2011 Leupold Tactical Catalog

2 0 1 1 TA C T I C A L P R O D U C T S C ATA L O G
W W W. L E U P O L D . C O M / TA C T I C A L
At the range, on the hunt, in the field.

The Leupold Tactical Optics Division is committed to superior optical performance, rugged dependability, and unbeatable customer satisfaction. Our team is driven to ensure your mission success. That is why there are more long-range Leupold Tactical Optics currently in service with the U.S. military than any other brand. Over 600 Oregon-based employees stand ready to design, engineer and manufacture rugged, precision optics to your demanding specifications.
10T ER 150 370 (PORTLAND, OR)
SCOPES MARK 8 CQB-SS MARK 4 ER/T M5 LOCKING BATTLEFIELD UPGRADE ER/T LR/T FIXED POWER LR/T MARK 4 HAMR MR/T MARK AR PRISMATIC CQ/T DELTAPOINT SPOTTING SCOPES MARK 4 SPOTTING SCOPES MARK 4 INVERTED SPOTTING SCOPES GOLDEN RING SPOTTING SCOPES BINOCULARS TACTICAL BINOCULARS RX SERIES & RANGEFINDERS MXc FLASHLIGHTS MOUNTS, RINGS & BASES TOOLS & ACCESSORIES RETICLES PRODUCT SPECIFICATIONS ORDERING INFO PRO STAFF
PAGE
4-5 6-7 8-9 10-11 12-13 14-17 18-19 20-21 22-23 24-25 26-27 28-29
MARK 8 CQBSS
MARK 4 ER/T M5 AUTO-LOCKING
BATTLEFIELD UPGRADE & M5 DIALS
MARK 4 ER/T RIFLESCOPES
1.1-8x24mm NEW >>
6.5-20x50mm NEW >>
4.5-14x50mm M1/M3 8.5-25x50mm M5 NEW >>
Pg. 4-5
Pg. 6-7
Pg. 8-9
Pg. 10-11
30-31 32 33 PRISMATIC MARK 4 CQ/T DELTAPOINT REFLEX SIGHT MARK 4 SPOTTING SCOPES
34-35 36-37 38 39-41 42-43 44-49 50 51 52-53

1x14mm 1-3x14mm 12-40x60mm NEW >> 20-60x80mm
CONTENTS
Pg. 24-25
Pg. 26-27
Pg. 28-29
Pg. 30-31
LR/T FIXED POWER RIFLESCOPES
MARK 4 LR/T RIFLESCOPES
MARK 4 HAMR
MARK 4 MR/T RIFLESCOPES
MARK AR RIFLESCOPES
10x40mm M1/M3 16x40mm M1
3.5-10x40mm M1/M2/M3 4.5-14x40mm Target/M1 6.5-20x50mm M1 8.5-25x50mm M1
4x24mm NEW >> Pg. 18-19
1.5-5x20mm M1/M2 2.5-8x36mm M1/M2
1.5-4x20mm 3-9x40mm T2 4-12x40mm T2 6-18x40mm T1
Pg. 12-13
Pg. 14-17
Pg. 20-21
Pg. 22-23
GOLDEN RING SPOTTING SCOPES
TACTICAL BINOCULARS
RANGEFINDERS
MXc FLASHLIGHTS
MOUNTS, BASES & RINGS
10-20x40mm 15-30x50mm 12-40x60mm
10x50mm 6x32mm 8x32mm 10x32mm 7x42mm 8x42mm 10x42mm
RX-IV NEW >> RX-1000i RX-750 TBR RX-600
Mark 4 PRW/QRW Integral Mounting Systems
Pg. 33
Pg. 34-35
Pg. 36-37
Pg. 38
Pg. 39-41
The CQBSS has been tested under 66ft of water submersion. Absolutely waterproof and fog proof, the Mark 8 CQBSS completely eliminates compromise.
UNDISCLOSED (U.S.A.)
MARK 8 CQBSS
Classified spec-ops soldier in a classified location, prepped for close-quarters battle.
The Leupold Mark 8 CQBSS 1.1-8x24mm incorporates everything professional operators need into one extremely versatile riflescope. An astonishing 1.1-8x magnification range means sacrificing precision for field view is no longer a requirement.
MARK 8 CQBSS
VARIABLE POWER 1.1-8x magnification range, sacrificing precision for field view is no longer a requirement. The front focal plane reticle is accurate at all magnification settings for the ultimate blend of precision and rapid acquisition. WINDAGE & ELEVATION ADJUSTMENT Auto-locking Pinch & Turn adjustments with 0.10 Mil clicks are extremely easy to adjust, yet eliminate accidental adjustment in the field. BDC The AA53 (77 grain 5.56 NATO) BDC dial makes firstround hits a simple reality, while the quick change BDC ring effortlessly adapts to alternate loads. 34MM MAINTUBE Unparalleled windage and elevation adjustment travel, and the ability to bypass the zero-stop in the BDC dial makes zeroing a breeze. VARIABLE ILLUMINATION Eight illumination settings provide optimal dot contrast with or without night vision, and an off position between intensity settings makes returning to the perfect illumination level nearly immediate. DURABLE CONSTRUCTION Absolutely waterproof and fog proof. Includes CR2032 battery, aluminum flip-back lens covers, and a 2.5 lens shade.
MARK 8 CQBSS 1.1-8X24MM FRONT FOCAL
Leupolds Mark 8 Integrated Mounting System (IMS) provide a greater degree of flexibility for use on standard AR rifle platforms. Its 34mm rings are made specifically for the Mark 8 CQBSS and the Mark 4 ER/T M5 Locking optics. See page 40.
MARK 8 INTEGRATED MOUNTING SYSTEM (IMS)
NEW MTMR
CQBSS MODELS
RETICLE PART NO.

110121
1.1-8x24mm Front Focal NEW M-TMR Matte Black finish. Illuminated Reticle
MARK 4 ER/T M5 LOCKING
15S YV 482 400 (TIER 1 GROUP COMPOUND, WEST MEMPHIS)

U.S. forces conduct stateside sniper training exercise prior to deployment.
MARK 4 ER/T M5 AUTO-LOCKING ADJUSTMENT

Designed and engineered with the military sniper in mind, Leupold quickly responded to the need for a next generation precision long-range riflescope with the Mark 4 Extended Range/Tactical.
ELEVATION LOCK Auto-locking elevation adjustment for rocksolid reticle adjustment and an elevation zero-stop to prevent under-rotation in stressful situations. A tactile revolution indicator on the elevation adjustment eliminates any guess work. LENS COATING Leupold Xtended Twilight Lens System delivers superior resolution across the visual field in low-light situations. Wavelength-specific coatings optimize the transmission of low-light wavelengths and are matched with glass indices to achieve maximum transmission of the blue/ violet spectrum. 34MM MAIN TUBE For greater strength and wider range of windage and elevation adjustment. FRONT FOCAL PLANE RETICLE With the reticle in the front focal plane of the ER/T, the reticle magnifies with the image so range estimation and holdover values remain consistent throughout the power range. USER PARALLAX ADJ. CONTROL Side focus parallax adjustments from 50 yards to infinity, from any shooting position. MARK 4 ER/T M5 LOCKING
6.5-20x50mm 6.5-20x50mm
WINDAGE AND ELEVATION ADJUSTMENTS Each revolution of the elevation dial produces 10 milliradians of travel, allowing access to the 20 milliradians of total internal adjustment in just two rotations.
RETICLE
H-58 H-27
PART NO.
111855 68140
ER/T 6.5-20X50MM
Leupolds Mark 8 Integrated Mounting System (IMS) provide a greater degree of flexibility for use on standard AR rifle platforms. Its 34mm rings are made specifically for the Mark 8 CQBSS and the Mark 4 ER/T M5 Locking optics. See page 40.
Contract rifle for Remington XM2010
Battle-proven reticles provide precise bullet placement while providing immediate and intuitive feedback for potential shot correction. Designed, machined, assembled and tested by the world leader in precision optics, the Leupold Mark 4 line isnt the last word in precision sniper riflescopes, its the only word.
1 3 5 7 9 11 13 15 17 19 21
1 3 5 7 9 11 13 15 17 19 21
H-27
H-58
upgrade
BATTLEFIELD UPGRADE
LEUPOLD TACTICAL OFFERS A NEW GENERATION OF ADVANCED FEATURES IN THE MARK 4 LINE WHICH INCLUDE: XTENDED TWILIGHT LENS COATINGS, ILLUMINATION MODULES, HORUS RETICLES, AND M5 DIALS. RETROFITS OF FEATURES MAY BE OFFERED THROUGH THE CUSTOM SHOP. FEATURE COMBINATION LIMITATIONS APPLY, PLEASE CALL 1800LEUPOLD FOR AVAILABILITY.
battlefIeld
the leupold mark 4
ready for deployment
RETICLE MODIFICATION
DIAL OPTIONS
Virtually every configuration of tactical adjustment dials are available through the Leupold Custom Shop. If your mission specifications require an optic and dial configuration that isnt found in our standard line, the custom shop may be able to create it for you. Choose from low-profile dials like M2 or M3 with coarser MOA adjustments designed for speed or all-out precision options like M5 dials that feature audible and tactile adjustments in 1/10-MIL clicks.
BULLET DROP COMPENSATION OPTIONS

Many Leupold Mark 4 riflescopes feature Bullet Drop Compensation Dials. If yours doesnt, let the Leupold Custom Shop put 50+ years of scopesmithing experience to work, adding custom Bullet Drop Compensation (BDC) dials to your Leupold riflescope. Fill out our ballistics worksheet (available at www.leupold.com) with your ballistics data, and we will, in turn, create a precision laser-engraved dial that allows you to adjust for bullet impact at extremely long range. The positive click adjustment dials are made of aircraft-grade aluminum, with the appropriate ranges clearly and accurately laser-engraved on the dial. Simply determine range to the target then adjust to the corresponding mark on the elevation dial to achieve startling long-range precision. In addition to the precision laser-engraving, Leupold adjustment dials are double O-ring sealed against the moisture, dust, and sand youll encounter in the field. They also give you superior repeatable adjustment, virtually free of accuracy-degrading backlash or overtravel.
M5 DIAL
CIRCLE PLEX (ILLUMINATED) TMR (ILLUMINATED) SPR (ILLUMINATED)
FINE DUPLEX
DUPLEX
WIDE DUPLEX
M1, M5
M2 (Short Version)
For more information, contact the Leupold Custom Shop at 1-800-LEUPOLD or (503) 526-1400. Choose from a wide variety of standard dials, or let us create a custom dial to meet your specific needs.
CQ/T CIRCLE DOT (ILLUMINATED)
MIL DOT (ILLUMINATED)
CM-R 2 (ILLUMINATED)
LENS COATINGS
All Leupold lenses are index matched to deliver unsurpassed brightness and edge-to-edge sharpness. Our unique Xtended Twilight Lens System can be incorporated into any optic through our custom shop allowing everything from extended range sniper rifles to patrol rifles access to superior resolution in low-light situations.
10
11
12
M2 (Tall Version)
M3
LR DUPLEX
LRV DUPLEX
M-TMR (ILLUMINATED)
-5 -5
-4
-3
-2
-1
+1
+2
+3
+4
+5 -5
-5
-4 -4
-4
-3
-2
-1
+1
+2
+3
+4
+5 -5 -4 -3 -2 -1
-5 -4 -3 -2 -1 -10 -9 -8 -7 -6 -5 -4 -3 -2 -1 +1 +2 +3 +4 +5
-3
-2
-1 -5 -4 -3 -2 -1 0 +1 +2 +3 +4 +5 0
+6
+7
+8
+9
+10
+1
+2
+1 +2 +3 +4
+1 +2 +3 +4
+3
+4
+5 -5 -4 -3 -2 -1 0 +1 +2 +3 +4 +5
H-58
14 13 12 11 10 9 8 7 6 5 4 3 2 1 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
H-36
H-32
T1
T2
1 2 3 4 5 6 7 8
18 17 16 15 14 13 12 8 5 4 3 2 1 1 2
1 2 3
3 4 5
4 5 6 7 8
1 3 5
9 10 11 12 13 14 15 16 17
12 13 14 15 16 17 18
1 3 5 7 9 11 13 15 17 19 21
9 10 11 12 13 14 15 16 17 18
3 10
7 9 11 13 15 17
12
14 9 8 7 6 5 4 3 2 1 1 2 3 4 5 6 7 8 9
16
18
18
2 1 1 2 3 4 5 6 7 8 9
1-800-LEUPOLD
ORDER TODAY
18
17
16
15
14
13
12
19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34
19 20 21 22 23 24
20
12
13
14
15
16
17
18
19 21
22
H-37
25 26 27 28 29 30 31 32 33 34
H-27
ER/T RIFLESCOPES
38S ME 436 300 (KIRKUK, IRAQ)

A U.S. Army designated Marksman conducts security as the pick up zone is established along the Zaghytun Chay river, about 50 miles southeast of Kirkuk.
MARK 4 ER/T RIFLESCOPES

LENS COATING Leupold Xtended Twilight Lens System delivers superior resolution across the visual field in low-light situations. Wavelength-specific coatings optimize the transmission of low-light wavelengths and are matched with glass indices to achieve maximized transmission of the blue/violet spectrum. USER PARALLAX ADJ. CONTROL Side focus parallax adjustments from 50 yards to infinity, from any shooting position. 30MM MAINTUBES For greater strength and wider range of windage and elevation adjustment.
ER/T 4.5-14X50MM M3 FRONT FOCAL

(ALSO AVAILABLE IN M5)
WINDAGE AND ELEVATION ADJUSTMENTS All Leupold Mark 4 adjustment dials utilize durable, dependable wear and corrosion proof parts and a precision anti-backlash mechanism to provide positive windage and elevation adjustment under the harshest conditions. Furthermore, these dials include a dual erector spring and incorporate a revolution counter for absolute precision. FRONT FOCAL PLANE RETICLE With the reticle in the front focal plane of the ER/T, the reticle magnifies with the image so range estimation and holdover values remain consistent throughout the power range. SOLID CONSTRUCTION Milled from one solid piece of 6061-T6 aircraft-grade aluminum, these scopes are rugged and absolutely waterproof in all conditions. FLIP-OPEN LENS COVERS Standard issue with Mark 4 ER/T riflescopes.
ER/T 6.5-20X50MM M5
ER/T MODELS
4.5-14x50mm M1 Front Focal 4.5-14x50mm M3 Front Focal 6.5-20x50mm M1 Front Focal 8.5-25x50mm M1 Front Focal 4.5-14x50mm M5 Front Focal 6.5-20x50mm M5 Front Focal
RETICLE PART NO.

