Basic Calculus Q3 Module 1
Basic Calculus Q3 Module 1
BASIC CALCULUS
Quarter 3 – Module 1
The Limit of a Function
and Limit Laws
NegOr_Q3_Basic Calculus11_Module1_v2
NegOr_Q3_Basic Calculus11_Module1_v2
Basic Calculus – Grade 11
Alternative Delivery Mode
Quarter 3 – Module 1: The Limit of a Function and Limit Laws
Second Edition, 2021
Republic Act 8293, section 176 states that: No copyright shall subsist in any
work of the Government of the Philippines. However, prior approval of the government
agency or office wherein the work is created shall be necessary for exploitation of such
work for profit. Such agency or office may, among other things, impose as a condition
the payment of royalties.
Borrowed materials (i.e., songs, stories, poems, pictures, photos, brand names,
trademarks, etc.) included in this module are owned by their respective copyright
holders. Every effort has been exerted to locate and seek permission to use these
materials from their respective copyright owners. The publisher and authors do not
represent nor claim ownership over them.
NegOr_Q3_Basic Calculus11_Module1_v2
Introductory Message
This Self-Learning Module (SLM) is prepared so that you, our dear learners,
can continue your studies and learn while at home. Activities, questions, directions,
exercises, and discussions are carefully stated for you to understand each lesson.
Each SLM is composed of different parts. Each part shall guide you step-by-
step as you discover and understand the lesson prepared for you.
Pre-tests are provided to measure your prior knowledge on lessons in each
SLM. This will tell you if you need to proceed on completing this module or if you need
to ask your facilitator or your teacher’s assistance for better understanding of the
lesson. At the end of each module, you need to answer the post-test to self-check your
learning. Answer keys are provided for each activity and test. We trust that you will be
honest in using these.
In addition to the material in the main text, Notes to the Teacher are also
provided to our facilitators and parents for strategies and reminders on how they can
best help you on your home-based learning.
Please use this module with care. Do not put unnecessary marks on any part
of this SLM. Use a separate sheet of paper in answering the exercises and tests. And
read the instructions carefully before performing each task.
If you have any questions in using this SLM or any difficulty in answering the
tasks in this module, do not hesitate to consult your teacher or facilitator.
Thank you.
i NegOr_Q3_Basic Calculus11_Module1_v2
I
This module was designed to provide you with fun and meaningful opportunities for
guided and independent learning at your own pace and time. You will be enabled to process
the contents of the learning resource while being an active learner.
The module is intended for you to illustrate the limit of a function using table of values
and the graph of a function and the limit laws; distinguish between lim 𝑓(𝑥) 𝑎𝑛𝑑 𝑓 (𝑐 ); and
𝑥→𝑐
apply the limits laws in evaluating the limit of algebraic functions (polynomial, rational, and
radical)
PRE-ASSESSMENT
Multiple Choice. Read and analyze each item carefully and write the letter of the correct answer
on your activity sheets/notebook.
1. Given the table of values below. Which among the statements DOES NOT correctly
describe the values in the table?
x f(x) x f(x)
0.5 -3.5 1.5 -2.5
0.88 -3.12 1.17 -2.83
0.996 -3.004 1.003 -2.997
0.9999 -3.0001 1.0001 -2.9999
A. The table shows that as the value of x increases the value of f(x) also increases.
B. The table shows that as the value of x decreases the value of f(x) also decreases.
C. The table shows that as x approaches 1 from left or right, f(x) approaches -3.
D. The table shows that as the value of x decreases the value of f(x) increases.
1 NegOr_Q3_Basic Calculus11_Module1_v2
𝑥 3 −3𝑥 2 +𝑥−3
For items 2-4, refer to the given. Let 𝑓(𝑥 ) = 𝑥−3
.
2. Given the table of values below, what is the value of f(x) if x = 2.99999?
x f(x)
2.7 8.29
2.85 9.12250000000001
2.995 9.97002499999939
2.99999
2 NegOr_Q3_Basic Calculus11_Module1_v2
9. How is the Division Theorem written in symbols if it states that the limit of a quotient
of functions is equal to the quotient of the limits of the individual functions, provided
the denominator limit is not equal to 0?
