Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

BWC Constr.

Download as pdf or txt
Download as pdf or txt
You are on page 1of 7

BUILD WARRIER CONSTRUCTION

Client Name : Mr.Narayanan

Address : Mullikolathur, Thirukazhukundram(Taluk)

Site Location : Mullikolathur,

Type of Structure : RCC Framed Structure


Subject : Quotation for construction work

We pleased to quote for building contract rate, including materials Ground floor 1980

Construction of a residential building including supplying of materials as per the below


mentioned specification, located at Mullikolathur.
Building Specification
1. Foundation Stage:-

 Marking and earthwork excavation as per the “GOOD FOR CONSTRUCTION” drawing
from the structural consultant.
 The earth work excavation to be done by mechanically/manually.
 Prepare and Laying of Dual Sand as per the recommended 100mm depth from theGOOD
FOR CONSTRUCTION drawing,
 Prepare and Laying of PCC 1:2:4 Mix – 100mm thick / Suggested Mix ratio as per
the GOOD FOR CONSTRUCTION drawing,
 Prepare and Fabricate the reinforcement by ISI-TMT Bars satisfies the requirement of
ASTM (American standards for testing of Materials) .
 Prepare and Laying of Concrete for Footings / Piling / Columns and Plinth beams by
RCC 1:1.5:3(M20) and 1:1:2 (M25) Mix / Suggested Mix ratio as per the GOOD FOR
CONSTRUCTION drawing,

2. Basement Stage:-

 Preparation of Brickwork for a basement level Using first class bricks in CM 1:6 With
necessary pointing.
 Basement height will be followed by 600mm to 1000mm from ground level
 Preparing the basement by filling available excavated earth/ Appropriate backfilling
material with necessary consolidation.
 Preparation and application of ATT (Anti-/termite Treatment) to sub structures.
 Prepare and Laying of basement flooring by PCC 1:2:4 Mix – 100mm Thick /
SuggestedMix ratio as per the “GOOD FOR CONSTRUCTION” drawing.

3. Column Rising & Brickwork for Superstructure:-

 Providing and Laying of Concrete for Columns /Cut Lintels, Chajja and Sunshades by
RCC 1:1.5:3(M20) and 1:1:2 (M25) Mix / Suggested Mix ratio as per the GOOD FOR
CONSTRUCTION drawing,
 Preparation of Brickwork for a basement level Using first class bricks in CM 1:6 for
230mm thick walls and CM: 1:4 for 115mm thick partition walls with necessary pointing.
 Staircase handrail will be provided with steel grill handrails up to a height of 750mm.
 All the window openings will contain necessary sunshades, which will be 600mm wide
and length 450mm more than the length of the window.

4. Roof shuttering & Concreting:-

 Prepare the roof slab by using Clean shuttering Sheets {2’x3’) with Flat surfaces with
adequate (brazing) supports.
 Standard height of roof slab 3m will be provided, if requires exceed in height will be
charges extra.
 Parapet wall will be of 115mm thick brick wall in C.M.1:4.upto 900mm height
 Providing and Laying of Concrete for Roof by RCC 1:1.5:3(M20) and 1:1:2 (M25)
Mix / Suggested Mix ratio as per the GOOD FOR CONSTRUCTION drawing,
 Necessary Curing period applied for Roof slabs Min 10 days max 15 days .
 Deshuttering for columns&beam minimum 1day.
 Roof slab shuttering removed after achieved 70% strength of Concrete ( At least
minimum after 10 to 14 days )
 Cut lintel&chajja will be provided. Steel reinforcement for the lintel beam and chajja
will be done as per the structural design given.
 Loft will be provided as shown in the plan of 50mm thick in R.C.C. 1:2:4 in bedroom
and kitchen. Bedroom will contain a wardrobe as shown in the plan.

5. Carpentry Stage:-

 Prepare the Maindoor by 3’3” X 7’0” IN Size by a TEAK Wood with necessary
Varnishing or polishing.
 All bedroom doors by a flush doorwith necessary fixings.
 All Windows using UPVC frame and shutter with fiber glass.
 All toilet / Service rooms door will be provided by PVC Materials.
 Fabrication and fixing of necessary grill fixing for Windows by 12 Sq.mm bars.

6. Plumbing Stage :-

 Prepare all the water Lines and Sanitary lines using ISI Pipe materials.
 Necessary standard points in toilets such as Wall mixer /Geyser/Service taps /Shower
arm from a Metrofor Sanitary wares.
 EWC in Attached toilet and IWC in Common toilets and 1 Washbasin provision for
each dwelling unit.and 1 point will be given for Washing Machine.

7. Electrical Stage :-

 Prepare and wall chasing for all the Necessary electrical provision with Anchor / Finolex
pipe materials.
 Extra points will be considered such as AC Provision for Living &MasterBedroom.
 Provision of switches from the Anchor / Roma products.

8. Innerplastering ( Walls& Ceiling ):-

 Proper hacking of Columns beams and roof will be followed.


 Prepare and plastering the innerwalls using CM1:4 with necessary Brush/Sponge/Trowel
finishing.
 Prepare and Plastering the Ceiling using CM1:3 with necessary Brush/Sponge/Trowel
finishing.
 Necessary Curing period of Minimum 7 days Will be followed.

9. Externalwallplastering:-

 Proper hacking of Columns and beams will be followed.


 Prepare and Plastering the walls using CM1:5.with necessary Brush/Sponge/Trowel
finishing.
 RCC and masonry joints are fixed with chicken mesh for preotecting the cracks between
column wall joints.
 Necessary Curing period of Minimum 7 days Will be followed.