Mil Dot TMR TMR Mil Dot TMR Mil Dot TMR Mil Dot TMR H-27 Mil Dot TMR H-27 H-37 H-58 Mil Dot TMR H-37 H-58 65490 65495 59345 64660 64665 63050 63055 110081 110075 110084 110082 110076 110086 110087 110562 110083 110079 110089 110563
8.5-25x50mm M5 Front Focal
NEW NEW NEW NEW NEW NEW NEW NEW NEW NEW NEW NEW
M5 windage and elevation adjustment dials feature audible, tactile 1/10MIL clicks over an 85-MOA adjustment range for both windage and elevation. On any mission, added weight is increased fatigue. Mark 4 Aluminum mounts are machined from a single piece of aircraft-grade aluminum, so theyre incredibly strong, yet lightweight. Our third-generation illumination is right at home on our line of tactical scopes. Eight intensity levels match for your ambient light conditions. Two intensity settings are also compatible with night-vision equipment. A new off position between each intensity setting lets you easily turn off illumination and snap it back on right where you left it.
For reticles see pg 44-49. For adjustment dials see pg 51. Matte Black finish on all models.
ER/T (Extended-Range/ Tactical) optics provide crystal clarity for positive target identification and generous windage and elevation adjustment capabilities that enable you to engage out to virtually any rifles potential. Front focal plane reticle provides effective ranging at any magnification setting.
11
M24, M110, M107. To some, its just letters and numbers. People who know...or know how to use Google...will find these systems have a common thread: Leupolds LR/T. Only the LR/T provides pinpoint precision, durable, waterproof construction, and crystal clear optics in any light.
LR/T 10X40MM M1
MARK 4 LR/T FIXED POWER
LR/T 10X40MM M3
MARK 4 LR/T FIXED POWER

LENS SYSTEM Leupold Index Matched Lens System delivers unsurpassed brightness and edge-to-edge sharpness for unbeatable target definition, even in poor light. FLIP-OPEN LENS COVERS Standard issue with Mark 4 LR/T riflescopes. 30MM MAINTUBE The larger diameter tube affords a greater range of windage and elevation adjustment and increased strength. WINDAGE & ELEVATION ADJ. All Leupold Mark 4 adjustment dials utilize durable, dependable wear and corrosion proof parts and a precision anti-backlash mechanism to provide positive windage and elevation adjustment under the harshest conditions. Furthermore, these dials (except M3) incorporate a revolution counter for absolute precision and a dual erector spring.
LR/T 16X40MM M1
LR/T MODELS
RETICLE PART NO.
10x40mm M1 Mil Dot 48431 10x40mm M3 47638 Mil Dot 16x40mm M1 50541 Mil Dot For reticles see pg 44-49. For adjustment dials see pg 51. Matte Black finish on all models.
On any mission, added weight means increased fatigue. Mark 4 Aluminum mounts are machined from a single piece of aircraft-grade aluminum, so theyre incredibly strong, yet lightweight.
42S WB 790 910 (KHOST, AFGHANISTAN)

A soldier hands an Afghan girl a bottle of water during an operation in Khost Province.
13
41S NS 940 009 (MIZAN, AFGHANISTAN)

Army infantry sniper squad provides over-watch during a foot patrol near a forward operating base in Mizan, Afghanistan. Pictured: mark 4 lr/t 4.5-14x50mm with an m107 0.5 cal barrett

LENS SYSTEM Leupold Xtended Twilight Lens System delivers superior resolution across the visual field in low-light situations. 30MM MAINTUBE For a greater range of windage and elevation adjustment.
LR/T 3.5-10X40MM M5 FRONT FOCAL
USER PARALLAX ADJUSTMENT CONTROL Side focus parallax adjustment can be used from any shooting position to remove parallax and deliver absolutely crisp focus essential for precise shot placement. WINDAGE AND ELEVATION ADJUSTMENTS Knurled, finger-adjustable click windage and elevation dials. All Leupold Mark 4 adjustment dials utilize durable, dependable wear and corrosion proof parts and a precision antibacklash mechanism to provide positive windage and elevation adjustment under the harshest conditions. Furthermore, these dials include a dual erector spring and incorporate a revolution counter for absolute precision.
FLIP-OPEN LENS COVERS Standard issue with Mark 4 LR/T riflescopes. 3RD GENERATION ILLUMINATED RETICLES Off positions between on positions with positive clicks and a hard stop at the lowest off position. NIGHT VISION COMPATIBLE The lowest two illumination settings on Leupold Mark 4 Illuminated riflescopes are compatible with night vision devices.
LR/T 3.5-10X40MM M3 FRONT FOCAL
LR/T 3.5-10X40MM M2 ILLUM. RETICLE

(DARK EARTH FINISH)

(ALSO AVAILABLE IN NON-ILLUMINATED MODELS)
LR/T MODELS
3.5-10x40mm M1 Front Focal 3.5-10x40mm M3 Front Focal 3.5-10x40mm (30mm) M5 Front Focal 3.5-10x40mm M2 Dark Earth Finish 3.5-10x40mm M1
RETICLE PART NO.

Mil Dot TMR Mil Dot TMR NEW Mil Dot NEW TMR TMR 58850 60030 58860 60035 110080 110074 67940
(ALSO AVAILABLE IN NON-ILLUMINATED MODELS)
Mil Dot 52128 Mil Dot 67930 TMR 60020 TMR 67935 3.5-10x40mm M3 Mil Dot 51850 Mil Dot 67945 TMR 60025 TMR 67950 4.5-14x40mm Target Duplex 56140 Mil Dot 56130 Illuminated Reticle - Matte Black finish on all models except 3.5-10x40mm LR/T M2 which is Dark Earth finish. For reticles see pg 44-49. For adjustment dials see pg 51.
Our third-generation illumination is right at home on our line of tactical scopes. Eight intensity levels match for your ambient light conditions. Two intensity settings are also compatible with night-vision equipment. A new off position between each intensity setting lets you easily turn off illumination and snap it back on right where you left it. No more cycling through all the settings to find where you left it. There is also a hard stop at the end of the dial, so you can be sure the reticle is off.
Our M3 dial provides 1 MOA adjustment for fast dialing and center of mass target acquisition in less than 1 turn of BDC. Our M2 dial utilizes 1/2 MOA adjustment increments for extreme ranges of BDC with precise target acquisition.
LR/T 4.5-14X40MM TARGET
15

LENS SYSTEM Leupold Xtended Twilight Lens System delivers superior resolution across the visual field in low-light situations. USER PARALLAX ADJUSTMENT CONTROL Side focus parallax adjustment can be used from any shooting position to remove parallax and deliver absolutely crisp focus essential for precise shot placement. 30MM MAINTUBE For a greater range of windage and elevation adjustment. NIGHT VISION COMPATIBLE The lowest two illumination settings on Mark 4 Illuminated riflescopes are compatible with night vision devices.
FLIP-OPEN LENS COVERS Standard issue with Mark 4 LR/T riflescopes. WINDAGE AND ELEVATION ADJUSTMENTS Knurled, finger-adjustable click windage and elevation dials. All Leupold Mark 4 adjustment dials utilize durable, dependable wear and corrosion proof parts and a precision anti-backlash mechanism to provide positive windage and elevation adjustment under the harshest conditions. Furthermore, these dials include a dual erector spring and incorporate a revolution counter for absolute precision. 3RD GENERATION ILLUMINATED RETICLES Off positions between on positions with positive clicks and a hard stop at the lowest off position.
LR/T 4.5-14X50MM M1
(ILLUM. RETICLE ALSO AVAILABLE)
LR/T 6.5-20X50MM M1
LR/T MODELS
4.5-14x50mm M1
RETICLE
PART NO.
Duplex 54660 Mil Dot 54560 Mil Dot 67955 TMR 60005 TMR 67965 6.5-20x50mm M1 Mil Dot 54680 Mil Dot 67970 TMR 60080 TMR 67975 8.5-25x50mm M1 Mil Dot 54690 Mil Dot 67980 TMR 60070 TMR 67985 113092 8.5-25x50mm M5 NEW TMR For reticles see pg 44-49. For adjustment dials see pg 51. Matte Black finish on all models.
M5 windage and elevation adjustment dials feature audible, tactile 1/10-MIL clicks over an 85-MOA adjustment range for both windage and elevation.
LR/T 8.5-25X50MM M1

Our third-generation illumination is right at home on our line of tactical scopes. Eight intensity levels match for your ambient light conditions. Two intensity settings are also compatible with night-vision equipment. A new off position between each intensity setting lets you easily turn off illumination and snap it back on right where you left it. No more cycling through all the settings to find where you left it. There is also a hard stop at the end of the dial, so you can be sure the reticle is off.
42S YD 007 707 (KUNAR PROVINCE, AFGHANISTAN)

A U.S. Army infantry team leader with his M-39 enhanced marksman rifle provides security during a combat patrol in the Konar province of Afghanistan. Pictured: mark 4 lr/t 3.5-10x40 m3 on an ebr.
17
THE MARK 4 HAMR (HIGH ACCURACY MULTI-RANGE) is a tough, compact, combatready telescopic sight designed for bright daylight, low light and night use. Etched glass reticle patterns provide traditional, precise distance marksmanship with close-in aiming speed and are visible with or without illumination. The addition of the attached Leupold DeltaPoint red dot sight vastly increases versatility by providing instant target acquisition when needed. Designed for use with any AR-15 variant, every aspect of the Mark 4 HAMR and DeltaPoint reflex sight combination is engineered for speed, accuracy, and simplicity.
MARK 4 HAMR
MARK 4 HAMR
COMBAT-READY Designed for speed, precision and simplicity and durably constructed for use with any AR-15 variant. BALLISTICALLY MATCHED ETCHED GLASS RETICLES Provide traditional, precise distance marksmanship with close-in aiming speed and are visible with or without illumination. Ballistically matched, for the most popular tactical rounds and weapon systems. The etched reticle utilized on the HAMR ensures optimized performance even in the event of complete battery depletion. LENS SYSTEM Leupold Balance Coat Lens System delivers superior resolution across the visual field in low-light situations. FULLY ILLUMIATED RETICLES For precise shot placement in bright daylight, low light and at night. RUGGED, WATERPROOF CONSTRUCTION Guaranteed to be 100 percent waterproof/fog proof, and is designed to withstand the rigors of the modern battlefield.
The CM-R2 was designed to allow users to successfully estimate range and engage targets with greater flexibility than generally possible with other reticle styles. Its 0.5 MOA dot surrounded by a 5.0 MOA horseshoe make it ideal for 3-gun competition and close quarter battle scenarios. The hash marks on the horizontal stadia can be used for leading targets moving at 5, 10, and 15 mph respectively.
MARK 4 HAMR 4X24MM WITH DELTAPOINT
NEW CM-R2
MARK 4 HAMR MODELS

4x24mm Matte Black finish 4x24mm w/ Delta Point Matte Black finish
RETICLE
NEW CM-R2
PART NO.
110995
NEW CM-R2 / 7.5 MOA Delta 111412
19
MR/T RIFLESCOPES
With the dust literally still settling from 9/11, the USMC knew it was about to face a different kind of fight. It needed a different kind of optic. Within 60 days, the MR/T was rolling off the line at Leupold, ready to deploy.
38S LB 610 950 (KHALDIYA, IRAQ)

A designated marksman provides security in a search for weapons during a dust storm. Pictured: mark 4 lr/t 2.5-8x36mm m2 on a mark 12, mod 0
MR/T RIFLESCOPES
LENS SYSTEM Leupold Xtended Twilight Lens System delivers superior resolution across the visual field in low-light situations. 30MM MAINTUBE For a greater range of windage and elevation adjustment. RUGGED, WATERPROOF CONSTRUCTION Guaranteed to be 100 percent waterproof/fog proof, and is designed to withstand the rigors of the modern battlefield. WINDAGE AND ELEVATION ADJUSTMENTS Knurled, finger-adjustable click windage and elevation dials. All Leupold Mark 4 adjustment dials utilize durable, dependable wear and corrosion proof parts and a precision antibacklash mechanism to provide positive windage and elevation adjustment under the harshest conditions. Furthermore, these dials incorporate a revolution counter for absolute precision and a dual erector spring. FLIP-OPEN LENS COVERS Standard issue with Mark 4 LR/T riflescopes. FULLY ILLUMINATED RETICLES The Leupold Mil Dot and TMR reticles available in select models for precise shot placement in low light.
MR/T 1.5-5X20MM (ONE-INCH MAINTUBE)
MR/T 1.5-5X20MM M2 ILLUM. RETICLE
MR/T 2.5-8X36MM M1
MR/T MODELS
1.5-5x20mm (one-inch) 1.5-5x20mm M2
RETICLE
PART NO.
Special Purpose 59100 Special Purpose 67905 110180 NEW CM-R2 Mil Dot 67910 2.5-8x36mm M1 TMR 60210 TMR 67915 Mil Dot 67920 2.5-8x36mm M2 TMR 60180 TMR 67925 Illuminated Reticle - For reticles see pg 44-49. For adjustment dials see pg 51. Matte Black finish on all models.
MR/T 2.5-8X36MM M2
21
Accurizing an AR just got easy. The Mark AR Series is offered in a myriad of models with multiple reticle options, including models with laserengraved 55-grain 5.56 BDC dials. Other BDC dials available through the Leupold Custom Shop.
MARK AR
LENS SYSTEM Leupolds proprietary Multicoat 4 lens system for superior low-light brightness and fine detail resolution. LASER ENGRAVED BDC DIAL For 55-grain .223 ballistics. (Except for 1.5-4x20) Other BDC dials available through our Custom Shop. EYEPIECE FOCUS DESIGN Lockable, fast-focus eyepiece. POWER SELECTOR DIAL Large dial has a tactile power indicator with aggressive knurling to provide a sure grip in all conditions. LEGENDARY LEUPOLD RUGGEDNESS The Mark AR riflescopes must pass rigorous testing. WATERPROOF/FOG PROOF TECHNOLOGY Leupolds proprietary nitrogen sealing process. MARK AR 3-9X40 The Mark AR 3-9x40mm is geared for those who hunt with black rifles, with a halfheight elevation turret and standard windage turret so it will fit in a scabbard. CUSTOM SHOP SERVICEABLE Customize your Mark AR riflescope, including custom BDC dials to fit your loads, available through the Leupold Custom Shop. FULL LIFETIME GUARANTEE Mark AR riflescopes are covered by the same Full Lifetime Guarantee as Mark 4 riflescopes. WINDAGE AND ELEVATION ADJUSTMENTS Removable threaded covers prevent adjustments from accidentally changing and include a dual erector spring. Select models include -MOA or -MOA click T1 or T2 adjustments.
MARK AR 1.5-4X20MM
(SAME AS VX-3 ADJUSTMENT)
(T2 ELEVATION DIAL WITH LOW PROFILE FINGER CLICK WINDAGE ADJUSTMENT)
MARK AR 3-9X40MM T2
MARK AR 4-12X40MM ADJ. OBJ. T2
MARK AR 6-18X40MM ADJ. OBJ. T1
MARK AR MODELS
1.5-4x20mm 3-9x40mm T2
RETICLE
PART NO.
MARK AR
Leupolds Integrated Mounting Systems (IMS) raise the scope approximately 1.14 inches and provide operators standard eye relief on AR rifle platforms. See page 40.
Duplex 67170 Duplex 67165 Mil Dot 67160 4-12x40mm Adj. Obj. T2 Fine Duplex 67390 Mil Dot 67395 6-18x40mm Adj. Obj. T1 Fine Duplex 67400 Mil Dot 67405 Matte Black finish on all models. T1= MOA, T2 = MOA For reticles see pg 44-49. For adjustment dials see pg 51.
42S VC 079 219 (WARDAK PROVINCE, AFGHANISTAN)

U.S. soldiers prepare to engage enemy combatants in Chak district, Wardak province, Afghanistan. pictured: mark 4 lr/t 10x40mm m3 on an ebr.
23
12T VL 180 640 (OGDEN, UTAH)

Lt. Chris Simmons and Corp. Rob Wilkinson of the Utah Department of Public Safetys Special Emergency Response Team run dynamic entry training drills.
PRISMATIC
Rapid target acquisition and an etched-glass Circle Plex reticle visible with or without its removable illumination module makes the Prismatic at home in any high-speed, close-quarters situation.
PRISMATIC
WIDE FIELD OF VIEW More generous than competitive red dot sights, the 1x14mm Prismatic is on target faster. REMOVABLE ILLUM. MODULE The reticle is visible with or without the Illumination Module. Attach it to illuminate the reticle in red, detach it and you can still use the etched-glass reticle. Meets military specs for waterproofing and durability. TRUE 1X OPTICAL SYSTEM Allows the shooter to have both eyes open for superior depth perception and provides wide field of view for faster target acquisition with excellent short range engagement properties. WINDAGE AND ELEVATION ADJUSTMENT DIALS Finger click -MOA adjustments. MOUNTING OPTIONS Compatible with the A.R.M.S. #22-34mm Throw Lever Rings Base and Spacer System, and conventional 30mm rings. INTEGRATED BASE SYSTEM Includes different height mounting spacers to work on any type of weapons platform. UNSURPASSED SCRATCH RESISTANCE Exterior lens surfaces are treated with DiamondCoat 2 for increased light transmission and abrasion resistance that far exceeds military standards. FOCUSING EYEPIECE The true focusing eyepiece means the 1x14mm Prismatic can be adjusted and used by anyone. LEUPOLD CIRCLE PLEX RETICLE Unlike fuzzy red dot sights, the etched-glass Circle Plex is sharp and defined, illuminated or not, and can be used to estimate range.
PRISMATIC 1X14MM
The Prismatic can be mounted using a ratchet over the outside or inside the mounting screws handle. PRISMATIC MODEL
1x14mm
RETICLE
Circle Plex
PART NO.
63300
Illuminated Reticle - For reticles see pg 44-49. For adjustment dials see pg 51. Matte Black finish on all models.
25
MARK 4 CQ/T
42S YD 007 707 (KUNAR PROVINCE, AFGHANISTAN)

