Republic of the Philippines

Department of Education
Region IV – A CALABARZON
City Schools Division of Tanauan
TINURIK NATIONAL HIGH SCHOOL
Tinurik, Tanauan City, Batangas

FIRST QUARTERLY ASSESSMENT

Grade 9 ELECTRICAL INSTALLATION AND MAINTENANCE
NAME: ___________________________ SCORE: ____________________
SECTION: ________________________ TEACHER: __________________

MULTIPLE CHOICE
I. Read and understand the statement carefully, choose the letter of the best answer.
Write it on a sheet of paper.
1. When someone is electrocuted what is the best first
response?
A. Call 911
B. Pull the man who electrocuted
C. Switch off the safety switch
D. Push the man who electrocuted with your bare hands
2. Gerlie wants to protect her eye while working with
grinder what PPE is the best to use to protect her eyes?
A. Reading eye glasses C. Safety goggles
B. Oakley eye glass D. Colorful eye glasses
3. To protect the hearing of a person from the noise of
grinder what he must wear?
A. Dr. J headset C. Cotton plugs
B. Smartphone headset D. Safety Earplugs
4. Jack is assigned to turn off all the electric fans after
class what is the best thing to do in his task?
A. Turn the switch of the fan in off position
B. Turn off the switch and unplug it
C. Unplug the electric fan
D. None of the above
5. If you are dealing with electric fire what kind of fire
extinguisher you should use?
A. Class a B. Class b C. Class c D. Class d
6. Which of the following laboratory safety signs means
harmful?

A. B. C. D.
7. The following are the examples of shop safety rules
EXCEPT one.
A. Don’t clown around and engage in horseplay
B. Report all injuries at once
C. Leave the machine while running down
D. Keep the floor around your working area clean and free from litter
8. PPE stands for _________.
A. Professional Protective Equipment C. Professional Protection Equipment
B. Personal Protective Equipment D. Personal Protection Equipment
9. Which of the following PPE will used to protect your bare
hands in performing electrical works?
A. Safety gloves C. Safety suits
 B. Safety mask D. Safety helmet
10-12. Interpretation of diagram. Choose the letter that described each diagram.

A. Pictorial Diagram
B. Schematic Diagram
C. One line Diagram
10.
D. Series Diagram
A. Pictorial Diagram
B. Parallel Diagram
C. Schematic Diagram
11.
D. One line Diagram

A. Schematic Diagram
B. Series-Parallel Diagram
C. One line Diagram
12.
D. Pictorial Diagram
13. What symbol represented the resistor?

A. B. C. D.
14. It indicates that a person should observe extra awareness.
A. Prohibition B. Caution C. Safety alert D. Danger
15.It specifies a potentially hazardous situation which, if not avoided, could result in serious
injury or even death.
A. Warning B. Prohibition C. Danger D. Safety alert
16.What do you call to small drawings or pictograms used to represent various electrical
devices in a diagram or plan of an electrical circuit?
A. Electrical plan C. Electrical signs
B. Electrical circuit D. Electrical symbols
17.Lisa touches the body of their oven toaster and she got shock. What is the problem of
their oven toaster?
A. Grounded B. Open Circuit C. Closed Circuit D. Shorted
18.It is a circuit in which lamps are arranged in a chain, so that the current has only one
path to take.
A. Parallel Circuit C. Series Parallel Circuit
B. Series Circuit D. Simple Circuit
19.If the voltage is constant or the same in each component. What kind of circuit is this?
A. Parallel Circuit C. Complex Circuit
B. Series Circuit D. Simple Circuit
20.What will happen if L1 and L2 is in contact without passing any load?
A. It will cause an explosion C. The line will spark only
B. Nothing happens D. It will produce more voltage
21.Mark switch on the switch in his room to turn on the light but the light does not light up.
What do you think happen?
A. The circuit is grounded C. The circuit is close
B. The circuit is open D. The circuit is overloaded
22.It is a circuit in which lamp are connected across the wires. The voltage across each load
is the same.
A. Parallel circuit C. Short circuit
B. Series circuit D. Series-parallel circuit
 Republic of the Philippines

Department of Education
Region IV – A CALABARZON
23-27. Analogy. Choose the correct word to complete the analogy. Write only the letter.
23.Hammer : Mallet :: Screw driver : _________
A. Allen B. Hack saw C. Conduits D. Claw
24. Blow torch : Fire :: Heat gun : _________
A. Water B. Air C. Wood D. Metal
25. Steel tape rule : Length :: _________ : Voltage
A. Tape measure B. Caliper C. Test light D. Multi-tester
26. Files : Tools :: _________ : Supplies
A. Clamps B. Hammer C. Screw driver D. Pliers
27.Hand tool : Combination pliers :: Power tool : _________
A. Claw hammer C. Philips screw driver
B. Pipe Threader D. Fuse puller
28.Johnny wants to bend a plastic pipe in 90degree. What is the best power tool to use?
A. Electric stove B. Heat gun C. Lighter D. Gas stove
City Schools Division of Tanauan
TINURIK NATIONAL HIGH SCHOOL
Tinurik, Tanauan City, Batangas

29.This is a metal box where all circuit breaker place.