𝑓(𝑥) lim 𝑓(𝑥) 𝐿
𝑥→𝑐
A. lim = = , provided M = 0.
𝑥→𝑐 𝑔(𝑐) lim 𝑔(𝑥)
𝑥→𝑐
𝑀
A. If n is a negative integer, the limit of the nth root of a function is just the nth root
of the limit of the function, provided the nth root of the limit is a real number. Thus, it
is important to keep in mind that if n is even, the limit of the function must be positive.
B. If n is a positive integer, the limit of the nth root of a function is just the nth root of
the limit of the function, provided the nth root of the limit is a real number. Thus, it is
important to keep in mind that if n is even, the limit of the function must be positive.
C. If n is a positive integer, the limit of the nth root of a function is just the limit of the
function, provided the nth root of the limit is a negative number.
D. If n is a even integer, the limit of the nth root of a function is just the nth root of the
limit of the function, provided the nth root of the limit is a real number. Thus, it is
important to keep in mind that if n is odd, the limit of the function must be negative.
3 NegOr_Q3_Basic Calculus11_Module1_v2
Lesson Illustration of Limit of a Function using the Table
1 of Values and Graph and Distinction between
lim 𝑓 (𝑥 ) and f(c)
𝑥→𝑐
’s In
PRIOR-KNOWLEDGE
Complete the table of values below given the functions
f(x) = 1 + 3x
x -3 -2 -1 0 1 2 3
f(x)
Now using the table above, sketch the graph of the two functions.
4 NegOr_Q3_Basic Calculus11_Module1_v2
From the graph of the two functions as shown at the left, how
g(x) = x2– 1 will you reflect on the following?
’s New
1. f(x) = 1 + 3x, 𝑎𝑡 𝑥 = 2
2. g(x) = x 2 − 1, 𝑎𝑡 𝑥 = 2
5 NegOr_Q3_Basic Calculus11_Module1_v2
is It
x f(x)
1 4
1.4 5.2
1.7 6.1
1.9 6.7
1.95 6.85
1.997 6.991
1.9999 6.9997
1.9999999 6.9999997
Now, consider approaching 2 from its right or through values greater than but close to 2.
x f(x)
3 10
2.5 8.5
2.2 7.6
2.1 7.3
2.03 7.09
2.009 7.027
2.0005 7.0015
2.0000001 7.0000003
Observe that as the values of x get closer and closer to 2, the values of f(x) get closer
and closer to 7. This behavior can be shown no matter what set of values, or what direction, is
taken in approaching 2. In symbols, it is written as
lim (1 + 3𝑥)= 7.
𝑥→2
6 NegOr_Q3_Basic Calculus11_Module1_v2
Consider again f(x) = 1+3x. Its graph is the straight line with slope 3 and intercepts
−1
(0,1) and ( 3 , 0). Look at the graph in the vicinity of x = 2. You can easily see the points (from
the table of values above (1,4), (1.4, 5.2), (1.7,6.1), and so on, approaching the level where
f(x) = 7. The same can be seen from the right . Hence, the graph clearly confirms that
lim (1 + 3𝑥)= 7.
𝑥→2
y
𝑦 = 1 + 3𝑥
(2, 7)
x f(x)
-1.5 3.25
-1.2 2.44
-1.01 2.0201
-1.0001 2.00020001
x f(x)
-0.5 1.25
-0.8 1.64
-0.99 1.9801
-0.9999 1.99980001
7 NegOr_Q3_Basic Calculus11_Module1_v2
The graph of f(x)= x 2 + 1, is given below:
It can be seen from the graph that as values of x approach to -1, the values of
f(x) approach 2.
Approaching 0 from the left and from the right, we get the following tables:
x |𝒙 | x |𝒙 |
-0.3 0.3 0.3 0.3
-0.01 0.01 0.01 0.01
-0.00009 0.00009 0.00009 0.00009
-0.00000001 0.00000001 0.00000001 0.00000001
Hence,
lim|𝑥 | = 0.
x→0
In this example, f(x) = |𝑥 |. The graph is presented below:
It can be seen from the graph that as values of x approach to 0, the values of f(x)
approach 0 also.
8 NegOr_Q3_Basic Calculus11_Module1_v2
𝑥 2 −5𝑥+4
Example 3. Investigate lim ( 𝑥−1
) by constructing tables of values. Here, c = 1 and
𝑥→1
𝑥 2 −5𝑥+4
f(x) = . Take note that 1 is not in the domain of f, but this is not a problem. In evaluating
𝑥−1
a limit, remember that we only need to go very close to 1, we will not go to 1 itself.