Under fire, a U.S. Army platoon sergeant provides security and humanitarian assistance to the Afghan people of the Kunar province.
CQ/T FEATURES
TRUE 1X SETTING Non-magnifying, illuminated sight for rapid target acquisition with both eyes open at extreme close range. 2X OR 3X SETTINGS Additional power to accurately engage targets at medium ranges. WINDAGE AND ELEVATION ADJ. DIALS -MOA cross slot adjustments. TEN RETICLE ILLUMINATION SETTINGS Matches any light conditions; two red, lowintensity, night vision compatible settings. AA BATTERY Commonly found, easily replaced without tools, it provides 600+ hours of power at medium setting. Additional Battery Pack Part no. 52644 INTEGRATED MIL-STD-1913 RAIL MOUNT CROSS-SLOTS Easily attach a variety of accessories to your CQ/T. MARK 4 CQ/T ARMS THROW LEVER MOUNT A removable mount with dependable, repeatable accuracy. See page 39. LEUPOLD CIRCLE DOT RETICLE A bold red aiming point with built-in range estimation. FLIP-OPEN LENS COVER Standard issue with the Mark 4 CQ/T riflescope.
CQ/T
NEW CM-R2.
CQ/T MODEL
1-3x14mm 1-3x14mm incl. carrying handle mount Matte Black finish. Illuminated Reticle
RETICLE
Circle Dot NEW CM-R
2
PART NO.
67670 67675
CQ/T 1-3X14MM
27
The Leupold DeltaPoint is built on the principle that action is superior to reaction. Sensors discern any movement of the sight then automatically activate the illumination and continuously sample current lighting conditions to provide optimal reticle intensity, regardless of changing lighting conditions.
DELTAPOINT
DELTAPOINT
MOTION ACTIVATED Patent pending motion sensor detects the slightest movement and instantly activates the illumination. AUTO BRIGHTNESS SENSOR By continuously sampling current lighting conditions, optimal reticle intensity is maintained through dynamic light conditions. Adjustment range. RETICLE OPTIONS Choice of dot or delta reticle. DELTAPOINT SIGHT
Cross Slot Mount All Mounts Matte Black finish on all models.
SCRATCH RESISTANT DiamondCoat lens coverings provide abrasion resistance to withstand the rigors of the modern battlefield. ASPHERIC LENS SYSTEM 20% larger viewing window than comparable sights for greater field of view. The edges are sharper and there is a bigger, more usable field of view.
MAGNESIUM HOUSING Lightweight and durable housing protects the lens. ADJUSTMENT RANGE 60-MOA adjustment range for both windage and elevation. MOUNTING OPTIONS Variety of mounting options to accommodate handguns, shotguns or AR-style rifles are included.
DeltaPoint Mounting Kit
DOT
3.5 MOA Dot 7.5 MOA Delta 3.5 MOA Dot 7.5 MOA Delta
PART NO.
67435 59665 66135 65930
DeltaPoint sight window shown with delta reticle. MOUNT BASES W/ DOVETAILS
Mount Base 1B / Dovetail 1A Mount Base 2B / Dovetail 2A Mount Base 3B / Dovetail 3A Mount Base 4B / Dovetail 4A Mount Base 5B / Dovetail 5A Mount Base 6B / Dovetail 6A Mount Base 7B / Dovetail 7A Mount Base 8B / Dovetail 8A Mount Base 9B / Dovetail 9A Mount Base 10B / Insert10A
HANDGUN MODEL
Beretta 92/96 /90-TWO/Taurus PT99 1911 Standard Glock with 1.18 wide slide (17/22/23/26 etc.) Sig Sauer P226 Springfield XD CZ 75 HK USP Kimber Fixed/Adjustable Smith & Wesson M&P Smith & Wesson Classic
29
42S WB 850 900 (CAMP SALERNO, AFGHANISTAN)

TACTICAL SPOTTING SCOPES
a soldier makes notes during training on the XM110 Semi-automatic Sniper System.
MARK 4 TACTICAL SPOTTING SCOPES

LENS SYSTEM Xtended Twilight lens system provides the details of low-light scenes in greater definition and luminance than any other tactical optic in the world. FOLDED LIGHT PATH TECHNOLOGY Provides powerful magnification in a lightweight, compact design (12.4" long, just 37 oz.). RANGE CALCULATION AT ALL POWER SETTINGS With the reticle located in the front focal plane, the reticle magnifies with the image, so you can calculate range at any power setting. UNIVERSAL MOUNT -20 Thread tripod attachment is standard.
DIGITAL CAMERA COMPATIBLE Ideal for surveillance. Capture what you see on nearly any digital camera with Leupolds digital camera adapter.
The Leupold Xtended Twilight Lens System uses Leupolds index matched glass with wavewave length specific lens coatings designed to optimize the transmission of low-light wavelengths. While maintaining color balanced light transmission across the visual spectrum, unique coatings place extra emphasis on blue/violet spectrum light transmission. The result is a scope that provides the details of low-light scenes in greater definition and luminance than any other tactical optic in the world.
TACTICAL SPOTTING SCOPE

12-40x60mm
RETICLE
PART NO.
53756 60040 65145 67185 67190 110183 110182 110825 110826
MARK 4 20-60X80MM
MARK 4 12-40X60MM
Mil Dot TMR P4 NEW H-32 NEW H-36 12-40x60mm NEW H-32 Inverted NEW H-36 20-60x80mm NEW Mil Dot NEW TMR For reticles see pg 44-49. For adjustment dials see pg 51. Matte Black finish on all models.
31
MARK 4 TACTICAL INVERTED SPOTTING SCOPES

Operators are often forced to adapt to unique situations in the battlefield environment. The series of Mark 4 Inverted Spotting Scopes is a result of listening to spotters and addressing their needs. When cover is in short supply, spotters will flip their scope in order to spot with their head below the optic. With standard TMR or Mil Dot reticles, this is no problem. However, with the ever-increasing deploy deployment of Horus reticles, Leupold recognized the need to invert the spotting scope for its most effective use, allowing spotters to observe without being observed.
TACTICAL SPOTTING SCOPES
INVERTED TACTICAL SPOTTING SCOPES

Mark 4 12-40x60mm Matte Black finish.
RETICLE
H-32 H-36
PART NO.
110183 110182
Mounting System shown is the LaRue SPOTR LT-666. Priority availabilty to Military and Law Enforcement. For more information, please call 512-259-1585. Accessories sold separately.
Leupold Golden Ring spotting scopes provide superior optics in a compact platform that is lightweight enough to take into any situation and rugged enough to endure the harshest conditions. Multi-coated lenses provide outstanding brightness and clarity. Available in multiple configurations for a wide variety of uses.
GOLDEN RING SPOTTING SCOPES

LENS SYSTEMS SIDE FOCUS Compact models feature a unique side focus dial. HD LENS The 12-40x60mm HD spotting scope has a unique calciumfluoride objective lens that provides for extremely detailed resolution at 40x. RUGGED PERFORMANCE Leupold Golden Ring optics have proven their ruggedness in the factory and the field. EYE RELIEF Generous eye relief and fold-down eyecups for use with eyeglasses or tactical eye wear. WATERPROOF / FOG PROOF TECHNOLOGY Leupolds proprietary Nitrogen-fill process. DIGITAL CAMERA COMPATIBLE The 12-40x60mm can be used with nearly any digital camera and our digital camera adapter.
Index Matched Lens System on the 12-40x60mm HD spotting scope. Xtended Twilight lens system on the 12-40x60mm spotting scope. Multicoat 4 lens coatings on the 15-30x50mm Compact and standard multicoat on the 10-20x40mm Compact spotting scopes.
10-20X40MM COMPACT
15-30X50MM COMPACT (SCOPES NOT SHOWN TO SCALE)
LEUPOLD GOLDEN RING 12-40X60MM HD SPOTTING SCOPE KIT This valuable kit includes the HD spotting scope; a Leupold compact, adjustable tripod; a window mount for your vehicle; and a digital camera adapter; all in a hard-side, reinforced case with custom padding. Part no. 61070 GOLDEN RING MODELS PART NO.
10-20x40mm Compact 15-30x50mm Compact 12-40x60mm 12-40x60mm HD Brown finish on all models. 61080 61090 61050 61060
12-40X60MM HD
LEUPOLD GOLDEN RING 15-30X50MM COMPACT SPOTTING SCOPE KIT Includes the spotting scope, quick detaching shoulder strap, custom padded belt case, lens covers, a specially designed mounting adapter for -20 threaded mounts, a sturdy tabletop tripod, and hard-side carrying case. Part no. 61100
INCLUDES SOFT-SIDE CASE The protective case remains on the scope during use. Replacement 12-40x60mm spotting scope soft case. Part no. 53715
33
The Leupold Tactical Binocular is a high-performance phase-coated bino with a durable, shock-absorbing coyote brown armor. Choose from a Leupold Mil Dot or Tactical Milling reticle. Either can be rotated for accurate ranging in off-camber positions such as when leaning around hard cover.
TACTICAL BINOCULARS
LENS SYSTEM Fully multi-coated lenses enhance brightness and contrast, and optimize resolution.
MIL DOT
ADJUSTABLE RETICLE The reticle can be rotated, so users with varying interpupillary distances may view the reticle horizontally, and so you can more accurately range an object thats not perfectly horizontal or vertical. GENEROUS EYE RELIEF AND TWIST-UP EYECUPS These binoculars are easy to use with eyeglasses or tactical eye protection.
ERGONOMIC, RUGGED, WATERPROOF DESIGN Well-balanced and easy to grip, even with wet hands, theyre built rugged and tested to ensure 100 percent waterproof integrity. WARRANTY FOR LIFE Covered by the Leupold Limited Lifetime Warranty. TACTICAL MILLING RETICLE Expands on existing Mil Dot reticles, using various sized and spaced hash marks on the stadia for increased ranging precision, accuracy, and quick one-meter range estimating reference points. All Mil Dot calculations are TMR compatible. PHASE COATED BAK4 / BK7 PRISMS These virtually eliminate diffraction for additional brightness and clarity in all conditions.
TMR
10X50MM PATROL (ALSO AVAILABLE WITH RETICLE)
TACTICAL BINOCULARS
7X42MM CASCADES
TACTICAL MODELS
10x50mm Patrol 10x50mm Military
RETICLE
No Reticle Mil Dot TMR
PART NO.
59120 59125 59130
Katmai Binoculars 6x32mm 56410 8x32mm 56420 10x32mm 56430 BX-2 Cascades Binoculars 7x42mm 111736 8x42mm 111738 10x42mm 111741 Coyote Brown finish on 50mm models. Black finish on all Katmai & Cascades
Products bearing the Synergy Built designation are the result of a dedicated team of 21 Leupold designers, engineers, production specialists and quality control inspectors working together to completely re-think, re-design, re-engineer and re-produce a line of binoculars and spotting scopes that is unlike any other available.
10X32MM KATMAI
38R MV 140 680 (NAJAF, IRAQ)

A Soldier looks through A binocular at smoke rising near the An Najaf cemetery in Iraq.
35
The RX Series unlike most other rangefinders arent glorified tape measures. True Ballistic Range solves complicated uphill or downhill shots, giving you a much more precise measurement than straight line distance.
RX SERIES
TRUE BALLISTIC RANGE Gives you seven ballistics groups to choose from based on your rifles caliber and bullet weight, then factors incline and line-of-sight range for True Ballistic Range. Range is then displayed as a mil holdover aim point, an MIL/MOA adjustment, or the equivalent horizontal distance. INCLINOMETER Provides tilt corrected ballistic calculations for accurate shots up or downhill. CLICKING FAST-FOCUS EYEPIECE Click-adjusting diopter focus ensures precision. RX-1000I FEATURES >>NEW DNA Now with our proprietary Digitally eNhanced Accuracy, DNA fixes one of the biggest challenges for rangefinders: accuracy. You get an unbelievably bright, crystal-clear target image unlike any other rangefinder available. The result is accurate readings in poor light conditions or when ranging targets with dark backgrounds. COMPACT AND LIGHTWEIGHT The ergonomic body is easy to grip in any condition. An incredibly rugged aluminum housing provides brute strength without excessive weight. BRILLIANT IMAGE QUALITY The incredibly bright OLED display dramatically increases light transmission by up to 3x higher than LCD models. RX-1000i includes all general RX Series features.
RX SERIES & RANGEFINDERS
RX-1000i/TBR WITH DNA
Dial in your RX to one of seven TBR ballistics settings for the rifle for incredible accuracy. TBR is effective to 800 yards for most rifle cartridges. The RX has four True Ballistic Range readouts: MOA: Minutes of angle of elevation to adjust your riflescope for precise zero. HOLD: Number of inches or centimeters to hold over or under aim point on target. MIL: For use with tactical or Mil Dot reticles (RX-1000i only). BAS: The Leupold-exclusive Ballistics Aiming System provides equivalent horizontal range for which you should hold for use with your bullets ballistics.
RX-IV
RANGEFINDER MODELS/FEATURES
Finish & Part Number Black Black/Gray Mossy Oak Brush Camo Mossy Oak Break-Up Camo RX-IV 61470 8x 1370 640 Yes Yes Yes Yes Yds/M/Ft Yes Backlit LCD 12 oz 4.7x3.5x2 Waterproof
RX-1000i
w/ DNA
RX-1000i
w/ TBR
RX-750 TBR 59520 59525
RX-600 59515
66495 6x 910 460 No No No No Yds/M Yes Illuminated 7.8 oz 3.8x2.8x1.3 Weatherproof
112178 112179 6x 910 460 No No No No Yds/M Yes Illuminated 7.8 oz 3.8x2.8x1.3 Weatherproof
Magnification Max Range Reflective Target (M) Max Range Live Target (M) Inclinometer TBR (True Ballistic Range) Compass w/ Declination Setting Thermometer C & F Yds/Ft/Meters Mode Scan Mode Display Weight Dimension (inches) Weatherproof/Waterproof
6x 6x 690 550 460 370 Yes No Yes No No No No No Yds/M Yds/M Yes Yes LCD LCD 6.8 oz 6.8 oz 4x2.75x1.5 4x2.75x1.5 Weatherproof Weatherproof
The RX-1000i with DNA (Digitally eNhanced Accuracy) provides pinpoint laser ranging resolution to within 1/10 of yard - against all background colors and shapes. Compact. Bright. Leupold tough. Put it to your eye to see what ranging at the speed and accuracy of Leupold can mean to successful target acquisition.
Fueled by an exclusive new rangefinder engine technology, three years in the making, the RX-1000i with DNA (Digitally eNhanced Accuracy) delivers unmatched target discretion and precision ranging on the longest shots in the toughest conditions resolution to within 1/10 of a yard against all background colors and shapes. In the life-or-death world of tactical operations, distance measurements cant be educated guesses. Rely on the RX-1000i with DNA from Leupold.
RX-600
RX-750 TBR
TRUE BALLISTIC RANGE

