Datasheet 4
Datasheet 4
Datasheet 4
DESCRIPTION 3
2
This power MOSFET is designed using the 1
APPLICATIONS
■ HIGH CURRENT SWITCHING
■ UNINTERRUPTIBLE POWER SUPPLY (UPS) INTERNAL SCHEMATIC DIAGRAM
■ DC/DC COVERTERS FOR TELECOM,
INDUSTRIAL, AND LIGHTING EQUIPMENT.
THERMAL DATA
o
R t hj-ca se Thermal Resistance Junction-case Max 0.66 C/W
Rthj -amb Thermal Resistance Junction-ambient Max 30 oC/W
o
R thc- si nk Thermal Resistance Case-sink Typ 0.1 C/W
o
Tl Maximum Lead Temperature For Soldering Purpose 300 C
AVALANCHE CHARACTERISTICS
Symb ol Parameter Max Valu e Unit
I AR Avalanche Current, Repetitive or Not-Repetitive 14 A
(pulse width limited by Tj max)
E AS Single Pulse Avalanche Energy 800 mJ
(starting Tj = 25 o C, I D = IAR , VDD = 50 V)
ON (∗)
Symb ol Parameter Test Cond ition s Min. Typ . Max. Un it
V GS(th) Gate Threshold V DS = VGS ID = 250 µA 2 3 4 V
Voltage
R DS( on) Static Drain-source On V GS = 10V ID = 8.4 A 0.33 0.4 Ω
Resistance
ID(o n) On State Drain Current V DS > I D(on) x R DS(on) max 14 A
V GS = 10 V
DYNAMIC
Symb ol Parameter Test Cond ition s Min. Typ . Max. Un it
g fs (∗) Forward V DS > I D(on) x R DS(on) max I D = 8.4 A 9.3 13 S
Transconductance
C iss Input Capacitance V DS = 25 V f = 1 MHz VGS = 0 2600 pF
C oss Output Capacitance 330 pF
C rss Reverse T ransfer 40 pF
Capacitance
2/8
IRFP450
SWITCHING OFF
Symb ol Parameter Test Cond ition s Min. Typ . Max. Un it
t r(Vof f) Off-voltage Rise Time V DD = 400 V I D = 14 A 15 ns
tf Fall Time R G = 4.7 Ω V GS = 10 V 25 ns
tc Cross-over Time (see test circuit, figure 3) 35 ns
3/8
IRFP450
4/8
IRFP450
5/8
IRFP450
Fig. 1: Unclamped Inductive Load Test Circuit Fig. 1: Unclamped Inductive Waveform
Fig. 3: Switching Times Test Circuits For Fig. 4: Gate Charge test Circuit
Resistive Load
6/8
IRFP450
mm inch
DIM.
MIN. TYP. MAX. MIN. TYP. MAX.
A 4.7 5.3 0.185 0.209
G 10.9 0.429
L4 34.6 1.362
L5 5.5 0.217
M 2 3 0.079 0.118
P025P
7/8
IRFP450
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences
of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is
granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specification mentioned in this publication are
subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products
are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics.
The ST logo is a registered trademark of STMicroelectronics