𝑥 2 −5𝑥+4 (𝑥−4)(𝑥−1)
Take note that f(x) = 𝑥−1
, then f(x) = 𝑥−1
. Thus, f(x) = x - 4, provided
x ≠ 1.Hence, the graph of f(x) is also the graph of y = x-1, excluding the point where x = 1.
9 NegOr_Q3_Basic Calculus11_Module1_v2
1.2. DISTINGUISHING BETWEEN 𝐥𝐢𝐦 𝒇(𝒙) AND 𝒇(𝒄)
𝒙→𝒄
Is lim 𝑓(𝑥) always equal to 𝑓(𝑐)? To answer this question, consider the table of values
𝑥→𝑐
of the function 𝑓(𝑥) below.
The table of values as x approaches to the left or to the right of 2 is presented below.
x f(x)
1 4
1.4 5.2
1.7 6.1
1.9 6.7
1.95 6.85
1.997 6.991
1.9999 6.9997
1.9999999 6.9999997
x f(x)
3 10
2.5 8.5
2.2 7.6
2.1 7.3
2.03 7.09
2.009 7.027
2.0005 7.0015
2.00000001 7.00000003
We can conclude that lim (1 + 3𝑥) = 7. While, 𝑓 (2) = 7. So, in this example,
𝑥→2
lim 𝑓 (𝑥 ) 𝑎𝑛𝑑 𝑓(2) are equal. Notice that the same holds for the following examples as
𝑥→2
discussed.
𝐥𝐢𝐦 𝒇(𝒙) f(c)
𝒙→𝒄
lim x 2 +1=2 f(-1)=2
x→−1
lim |𝑥 |=0 f(0)=0
𝑥→0
This, however, is not always the case. Let us consider the function.
|𝑥 | 𝑖𝑓 𝑥 ≠ 0
f(x) = {
2 𝑖𝑓 𝑥 ≠ 0
Does this in any way affect the existence of the limit? Not at all. This example shows
that 𝐥𝐢𝐦 𝒇(𝒙) and f(c) may be distinct.
𝒙→𝒄
10 NegOr_Q3_Basic Calculus11_Module1_v2
𝑥+1 𝑖𝑓 𝑥 < 4
Furthermore, consider the third example where f(x) = {
(𝑥 − 4)2 + 3 𝑖𝑓 𝑥 ≥ 4
We have,
lim 𝑓(𝑥) f(c)
𝑥→𝑐
lim 𝑓(𝑥) 𝐷𝑁𝐸 f(4)=2
𝑥→𝑐
Once again, we see, that 𝐥𝐢𝐦 𝒇(𝒙) and f(c) are not the same.
𝒙→𝒄
’s More
Activity
x f(x)
1.6
1.35
1.05
1.005
1.0005
1.00005
11 NegOr_Q3_Basic Calculus11_Module1_v2
Lesson Illustration of Limit Laws and their
2 Applications in Evaluating the Limit of
Functions
’s In
PRIOR-KNOWLEDGE
Lesson 1 showed us how limits can be determined through either a table of values or
the graph of a function. One might ask: Must one always construct a table or graph the function
to determine the limit? Filling in a table of values sometimes requires very tedious calculations.
Likewise, a graph may be difficult to sketch. However, these should not be reasons for a student
to fail to determine a limit.
In this lesson, we will learn how to compute the limit of a function using Limit
Theorems.
’s New
12 NegOr_Q3_Basic Calculus11_Module1_v2
is It
LIMIT OF A CONSTANT
lim 𝑥 = 𝑐
𝑥→𝑐
For the remaining theorems, we will assume that the limits of f and g both exist as x
approaches c and that they are L and M, respectively. In other words,
iii. The Constant Multiple Theorem: This says that the limit of a multiple of a
function is simply that multiple of the limit of the function.
13 NegOr_Q3_Basic Calculus11_Module1_v2
iv. The Addition Theorem: This says that the limit of a sum of functions is the sum
of the limits of the individual functions. Subtraction is also included in this law,
that is, the limit of a difference of functions is the difference of their limits. In
symbols,
lim (𝑓(𝑥) + 𝑔(𝑥)) = lim 𝑓(𝑥) + lim 𝑔(𝑥) = 𝐿 + 𝑀.