10. Flooring:-

 Flooring will be provided by Vitrified tiles size 600mm x 600mm @rate of Rs. 50/-
per Sq.ft. and skirting will be same vitrified tiles of height 100mm.
 Kitchen Wall tiles will be laying above 600mm from kitchen platform stage. Toilet
wall tiles laying up to 2.1m from FFL.
 Kitchen and Bathroom wall tiles @ rate of Rs. 40/- per Sq.ft.
 Staircase area terracotta or Anti–skid tile flooring – (Rough) is Option able will be
provided.
 Kitchen plot form finishing with Granite and SS Sink provided along with drain board.
 Loft will be provided as shown in the plan of 50mm thick in R.C.C. 1:2:4 in bedroom
and kitchen.

11. Inner wall painting (Walls& Ceiling ):-

 Proper scrapping and cleaning of walls &ceiling will be followed.


 Providing and application of two coats of wall putty of Birla/JK wallcare putty for walls
 Touch up putty will be carried out before application of wall primer.
 Application of one coat of priming coat
 After Priming coat, two coats of emulsion painting will be carried out by Asian make
painting for walls.
 Scrapping and cleaning with one coat Oil based distemper for ceiling and over that one
coat of White will be provided.

12. Externalwallpainting:-

 Proper scrapping and cleaning of walls will be followed.


 Providing and painting with one coat of supercem will be provided for Walls.
 Afterwards two coats of Exterior Emulsion by ACE/Asian Product will be provided
for walls.

ELECTRICAL POINTS:

Electrical points will be provided as per table below:

5 Amps 15 Amps Calling Bell Telephone


Area Light Points Fan Points T.V. Point AC Point
plug point plug point point Point
Living 4 2 5 1 1 1 1 -
Room
1
Master 2 1 2 - 1 1 -
Bedroom (A/Cpoint
Kitchen 2 1 4 1 - - - -

Toilet 2 - 1 1 - - - -

Verandah 2 - - - - - - -

Staircase 1 - 1 - - - - -
15 Amps power point will be provided to both the bathroom.

NOTE:

Electrical work will be followed as per site condition.

QUALITY OF MATERIALS TO BE USED:


S.N
O. ITEMS QUALITY BRAND

1 Cement for concrete 53 Grade or equivalent Dalmia


2 Cement of brick work and
53 Grade or equivalent Penna / Chettinad
plastering work
3 Bricks Good quality -
4 Sand Good quality M sand
5 Blue metal Good quality
6 Steel ISI – TMT Bars ARS or equivalent
7 Wires Necessary gauge wires ISI Finolex, Orient, great
white
8 Switches Modular switches Anchor Roma
9 Sanitary ware Branded
10 Bath fittings ISI Brand Metro or Melbo CP
or Prince
11 Doors & windows paint Enamel Paint Asian
12 Bedroom doors Flush door Skin door
13 Main door Teak Wood Teak wood
14 Bathroom door PVC door Sintex
15 Windows UPVC W
16 Granite Good quality (Basic Cost –
Black colour
Rs.110/-per Sq.ft.)
17 Weathering course Tiles 8”x8” (Basic Cost –
B.T.W. Tile
Rs.12.50/-per Sq.ft.)
18 Flooring Vitrified Tiles 2”x2” (Basic
Any brand
Cost – Rs.50/-per Sq.ft.)
19 Bathroom tiles Ceramic tiles 12”x12”,
12”x16” (Basic cost-Rs.40/- Any brand
per Sq.ft.)
Note: If any variations in the basic rate of the above materials rate in the market, then the difference cost
shall be adjusted in the total bill amount.
Exclusive item of Work not covered by this Contract :-
 Construction of U/G Sump @ Rs 15 / Lit for Concrete , Rs 12/ Lit for Brickwork
 Construction of Septic tank @ Rs 15/ Lit for Concrete ,Rs 12/ Lit for Brickwork.
 Construction of Overhead tank @ Rs 12 /lit for Concrete ,Rs 10 / Lit for Brickwork.
 Provision of weathering course in open terrace / private terrace @ Rs 140 /Sq.ft..
 Provision of flooring in Outer area / Common area not covered by building area either
by GranoFlooring @Rs 50 for Paving Block @ Rs 60 /Sq.ft .
 Construction of Compound wall @ Rs 1300 /RftWith Augur Piling and Plinth
beam arrangement with Columns @ 10’ C/C., Height of the wall is 5’ (4½” thick).
 Fabrication and fixing of Car parking grill gate & Main door Safety grill gate Rs 80/ Kg.
 Elevation features if any extra beams, brickwork, Major structure created for elevation
Lumpsum as per work.
 Telephone point will be provided in both the bedroom and hall.
 Main board, one DB commercial, one DB residential and other accessories if it is
necessary, will be done at extra cost.
 All colums size should be 9”x9”, Slab steel following above 4m length of two way slab
using.

BUILD WARRIER CONSTRUCTION


PAYMENT DETAILS

S.NO. DESCRIPITION PERCENTAGE AMOUNT


Project finalised for Rs. 100%
1 Addvance 15%
2 Completion of Basement 20%
3 Ground floor Roof level 20%
4 Brickwork, Plastering 20%
5 Tiling, Painting, doors and other fixtures 22%
6 During Handover 3%

Date : 19-01-2024
Place : Manamai

Contractor Client

You might also like