A. Junction box B. Square box C. Utility box D. Panel board
30.An electrical material used as the passage of wires for protection and insulation?
A. Connectors B. Clamps C. Conduits D. Male plug
31-35. Investigate the Electrical Plan. Then answer the questions below.

31.How many duplex convenience outlets are there inside the bedroom 3?
A. 1 B. 2 C. 4 D. 5
32.What type of lamp can you see in the kitchen?
A. Incandescent lamp C. Fluorescent lamp
B. Chandelier D. LED lamp
33.This part of the plan having 8 duplex convenience outlet, 1 incandescent lamp and 3 pole
switches.
A. Garage B. Bedroom C. Living room D. Dining room
34.How many lamps are there in all including different types of lamps?
 A. 10 B. 11 C. 12 D. 13
35.Aside from electricians, electrical plans are basically used by whom?
A. Engineer B. Cashier C. Teacher D. Doctor
36.An instrument used to measure the amount of electrical current intensity in a circuit.
A. Voltmeter B. Ammeter C. Micrometer D. Ohmmeter
37.A pocket-sized tool used to test the line wire or circuit if there is current in it is called ___.
A. Test light B. Wire gauge C. Ruler D. Pull-push rule
38.A measuring tool used to measure the length of an object in centimeter and inches.
A. Test light B. Wire gauge C. Ruler D. Pull-push rule
39.It is used to measure the diameter of wires/conductors in circular mils. It can measure
small and big sizes of wires and cables.
A. Voltmeter B. Ammeter C. Micrometer D. Ohmmeter
40.It is used to measure the voltage, resistance and current of a circuit. It is connected in
parallel or series with the circuit depending on what to measure.
A. Volt-Ohm-Milliammeter C. Ohmmeter
B. Micrometer D. Ammeter
 Republic of the Philippines

Department of Education
Region IV – A CALABARZON

City Schools Division of Tanauan

TINURIK NATIONAL HIGH SCHOOL
Tinurik, Tanauan City, Batangas

41.It is a measuring tool used to measure length, width and thickness of short flat object
and in sketching straight lines.
A. Test light B. Wire gauge C. Ruler D. Pull-push rule
42.It is also called tong-tester. It is used to measure current flowing in a conductor. It is
clamped or hanged in a conductor.
A. Ohmmeter B. Ammeter C. Clamp ammeter D. Voltmeter
43.An instrument used to measure electrical pressure or voltage of a circuit. The unit of
measure is volt (v). This is connected across or parallel to the circuit.
A. Voltmeter B. Ammeter C. Clamp ammeter D. Ohmmeter
44.It is used in determining the size of wires/conductors.
A. Ruler C. Pull-push rule
B. Test lights D. American Wire Gauge
45.A device used to measure the voltage, resistance and current of a circuit. It is connected
in parallel or series with the circuit depending on what to measure.
A. Ammeter B. Voltmeter C. Ohmmeter D. Multi-tester
46.To measure the current of a circuit. What will you do? A. Connect the test probe in
parallel to the circuit
B. Connect the test probe in series to the circuit.
C. Both A and B are correct
D. None of the above
47.What is number 1 rule in measuring voltage?
A. Place the knob selector range to the lowest range of the voltage.
B. Place the knob selector range to the highest range of the voltage.
C. Place the knob selector range to exact value of the voltage.
D. None of the above 48. Multi-tester is used to?
A. Measure Voltage C. Measure Resistance
B. Measure Current D. All of the above
49.It is a needle like inside the meter/scale of a multi-tester and it also indicate
the measurement. A. Zero ohm adjusting knob
B. Pointer
C. Adjustment screw
D. Test probe
50.It is used to select different functions and range of the meter.
A. Zero ohm adjusting knob
B. Range selector knob
C. Adjustment screw
D. Test probe
 Republic of the Philippines

Department of Education
Region IV – A CALABARZON

City Schools Division of Tanauan

TINURIK NATIONAL HIGH SCHOOL
Tinurik, Tanauan City, Batangas

KEY TO CORRECTION

1. C 26. A
2. C 27. B
3. D 28. B
4. B 29. D
5. C 30. C
6. A 31. C
7. C 32. C
8. B 33. C
9. A 34. C
10.A 35. A
11.C 36. B
12.C 37. A
13.A 38. D
14.C 39. C
15.C 40. A
16.D 41. C
17.A 42. C
18.B 43. A
19.A 44. D
20.A 45. D
21.B 46. C
22.A 47. B
23.A 48. D
24.B 49. B
25.D 50. B
 Republic of the Philippines

Department of Education
Region IV – A CALABARZON