𝑥→𝑐 𝑥→𝑐 𝑥→𝑐
For example, let lim 𝑓(𝑥)=4 and lim 𝑔(𝑥 ) = −5. Then
𝑥→𝑐 𝑥→𝑐
lim(𝑓(𝑥) ∙ 𝑔(𝑥)) = lim 𝑓(𝑥) ∙ lim 𝑔(𝑥 ) = 4 ∙ (−5) = −20.
𝑥→𝑐 𝑥→𝑐 𝑥→𝑐
v.a. Remark 1: The Addition and Multiplication Theorems may be applied to sums,
differences and products of more than functions.
Remark 2: The Constant Multiple Theorem is a special case of the Multiplication
Theorem. Indeed, in the Multiplication Theorem, if the first function f(x) is
replaced by a constant k, the result is the Constant Multiple Theorem.
14 NegOr_Q3_Basic Calculus11_Module1_v2
vi. The Division Theorem: This says that the limit of a quotient of functions is equal
to the quotient of the limits of the individual functions, provided the denominator
limit is not equal to 0. In symbols,
𝑓(𝑥) lim 𝑓(𝑥) 𝐿
𝑥→𝑐
lim 𝑔(𝑐) = = 𝑀, provided M ≠ 0.
𝑥→𝑐 lim 𝑔(𝑥)
𝑥→𝑐
For example,
a. If lim 𝑓(𝑥 ) = 4 and lim 𝑔(𝑥 ) = −5
𝑥→𝑐 𝑥→𝑐
𝑓(𝑥) lim 𝑓(𝑥) 4
𝑥→𝑐
lim 𝑔(𝑐) = = = − 5.
𝑥→𝑐 lim 𝑔(𝑥)
𝑥→𝑐
vii. The Power Limit. This theorem states that the limit of an integer power p of a
function is just that power of the limit of a function. In symbols,
viii. The Radical/ Root Theorem. This theorem states that if n is a positive integer, the
limit of the nth root of a function is just the nth root of the limit of the function,
provided the nth root of the limit is a real number. Thus, it is important to keep
in mind that if n is even, the limit of the function must be positive. In symbols,
𝑛
lim 𝑛√𝑓(𝑥)= 𝑛√lim 𝑓 (𝑥 )= √𝐿.
𝑥→𝑐 𝑥→𝑐
For example,
a. If lim 𝑓(𝑥)=4, then lim 𝑛√𝑓(𝑥)= 𝑛√lim 𝑓 (𝑥 ) = 2.
𝑥→𝑐 𝑥→𝑐 𝑥→𝑐
15 NegOr_Q3_Basic Calculus11_Module1_v2
2.2 APPLICATION OF LIMIT LAWS IN EVALUATING THE LIMIT OF
ALGEBRAIC FUNCTIONS
Recall the limit theorems. These theorems will be used in evaluating algebraic functions
and illustrated in the following examples.
Limits of Polynomial Functions
We start with evaluating of polynomial functions.
Example 1. Determine lim (2𝑥 + 1)
𝑥→1
Solution: From the theorems above,
lim (2𝑥 + 1) = lim 2𝑥 + lim 1 (Addition)
𝑥→1 𝑥→1 𝑥→1
= (2lim 𝑥) + 1 (Constant Multiple)
𝑥→1
= 2(1) + 1 (lim 𝑥 = 𝑐)
𝑥→𝑐
=2+1
= 3.
Example 2. Determine lim (2𝑥 3 − 4𝑥 2 + 1)
𝑥→−1
Solution: From the theorems above,
lim (2𝑥 3 − 4𝑥 2 + 1) = lim 2𝑥 3 − lim 4𝑥 2 + lim 1 (Addition)
𝑥→−1 𝑥→−1 𝑥→−1 𝑥→−1
= 2lim 𝑥 3 − 4 lim 𝑥 2 (Constant Multiple)
𝑥→−1 𝑥→−1
=2(−1)3 – 4(−1) + 1 2
(Power)
= -2-4+1
= -5.
4
Example 3. Evaluate lim (3𝑥 − 2𝑥 − 1).