Aim as if the target is 335 yards away.
RX-1000i/TBR WITH DNA
MULTIPLE BALLISTIC SETTINGS RX rangefinders are the only rangefinders to provide accurate aiming information matched to the performance of your rifle. By calculating the incline, line of sight range to the target, and a projectiles ballistics, your RX provides the correct equivalent horizontal distance for precise shooting on an incline. In other words, aim using the True Ballistic Range, not the line of sight range. You can also get this data as an MOA adjustment or a holdover point. With practice, long distance/steep angle shooting will become second nature. Dial in your RX to one of seven TBR ballistics settings designed to match the cartridge you are shooting. 37
MXc SERIES
COMPACTNESS Compact, yet infinitely useful. Available in a range of preconfigured models. All MXc flashlights feature a True White LED assembly, TIR lens by a precision reflector and protected by a sapphire window for natural, warm illumination. Waterproof to 4 atmospheres. SAPPHIRE WINDOW Resists scratching to provide maximum light transmission. BATTERY Runs on common CR-123A batteries (included). RUGGED AND WATERPROOF Built of machined T-6061 aerospace-grade aluminum with hard anodizing that exceeds military specifications. A double O-ring design provides waterproof protection. ALUMINA ACCESSORIES 20mm Alumina accessories, including red and blue filters, to adapt to ever changing situations. TOTAL INTERNAL REFLECTENCE LENS (TIR) Advantageous in collecting light, creating a more concentrated beam, providing a better source of light than the traditional metallic mirror in a smaller package.
MXc-111
MXc-221
MXc-321
MXc-421
MXc-521
MXc-621
CONFIG. MXc-111
COMPONENTS
MXc-100 Bezel MXc-010 Maintube MXc-001 Tail Switch MXc-200 Bezel MXc-020 Maintube MXc-001 Tail Switch MXc-300 Bezel MXc-010 Maintube MXc-020 Maintube MXc-001 Tail Switch MXc-100 Bezel MXc-020 Maintube MXc-001 Tail Switch MXc-100 Bezel MXc-010 Maintube MXc-020 Maintube MXc-001 Tail Switch MXc-100 Bezel MXc-010 Maintube MXc-020 Maintube MXc-001 Tail Switch Red and Blue Alumina Filers
LAMP
True White LED
MODE
Single
LUMENS
30 (1-Cell)
RUNTIME
6 hrs
WT.
2.4 oz
LTH.
3.5"
MXc-221
True White LED
10 (Low) 2-cell Multi-Mode 40 (High) 2-Cell 10 (Low) 1-Cell 70 (High) 1-Cell 10 (Low) 2-Cell 70 (High) 2-Cell 10 (Low) 2-Cell Multi-Mode 120 (High) 2-Cell 120 (strobe) 2-Cell 10 (Low) 1-Cell 120 (High) 1-Cell 10 (Low) 2-Cell 120 (High) 2-Cell 10 (Low) 1-Cell 120 (High) 1-Cell 40 (SOS) 1-Cell 10 (Low) 2-Cell 120 (High) 2-Cell 40 (SOS) 2-Cell
33 hrs 2.7 oz 10 hrs 20 hrs 2 hrs 33 hrs 5 hrs 33 hrs 1.6 hrs 3 hrs 20 hrs .5 hrs 33 hrs 1.6 hrs 20 hrs .5 hrs 8 hrs 33 hrs 1.6 hrs 13 hrs 2.8 oz 5" 4.8"
MXc-321
True White LED
Multi-Mode
2.8 oz
4.8"
MXC SERIES FLASHLIGHTS
MXc-421
True White LED
MXc Preconfigured Modular Flashlights follow a simple, three-digit naming convention. The first digit in the name represents the Bezel, the second represents the Maintube, and the third is the Tail Switch. Every component of the preconfigured models retains its modularity and is completely compatible with other products within their respective lines.
MXc-521
True White LED
Multi-Mode
2.7 oz
4.8"
MXc-621
True White LED
Multi-Mode
2.7 oz
4.8"
MXC-400 BEZEL MXC-020 MAINTUBE MXC-001 TAILSWITCH
MXC-421
MARK 4 BASES ARE ALL NOW 6-48 AND 8-40 SCREW ADAPTABLE
MARK 4 TACTICAL MOUNTS
PRW RINGS (PERMANENT CROSS-SLOT FORMAT)
QRW (QUICK RELEASE CROSS-SLOT FORMAT)
The most accurate rifle in the world combined with Leupolds most superior optic can be rendered meaningless if the mounting system that marries the two cant deliver rock-solid dependability. Leupold Tactical Mounting Systems are engineered to be as rugged and reliable as the Leupold scopes theyre intended to secure. Weve also created mounts for
MARK 4 TACTICAL MOUNTS Mark 4 Rem 700 2-pc (8-40 Adaptable) Mark 4 Rem 700 SA 1-pc (8-40 Adaptable) Mark 4 Rem 700 LA/Super Mag Long Range 1-pc (8-40 Adaptable) Mark 4 Win 70 2-pc (8-40 Adaptable) Mark 4 Win 70 SA Long Range 1-pc (8-40 Adaptable) Mark 4 Win 70 LA Long Range 1-pc (8-40 Adaptable) Mark 4 Savage 10/110 Round Rcvr 2-pc (8-40 Adaptable) Mark 4 AR15/M16 Handle Mount Mark 4 CQ/T Flat Top Rail Mark 4 CQ/T Throw Lever Mount MARK 4 TACTICAL RINGS Mark 4 34mm High Mark 4 34mm Super High Mark 4 30mm Medium Mark 4 30mm Medium (Aluminum) Mark 4 30mm High Mark 4 30mm High (Aluminum) Mark 4 30mm Super High Mark 4 30mm Super High Mark 4 1-inch Medium Mark 4 1-inch Medium (Aluminum) Mark 4 1-inch Super High Mark 4 1-inch Super High Cross Slot Medium MATTE FINISH ON ALL PARTS PART NO. 59230 59235 65970 59240 59255 59250 59245 52136 54265 57506 PART NO. 59320 59310 61049 57398 60699 57291 60750 57555 60595 57524 60019 57526 49965
6-48
8-40
The 8-40 shoulder screws are slightly stronger than the standard 6-48 screws. 8-40 screws are 41% stronger for this application than the 6-48s. All bases can be applied exactly the same as they have been in the past using the included 6-48 shoulder screw. These bases will also fit Winchester PBR, Remington SuperMagnum, HS Precision and other 8-40 rifles without modification.
This system employs a slot and spline design, and comes in 1-Piece and 2-Piece configurations. Mark 4 bases accept Mark 4 rings, cross-slot rings, and QRW / PRW rings. Bases have a -degree slope for long-range shooting applications. Mark 4 Super High rings specifically designed for use with flat top configurations. Mark 4 bases are available for nearly every long-range tactical weapon in use, including: Remington 700, 721, and 725 long and short action models Winchester Model 70, 670, 770, and 70A The Savage 110 through 116 The Savage 10 through 16 The Ruger M77
Steel rings that are based on the proven cross-slot design. Compatible with the Leupold QRW bases or any other Picatinny-style mounting rails.
Steel detachable accuracy mounts that are based on the familiar cross-slot design. Use the QRW mounts to achieve detachable accuracy.
MARK 4 CQ/T ARMS THROW LEVER MOUNT
MARK 4 AR-15/M16 HANDLE MOUNT
52136
57506
MOUNTING SYSTEMS
nearly every tactical rifle available, from boltactions to semi-autos and for every end use.
LEUPOLD MARK 4 ALUMINUM RINGS
Get a precise and repeatable zero every time with this quickdetaching mount for the Leupold Mark 4 CQ/T optical sight. With rugged, all-metal construction and a black, anti-glare matte finish, its ready to handle any mission. Compatible with cross slots/Picatinny-style rails.
Securely attach your scope to any M16 variant with a carrying handle. Fit it into the sight channel of the carrying handle. Delivers rock-solid stability for repeatable accuracy.
MARK 4 CQ/T FLAT TOP MOUNTING BRACKET
54265
In the field, you count every ounce of weight, because youve got to carry it. Mark 4 Aluminum mounts are machined from a single piece of aircraft-grade aluminum, so theyre incredibly strong, yet lightweight.
Compatible with any Picatinnystyle mounting rail, secure your Mark 4 CQ/T scope using this specially designed mounting bracket.
For ordering information on the PRW, QR, AND ORW mounts, go to: www.leupold.com/tactical/products/mounting-systems-and-accessories
39
MARK 2 IMS 30MM The Leupold Integral Mounting Systems (IMS) family quickly and easily eliminates the two most common issues faced when mounting standard riflescopes to AR-style rifles; scope height and eye relief. From the Mark 1 to the Mark 4, each aluminum IMS MARK 2 AND MARK 4 IMS RAILS
Mark 2 Integral Rings attach directly to the Mil Spec/Picatinny rails using 1/2 keeper nuts, providing an affordable and easyto-use mounting solution which eliminates the need for separate scope rings or risers.
MARK 4 IMS RAIL
MARK 1
INTEGRAL MOUNTING SYSTEMS
cantilever design mounts directly to the firearms Mil-Spec 1913/Picatinny to raise the scope and push it forward, eliminating the need for risers or specialized
MODEL HEIGHT (in.) 1.42 1.42 1.42 1.42 1.42 1.42 1.42 1.42 1.5 WEIGHT (oz.) 3.14 4.54 6.38 6.54 2.18 1.98 3.48 3.58 8.66 RING DIAMETER NA NA 1" 30mm NA NA 1" 30mm 34mm RING SPACING NA NA 3.41 3.41 NA NA 2.8 2.8 3.89
The Mark 4 line takes versatility to the extreme, providing modular components for interchangeable adaptability. Use the Mark 4 Base in conjunction with the 20-MOA Integral Rail insert, 1 Integral Ring insert, 30mm Integral Ring insert, or to securely attach the Leupold Mark 4 CQ/T or H.A.M.R. directly to the firearm. 1/4-32 screws hold any of the inserts or optics to the Mark 4 Base with rock-solid dependability, while allowing additional extension for various weapons system/optic combinations.
The Mark 1 Rail slides into place and the living hinge easily clamps to the rifle with two Torx T-15 screws, providing an affordable and easy-to-use alternative to risers which do not push the scope forward.
MARK 4 1 IMS MOUNT
MARK 8
PART NO. 110288 110289 110290 110291 110292 110293 110294 110295 110296
optics with shortened eye relief.
Mark 1 IMS Integral Rail Mount Mark 2 IMS Integral Rail Mount Mark 2 IMS 1" Integral Mounting System Mark 2 IMS 30mm Integral Mounting System Mark 4 IMS Integral Base Mark 4 IMS 20-MOA Integral Rail Insert Mark 4 IMS 1" Integral Ring Insert Mark 4 IMS 30mm Integral Ring Insert Mark 8 IMS 34mm Mounting System MATTE FINISH ON ALL PARTS
Compatible with Leupold QRW/ PRW rings Eliminates the need for super high rings Mark 4 features a tapered design to provide additional 20 MOA for long range shooting.
Designed and manufactured to the exact standards requested by Americas elite warfighters, the Mark 8 provides optimal eye relief and mounting height for 34mm optics on the AR firearm platform. Engineered from the ground up to exceed the demands of worlds top operators, the Mark 8 provides ideal scope placement with or without night vision devices.
MARK AR
MR/T Mark 4 3.5-10x40mm LR/T M1, M2 & M3 (& Illum. Reticle, & Front Focal)
LR/T
ER/T
MARK AR
MR/T Mark 4 3.5-10x40mm LR/T M1, M2 & M3 (& Illum. Reticle, & Front Focal)
LR/T
ER/T
Mark 4 4.5-14x50mm LR/T M1 (& Illuminated Reticle, & Metric)
Mark 4 6.5-20x50mm LR/T M1 (& Illuminated Reticle)
Mark 4 1.5-5x20mm MR/T M2 Illuminated Reticle
Mark 4 1.5-5x20mm MR/T M2 Illuminated Reticle
SCOPE MODEL
Mark 4 6.5-20x50mm ER/T M1 Front Focal
Mark AR 3-9x40mm T2 (& Tactical Hunter)
SCOPE MODEL
Mark 4 6.5-20x50mm ER/T M1 Front Focal 6.5

H30 H30 H30 H30 H30 H30 H30 H30 H30 H30 H30 H30 H30 H30 H30 H30 H30 H30 H30 H30 H30 H30 H30 H30 H30 H30 H30 H30 H30 H30 H30 H30 H30 H30 H30 H30 H30 H30 H30 H30 H30
Pat: Yes--the quick detach. Retain TACTICAL BASE FIT & RING HEIGHT qr/w style bases and the pr/w INFORMATION rings and use the space from the removal of quick detach to expand on the 8-40 base story and/or the IMS mount story.
1x14mm Tactical Prismatic Mark AR 1.5-4x20mm NEW Products Shown In Red FIREARM BASE PART NO. NA 5.5 Base Model Gloss

TACTICAL BASE FIT & RING HEIGHT INFORMATION

FIREARM Base Model BASE PART NO. Gloss Matte Savage 110 through 116 (Left Hand, Long Action, Heavy Barrel)
STD 110 LH (1-Piece) QR 110 (2-Piece) QRW / PRW 110 (2-Piece) Mark 4 10/110 Round Receiver (2-Piece) STD 110 LH Round Receiver (1-Piece) STD 10/110 Round Receiver (2-Piece) QR 10/110 Round Receiver (2-Piece) STD 10 RH-SA (1-Piece) QR 110 (2-Piece) QRW / PRW 110 (2-Piece) Mark 4 10/110 Round Receiver (2-Piece) STD 10 RH-SA Round Receiver (1-Piece) STD 10/110 Round Receiver (2-Piece) QR 10/110 Round Receiver (2-Piece) STD 10 LH-SA (1-Piece) QR 110 (2-Piece) QRW / PRW 110 (2-Piece) Mark 4 10/110 Round Receiver (2-Piece) 50219 52314 49833 59245 55711 55741 55761 52326 52314 49833 59245 55721 55741 55761 52326 52314 49833 59245 55731 55741 55761 50000 50020 50022 50045 50053 50020 50022 50045 50053 55742 52317 55724 55742 55742 50001 51736 50021 50023 50046 54241 50054 49838 59250 59240 51738 50021 50023 50046 54241 50054 49838 59255 59240
Maximum Ring Spacing in Inches
Maximum Ring Spacing in Inches
5.6
5.3
6.1
5.5
5.8
5.8
6.2
5.4
5.5
6.5
6.5
6.1
6.0
6.5
6.5
NA
5.5
5.6
5.3
6.1
5.5
Matte
52136 54265 57506
Recommended Rings L SH L SH L SH L SH L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 SH30
5.8 5.8 6.2 5.4 Recommended Rings

