 BUZ11A

N - CHANNEL 50V - 0.045Ω - 26A TO-220

STripFET MOSFET
T YPE V DSS R DS(on) ID
BUZ11A 50 V < 0.055 Ω 26 A
■ TYPICAL RDS(on) = 0.045 Ω
■ AVALANCHE RUGGED TECHNOLOGY
■ 100% AVALANCHE TESTED
■ HIGH CURRENT CAPABILITY
■ 175oC OPERATING TEMPERATURE
3
2
1

APPLICATIONS TO-220
■ HIGH CURRENT, HIGH SPEED SWITCHING
■ SOLENOID AND RELAY DRIVERS

■ REGULATORS

■ DC-DC & DC-AC CONVERTERS

■ MOTOR CONTROL, AUDIO AMPLIFIERS

■ AUTOMOTIVE ENVIRONMENT (INJECTION, INTERNAL SCHEMATIC DIAGRAM

ABS, AIR-BAG, LAMPDRIVERS, Etc.)

ABSOLUTE MAXIMUM RATINGS

Symbol Parameter Value Un it
V DS Drain-source Voltage (VGS = 0) 50 V
V DGR Drain- gate Voltage (R GS = 20 kΩ) 50 V
V GS G ate-source Voltage ± 20 V
o
ID Drain Current (continuous) at Tc = 25 C 26 A
IDM Drain Current (pulsed) 104 A
o
P tot T otal Dissipation at Tc = 25 C 75 W
o
Ts tg Storage Temperature -65 to 175 C
o
Tj Max. Operating Junction Temperature 175 C
DIN HUMIDITY CAT EGORY (DIN 40040) E
IEC CLIMAT IC CAT EG ORY (DIN IEC 68-1) 55/150/56
First digit of the datecode being Z or K identifies silicon characterized in this datasheet.

July 1999 1/8

BUZ11A

THERMAL DATA
o
R thj -case Thermal Resistance Junction-case Max 1.67 C/W
o
R thj -amb Thermal Resistance Junction-ambient Max 62.5 C/W

AVALANCHE CHARACTERISTICS
Symbo l Parameter Valu e Unit
IAR Avalanche Current, Repetitive or Not-Repetitive 30 A
(pulse width limited by Tj max, δ < 1%)
E AS Single Pulse Avalanche Energy 120 mJ
(starting Tj = 25 o C, ID = IAR , V DD = 30V)

ELECTRICAL CHARACTERISTICS (Tcase = 25 oC unless otherwise specified)

OFF
Symbo l Parameter Test Con ditions Min. Typ. Max. Unit
V (BR)DSS Drain-source I D = 250 µA V GS = 0 50 V
Breakdown Voltage
I DSS Zero Gate Voltage V DS = Max Rating 1 µA
Drain Current (V GS = 0) V DS = Max Rating Tj = 125 oC 10 µA
IGSS Gate-body Leakage V GS = ± 20 V ± 100 nA
Current (VDS = 0)

ON (∗)
Symbo l Parameter Test Con ditions Min. Typ. Max. Unit
V GS(th) Gate Threshold Voltage V DS = V GS ID = 1 mA 2.1 3 4 V
R DS(on) Static Drain-source On V GS = 10 V ID = 19 A 0.045 0.055 Ω
Resistance

DYNAMIC
Symbo l Parameter Test Con ditions Min. Typ. Max. Unit
g f s (∗) Forward V DS = 25 V I D = 19 A 10 17 S
Transconductance
C iss Input Capacitance V DS = 25 V f = 1 MHz V GS = 0 1400 pF
C os s Output Capacitance 200 pF
C rss Reverse Transfer 50 pF
Capacitance

SWITCHING
Symbo l Parameter Test Con ditions Min. Typ. Max. Unit
t d(on) Turn-on Time V DD = 30 V ID = 15 A 18 ns
tr Rise Time R GS = 4.7 Ω V GS = 10 V 95 ns
t d(of f) Turn-off Delay T ime 50 ns
tf Fall T ime 20 ns

2/8
 BUZ11A

ELECTRICAL CHARACTERISTICS (continued)

SOURCE DRAIN DIODE
Symbo l Parameter Test Con ditions Min. Typ. Max. Unit
ISD Source-drain Current 26 A
I SDM Source-drain Current 104 A
(pulsed)
V SD (∗) Forward On Voltage I SD = 60 A V GS = 0 1.8 V
t rr Reverse Recovery I SD = 26 A di/dt = 100 A/µs 85 ns
Time V DD = 30 V T j = 150 o C
Q rr Reverse Recovery 0.19 µC
Charge
(∗) Pulsed: Pulse duration = 300 µs, duty cycle 1.5 %

Safe Operating Area Thermal Impedance

3/8
BUZ11A

Output Characteristics Transfer Characteristics

Transconductance Static Drain-source On Resistance

Gate Charge vs Gate-source Voltage Capacitance Variations

4/8
 BUZ11A

Normalized Gate Threshold Voltage vs Normalized On Resistance vs Temperature

Temperature

Source-drain Diode Forward Characteristics

5/8
BUZ11A

Fig. 1: Unclamped Inductive Load Test Circuit Fig. 2: Unclamped Inductive Waveform

Fig. 3: Switching Times Test Circuits For Fig. 4: Gate Charge test Circuit
Resistive Load

Fig. 5: Test Circuit For Inductive Load Switching

And Diode Recovery Times

6/8
 BUZ11A

TO-220 MECHANICAL DATA

mm inch
DIM.
MIN. TYP. MAX. MIN. TYP. MAX.
A 4.40 4.60 0.173 0.181
C 1.23 1.32 0.048 0.051
D 2.40 2.72 0.094 0.107
D1 1.27 0.050
E 0.49 0.70 0.019 0.027
F 0.61 0.88 0.024 0.034
F1 1.14 1.70 0.044 0.067
F2 1.14 1.70 0.044 0.067
G 4.95 5.15 0.194 0.203
G1 2.4 2.7 0.094 0.106
H2 10.0 10.40 0.393 0.409
L2 16.4 0.645
L4 13.0 14.0 0.511 0.551
L5 2.65 2.95 0.104 0.116
L6 15.25 15.75 0.600 0.620
L7 6.2 6.6 0.244 0.260
L9 3.5 3.93 0.137 0.154
DIA. 3.75 3.85 0.147 0.151
E
A

D
C

D1

L2
F1

G1

H2
G

Dia.
F
F2

L5
L9
L7

L6 L4
P011C

7/8
 BUZ11A

Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibil ity for the consequences
of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is
granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specific ation mentioned in this publication are
subjec t to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products
are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics.
The ST logo is a trademark of STMicroelectronics

 1999 STMicroelectronics – Printed in Italy – All Rights Reserved

STMicroelectronics GROUP OF COMPANIES
Australia - Brazil - China - Finland - France - Germany - Hong Kong - India - Italy - Japan - Malaysia - Malta - Morocco -
Singapore - Spain - Sweden - Switzerland - United Kingdom - U.S.A.

http://www.st.com
8/8 .