𝑥→0
Solution. From the theorems above,
lim (3𝑥 4 − 2𝑥 − 1) =lim 3𝑥 4 - lim(2𝑥-lim 1 (Addition)
𝑥→0 𝑥→0 𝑥→0 𝑥→0
=3 lim 𝑥 4 - 2lim(𝑥-1 (Constant Multiple)
𝑥→0 𝑥→0
4
= 3(0) -2(0) – 1 (Power)
= 0 – 0 -1
= -1
Limits of Rational Functions
We will now apply the limit theorems in evaluating rational functions. In evaluating the
limits of such functions, recall from Theorem 1 the Division Rule, and all the rules stated in
Theorem 1 which have been useful in evaluating limits of polynomial functions, such as the
Additional and Product Rules.
1
Example 4. Evaluate lim𝑥→1 𝑥.
Solution: First, note that lim 𝑥 = 1. Since the limit of the denominator is nonzero, we can
𝑥→1
apply the Division Rule. Thus,
1 lim 1
lim 𝑥 = 𝑥→1 (Division)
𝑥→1 lim 𝑥
𝑥→1
1
=1
= 1.
16 NegOr_Q3_Basic Calculus11_Module1_v2
𝑥
Example 5. Evaluate lim
𝑥→2 𝑥+1
Solution: Start checking the limit of the polynomial function in the denominator.
lim (𝑥 − 1) = lim 𝑥 − lim 1
𝑥→2 𝑥→2 𝑥→2
=2-1
=1
Since the limit of the denominator is not zero, it follows that
𝑥 lim 𝑥
lim 𝑥 − 1 = lim𝑥→2
( 𝑥 − 1)
𝑥→2 𝑥→2
2
=1 (Division)
=2
(𝑥−3)(𝑥 2−2)
Example 6. Evaluate lim . First, note that
𝑥→1 𝑥 2 +1
lim (𝑥 2 + 1) = lim 𝑥 2 +lim 1
𝑥→1 𝑥→1 𝑥→1
=1 + 1
= 2 ≠ 0.
lim √𝑥 + 4 =√lim (𝑥 + 4)
𝑥→0 𝑥→0
=√4
=2
17 NegOr_Q3_Basic Calculus11_Module1_v2
3
Example 9. Evaluate lim √𝑥 2 + 3𝑥 − 6
𝑥→−2
Solution. Since the index of the radical sign in odd, we do not have to worry that the limit of
the radicand is negative. Therefore, the radical/root rule implies that
3
lim √𝑥 2 + 3𝑥 − 6 = 3√ lim (𝑥 2 + 3𝑥 − 6)
𝑥→−2 𝑥→−2
3
= √4 − 6 − 6
3
= √−8
= -2
’s More
Activity.
Use the limit theorems to evaluate the following, if the limit exist.
1. lim 𝑥
𝑥→12
2. lim 5
𝑥→2
3. lim (4𝑥 + 2)
𝑥→−3
4. lim 2𝑥 − 4
𝑥→3
5. lim (8 − 3𝑥 + 12𝑥 2 )
𝑥→2
2𝑥 2 −3𝑥+1
6. lim
𝑥→2 𝑥 3 +4
I Have Learned
Generalization
Directions: Reflect the learning that you gained after taking up the two lessons in this
module by completing the given statements below. Do this on your activity notebook. Do not
write anything on this module.
What were your thoughts or ideas about the topic before taking up the lesson?
I thought that _____________________________________________________________
__________________________________________________________________________.
What new or additional ideas have you had after taking up this lesson?
I learned that (write as many as you can)
___________________________________________________________________________
_______________________________________________________________________.
How are you going to apply your learning from this lesson?
I will apply
___________________________________________________________________________
_______________________________________________________________________.
18 NegOr_Q3_Basic Calculus11_Module1_v2
I Can Do
19 NegOr_Q3_Basic Calculus11_Module1_v2
Multiple Choice. Read and understand each statement. Write the letter of the correct answer
on your activity sheet/notebook.
1. Which defintion below illustrates the Constant Multiple Theorem which defines the limit of
a multiple of a function is simply that multiple of the limit of the function?
𝑃 𝑃
A. lim(𝑓 (𝑥 )) = lim(𝑓(𝑥 )) = 𝐿𝑃 .
𝑥→𝑐 𝑥→𝑐
B. lim 𝑓(𝑥 ) = 𝐿
𝑥→𝑐
C. lim(𝑓(𝑥) ∙ 𝑔(𝑥)) = lim 𝑓 (𝑥 ) ∙ lim 𝑔(𝑥 ) = 𝐿 ∙ 𝑀.
𝑥→𝑐 𝑥→𝑐 𝑥→𝑐
D. lim 𝑘 ∙ 𝑓 (𝑥 ) = 𝑘 ∙ lim 𝑓 (𝑥 ) = 𝑘 ∙ 𝐿.
𝑥→𝑐 𝑥→𝑐
2.