L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30
5.5
6.5
6.5
6.1
6.0
6.5
Colt AR15 & M16
Mark 4 AR15 / M16 Handle Mount
L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L
M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M
M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30
M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30
Mark 4 CQ/T Flat Top Rail
Mark 4 CQ/T Throw Lever Mount
All AR15 style rifles with flat top Picatinny rail Remington 700/721/725 (Long Action, Right Hand Only) STD 700 RH-LA (1-Piece) Mark 4 700 LA/Super Mag Long Range (1-Piece) 8-40 Adapt. STD 700 Long Range RH-LA (1-Piece) Remington 700/721/725 (Long Action, Left Hand Only) STD 700 LH-LA (1-Piece) Remington 700/721/725 (All Long Action Models) STD 700 (2-Piece) STD 700 RVF (2-Piece) DD 700 (2-Piece) DD 700 RVF (2-Piece) QR 700 (2-Piece) Mark 4 700 LA/Super Mag Long Range (1-Piece) 8-40 Adapt. QRW / PRW 700 (2-Piece) Mark 4 700 (2-Piece) 8-40 Adaptable Remington 700/721/725 (Short Action, Right Hand Only) STD 700 RH-SA (1-Piece) STD 700 Long Range RH-SA (1-Piece) QR 700 RH-SA (1-Piece) Mark 4 700 SA (1-Piece) 8-40 Adaptable DD XP-100 (1-Piece) Remington 700/721/725 (All Short Action Models) STD 700 (2-Piece) STD 700 RVF (2-Piece) DD 700 (2-Piece) DD 700 RVF (2-Piece) QR 700 (2-Piece) QRW / PRW 700 (2-Piece) Mark 4 700 (1-Piece) 8-40 Adaptable Mark 4 700 (2-Piece) 8-40 Adaptable
SH
SH
SH30 SH30 SH30 SH30 SH30 SH30 SH30 SH30 SH30 SH30
Savage 110 through 116 Round Receiver (Left Hand, Long Action, Heavy Barrel)
50003
50004 65970 51732
L L L
L L L
M M M
M M M
M M M
L L L
L30 L30 L30
L30 L30 L30
M30 M30 M30
M30 M30 M30
H30 H30 H30
H30 H30 H30
H30 H30 H30
M30 M30 M30
M30 M30 M30
H30 H30 H30
H30 H30 H30
Savage 10 through 16 (Right Hand, Short Action, Heavy Barrel)
50007
L30
L30
M30
M30
H30
H30
H30
M30
M30
H30
H30
Savage 10 through 16 Round Receiver (Right Hand, Short Action, Heavy Barrel) 50015 50017 50041 50049 49840 50016 50018 50042 50044 50050 65970 49841 59230 L L L L L L L L L L L L L L L L M M M M M M M M M M M M M M M M M M M M M M M M L L L L L L L L L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 L30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 H30 H30 H30 H30 H30 H30 H30 H30 H30 H30 H30 H30 H30 H30 H30 H30 H30 H30 H30 H30 H30 H30 H30 H30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 M30 H30 H30 H30 H30 H30 H30 H30 H30 H30 H30 H30 H30 H30 H30 H30 H30
Savage 10 through 16 (Left Hand, Short Action, Heavy Barrel)
Savage 10 through 16 Round Receiver (Left Hand, Short Action, Heavy Barrel) STD 10 LH-SA Round Receiver (1-Piece) STD 10/110 Round Receiver (2-Piece) QR 10/110 Round Receiver (2-Piece) Tactical Shotguns Tactical Shotguns STD 70A (1-Piece) Winchester 70, 670, 770, & 70A (Long Action) (serial number higher than 66,360) STD 70 Long Range RH-LA (1-Piece) STD 70 RVR (2-Piece) STD 70 RVF/R (2-Piece) DD 70 (2-Piece) DD 70 RVF (2-Piece) QR 70 (2-Piece) QRW / PRW 70 (2-Piece) Mark 4 70 Long Range (1-Piece) 8-40 Adaptable Mark 4 70 (2-Piece) 8-40 Adaptable STD 70 Long Range RH-SA (1-Piece) STD 70 RVR (2-Piece) STD 70 RVF/R (2-Piece) DD 70 (2-Piece) DD 70 RVF (2-Piece) QR 70 (2-Piece) QRW / PRW 70 (2-Piece) Mark 4 70 Long Range (1-Piece) 8-40 Adaptable Mark 4 70 (2-Piece) 8-40 Adaptable
50005
50006 51734 51247 59235 53570
L L L L L
L L L L L
M M M M M
M M M M M
M M M M M
L L L L L
L30 L30 L30 L30 L30
L30 L30 L30 L30 L30
M30 M30 M30 M30 M30
M30 M30 M30 M30 M30
H30 H30 H30 H30 H30
H30 H30 H30 H30 H30
H30 H30 H30 H30 H30
M30 M30 M30 M30 M30
M30 M30 M30 M30 M30
H30 H30 H30 H30 H30
H30 H30 H30 H30 H30
50015 50017 50041 50049 49840
50016 50018 50042 50044 50050 49841 59235 59230
L L L L L L L L
L L L L L L L L
M M M M M M M M
M M M M M M M M
M M M M M M M M
L L L L L L L L
L30 L30 L30 L30 L30 L30 L30 L30
L30 L30 L30 L30 L30 L30 L30 L30
M30 M30 M30 M30 M30 M30 M30 M30
M30 M30 M30 M30 M30 M30 M30 M30
H30 H30 H30 H30 H30 H30 H30 H30
H30 H30 H30 H30 H30 H30 H30 H30
H30 H30 H30 H30 H30 H30 H30 H30
M30 M30 M30 M30 M30 M30 M30 M30
M30 M30 M30 M30 M30 M30 M30 M30
H30 H30 H30 H30 H30 H30 H30 H30
H30 H30 H30 H30 H30 H30 H30 H30
Savage 110 through 116 (Right Hand, Long Action, Heavy Barrel) STD 110 RH (1-Piece) QR 110 RH (1-Piece) QR 110 (2-Piece) QRW / PRW 110 (2-Piece) 49996 52314 49833 50066 L L L L L L L L M M M M M M M M M M M M L L L L L30 L30 L30 L30 L30 L30 L30 L30 M30 M30 M30 M30 M30 M30 M30 M30 H30 H30 H30 H30 H30 H30 H30 H30 H30 H30 H30 H30 M30 M30 M30 M30 M30 M30 M30 M30 H30 H30 H30 H30 H30 H30 H30 H30
Winchester 70, 670, 770, & 70A (Short Action) (serial number higher than 66,360)
Savage 110 through 116 Round Receiver (Right Hand, Long Action, Heavy Barrel) Mark 4 10/110 Round Receiver (2-Piece) STD 110 RH Round Receiver (1-Piece) STD 10/110 Round Receiver (2-Piece) QR 10/110 Round Receiver (2-Piece) 59245 55701 55741 55761 55742 L L L L L L L L M M M M M M M M M M M M L L L L L30 L30 L30 L30 L30 L30 L30 L30 M30 M30 M30 M30 M30 M30 M30 M30 H30 H30 H30 H30 H30 H30 H30 H30 H30 H30 H30 H30 M30 M30 M30 M30 M30 M30 M30 M30 H30 H30 H30 H30 H30 H30 H30 H30
Abbreviations:
LA SA RH LH
Long action Short action Right hand Left hand
LR Long rear base RVF Reversible front base RVR Reversible rear base RVF/R Reversible front and rear base
Rings:
SH SH30 H H30 M M30
Super high 1" Super high 30mm High 1" High 30mm Medium 1" Medium 30mm
L SL HX MX LX NA
Low 1" Super low 1" High 1" extension Medium 1" extension Low 1" extension Not available
Mount System Types:
RM Ringmount PRW Permanent Ring Weaver-style DD Dual Dovetail
QR Detachable Accuracy: Quick Release Mount System QRW Detachable Accuracy: Cross-slot format STD Dovetail front and windage adjustable rear ring
Indicates the correct ring to be used with this scope
Mark AR 3-9x40mm T2 (& Tactical Hunter)
Question on removing the quick release.
Mark 4 4.5-14x50mm LR/T M1 (& Illuminated Reticle, & Metric)
Mark 4 2.5-8x36mm MR/T M1 & M2 (& Illuminated Reticle)
Mark 4 2.5-8x36mm MR/T M1 & M2 (& Illuminated Reticle)
Mark 4 1.5-5x20mm MR/T (one-inch)
Mark 4 1.5-5x20mm MR/T (one-inch)
Mark 4 4.5-14x40mm LR/T Target
Mark AR 4-12x40mm Adj. Obj. T2
Mark 4 10x40mm LR/T M1 & M3
Mark 4 4.5-14x40mm LR/T Target
Mark 4 10x40mm LR/T M1 & M3
Mark 4 16x40mm LR/T M1
Mark 4 16x40mm LR/T M1
1x14mm Tactical Prismatic
Mark AR 1.5-4x20mm
41
TACTICAL PRESENTATION KNIFE
RETRACTABLE BALLISTICS CHART
TORX DRIVER
LEUPOLD DIGITAL CAMERA ADAPTER FOR SPOTTING SCOPES
LEUPOLD MARK 4 RING TORQUE WRENCH
Leupolds Limited Edition Tactical Presentation Knife incorporates a lockable, hardened stainless steel, 3.5" modified spear point blade, and a winewood handle featuring our distinctive gold medallion PART NO. 62865
Gives you a better handle on driving and securing Torx-head mounting screws, which wont strip like oldfashioned hex-head screws. PART NO. 50818 Keep critical, custom ballistics data where you can access it from any shooting position. Attaches to your scopes maintube (1" or 30mm) for instant access, and the durable metal tape with your ballistics data automatically retracts after use.
MODEL Chart 1" Chart 30mm PART NO. 54804 54778
LEUPOLD BINOCULAR TRIPOD ADAPTER
TACTICAL KNIFE
LEUPOLD ZERO POINT MAGNETIC ILLUM. BORESIGHTER

Our new lockable Tactical Knife has a 3.5" hardened stainless steel spear point blade, ambidextrous thumb switch, carrying clip, and machined G10 handles in coyote brown. PART NO. 62860 With the binocular tripod adapter, you can enjoy the same steady view with your binoculars thats normally reserved for spotting scopes. Fits Mesa, Pinnacles, and Olympic 8x42mm models. PART NO. 48826
Capture images at long range using this adapter, your digital camera, and the Leupold Golden Ring 12-40x60mm spotting scope. The adapter itself snaps onto any digital camera with a 58mm lens. With the plates included with the kit, you can convert the adapter to fit 28mm, 37mm, 43mm, and 52mm digital camera lenses. PART NO. 58380
With this special wrench you can not only tighten, but loosen the mounting screws on Mark 4 style rings. Delivers the proper amount of torque value (65-in lbs) when installing Mark 4 style rings for return to zero accuracy. PART NO. 48762
TREK POD II
COMPACT TRIPOD
TOOLS & ACCESSORIES
MOUNTING TOOL
LENS PEN
Use it as a height-adjustable trekking pole, and when needed, three legs flare out, making it a free-standing optics mount. Its unique design even adapts to uneven ground. At the top is a powerful magnet and two additional supplied magnets attach to any optics with threaded mounts. PART NO. 62755
Features one slotted screwdriver, two Torx drivers, and five hex-head drivers. PART NO. 52296
With this revolutionary boresighter, you can get your rifle on the paper faster than ever, recheck your zero, and even record the zero at different ranges or bullet weights, and readjust your scope without the need to fire. PART NO. 59012
Has a natural-hair brush which is fully retractable for protection when not in use. The microfiber cleaning tip automatically replenishes itself with a dry cleaning compound. PART NO. 48807
When a full-size tripod is just too much equipment to take into the field, our compact tripod gets the nod. The 4-section legs extend to 31.5" and collapses to a mere 15". The adjustable ball head with quick-release base gives you incredible viewing versatility. PART NO. 56446
ALUMINA SERIES LENS SHADES

Thread these 2.5" and 4" Alumina lens shades together to create custom lengths.
MODEL Alumina 50mm 2.5" - Matte Finish Alumina 50mm 4" - Matte Finish Alumina 40mm 2.5" - Matte Finish Alumina 40mm 4" - Matte Finish PART NO. 52350 52353 56187 56190
ALUMINA RUBBER EYEPIECE GUARD

Shades the eyepiece, and protects you from recoil during extreme uphill shooting angles and extremely heavy recoiling firearms.
objective lens cover
FITS 2004 AND NEWER MARK 4 40MM AND 50MM SCOPES MODEL Rubber Eyepiece Guard Standard EP - Matte Finish PART NO. 58965
eyepiece lens cover
PRE-2004 LENS SHADES

These 2.5" and 4" lens shades can be threaded together to create custom lengths. Models to fit 40mm objective scopes are available.
ALUMINA FLIP-BACK LENS COVERS

These machined-aluminum flip-back lens covers protect your lenses from the water, snow, dust, and dirt you encounter in the field, yet keep them ready for action at an instants notice.
MODEL Flip-Back Lens Cover 50mm - Matte Finish Flip-Back Lens Cover 40mm - Matte Finish Flip-Back Lens Cover 36mm - Matte Finish Flip-Back Lens Cover 20mm - Matte Finish Flip-Back Lens Cover - Standard EP- Matte Finish PART NO. 59050 59045 59040 59030 59055
TACTICAL SCOPE COVERS

Youve made an investment in the bestnow protect it! Designed specifically to fit our Mark 4 riflescopes. Easy to put on and remove, the black neoprene sleeve offers 6mm of thick protection for your scope.
SCOPE MODELS Mark AR 1.5-4x20mm Mark 4 1.5-5x20mm MR/T (one-inch) Mark 4 1.5-5x20mm MR/T M2 Illuminated Reticle Mark 4 1-3x14mm CQ/T Illuminated Reticle SIZE PART NO.
MODEL 40mm 2.5" - Matte Finish 40mm 4" - Matte Finish FITS ALL PRE-2004 40MM ADJ. OBJ. SCOPES
PART NO. 52344 52347
Mark 4 S
54857
MARK 4 ANTI-REFLECTION DEVICE (ARD) ALUMINA PROTECTIVE LENS COVERS

These machined-aluminum, knurled discs thread into your objective lens and eyepiece to protect your optics during storage or rough transport. Weve created these threaded Anti-Reflective Devices in nearly every objective lens size, each featuring scores of tiny, light-transmitting honeycomb baffles that reduce lens glare without obscuring your sight picture.
Mark AR 3-9x40mm T2 Mark AR 3-9x40mm Hunter Mark AR 4-12x40mm Adj. Obj. T2 Mark 4 2.5-8x36mm MR/T M1 (& Illuminated Reticle) Mark 4 2.5-8x36mm MR/T M2 (& Illuminated Reticle) Mark 4 3-9x36mm MR/T M1 (& Illuminated Reticle) Mark 4 3-9x36mm MR/T M3 (& Illuminated Reticle) Mark 4 4.5-14x40mm LR/T Target Mark AR 6-18x40mm Adj. Obj. T1 Mark 4 4.5-14x50mm LR/T M1 (& Metric, & Illuminated Reticle) Mark 4 3.5-10x40mm LR/T M1 (& Illuminated Reticle) Mark 4 3.5-10x40mm LR/T M1 Front Focal Mark 4 3.5-10x40mm LR/T M2 Illuminated Reticle Mark 4 3.5-10x40mm LR/T M3 (& Illuminated Reticle) Mark 4 3.5-10x40mm LR/T M3 Front Focal Mark 4 10x40mm LR/T M1 Mark 4 10x40mm LR/T M3 Mark 4 16x40mm LR/T M1 Mark 4 6.5-20x50mm LR/T M1 (& Illuminated Reticle) Mark 4 8.5-25x50mm LR/T M1 (& Illuminated Reticle) Mark 4 8.5-25x50mm ER/T M1 Front Focal
Mark 4 M
57866
MODEL ARD Anti-Reflection Device (Pre-2004) ARD Anti-Reflection Device 60mm ARD Anti-Reflection Device 50mm ARD Anti-Reflection Device 40mm ARD Anti-Reflection Device 36mm
PART NO. 52292 62955 62885 62880 62875
Mark 4 L
57868
Mark 4 X-L
57877
PRE-2004 ANTI-REFLECTION DEVICE (ARD)

A quarter-inch deep and perforated with scores of tiny, light-transmitting honeycomb baffles, the ARD reduces lens glare.
Mark 4 XX-L
57864
MODEL Threaded Lens Cover 50mm - Matte Finish Threaded Lens Cover 40mm - Matte Finish Threaded Lens Cover 36mm - Matte Finish Threaded Lens Cover 20mm - Matte Finish Threaded Lens Cover Standard EP - Matte Finish
PART NO. 58950 58940 58935 58925 58955
43
HORUS RETICLE CONFIGURATIONS Allowing for ultra rapid engagement, quick sight correction, and exact aiming points, Horus Vision reticles are becoming the first choice of modern day operators.
14 13 12 11 10 9 8 7 6 5 4 3 2 1 18 17 16 15 14 13 12 18 1710 16 9 15 8 14 7 13 6 12 5 11 4 10 3 11 92 81 7 61 52 43 34 2 5 14 13 12 11 10 9 8 7 6 5 4 3 2 1 1 6 7 1 8 2 9 3 10 411 5 12 6 13 7 14 30 15 29 16 28 17 27 18 26 19 25 20 24 21 23 22 22 23 21 24 20 25 19 26 18 27 17 28 16 29 15 30 14 2013 1912 18 27 1710 16 29 15 30 14 7 13 6 12 5 11 4 10 3 8 9 10 11 12 13 14 30 15 29 16 28 17 27 18 26 19 25 20 24 21 23 22 22 23 21 24 25 26 11 28 9 8 92 14 13 12 11 10 9 8 7 6 5 4 3 2 1 81 7 61 52 43 34 2 5 14 13 12 11 10 9 8 7 6 5 4 3 2 1 1 6 7 1 8 2 9 3 10 411 5 12 6 13 7 14 815 9 16 10 1118 12 17 13 14 15 16 17 18
1 2 3 4 5 6 7 8
18 17 16 15 14 13 12 18 17 5 4 3 2 1
1 22 3 5
1
1 3
43 34 2 5
1 2 3 4
1
1 2 3
5
1 22 3
1 3
43 34 2 5
1 2 3 4
1
52
4 5 6 6 7 7 8 8 9 9 5
52
4 5 6 7
6 7
6 7 8
1 6 7 1 8 2 9 3
6 7
6 7 8
1 6 7 1 8 2 9 3
88
4
88
4
8 9
4 5 12 6 13 7 14 815 9 16
10 11 12 13 14 15 16 17 18
16 9 15 8 14 7 13 6 12 5
10 11 12 13 14 15 16 17 18
92 10
81
61
52
43
34 2 5 10
10 11 12 13 14 15 16 17 18
5 12 6 13 7 14 30 15 29 16 28 17 27 18 26 19 25 20 24 21 23 22 22 23 21 24 20 25 19 26 18 27 17 28 16 29 15 30 14 2013 1912 18 27 17 28 16 29 15 30 14 7 13 6 12 5 8 9 9 8 12 13 14 30 15 29 16 28 17 27 18 26 19 25 20 24 21 23 22 22 23 21 24 25 26
10 11 12 13 14 15 16 17 18 19 20 21 22 23
10 11 12 13 14 15 16 17 18
10 11 12 13 14 15 16 17 18
92 10
81
61
52
43
34 2 5 10
10 11 12 13 14 15 16 17 18
10 11 12 13 14 15 16 17 18 19 20 21 22 23
17
17
18 12
13
14
15
16
17
18
12
12
12
12
14 92
81
61
52
43
14 34 2 5
1 6
7 1 8
2 9
14 92
81
61
52
43
14 34 2 5
1 6
7 1 8
2 9
16
16
16
16
18
18
18
18
18
17
16
15
14
13
12 18
19 1 Fig. 16 9 15 8 17 20 21 22 23
14 7 13 6 12 5
19 20 21 22 23
92 20
81
61
52
43
34 2 5 20
1 6
7 1 8
2 9
19 20 21 22 23
5 12 6 13 7 14 0815 29 16 28 17 27 18 26 19 25 20 24 21 23 22 22 23 21 24 20 25 19 26 18 27 17 28 16 29 15 3 14 2013 1912 18 27 17 28 16 29 15 3 14 7 13 6 12 5 9 9 8 12 13 14 0 15 29 16 28 17 27 18 26 19 25 20 24 21 23 22 22 23 21 24 25 26
Fig. 2
19 20 21 22 23
19 20 21 22 23
92 20
81
61
52
43
34 2 5 20
1 6
7 1 8
2 9
19 20 21 22 23
5 12 6 13 7 14 815 9 16
18 12
13
14
15
16
17
18
22
22
22
22
RETICLES
24 24 24 24 Horus reticles intuitively integrate rangefinding and come-up in a single, easy25 25 25 25 to-use reticle that doesnt require adjustment dials. With spotter26and sniper both 26 26 26 27 27 27 utilizing a Horus 27 reticle, the dope for any shot can be quickly determined, communi28 28 28 28 cated, executed 29 corrected if necessary. and 29 29 29 31 31 31 In the examples shown in the above figures, lets 31 assume the sniper has adjusted 32 32 32 32 his scope for the33 shot, held dead on and fired. Seeing the point of impact (in this 33 33 33 34 34 34 34 case, the red dot), the spotter, using a Horus reticle spotting scope can immediately call out, Come up three, over two and send it. 30 30 30 30
24 24 Figure 2 shows24 the snipers follow-up shot hold would appear. There is a 24 how 25 25 25 25 positive aiming26 point, easily communicated between spotter and sniper and 26 26 26 27 27 27 27 made without the need to touch adjustment dials. This allows for lightning fast 28 28 28 28 29 29 29 re-engagement of a target while eliminating the resetting of dials to zero for 29 30 30 30 30 subsequent shots at varying ranges. 31 31 31 31 32 33 34 32 33 34 32 33 34 32 33 34
-5 -5
-4
-3
-2
-1
+1
+2
+3
+4
+5 -5 -4 -3 -2 -1
-5 -5 -4 -3 -2 -1 -10 -9 -8 -7 -6 -5
-4
-3
-2
-1
+1
+2
+3
+4
+5 -5 -4 -3 -2 -1
-4
-5
-4
-3
-2
-1
+1
+2
+3
+4
+5 0
-4
-3
-2
-1
+1
+2
+3
+4
+5
+6
+7
+8
+9
+10
+1 +2
+1 +2 +3 +4
+1
+3
+2
+4
+3
+5
+4
-5
-4
-3
-2
-1
+1
+2
+3
+4
+5
1 3 5 7 9 11 13 15 17 19 21
1 3 5 7 9 11 13 15 17 19 21
H-32 (ONLY AVAILABLE IN SPOTTING SCOPES)

