HVS2000MV - Install E E1
HVS2000MV - Install E E1
HVS2000MV - Install E E1
GUIDE
HVS-2000MV
HVS-2000 Multi Viewer Expansion Card
1st Edition
1. Prior to Starting
1-1. Unpacking
HVS-2000MV cards and their accessories are fully inspected and adjusted prior to shipment.
Check your received items against the packing list below.
Installing this option, which requires accessing the unit interior by opening
the panel, should only be done by qualified technical person. Power should
be turned OFF and all power cords disconnected from the unit before this
installation is performed.
CAUTION
2
2. Installing the HVS-2000MV
(1) Release the two screws at both sides securing the front panel to remove the panel.
HVS-2000
DIGITAL VIDEO SWITCHER
POWER 1
ON
ALARM
OFF
POWER 2
ON
ALARM
OFF
Screw POWER 3
ON
Screw
ALARM
OFF
(2) Insert the HVS-2000MV card into the second slot from the top.
HVS-2000MV card
(3) Tighten the two screws at both sides to secure the front panel to the chassis.
HVS-2000
DIGITAL VIDEO SWITCHER
POWER 1
ON
ALARM
OFF
POWER 2
ON
ALARM
OFF
Screw POWER 3
ON
Screw
ALARM
OFF
3
3. Checking the Menu
(1) Connect power cords and power ON the switcher system. Open the STATUS menu to verify
that the HVS-2000MV is properly displayed in the menu.
4
November 25, 2015 Printed in Japan
http://www.for-a.com/