Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 9 views

    UPM DT 1000PA Datasheet给客户

    Uploaded by

    coastaltrading99
    The UPM-DT-1000PA is Ohmic Instruments' newest ultrasound power meter that provides the fastest response time (under 3 seconds) and highest resolution (0.001 watts) for measuring ultrasound power. It uses the radiation force balance method to measure power by detecting the force exerted on a target by ultrasound radiation. The UPM-DT-1000PA has a measurement range of 0-30 watts, frequency range of 0.5-10MHz, and accuracy of ±3% at 10 watts. It is important to periodically test medical ultrasound equipment to ensure safe exposure levels are not exceeded.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    UPM DT 1000PA Datasheet给客户

    Uploaded by

    coastaltrading99
    9 views2 pages
    The UPM-DT-1000PA is Ohmic Instruments' newest ultrasound power meter that provides the fastest response time (under 3 seconds) and highest resolution (0.001 watts) for measuring ultrasound power. It uses the radiation force balance method to measure power by detecting the force exerted on a target by ultrasound radiation. The UPM-DT-1000PA has a measurement range of 0-30 watts, frequency range of 0.5-10MHz, and accuracy of ±3% at 10 watts. It is important to periodically test medical ultrasound equipment to ensure safe exposure levels are not exceeded.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The UPM-DT-1000PA is Ohmic Instruments' newest ultrasound power meter that provides the fastest response time (under 3 seconds) and highest resolution (0.001 watts) for measuring ultrasound power. It uses the radiation force balance method to measure power by detecting the force exerted on a target by ultrasound radiation. The UPM-DT-1000PA has a measurement range of 0-30 watts, frequency range of 0.5-10MHz, and accuracy of ±3% at 10 watts. It is important to periodically test medical ultrasound equipment to ensure safe exposure levels are not exceeded.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    9 views2 pages

    UPM DT 1000PA Datasheet给客户

    Uploaded by

    coastaltrading99
    The UPM-DT-1000PA is Ohmic Instruments' newest ultrasound power meter that provides the fastest response time (under 3 seconds) and highest resolution (0.001 watts) for measuring ultrasound power. It uses the radiation force balance method to measure power by detecting the force exerted on a target by ultrasound radiation. The UPM-DT-1000PA has a measurement range of 0-30 watts, frequency range of 0.5-10MHz, and accuracy of ±3% at 10 watts. It is important to periodically test medical ultrasound equipment to ensure safe exposure levels are not exceeded.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Phone (410) 820-5111 Ohmic Instruments

    Toll Free(800) 626-7713 3081 Elm Point Industrial Dr.


    Fax (410) 822-9633 St. Charles, MO 63301

    ULTRASOUND POWER METER MODEL UPM-DT-1000PA

    C US N13123
    Approved Electronics
    USB RS 232

    NEW
     FASTEST RESPONSE TIME: LESS THAN 3 SECONDS
     HIGHEST RESOLUTION: 1mW OR .1 mg IN GRAMS MODE
     MEASUREMENT RANGE: 0-30 WATTS
     FREQUENCY RANGE: .5 TO 10MHZ
     MEASURES TOTAL PULSED OR CONTINUOUS POWER
     AUTOMATIC ZEROING & STABILIZATION
     DIGITAL DISPLAY & RS-232 INTERFACE

    OHMIC Instruments Newest Model UPM-DT-1000PA on the arm of the target cone. (A 1-gram weight is
    provides the fastest response (under 3 seconds) and equal to 14.65 watts.) OHMIC also maintains NIST
    the highest resolution (0.001 watts) of any current traceable masses and ultrasound standards, therefore
    UPM-DT. The UPM-DT series have been in use the units can be returned for periodic recertification.
    worldwide since 1986 and conform to the testing
    The Importance of Calibrating Ultrasound Transducers
    guidelines recommended by FDA, JCAHO, AAMI and
    It is important to measure ultrasound power levels to
    AIUM. Power is measured by the radiation force
    verify correct patient exposure and reduce potential
    balance method. The accuracy of the UPM-DT’s are
    risks. All diagnostic and therapeutic Doppler and
    traceable to NIST.
    ultrasound equipment should be tested periodically.
    Principle of Operation Typical safe values are defined by the temporal
    The most reliable and repeatable means of measuring average intensity at the point in the acoustic field
    ultrasound power is the radiation force balance where the intensity is at its maximum value, referred to
    method. The transducer to be tested is centered as Spatial Peak Temporal Average (SPTA ). The FDA
    above a 45° air-backed cone target in water media, and AIUM provide guidelines for the maximum SPTA
    which is linked to a precision balance capable of values in medical applications. Typical safe SPTA
    resolving 0.1 mg. When acoustic energy is applied to values are 10mW/cm 2 for echo sounding, 100 mW/cm2
    the cone, the resultant force exerted on the load cell of for Doppler devices and 3W/cm2 for therapeutic use.
    the balance is directly proportional to the total radiated The watt density (watts/cm 2) of a transducer is
    power. The test tank is lined with sonic absorbent determined by measuring the total power output and
    rubber to prevent power reflection. The balance is dividing by the active cross sectional area of the
    programmed to convert milligram magnitude forces transducer. A sample form to document and report
    directly to a readout in watts with resolution to the ultrasound performance is included in the manual.
    nearest 0.001 watt. Verification of the UPM-DT-Series
    is easily accomplished by placing a calibrated weight

    WARRANTY: All products manufactured by OHMIC Instruments are warranted to be free of defects in material and workmanship
    for one year after delivery. Any equipment found to be defective within this period will be repaired or replaced free of charge.

    ISO 9001 Certified ISO 13485 Certified ISO 17025 Accredited

    SF-SLS-503 (D)
    SPECIFICATIONS - UPM-DT-1000PA

    UPM DT-1000PA
    Power Range 0- 30 Watts
    Resolution/Uncertainty 1 mW (.1mg in grams mode)
    Display Sensitivity 0.001 Watt
    Accuracy ± 3% @10 Watts, 25°C
    Zeroing Method Automatic
    Response Time <3.0 Seconds
    Maximum Transducer Size 4 1/2” Diameter
    Transducer Operating Frequency .5-10MHz
    Test Media Degassed Water
    Computer Interface RS-232, 600-19200 Baud
    Default Baud Rate 2400
    Power * * 120 VAC to 12 VAC 500 mA
    adapter with 6 Ft. cord
    EMC EMC 2004/108/EC, Low Voltage
    Directive 2006/95/EC, AS/NZS4251.1,
    AS/NZS5252.1
    CSA C&US CAN/CSA-C22.2 No. 1010.1-92
    UL Std No. 3101-1
    Electronic Compliance EN 61010-1:2001, EN 61326-1:2006
    Size 11”H x 15” L x 10”W
    Weight 16 Lbs Net
    Carrying Case Black Anodized Aluminum

    * Power packs and cord sets are available to meet any configuration or VAC needed.

    UPM-DT Series Ultrasound Power Meters feature a high


    contrast alphanumeric LCD display. Membrane “touch buttons” The rear panel of the UPM-DT-1000PA
    enable quick setup, automatic zero, selection of units for the Series showing the power connection and
    power reading (grams or Watts “custom”), and printer control. RS-232 port.

    ENGINEERING SUPPORT: OHMIC Instruments designs and manufactures a full line of environmental and bio-medical sensors,
    instruments and controls. Many of our products are custom designed to meet specific requirements. Our engineers will be
    pleased to discuss your application.

    Phone (410) 820-5111 Ohmic Instruments


    Toll Free(800) 626-7713 3081 Elm Point Industrial Dr.
    Fax (410) 822-9633 St. Charles, MO 63301

    ISO 9001 Certified ISO 13485 Certified ISO 17025 Accredited

    You might also like