in accordance with ISO 22196: 2011

Resistance to Growth of Mold/Fungus on the Surface of Interior Coatings in an Environmental Chamber :

Burnish Resistance : Tested in accordance with ASTM D 6736

Reaction to Fire : Tested in accordance with ASTM E 84 - Class A

Health and safety

Date of issue: 06.06.2023 Product code: 43402 Page: 4/4

This Technical Data Sheet supersedes those previously issued.

You might also like