It Dim 20 100-277 500 P5

www.osram.
com
Product Datasheet
IT DIM 20/100-277/500 P5
Constant Current 0-10V LED driver
ICUTRONIC® LED Power Supply fits in light fixtures for

office, shop lighting or other indoor applications that
require high quality of light. The reliable driver for energy
saving lighting.
Benefits
Continuous dimming from 1% to 100%, dim to off.

Small size enables compact fixture design
High compatibility with COBs and discrete LEDs.
Unit
Inch Millimeter
Size
Applications Case Length 3.44 87.5
Office - Shop - Hospitality Case Width 1.44 36.5
Spotlights, Ceiling lamp Case Height 0.94 24.0
Panels and other indoor luminaires
Mounting Length 3.15 80.0
Approvals (In preparation, if not printed on product label)
Housing material: plastic, white

Product Weight: 125g
Product Features
- Fixed Output Current - High PF > 0.9 and Low THD < 20 %
- Output voltage: 21 VDC – 42VDC - Ta: -40℃ - 50℃ and Tc: 90℃
- Typ. Efficiency: 83 % - Continuous dimming 1...100%, dim to off.
- Low stand-by consumption < 0.5 W - 50,000 hours lifetime at tc 85℃.
Edition: May. 2023 Ver: 1.0 Status: Released Page 1/4

Electrical Specifications
Item Value Unit Remarks
Nominal Voltage 100 – 277 V
Nominal frequency 50 / 60 Hz
AC voltage range 90 – 305 V
DC voltage range n/a V
Maximum voltage n/a VAC
AC Nominal current (120V) 0.20 A Full load, 120V, 60Hz
DC Nominal current n/a A
Total Harmonic Distortion (THD) < 20 % Full load, 100 – 277V 50/60Hz
Power factor > 0.9 Full load, 100 – 277V 50/60Hz
INPUT
Efficiency 83 % Full load, 230V, 50Hz

Power losses TBD W
No-load power n/a W
Network stand-by power < 0.5 W
Protection class Class 2
Start-up time < 0.5 s Without dimmer
Leakage current < 0.7 mA
Inrush current 1 9.88 A pk twidth = 10 µs typical (measured at 50%
Ipeak), 120V 60Hz
Inrush current 2 11.52 A pk twidth = 10 µs typical (measured at 50%
Ipeak), 277V 60Hz
Max. units per circuit breaker B10: 27; C10: 31 pcs 120V 60Hz
B16: 43; C16: 50
Max. units per circuit breaker B10: 61; C10: 72 pcs 277V 60Hz
B16: 99; C16: 115
Nominal voltage range 21 – 42 V
Maximum voltage ≤ 59 V Open circuit
Nominal current 500 mA
OUTPUT
Output Current Overshoot < 10 %

Current accuracy +/- 5 %
Nominal power range 10.5 - 20.5 W Partial Load.
Maximum power 20.5 W Ta ≤ Max.
Galvanic isolation Class 2
Dimming control Yes 0 - 10V/PWM/R-SET
Dimming range 1 -100 %
Dimming technique Constant Current Reduction (CCR)
DIM
0 - 10V Input Absolute Voltage -2.0 - 15 V

PWM frequency n/a Hz
Galvanic isolation 0-10V/mains Class 2
Galvanic isolation 0-10V/output Class 2
Ambient temperature range ta -40 …+50 °C
Maximum case temperature tc 90 °C Measured on tc point indicated on the
product label.
ENVIRONMENT
Max. case temp. in fault condition 110 °C

Storage temperature range -40…+85 °C
Relative humidity 5…95 % Not condensing
Ring Wave 2.5 KV Differential mode
Environmental rating Indoor
Acoustic Noise < 24 dBA Class A at 1 meter
IP rating IP 65 NEMA4 compliant for dry, damp.
Mains switching cycles > 100’000
Expected lifetime 50,000 hrs @Tc = 85 °C, 10% failure rate
Over temperature Yes
PROTECTION
Overload Yes Locked, need to restart

No load Yes Limitation of Output voltage ≤ 59V
S
Short-circuit Yes Automatic, reversible

Output overvoltage Yes Limitation of Output voltage ≤ 59V

Electrical characteristics
% Iout vs Vdim
100
90
80
70
60
% Iout
50
40
30
20
10
10.0
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
2.2
2.4
2.6
2.8
3.0
3.2
3.4
3.6
3.8
4.0
4.2
4.4
4.6
4.8
5.0
5.2
5.4
5.6
5.8
6.0
6.2
6.4
6.6
6.8
7.0
7.2
7.4
7.6
7.8
8.0
8.2
8.4
8.6
8.8
9.0
9.2
9.4
9.6
9.8
Vdim: 0-10V Input Volts
*Note:
1. The dimming curve is linear.
2. Vdim_ON is 1.2V, Vdim_OFF is 1.0V. Driver goes into standby state, when Vdim is less than 1.0V.

Product Drawing
Hot plug-in or secondary switching of LEDs is not permitted and may cause a very high current to the LEDs.
Warning:
1. The DIM+ line can’t be shorted with DC+ line and AC line.
2. DC- can’t be shorted with the DIM-.
Standards
UL8750 Product name EAN10 EAN40 Pieces / box

UL1310 IT DIM 20/100-277/500 P5 4062172373678 4062172373685 50
FCC 47CFR Part 15
Disclaimer
Subject to change without notice. Errors and omission accepted. Always make sure to use the most recent
release. The latest release of the datasheet is available under the following link www.osram.com

It Dim 20 100-277 500 P5

Uploaded by

Copyright:

Available Formats

It Dim 20 100-277 500 P5

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

It Dim 20 100-277 500 P5

Uploaded by

Copyright:

Available Formats

www.osram.

ICUTRONIC® LED Power Supply fits in light fixtures for

Continuous dimming from 1% to 100%, dim to off.

Approvals (In preparation, if not printed on product label)

Housing material: plastic, white

- Typ. Efficiency: 83 % - Continuous dimming 1...100%, dim to off.

- Low stand-by consumption < 0.5 W - 50,000 hours lifetime at tc 85℃.

Edition: May. 2023 Ver: 1.0 Status: Released Page 1/4

Efficiency 83 % Full load, 230V, 50Hz

Output Current Overshoot < 10 %

0 - 10V Input Absolute Voltage -2.0 - 15 V

Max. case temp. in fault condition 110 °C

Overload Yes Locked, need to restart

Short-circuit Yes Automatic, reversible

Edition: May. 2023 Ver: 1.0 Status: Released Page 2/4

Edition: May. 2023 Ver: 1.0 Status: Released Page 3/4

UL8750 Product name EAN10 EAN40 Pieces / box

Edition: May. 2023 Ver: 1.0 Status: Released Page 4/4

You might also like