14 13 12 11 10 9 8 7 6 5 4 3 2 1 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
H-36 (ONLY AVAILABLE IN SPOTTING SCOPES)
1 2 3 4 5 6 7 8
2 1 1 2 3 4 5 6 7 8 9
H-27
3 4 5 6 7 8
18 17 16 15 14 13 12 5 4
9 10 11 12 13 14 15 16 17 18
3 10
9 10 11 12 13 14 15 16 17 18
12
13
14
15
16
17
18
12
14 9 8 7 6 5 4 3 2 1 1 2 3 4 5 6 7 8 9
16
18
18
17
16
15
14
13
12
19 20 21 22 23 24 25 26 27 28 29 30 31
20
19 20 21 22
12
13
14
15
16
17
18
22
H-37
23 24 25 26 27 28 29 30 31
H-58
45
CIRCLE PLEX (ILLUMINATED)
TMR (ILLUMINATED)
SPR (ILLUMINATED)
FINE DUPLEX
DUPLEX
WIDE DUPLEX
CQ/T CIRCLE DOT (ILLUMINATED)
10
11
12
RETICLES
CM-R 2 (ILLUMINATED)
LR DUPLEX
LRV DUPLEX
NEW M-TMR (CQBSS ONLY)
10
10
11
12
11
12
M-TMR
ILLUMINATED M-TMR
LEUPOLD MARINE TACTICAL MILLING RETICLE (M-TMR)

Much like the standard Tactical Milling Reticle, the M-TMR was designed to allow users to successfully estimate range and engage targets with greater flexibility than generally possible with other reticle styles. The staircased nature of this reticle preserves the instinctive fire capabilities on low magnification while allowing precise range estimation at any power setting. This unique blend of capabilities allows this reticle to perform equally well in open desert, heavy cover, or the urban environment. The M-TMR reticle is comprised of 0.5 mil graduations with a 0.1 mil line thickness in the center for absolute precision on higher magnification settings, but increases to 0.5 mil line thickness and 2.0 mil line thickness to ensure fast reticle acquisition on low magnification. The lower portion of the field contains rapid acquisition ranging brackets allowing the user to quickly estimate the distance to objects of known size. When the target fits, the corresponding bracket number immediately relays the distance in hundreds of meters. Two ranging marks, each 1 mil high and 1 mil wide are located 5 mils below center and 5 mils to the left or right provide rapid correlation to 1 mil reference points.
CM-R 2 & M- TMR CONFIGURATIONS
CM-R2
ILLUMINATED CM-R2
LEUPOLD CLOSE, MID-RANGE RETICLE (CM-R2)

Much like the SPR reticle, the CM-R2 was designed to allow users to successfully estimate range and engage targets with greater flexibility than generally possible with other reticle styles. This reticle also preserves the instinctive fire capabilities of the Leupold Circle Dot reticle in short range, low magnification engagements typical of 3-gun competition and Close Quarter Battle in the 21st century. This unique blend of capabilities allows the various optics platforms equipped with this reticle to perform equally well in open desert, heavy cover, or the urban environment. The CM-R2 reticle is comprised of a 0.5 MOA dot surrounded by a 5.0 MOA circle for a perfect combination of precision and speed. The hash marks on the horizontal stadia can be used for leading targets moving at 5, 10, and 15 mph respectively. The tic marks on the vertical stadia serve a dual purpose, allowing the user to quickly estimate the distance to 18 targets while serving as precise holdover points for targets between 300 and 900 meters. For best results, the CM-R2 reticle should be zeroed at 200 meters using M855 5.56mm NATO/.223 Remington ammunition producing a muzzle velocity of 2810 fps with 62 grain FMJ bullets. Once zeroed at 200 meters, the center point of the reticle also serves as a 50 meter aiming point.
Available in the HAMR, MR/T 1.5-5x, and the CQ/T. M855 5.56x45mm NATO -62 gr. -2819 fps. -M4 Carbine -200 meter Zero
47
Were proud to offer a wide selection of reticles, in a variety of riflescopes, designed to help you achieve your goals in nearly any type of shooting, from plinking to competition, and hunting to tactical environments. Several reticles are available as illuminated reticle options. Some are exclusive to certain riflescope lines. If you dont see the reticle you prefer listed as available in a particular scope, contact the Leupold Custom Shop for information on custom reticle installation.
TACTICAL RETICLE SUBTENSIONS Scope Type Scope Model Power Setting Fine Duplex Heavy Section Thin Section Thin Opening Duplex Heavy Section Thin Section Thin Opening Wide Duplex Heavy Section Thin Section Thin Opening Illum. Circle Plex Circle Inside inch cm inch cm inch cm inch cm inch cm inch cm inch cm inch cm inch cm inch cm 1.5-4 1.5 4.7 13.1 1.6 4.4 35.6 98.9 4 1.8 4.9 0.6 1.7 13.5 37.5 3 4.9 13.7 1.8 4.9 26.3 73.0 3-9 9 1.9 5.2 0.6 1.7 9.9 27.6 4 0.9 2.6 0.3 0.9 12.0 33.5
CQ/T ILLUMINATED CIRCLE DOT

The Circle Dot reticle is designed to offer fast target acquisition in any environment. It can also be used to estimate range.
Mark AR
4-12 12 0.3 0.9 0.1 0.3 4.7 13.1 6 0.7 1.9 0.2 0.6 8.5 23.6 6-18 18 0.3 0.7 0.1 0.2 3.2 8.9 1
CQ/T
1-3 3 72.3 1.2 3.3 3.1 8.7 212.5 3.6 9.9 9.2 25.6
PRISMATIC
1 1 138.8 385.7 3.1 8.5 6.3 17.4 3.5-10 3.5 2.1 5.9 0.7 1.9 16.1 44.8 10 0.7 2.0 0.2 0.6 5.4 15.0 4.5-14 4.5 0.4 1.2 0.1 0.4 4.7 13.1 14 0.1 0.4 0.0 0.1 1.6 4.5
LR/T
6.5-20 6.5 20 8.5-25 8.5 25 10 10 16 16
RANGE ESTIMATING WITH THE CIRCLE DOT RETICLE

Estimating range using the Circle Dot reticle is simple. Place the target inside the circle of the reticle. At 3x the diameter equates to 6 feet in height at 100 yards. At 200 yards, 6 feet is measured from the dot to the edge of the circle.
CQ/T Illuminated Circle Dot (when illuminated)
CQ/T Illuminated Circle Dot (when not illuminated)
Dot Size: 3 MOA at 3x 9 MOA at 1x
590.4 200.7
Circle Line inch Width cm Dot inch cm
Note: Subtension values are in inches at 100 yards and cm at 100 meters.
Circle Size: From center of dot to edge of circle Subtension of circle at 3x: 6 feet at 200 yards Circle Size: From edge to edge of circle Subtension of circle at 3x: 18 inches at 25 yards, 6 feet at 100 yards Circle Line: The width of the line creating the circle is large enough to be easily visible but thin enough so as not to obliterate an 18-inch object at 500 yards when set on 3x.
MIL DOT RETICLE
RETICLE CONFIGURATIONS
Several Leupold riflescopes are available with the Mil Dot reticle, which was designed to help the U.S. Marine Corps estimate distances. Its now standard for all military branches.
RANGE ESTIMATING WITH THE MIL DOT RETICLE

With practice, the Mil Dot system is simple to use. Dots are spaced in one mil (milliradian) increments on the crosshair. Using the mil formula, the shooter can create a table based on the known size of the object targeted. Just look through the scope, bracket the object between dots, and refer to the table for an estimated distance to the target. Leupold scopes fitted with the Mil Dot reticle include more specific instructions on its use.
MIL DOT
TMR HOLDOVER VALUES
MK262 Mod 0/1 AA53 16'' Carbine 5.56MM 77 GN 2550 FPS MV 100M Zero
TMR ILLUMINATED TMR
M118 LR AA11 16'' Carbine 7.62MM 175 GN 2500 FPS MV 100M Zero
200 METERS .71 300 METERS 1.72 400 METERS 2.92 500 METERS 4.32
200 METERS .66 300 METERS 1.71
TACTICAL MILLING RETICLE (TMR)

The Tactical Milling Reticle expands on existing Mil Dot reticles by using various sized and spaced hash marks on the vertical and horizontal stadia for increased ranging precision, accuracy, and quick one-meter range estimating reference points. All Mil Dot calculations are TMR compatible. To use the system, simply determine the range to the target using the mil system, then, use the corresponding aiming point that is matched to your cartridge to engage the target.
400 METERS 3.05 500 METERS 4.63
SPECIAL PURPOSE RETICLE

With the Special Purpose Reticle, you can engage targets with greater precision at longer ranges than generally possible with other reticle styles, yet also use it for instinctive, close-range/ low-magnification engagements. It also features several methods of accurate range estimation, using the height or width of the target as a guide. To use the system, simply determine the range to the target using the mil system, then, use the corresponding aiming point that is matched to your cartridge to engage the target. For targets that are inside 300 yards, simply use the center aiming dot to engage.
SPECIAL PURPOSE
5.56 x 45 MM M4 Carbine M855 SS109 2900 FPS MV 200 M Zero
7.62 x 51MM M14 Rifle 118 lr 175 GN 2600 FPS MV 100M Zero
RANGE ESTIMATING METHODS RANGE ESTIMATING METHODS