3.
𝑥 2 −5𝑥+4
5. What is the limit of as x approaches 1 from left.
𝑥−1
A. 3 B. 1 C. -1 D. -3
𝑥 2 −5𝑥+4
6. What is the limit as x approaches 1 from right.
𝑥−1
A. 3 B. 1 C. -1 D. -3
20 NegOr_Q3_Basic Calculus11_Module1_v2
7. Given the table of values below. What does this show base on their limit values?
x f(x) x f(x)
0.5 -3.5 1.5 -2.5
0.88 -3.12 1.17 -2.83
0.996 -3.004 1.003 -2.997
0.9999 -3.0001 1.0001 -2.9999
A. The table shows that as the value of x increases the value of f(x), decreases.
B. The table shows that as the value of x decreases the value of f(x), increases.
C. The table shows that as x approached 1 from left or right, f(x) approaches -3.
D. The table shows that as the value of x decreases the value of f(x) increases.
8. This symbol, lim 𝑓(𝑥) = 𝐿 is read as
𝑥→𝑐
A. The limit of x to c as it approaches to f(x) is L.
B. The limit of f(x) as x approaches to c is L.
C. The limit of L as x approaches to c is f(x).
D. The limit of L as f(x) approaches to c is x.
9𝑥 2 −1
9. Evaluate lim1 =
𝑥→ 3𝑥−1
3
A. ∞ B. -∞ C. 2 D. 0
𝑥 3 −8
10. Evaluate lim 𝑥2 −4 =
𝑥→0
A. 4 B. 2 C. 1 D. 0
11.
12. The Power Limit states that
A. the limit of an integer power p of a function is just that power of the limit of a
function.
B. the limit of an integer power p of a function is just the limit of the power of a function.
C. the limit of an integer power p of a function is just that power raised to another power
of the limit of a function.
D. the limit of a function power p of an integer is just that power of the limit of a
function.
13. Which among the following shows the limit of a constant given the symbol?
A. lim 12 = 12 C. lim 𝑐 = 64
𝑥→12 𝑥→64
B. lim −3.14 = 𝑐 D. lim 7 = 7
𝑥→𝑐 𝑥→𝑐
14. The limit of x as x approaches to c is equal to c. This may be thought of as the substitution
law because x is simply substituted by c. lim 𝑥 = 𝑐 as illustrated in the example below.
𝑥→𝑐
A. lim 𝑥 = 5 C. lim −10 = −10
𝑥→5 𝑥→−10
B. lim 0.005 = 𝑥 D. lim 𝑥 = 0
𝑥→0.005 5→𝑥
9𝑥 2 −1
15. Evaluate lim1( 3𝑥−1 ).
𝑥→
3
A. ∞ B. -∞ C. 2 D. 0
21 NegOr_Q3_Basic Calculus11_Module1_v2
22 NegOr_Q3_Basic Calculus11_Module1_v2
NegOr_Q3_Basic Calculus11_Module1_v2 23
PRE-
ASSESSMENT
Lesson 1.
1. D Lesson 2. 1. D
What’s More
2. B What’s 2. C
Activity. More
3. A 3. D
x f(x) Activity.
4. A 0.5 3.25 4. D
0.7 3.09 1. 12
5. C 5. D
0.95 3.0025 2. 5
6. D 0.995 3.000025 6. D
0.9995 3.00000025 3. -10
7. C 0.99995 3.0000000025 7. C
4. 2
8. C 8. A
x f(x) 5. 50
9. D 9. C
1.6 3.36 1
1.35 3.1225 6.
10. B 4 10. B
1.05 3.0025
1.005 3.000025 11. B
1.0005 3.00000025
1.00005 3.0000000025 12. D
13. C
14. A
15. B
References
Arceo, Carlene P., Lemence, Richard S. 2016. Basic Calculus Teaching Guide for Senior High School.
Quezon City: Department of Education - Bureau of Learning Resources (DepEd-BLR).
24 NegOr_Q3_Basic Calculus11_Module1_v2
For inquiries or feedback, please write or call: