Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 133 views

    Coolant (Hilux/1Kd-Ftv, 2Kd-Ftv (Tasa Made For Argentina) ) : Replacement

    Uploaded by

    jere aquino
    1. The document provides instructions for draining, refilling, and bleeding air from the cooling system of Toyota Hilux trucks with 1KD-FTV or 2KD-FTV engines made for Argentina. 2. Coolant should be drained from the radiator drain cock plug and reservoir, then the system refilled with Toyota Super Long Life Coolant to the reservoir's B-line. 3. After refilling, the cooling system needs to be bled of air by warming the engine and circulating coolant while pressing the radiator hoses, then checked for leaks once cooled down.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Coolant (Hilux/1Kd-Ftv, 2Kd-Ftv (Tasa Made For Argentina) ) : Replacement

    Uploaded by

    jere aquino
    133 views3 pages
    1. The document provides instructions for draining, refilling, and bleeding air from the cooling system of Toyota Hilux trucks with 1KD-FTV or 2KD-FTV engines made for Argentina. 2. Coolant should be drained from the radiator drain cock plug and reservoir, then the system refilled with Toyota Super Long Life Coolant to the reservoir's B-line. 3. After refilling, the cooling system needs to be bled of air by warming the engine and circulating coolant while pressing the radiator hoses, then checked for leaks once cooled down.

    Original Title

    m_16_0003

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1. The document provides instructions for draining, refilling, and bleeding air from the cooling system of Toyota Hilux trucks with 1KD-FTV or 2KD-FTV engines made for Argentina. 2. Coolant should be drained from the radiator drain cock plug and reservoir, then the system refilled with Toyota Super Long Life Coolant to the reservoir's B-line. 3. After refilling, the cooling system needs to be bled of air by warming the engine and circulating coolant while pressing the radiator hoses, then checked for leaks once cooled down.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    133 views3 pages

    Coolant (Hilux/1Kd-Ftv, 2Kd-Ftv (Tasa Made For Argentina) ) : Replacement

    Uploaded by

    jere aquino
    1. The document provides instructions for draining, refilling, and bleeding air from the cooling system of Toyota Hilux trucks with 1KD-FTV or 2KD-FTV engines made for Argentina. 2. Coolant should be drained from the radiator drain cock plug and reservoir, then the system refilled with Toyota Super Long Life Coolant to the reservoir's B-line. 3. After refilling, the cooling system needs to be bled of air by warming the engine and circulating coolant while pressing the radiator hoses, then checked for leaks once cooled down.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 3

    COOLING – COOLANT (HILUX/1KD–FTV, 2KD–FTV (TASA MADE 16–3

    FOR ARGENTINA))

    COOLANT (HILUX/1KD–FTV, 2KD–FTV (TASA MADE FOR


    ARGENTINA))
    1614F–01

    REPLACEMENT
    CAUTION:
    Do not remove the radiator reservoir cap while the engine and radiator are still hot. Pressurized, hot
    engine coolant and steam may be released and cause serious burns.
    1. DRAIN ENGINE COOLANT
    (a) Loosen the cylinder block drain cock plug and radiator
    drain cock plug.
    (b) Drain the coolant by removing the reservoir cap and, us-
    ing a wrench, remove the vent plug.
    HINT:
    Collect the coolant in a container and dispose of it according to
    the regulations in your area.
    A99591

    Vent Plug
    Radiator Reservoir Cap

    Radiator Reservoir Tank

    Cylinder Block Drain Cock Plug

    Radiator Drain Cock Plug


    A99250

    HILUX REPAIR MANUAL (Argentina) (DR201E)


    16–4 COOLING – COOLANT (HILUX/1KD–FTV, 2KD–FTV (TASA MADE
    FOR ARGENTINA))

    2. ADD ENGINE COOLANT


    (a) Tighten the radiator drain cock plug by hand.
    (b) Tighten the cylinder block drain cock plug.
    Torque: 8.0 N⋅m (82 kgf⋅cm, 71 in.⋅lbf)

    (c) Fill the radiator with TOYOTA Super Long Life Coolant
    (SLLC) to the reservoir tank’s B line.
    B Line
    Standard:
    Type Capacity
    A/T 11.1 liters (11.7 US qts, 9.8 lmp. qts)
    M/T 9.8 liters (10.4 US qts, 8.6 lmp. qts)
    HINT:
    S TOYOTA vehicles are filled with TOYOTA SLLC at the
    A98989 factory. In order to avoid damage to the engine cooling
    system and other technical problems, only use TOYOTA
    SLLC or similar high quality ethylene glycol based non–
    silicate, non–amine, non–nitrite, non–borate coolant with
    long–life hybrid organic acid technology.
    S Press the inlet and outlet radiator hoses several times by
    hand, and then check the level of the coolant. If the cool-
    ant level is low, add coolant.
    S Contact your TOYOTA dealer for further details.
    NOTICE:
    Never use water as a substitute for engine coolant.
    (d) Press the inlet and outlet radiator hoses several times by
    hand, and then check the level of the coolant.
    If the coolant level drops below the B line, add TOYOTA SLLC
    to the B line.
    (e) Install the radiator reservoir cap.
    (f) Using a wrench, install the vent plug.
    Torque: 2.0 N⋅m (20 kgf⋅cm, 18 in.⋅lbf)
    (g) Bleed air from the cooling system.
    (1) Warm up the engine until the thermostat opens.
    While the thermostat is open, circulate the coolant
    for several minutes.
    (2) Maintain the engine speed at 2,000 to 2,500 rpm.
    (3) Press the inlet and outlet radiator hoses several
    times by hand to bleed air.
    CAUTION:
    When pressing the radiator hoses:
    S Wear protective gloves.
    S Be careful as the radiator hoses are hot.
    S Keep your hands away from the radiator fan.
    (4) Stop the engine and wait until the coolant cools
    down to ambient temperature.
    CAUTION:
    Do not remove the radiator reservoir cap while the engine
    and radiator are still hot. Pressurized, hot engine coolant
    and steam may be released and cause serious burns.

    HILUX REPAIR MANUAL (Argentina) (DR201E)


    COOLING – COOLANT (HILUX/1KD–FTV, 2KD–FTV (TASA MADE 16–5
    FOR ARGENTINA))

    (h) After the coolant cools down, check that the coolant level
    is at the F line.
    If the coolant level is below the F line, add TOYOTA SLLC to the
    F line.

    F Line

    G36768

    3. CHECK FOR ENGINE COOLANT LEAKS (See page 16–1)

    HILUX REPAIR MANUAL (Argentina) (DR201E)

    You might also like