TORSO & HEAD SHOULDERS BODY LENGTH
RANGE ESTIMATING METHODS

100m 200m 400m 100m 200m 400m 200m 400m 800m
TORSO & HEAD
SHOULDERS
BODY LENGTH
STIMATING METHODS
200m 400m 100m 200m 400m 200m 400m 800m
SHOULDERS
BODY LENGTH
ILLUMINATED SPECIAL PURPOSE
200m
400m
200m
400m
800m
49
TACTICAL SCOPES
NEW PRODUCTS SHOWN IN RED
Linear Field of View Actual Magnification ft at 100 yd Dimensions (inches unless otherwise stated) m at 100 m A4 B6 C D E 1, 4 F G H I6 Low High Low High Low High Leupold Mark 4 Long Range / Tactical (LR/T) 10x40mm LR/T M1 13.1 6.1 2.3 2.2 2.7 4.3 2.0 1.7 30mm 10.0 11.1 3.7 10x40mm LR/T M3* 13.1 6.1 2.3 2.2 2.7 4.3 2.0 1.7 30mm 10.0 11.1 3.7 16x40mm LR/T M1 13.1 6.0 3.1 1.4 2.7 4.3 2.0 1.7 30mm 15.6 6.8 2.3 3.5-10x40mm LR/T M1 13.5 6.2 2.4 2.4 3.2 4.3 1.8 1.6 30mm 3.2 9.5 29.9 11.0 10.0 3.7 3.5-10x40mm LR/T M5 Front Focal 13.5 6.2 2.4 2.4 3.2 4.3 1.8 1.6 30mm 3.2 9.5 29.9 11.0 10.0 3.7 3.5-10x40mm LR/T M1 Ill. Ret. 13.5 6.2 2.4 2.4 3.2 4.3 1.8 1.7 30mm 3.2 9.5 29.9 11.0 10.0 3.7 3.5-10x40mm LR/T M1 Front Focal 13.5 6.2 2.4 2.4 3.2 4.3 1.8 1.6 30mm 3.2 9.5 29.9 11.0 10.0 3.7 3.5-10x40mm LR/T M2 Ill. Ret. 13.5 6.2 2.4 2.4 3.2 4.3 1.8 1.6 30mm 3.2 9.5 29.9 11.0 10.0 3.7 3.5-10x40mm LR/T M3* 13.5 6.2 2.4 2.4 3.2 4.3 1.8 1.6 30mm 3.2 9.5 29.9 11.0 10.0 3.7 3.5-10x40mm LR/T M3* Ill. Ret. 13.5 6.2 2.4 2.4 3.2 4.3 1.8 1.6 30mm 3.2 9.5 29.9 11.0 10.0 3.7 3.5-10x40mm LR/T M3* Front Focal 13.5 6.2 2.4 2.4 3.2 4.3 1.8 1.6 30mm 3.2 9.5 29.9 11.0 10.0 3.7 4.5-14x40mm LR/T Target 12.6 5.4 1.8 2.3 3.2 4.0 2.0 1.6 30mm 4.9 14.6 18.6 7.3 6.2 2.4 4.5-14x50mm LR/T M1 12.5 5.5 1.6 2.4 3.2 3.7 2.3 1.6 30mm 4.8 14.3 19.0 7.6 6.3 2.5 4.5-14x50mm LR/T M4 Front Focal 14.3 19.0 7.6 6.3 2.5 12.5 5.5 1.6 2.4 3.2 3.7 2.3 1.6 30mm 4.8 4.5-14x50mm LR/T M5 Front Focal 12.5 5.5 1.6 2.4 3.2 3.7 2.3 1.6 30mm 4.8 14.3 19.0 7.6 6.3 2.5 4.5-14x50mm LR/T M1 Ill. Ret. 12.8 5.5 1.6 2.4 3.2 3.7 2.3 1.7 30mm 4.8 14.3 19.0 7.6 6.3 2.5 4.5-14x50mm LR/T M1 Ill. Ret. (metric) 12.8 5.5 1.6 2.4 3.2 3.7 2.3 1.7 30mm 4.8 14.3 19.0 7.6 6.3 2.5 6.5-20x50mm LR/T M1 14.5 6.5 2.6 2.4 3.2 4.9 2.3 1.6 30mm 6.5 19.5 14.3 5.5 4.8 1.8 6.5-20x50mm LR/T M5 Front Focal 14.5 6.5 2.6 2.4 3.2 4.9 2.3 1.6 30mm 6.5 19.5 14.3 5.5 4.8 1.8 6.5-20x50mm LR/T M1 Ill. Ret. 14.4 6.5 2.6 2.4 3.2 4.9 2.3 1.7 30mm 6.5 19.5 14.3 5.5 4.8 1.8 8.5-25x50mm LR/T M1 14.5 6.5 2.6 2.4 3.2 4.9 2.3 1.6 30mm 8.2 25.1 11.2 4.4 3.7 1.4 8.5-25x50mm LR/T M5 Front Focal 14.5 6.5 2.6 2.4 3.2 4.9 2.3 1.6 30mm 8.2 25.1 11.2 4.4 3.7 1.4 8.5-25x50mm LR/T M1 Ill. Ret. 14.4 6.5 2.6 2.4 3.2 4.9 2.3 1.7 30mm 8.2 25.1 11.2 4.4 3.7 1.4 Leupold Mark 4 Mid Range/ Tactical (MR/T) 1.5-5x20mm MR/T (one-inch) 9.3 5.5 2.0 3.3 3.1 1.0 1.6 1.0 1.5 4.7 65.7 23.9 21.9 7.9 1.5-5x20mm MR/T M2 Ill. Ret 9.3 5.8 2.1 2.5 3.1 1.2 1.7 30mm 1.5 4.5 65.7 23.7 7.9 21.9 2.5-8x36mm MR/T M1 11.3 5.8 1.9 2.4 3.1 2.6 1.7 1.7 30mm 3.0 8.7 35.5 13.6 11.7 4.5 2.5-8x36mm MR/T M1 Ill. Ret 11.3 5.8 1.9 2.4 3.1 2.6 1.7 1.7 30mm 3.0 8.7 35.5 13.6 11.7 4.5 2.5-8x36mm MR/T M2 11.3 5.8 1.9 2.4 3.1 2.6 1.7 1.7 30mm 3.0 8.7 35.5 13.6 11.7 4.5 2.5-8x36mm MR/T M2 Ill. Ret 11.3 5.8 1.9 2.4 3.1 2.6 1.7 1.7 30mm 3.0 8.7 35.5 13.6 11.7 4.5 Leupold Mark 4 Extended Range/Tactical (ER/T) 4.5-14x50mm ER/T M3 Front Focal 14.5 6.5 2.6 2.4 3.2 4.9 2.3 1.7 30mm 8.2 25.1 11.2 4.4 3.7 1.4 4.5-14x50mm ER/T M1 Front Focal 14.5 6.5 2.6 2.4 3.2 4.9 2.3 1.7 30mm 8.2 25.1 11.2 4.4 3.7 1.4 6.5-20x50mm ER/T M1 Front Focal 14.5 6.5 2.6 2.4 3.2 4.9 2.3 1.7 30mm 8.2 25.1 11.2 4.4 3.7 1.4 6.5-20x50mm ER/T M5 Front Focal 14.5 6.5 2.6 2.4 3.2 4.9 2.3 1.7 30mm 8.2 25.1 11.2 4.4 3.7 1.4 8.5-25x50mm ER/T M1 Front Focal 14.5 6.5 2.6 2.4 3.2 4.9 2.3 1.7 30mm 8.2 25.1 11.2 4.4 3.7 1.4 8.5-25x50mm ER/T M5 Front Focal 14.5 6.5 2.6 2.4 3.2 4.9 2.3 1.7 30mm 8.2 25.1 11.2 4.4 3.7 1.4 Leupold Mark AR 1.5-4x20mm 9.2 5.5 2.1 2.2 3.1 1.0 1.6 1.0 1.6 4.2 75.0 28.5 25.0 9.5 3-9x40mm T2 12.4 5.6 2.3 2.2 3.2 3.5 1.8 1.6 1.0 3.3 8.6 32.3 14.0 10.8 4.7 3-9x40mm Hunter 12.4 5.6 2.3 2.2 3.2 3.5 1.8 1.6 1.0 3.3 8.6 32.3 14.0 10.8 4.7 4-12x40mm Adj. Obj. T2 12.4 5.3 2.0 2.2 3.1 4.0 2.1 1.6 1.0 4.3 11.2 22.8 11.0 3.7 7.6 6-18x40mm Adj. Obj. T1 13.5 6.1 2.7 2.2 3.2 4.2 2.1 1.6 1.0 6.7 17.1 14.5 6.6 4.8 2.2 Leupold Prismatic 1x14mm Prismatic 4.5 2.6 0.6 0.8 1.9 NA NA NA 30mm 1.0 83.0 27.6 Leupold Mark 4 Close Quarter/ Tactical (CQ/T) 1-3x14mm CQ/T 8.8 1.6 3.0 1.2 1.5 2.9 1.0 2.9 112.0 41.5 37.5 13.8 Leupold DeltaPoint Reflex Sight Cross Slot Mount 1.6 1.38 1.0 All Mounts 1.6 1.38 1.0 Leupold Mark 8 CQBSS 1.1-8x 2 3 3.6 1.6 1.4 1.7 34mm 1.1 8 92 14.7 31 4.9 1.8 6.6 Leupold Mark 4 ER/T M5 Locking Adjustment 6.5-20x50 14.5 7 2.7 2.4 3.2 4.9 2.3 1.6 30mm 6.5 19.5 14.3 5.5 4.8 1.8 Leupold HAMR (includes DeltaPoint) 4x24mm 4 31.5 10.5
4 6
SPECIFICATIONS Optimum Eye Relief Objective Weight Clear Aperture inch mm Low High Low High inch mm ounce gram
3.4 3.4 4.0 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.4 4.5 4.5 4.5 4.5 4.5 4.4 4.4 4.4 5.3 5.3 5.3 4.4 4.4 3.7 3.7 3.7 3.7 5.3 5.3 5.3 5.3 5.3 5.3 4.3 4.7 4.7 4.7 4.7 5.0 2.8 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.7 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.6 3.7 3.7 3.7 3.6 3.6 3.0 3.0 3.0 3.0 3.7 3.7 3.7 3.7 3.7 3.7 3.8 3.7 3.7 3.7 3.7 3.0 2.0 86 86 101 119 119 119 119 119 119 119 119 113 113 113 113 113 113 111 111 111 134 134 134 113 112 93 93 93 93 134 134 134 134 134 134 109 119 119 119 119 127 71 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 93 94 94 94 93 91 76 76 76 76 94 94 94 94 94 94 97 94 94 95 94 76 51 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 0.8 0.8 1.4 1.4 1.4 1.4 2.0 2.0 2.0 2.0 2.0 2.0 0.8 1.6 1.6 1.6 1.6 0.6 0.6 83.8 93 0.9 2 0.9 40 40 40 40 40 40 40 40 40 40 40 40 50 50 50 50 50 50 50 50 50 50 50 20 20 36 36 36 36 50 50 50 50 50 50 20 40 40 40 40 14 14 24 50 24 21.0 21.0 22.5 19.5 19.5 21.0 19.5 19.5 19.5 21.0 19.5 16.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.0 22.5 22.5 22.5 9.7 16.0 16.0 17.0 16.0 17.0 22.5 22.5 22.5 22.5 22.5 22.5 9.5 12.5 12.5 14.5 14.5 12.0 17.5 0.6 0.6 23.2 30.9 17.2 595 595 638 553 553 595 553 553 553 595 553 454 624 624 624 624 624 624 624 624 638 638 638 275 425 454 454 454 454 638 638 638 638 638 638 269 354 354 411 411 340 496 18 18 657 876 487
Elevation Windage Adjustment Range* Adjustment Range** MOA MOA 90 75 140 65 65 65 65 65 65 65 65 100 100 100 100 100 100 70 70 70 75 75 75 80 120 90 90 90 90 60 60 60 60 60 60 67 56 56 55 56 70 90 60 60 100 100 10 mil 60 52 45 65 65 65 65 65 65 65 65 100 100 100 100 100 100 70 70 70 70 70 70 80 120 90 90 90 90 60 60 60 60 60 60 67 56 56 55 56 70 90 60 60 100 100 10 mil
PRODUCT SPECIFICATIONS / ORDERING INFORMATION
Unlimited Unlimited 3.7 4.4 2.8 3.3 3.6 93.9 111 70
On all fixed power scopes, dimension E is measured from the back of the eyepiece to the beginning of the eyepiece tube threads. On all scopes with adjustable objectives, dimension G is measured over the knurled ring.
Dimensions A and E may vary according to the focusing position of the eyepiece. On CQ/T, dimension is measured from where mounting foot rests on the base.
* BDC (Bullet Drop Compensation) Dial ** Elevation and windage adjustment ranges are the distance from one extreme of the adjustment to the other.
BINOCULARS, SPOTTING SCOPES & RANGEFINDERS
Leupold Katmai Binoculars 6x32mm 6x 8x32mm 8x 10x32mm 10x Leupold BX- Cascades Binoculars 7x42mm 7x 8x42mm 8x 10x42mm 10x Leupold Golden Ring Spotting Scopes 10-20x40mm Compact 10.0x - 19.9x 15-30x50mm Compact 15.2x - 30.4x 12-40x60mm 12.7x - 38.1x 12-40x60mm HD 12.7x - 38.1x Leupold Tactical Binoculars 10x50mm Patrol 10x 10x50mm Military w/ Mil Dot 10x 10x50mm Military w/ TMR 10x Leupold Mark 4 Spotting Scopes 12-40x60mm Tactical w/ Mil Dot 12.7x - 38.1x 12-40x60mm Tactical w/ TMR 12.7x - 38.1x 20-60x80mm w/ Mil Dot 20x-60x 20-60x80mm w/ TMR 20x-60x Leupold RX/RXB Series Rangefinders RXB-IV 9x RX-1000 6x
SPECIFICATIONS Angular Objective Linear Field of View Field of Weight Length Actual Aperture Twilight View Factor Magnification ft/1000 yd m/1000 m degrees ounce gram inches mm mm
425 335 272 388.5 341 267 199 - 136 136 - 89 168 - 52 168 - 52 262 262 262 168 - 52 168 - 52 121-42 121-43 279 325 142 112 91 118 114 89 66 - 45 45 - 30 56 - 18 56 - 18 87 87 87 56 - 18 56 - 18 37-13 37-14 93 100 8.1 6.4 5.2 7.4 6.5 5.1 3.8 - 2.6 2.6 - 1.7 3.2 - 1.0 3.2 - 1.0 5.0 5.0 5.0 3.2 - 1.0 3.2 - 1.0 2.3-0.8 2.3-0.9 5.3 6.0 18.2 18.9 18.2 22.9 22.9 23.1 515 535 515 649 649 655 4.1 105 4.1 105 4.1 105 5.5 140 5.5 140 5.5 140 7.5 11.0 12.4 12.4 191 279 315 315 32 32 32 42 42 42 40 50 60 60 50 50 50 60 60 80 80 32 23 13.9 16.0 17.9 17.1 18.3 20.5 20.0 - 28.3 27.6 - 39.0 26.8 - 48.9 26.8 - 48.9 22.4 22.4 22.4 26.8 - 48.9 26.8 - 48.9 40-69.3 40-69.4 13.0 11.7
SCOPE DIMENSIONS
Exit Pupil mm 5.3 4.0 3.2 6 5.3 4.2 4.0 - 2.0 3.3 - 1.6 4.8 - 1.5 4.8 - 1.5 5.0 5.0 5.0 Eye Relief mm 19.2 15.9 10.2 18 18 18 18.5 - 17.2 17.5 - 17.1 30.0 - 30.0 30.0 - 30.0 18.0 18.0 18.0 Interpupillary Distance mm 57-72 57-72 57-72 58-72 58-72 58-72 NA NA NA NA 60 - 70 60 - 70 60 - 70 NA NA NA NA NA NA Close Focus Distance ft 4.9 4.9 4.9 10 10 10 5.5 13.5 36.0 36.0 10.5 10.5 10.5 36.0 36.0 36 36 33 18.0 m 1.6 1.6 1.6 3 3 3 1.7 4.1 11.0 11.0 3.2 3.2 3.2 11.0 11.0 10.9 10.9 11 6.0
DIAGRAM #1 (Mark 4 CQ/T 1-3x14mm)
DIAGRAM #2
15.8 447 21.5 610 37.0 1049 37.0 1049 25.7 25.7 25.7 37.0 37.0 61.8 61.8 23.0 6.8 729 729 729 1049 1049 1752 1752 652 193
6.7 170 6.7 170 6.7 170 12.4 12.4 15.5 15.5 315 315 390 390
4.8 - 1.5 30.0 - 30.0 4.8 - 1.5 30.0 - 30.0 4.1-1.3 30 4.1-1.4 31 3.6 3.8 14 21.0
RANGEFINDER MAXIMUM & MINIMUM RANGES

Leupold RX/RXB Series Rangefinders RXB-IV RX-1000
SPECIFICATIONS
Maximum Range Minimum Range
yards meters yards meters 1500 1000 1371.6 914.4 10 10 9 9.1
5.4 138 4.0 102
NEW PRODUCTS SHOWN IN RED

LEUPOLD SCOPES TACTICAL PRISMATIC 1x14mm Tactical Prismatic MARK AR 1.5-4x20mm 3-9x40mm T2 4-12x40mm Adj. Obj. T2 6-18x40mm Adj. Obj. T1 MARK 4 RETICLE & PART NO. Illum. Circle Plex 63300 Duplex Fine Duplex 67170 67165 67390 67400 Illum. Illum. Illum. Special Illum. H-27 Special Circle TMR TMR Purpose Finish Duplex Mil Dot Mil Dot Purpose Dot Matte 67670 Matte 59100 Matte 67905 Matte 67910 60210 67915 Matte 67920 60180 67925 Matte 52128 67930 60020 67935 Dark Earth 67940 Matte 51850 67945 60025 67950 Matte 58850 60030 Matte 58860 60035 Matte 110080 110074 Matte 56140 56130 Matte 54660 54560 67955 60005 67965 Matte Matte 54680 67970 60080 67975 Matte 54690 67980 60070 67985 Matte 113092 Matte 48431 Matte 47638 Matte 50541 Matte 65490 65495 Matte 59345 Matte 110081 110075 110084 Matte 64660 64665 Matte 110082 110076 110086 Matte 63050 63055 Matte 110083 110079
Finish Matte Finish Matte Matte Matte Matte
Mil Dot 67160 67935 67405

H-32 H-36 H-37 H-58 M-TMR 110121 Illum. CM-R2 67675 110180 110995 111412
1-3x14mm CQ/T 1.5-5x20mm MR/T (one-inch) 1.5-5x20mm MR/T M2 2.5-8x36mm MR/T M1 2.5-8x36mm MR/T M2 3.5-10x40mm LR/T M1 3.5-10x40mm LR/T M2 3.5-10x40mm LR/T M3 3.5-10x40mm LR/T M1 Front Focal 3.5-10x40mm LR/T M3 Front Focal 3.5-10x40mm LR/T M5 Front Focal 4.5-14x40mm LR/T Target 4.5-14x50mm LR/T M1 4.5-14x50mm LR/T M4 Front Focal 6.5-20x50mm LR/T M1 8.5-25x50mm LR/T M1 8.5-25x50mm LR/T M5 Front Focal 10x40mm LR/T M1 10x40mm LR/T M3 16x40mm LR/T M1 4.5-14x50mm ER/T M1 Front Focal 4.5-14x50mm ER/T M3 Front Focal 4.5-14x50mm ER/T M5 Front Focal 6.5-20x50mm ER/T M1 Front Focal 6.5-20x50mm ER/T M5 Front Focal 8.5-25x50mm ER/T M1 Front Focal 8.5-25x50mm ER/T M5 Front Focal MARK 8 CQBSS 1.1-8x24mm Front Focal Matte MARK 4 HAMR 4x24mm Matte 4x24mm with DeltaPoint Matte MARK 4 ER/T M5A Locking Adjustment 6.5-20x50mm M5 Front Focal Matte
110087 110562 110089 110563 111855
ACCESSORIES BINOCULARS AND SPOTTING SCOPES Binocular Tripod Adapter 12-40x60mm Spotting Scope Soft Case 12-40x60mm Spotting Scope Digital Camera Adapter Quick Release Binocular Harness Window Mount Compact Tripod Trek Pod II SCOPE ACCESSORIES Mark 4 ARD (Anti-Reflection Device) (Pre-2004) Mark 4 ARD (Anti-Reflection Device) 30mm Mark 4 ARD (Anti-Reflection Device) 36mm Mark 4 ARD (Anti-Reflection Device) 40mm Mark 4 ARD (Anti-Reflection Device) 50mm Mark 4 ARD (Anti-Reflection Device) 60mm Zero Point Illuminated Magnetic Boresighter Retractable Ballistic Chart 1-inch Retractable Ballistic Chart 30mm Threaded 50-Ft Focus Adapter (Pre-2004) LensPen Mounting Tool Ring Wrench Torx Driver Torx Screw Kit CQ/T Battery Pack Mark 4 Ring Torque Wrench Leupold Anniversary Knife Tactical Utility Knife Tactical Presentation Knife
PART NO. 48826 53715 58380 55895 58400 56446 62755 52292 62870 62875 62880 62885 62955 59012 54804 54778 31685 48807 52296 48762 50818 52395 52644 48701 62790 62860 62865
DIAL OPTIONS
M1, M5 M2 (Short Version)
M2 (Tall Version)
M3
SCOPE COVERS Small Medium Large X-Large XX-Large
PART NO. 53572 53574 53576 53578 53580
Mark 4 Small Mark 4 Medium Mark 4 Large Mark 4 X-Large Mark 4 XX-Large
PART NO. 54857 57866 57868 57877 57864
T1
T2
d 68140
DELTAPOINT REFLEX SIGHT Cross Slot Mount Cross Slot Mount All Mounts All Mounts
RETICLE 3.5 MOA DOT 7.5 MOA DELTA 3.5 MOA DOT 7.5 MOA DELTA
PART NO. 67435 59665 66135 65930
BINOCULARS, SPOTTING SCOPES, RANGEFINDERS TACTICAL BINOCULARS 10x50mm Military with Mil Dot reticle 10x50mm Military with TMR reticle 10x50mm Patrol Katmai 6x32mm Katmai 8x32mm Katmai 10x32mm BX Cascades 7x42mm BX Cascades 8x42mm BX Cascades 10x42mm GOLDEN RING SPOTTING SCOPES 12-40x60mm 12-40x60mm HD 12-40x60mm HD Kit 10-20x40mm Compact 15-30x50mm Compact 15-30x50mm Compact Kit MARK 4 SPOTTING SCOPES 12-40x60mm Tactical w/ Mil Dot 12-40x60mm Tactical w/ TMR DIGITAL RANGEFINDERS RXB-IV Rangefinder RXB-IV Rangefinder RX-IV Rangefinder RX-1000 TBR Rangefinder RX-1000 TBR Rangefinder RX-1000 Rangefinder RX-750 Rangefinder RX-750 Rangefinder RX-600 Rangefinder
FINISH & PART NO. Coyote Brown Black 59125 59130 59120 56410 56420 56430 111736 111738 111741 Brown 61050 61060 61070 61080 61090 61100 Black 53756 60040 FINISH PART NO. Mossy Oak Brush 63335 Black/Gray 63325 Black/Gray 61470 Black 66500 Black 66505 Black 66495 Black 59520 Black 59525 Black 59515
BULLET DROP COMPENSATION OPTIONS

Many Leupold Mark 4 riflescopes feature Bullet Drop Compensation Dials. If yours doesnt, let the Leupold Custom Shop put 50+ years of scopesmithing experience to work, adding custom Bullet Drop Compensation (BDC) dials to your Leupold riflescope. Fill out our ballistics worksheet (available at www.leupold.com) with your ballistics data, and we will, in turn, create a precision laser-engraved dial that allows you to adjust for bullet impact at extremely long range. The positive click adjustment dials are made of aircraft-grade aluminum, with the appropriate ranges clearly and accurately laser-engraved on the dial. Simply determine range to the target then adjust to the corresponding mark on the elevation dial to achieve startling longrange precision. In addition to the precision laser-engraving, Leupold adjustment dials are double O-ring sealed against the moisture, dust, and sand youll encounter in the field. They also give you superior repeatable adjustment, virtually free of accuracy-degrading backlash or overtravel. For more information, contact the Leupold Custom Shop at 1-800-LEUPOLD or (503) 526-1400. Choose from a wide variety of standard dials, or let us create a custom dial to meet your specific needs.
DIALS T1* T2* M1* M2* M3 M5
ELEV
1 4 1 2
WIND
1 4 1 2
BDC No Yes No Yes Yes Yes
/ -MOA / -MOA 1-MOA
/ -MOA / -MOA
/ -MOA / -MOA
/ -MOA / -MOA / -MOA
1 4 1 2
1 4 1 2 1 2
1 CM / .1 MIL
1 CM / .1 MIL
*Low Profile Fingered Adjustments
51
TACTICAL ADVISORY PRO STAFF
Dave Neth, Mark Hanish, Charles Tate Moots (L to R)
Tony Holmes, Tasha Hanish, Kelly Neal Not shown in group photo: Adam Popplewell Practical Sponsored Shooter: Travis Gibson
Mark Hanish has traveled the world as a competitive shooter since 1996, attaining the rank of USPSA Grandmaster, the highest possible classification. He is also one of the founders of the Scottsdale Gun Club, the worlds largest indoor shooting facility.
Tasha Hanish has been a competitive shooter since 1994 and her most recent accomplishments include Top Lady at the 2009 USPSA Multigun Nationals as well as the DPMS TriGun Challenge, Rocky Mountain 3-Gun and Industry Masters.
Charles Tate Moots has a deep background in law enforcement as well as competitive tactical shooting. Those combined backgrounds have earned him 8 Police Olympics medals, including 5 golds.
Team Leupold consists of some of the most elite tactical competition shooters, combat operators and military instructors ever assembled. Their combined knowledge and experience is evident in every Leupold Tactical Optics product.
Tony Holmes has been a competitive shooter since 1974 and counts the Overall Open Championship of the 2006 DPMS 3-Gun Challenge among his many wins. Dave Neth is an experienced law enforcement officer and has been the first place finisher in the Law Enforcement category in more than 20 matches during his shooting career.
Robbie Johnson is a former U.S. Army Ranger and sniper who works for Remington Defense.
Bennie Cooley is a world-class instructor for elite military and law enforcement units and the winner of five USPSA and three World 3-Gun Championships, two National SWAT Team Championships and a World Sniper Championship.
Kelly Neal first appeared atop Arizonas Distinguished Shooters list over 20 years ago and continues to dominate with several commanding victories.
SP
ARTA N
TA
CTICAL
Blake Manning is seventeen years old and lives in Franklinton, LA. He began shooting in USPSA handgun and NRA multi-gun events in November of 2008 after five years of playing football. In October of the same year, he attended the US Army Marksmanship Units USPSA Junior Camp at Ft. Benning in Columbus, GA and shot in his first competitive USPSA match in Georgia one month later.
Kyle Lamb is a 21-year veteran of the U.S. Army with over 18 years in the Special Operations community. He was decorated for valor on the battlefield in Somalia and Iraq and literally brings a boots on the ground perspective to Leupold Tactical Optics.
James Smith is a well respected member of the Special Operations community having been an Airborne Ranger, Special Forces Engineer and a special ops operator. A highly skilled instructor with over 25 years experience in training the militarys most elite units.
53
PROUD LAW ENFORCEMENT SUPPORTER

In addition to providing military and law enforcement agencies with the superior optics they need to fulfill their missions, Leupold is proud to be a member of the following organizations: AUSA Association of the United States Army HAVA Honored American Veterans Afield IALEFI The International Association of Law Enforcement Firearms Instructors NDIA National Defense Industrial Association NTOA The National Tactical Officers Association NRA The National Rifle Association NSSF National Shooting Sports Foundation PVA Paralyzed Veterans of America MCA Marine Corps Association
THE LEUPOLD FULL LIFETIME GUARANTEE Leupold & Stevens, Inc. is an American, family-owned, fifth generation company that has been designing, machining, and assembling precision optical instruments for over 100 years. Leupolds success has been built on our commitment to your absolute satisfaction, and our commitment to building the best optics for the shooting sports and for the law enforcement/military communities. Its for these reasons that we offer the Leupold Full Lifetime Guarantee. If any Leupold Golden Ring product is found to have defects in materials or workmanship, we will, at our option, repair or replace it. FREE. Even if you are not the original owner. No warranty card is required. No time limit applies. The above is the Leupold & Stevens, Inc. commercial warranty policy. Military contracts may specify warranty policies that are different from this policy and supersede it. Warranties on Leupold Tactical optical product may vary depending on use and other factors. LEUPOLD DUAL-USE All Leupold optics offer performance that makes them equally at home in hunting or tactical environments. DOC PRODUCTS A Department of Commerce Export License may be required to certain countries under the Bureau of Industry and Security Export Administration Regulations, EAR (15 CFR, Parts 730-774). Diversion contrary to U.S. law is prohibited. ITAR PRODUCTS A U.S. Department of State License is required for the Export & Import of ALL products under the International Traffic in Arms Regulations (22 CFR, Parts 120-130) ALUMINA; AMERICAS OPTICS AUTHORITY; BALLISTIC AIMING SYSTEM; CQ/T; DARK EARTH; DUPLEX; ER/T; GOLDEN RING and the Golden Ring design; INDEX MATCHED LENS SYSTEM; KATMAI; the L design and medallion; LEUPOLD; LPS; LR/T; LR DUPLEX; LRV DUPLEX; LX; MARK 4; MR/T; MULTICOAT 4; RAINCOTE; RIFLEMAN; RX; SPR; TACTICAL MILLING RETICLE; TBR; TMR; TRUE BALLISTIC RANGE; TURKEY PLEX; VARI-X; VX; VX-L; and ZERO POINT are registered trademarks of Leupold & Stevens, Inc., Beaverton, Oregon. ADVANCED IMAGE OPTIMIZATION; BZ; CASCADES; CIRCLE PLEX; CLEAR FIELD; CPC; COMPOSITE MATTE BLACK; DIAMONDCOAT; DIAMONDCOAT 2; DIGITAL INSTRUMENT PANEL; DUAL DOVETAIL; FX; GREEN RING; GX; HD; HIGH DEFINITION; INFINITE POWER BAND; INTENSIFIER; L-250; L-COAT; LEUPOLD DOT; LIGHT OPTIMIZATION PROFILE; MARK2; MATCH 13; MESA; MOJAVE; MX; OG; ONE-TIME FOCUS; OP; OPTIMIZER; PINNACLES; PLUS POINT; PRW; PRISMATIC; QR; QRW; QUICK RELEASE; QUICK SET ROTARY MENU; RAIN SHED; RXB; SEQUOIA; SPEEDIAL; STD; SWITCH/POWER and the X logo; TLT; TOTAL LIGHT THROUGHPUT; TROPHY SCALE; ULTRALIGHT; VX-7; VX7L; XT DUPLEX; XTENDED TWILIGHT LENS SYSTEM; X-TREME; YL and YOSEMITE are trademarks of Leupold & Stevens, Inc., Beaverton, Oregon. MOSSY OAK BRUSH and MOSSY BREAK UP are trademarks or registered trademarks of Haas Outdoors, Inc. A.R.M.S. is a registered trademark of Atlantic Research Marketing Systems, Inc. We reserve the right to make design and / or material modifications without prior notice. Leupold products are manufactured under one or more of the following patents: U.S. Patents: 5,035,487; 5,231,535; 5,479,712; 5,671,088; 5,866,048; 5,941,775; 6,005,711; 6,279,259; 6,295,754; 6,327,806; 6,351,907; 6,359,418; 6,469,829; 6,519,890, 6,691,447; 6,816,305; 7,088,506; 7,177,087; 7,185,455; 7,275,343; 7,375,881; D403,393; D413,153; D414,835; D415,546; D416,972; D420,718; D420,807; D421,286; D427,658; D490,097; D506,520; D512,449; D517,153; D519,537; D532,477; D532,803; D536,762; D542,879; D562,428; D566,309; D584,376; D587,333; D589,544; D589,581; D590,970; D594,495. Foreign Patents: BX30938-00; CA-Rd./ Enr.1999-88472; CN-ZL200530119334.2; CN-ZL200530138463.6; DE49903766.9; DE69216763T; DE-M9304093.8; DE202005017276U1; EM59613; EM393467; EP0540368; GB0540368; IL31338; IT75604; JP1074623; SE55201; TW148948; ZA2003/8164. Printed in the U.S.A. This publication may not be reprinted or otherwise reproduced without the expressed written consent of Leupold & Stevens, Inc. Copyright 2010 Leupold & Stevens, Inc. All rights reserved. *Use of military imagery does not imply or constitute U.S. Department of Defense endorsement.
CONTACTING LEUPOLD PRODUCT SERVICE

Leupold & Stevens, Inc. PO Box 688 Beaverton, OR 97075-0688 Phone: 1-800-LEUPOLD or (503) 526-1400 8:00 a.m.-4:30 p.m. PST M-F Fax: (503) 352-7621 24 hours a day, seven days a week E-mail: tacticaloptics@leupold.com To locate dealers near you, call 1-800-LEUPOLD or (503) 526-1400, or visit our Web site at www.leupold.com. To find great places to shoot in your area, visit www.wheretoshoot.org. To send a product to Leupold Product Service: By Parcel Service: Leupold & Stevens, Inc. Attn: Product Service Dept. 14400 NW Greenbrier Parkway Beaverton, OR 97006-5790 USA By Mail: Leupold & Stevens, Inc. Attn: Product Service Dept. PO Box 688 Beaverton, OR 97075-0688 USA
Customers in Canada may send their products to Leupold Canada for service: Leupold Canada Jim Korth Agencies, Ltd 103 Stockton Point Box 490 Okotoks, AB T1S 1A7, Canada Phone: (403) 938-3255 Fax: (403) 938-2722
LEUPOLD & STEVENS, INC., PO BOX 688, BEAVERTON, OR 97075-0688 14400 NW GREENBRIER PARKWAY, BEAVERTON, OR 97006-5790 USA 1-800-LEUPOLD WWW.LEUPOLD.COM

2011 Leupold Tactical Catalog

Uploaded by

Copyright:

Available Formats

2011 Leupold Tactical Catalog

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

2011 Leupold Tactical Catalog

Uploaded by

Copyright:

Available Formats

2 0 1 1 TA C T I C A L P R O D U C T S C ATA L O G

At the range, on the hunt, in the field.

10T ER 150 370 (PORTLAND, OR)

MARK 4 ER/T M5 AUTO-LOCKING

BATTLEFIELD UPGRADE & M5 DIALS

MARK 4 ER/T RIFLESCOPES

1.1-8x24mm NEW >>

6.5-20x50mm NEW >>

4.5-14x50mm M1/M3 8.5-25x50mm M5 NEW >>

34-35 36-37 38 39-41 42-43 44-49 50 51 52-53

LR/T FIXED POWER RIFLESCOPES

MARK 4 LR/T RIFLESCOPES

MARK 4 MR/T RIFLESCOPES

10x40mm M1/M3 16x40mm M1

3.5-10x40mm M1/M2/M3 4.5-14x40mm Target/M1 6.5-20x50mm M1 8.5-25x50mm M1

4x24mm NEW >> Pg. 18-19

1.5-5x20mm M1/M2 2.5-8x36mm M1/M2

1.5-4x20mm 3-9x40mm T2 4-12x40mm T2 6-18x40mm T1

GOLDEN RING SPOTTING SCOPES

MOUNTS, BASES & RINGS

10-20x40mm 15-30x50mm 12-40x60mm

10x50mm 6x32mm 8x32mm 10x32mm 7x42mm 8x42mm 10x42mm

RX-IV NEW >> RX-1000i RX-750 TBR RX-600

Mark 4 PRW/QRW Integral Mounting Systems

MARK 8 CQBSS 1.1-8X24MM FRONT FOCAL

MARK 8 INTEGRATED MOUNTING SYSTEM (IMS)

RETICLE PART NO.

MARK 4 ER/T M5 LOCKING

15S YV 482 400 (TIER 1 GROUP COMPOUND, WEST MEMPHIS)

MARK 4 ER/T M5 AUTO-LOCKING ADJUSTMENT

Contract rifle for Remington XM2010

the leupold mark 4

ready for deployment

BULLET DROP COMPENSATION OPTIONS

CQ/T CIRCLE DOT (ILLUMINATED)

MIL DOT (ILLUMINATED)

38S ME 436 300 (KIRKUK, IRAQ)

MARK 4 ER/T RIFLESCOPES

ER/T 4.5-14X50MM M1 FRONT FOCAL

RETICLE PART NO.

8.5-25x50mm M5 Front Focal

(ALSO AVAILABLE IN M5)

MARK 4 LR/T FIXED POWER

MARK 4 LR/T FIXED POWER

RETICLE PART NO.

42S WB 790 910 (KHOST, AFGHANISTAN)

MARK 4 LR/T RIFLESCOPES

41S NS 940 009 (MIZAN, AFGHANISTAN)

MARK 4 LR/T RIFLESCOPES

LR/T 3.5-10X40MM M3 FRONT FOCAL

LR/T 3.5-10X40MM M2 ILLUM. RETICLE

LR/T 3.5-10X40MM M1 ILLUM. RETICLE

RETICLE PART NO.

MARK 4 LR/T RIFLESCOPES

MARK 4 LR/T RIFLESCOPES

LR/T 6.5-20X50MM M1 ILLUM. RETICLE

LR/T 8.5-25X50MM M1 ILLUM. RETICLE

42S YD 007 707 (KUNAR PROVINCE, AFGHANISTAN)

MARK 4 HAMR 4X24MM WITH DELTAPOINT

MARK 4 HAMR MODELS