S10K™ VACUUM GAS FEEDER Benefits:

• Proven design, excellent reliability

WALLACE & TIERNAN® GAS FEED SYSTEMS
and long service life
The S10k™ chlorinator is a vacuum operated, sonically regulated unit. Direct • Proven V-notch flow control
cylinder mounting puts the vacuum control valve right at the source, reducing technology providing reliable
gas pressure to a vacuum immediately. Its ability to handle all water treatment vacuum operation and
gases as well as its flexible mounting configurations for cylinders, manifolds or precise feeding
ton containers provides versatility for all installations. Two basic arrangements • Easy to read icons provide positive
are available in capacities of 4 and 10 kilograms per hour/200 and 500 pounds indication of container status
per day (PPD) of chlorine gas. With fewer internal parts, you can be confident • Positive shutoff allows
that the S10k chlorinator will provide reliable, dependable service. containers to be changed
Typical applications without admitting air, dirt or
• Treatment of potable water, industrial process and waste water moisture into control unit
• Desinfection of swimming pool water • Easy alignment of the control unit
on the container by means of a
Features
captive yoke assembly
• Integral change-over unit for several gas cylinders (option)
• Complete gas consumption by
• Volt-free contact for container empty signal (option)
means of a non-isolating switch-
• Available for feeding chlorine gas, carbon dioxide, sulphur dioxide and
over system
ammonia (for other gases consult)
• Flowmeters with high resolution
Vacuum control valve in 14 measuring ranges up to
The vacuum control valve reduces the supply pressure to the necessary 10 kg/h
operating vacuum. It includes a selector knob and icons to indicate the operating • Serviceability – components
status. An off-position isolates the diaphragm and internal components from easily accessible
atmospheric air when the containers are changed. In addition, the vacuum
control valve incorporates an internal pressure relief valve.
The automatic change-over system is designed to change over to a new supply
as the on-line supply is depleted. The control valve includes a mechanical detent
to keep the stand-by gas supply ready for on-line service. When the switch-
over has been accomplished, gas continues to be withdrawn from the former
source until it is empty. The vacuum control valve incorporates an easy to read
indication for “stand-by”, “operating”, “empty” and “off”.
DOSING RANGES
Chlorine / Sulphur dioxide Carbon dioxide Ammonia
g/h lb/24 h kg/h lb/24 h g/h lb/24 h kg/h lb/24 h g/h lb/24 h kg/h lb/24 h

2 – 251 0.1 - 1 0.1 – 2 5 - 100 1 – 201 -1 0.12 – 2.4 5 - 100 0.6 - 121 -5 0.075 - 1.5 3.8 - 80

3 – 60; 0.2 - 3 0.15 – 3 8 - 160 2.4 – 48 0.1 - 2 0.16 – 3.2 8 - 160 1.5 - 30 0.1 - 1.5 0.1 - 2 5 - 100

10 – 200 0.5 - 10 0.2 – 4 10 - 210 8– 160 0.5 - 8 0.2 – 4 2

10 - 210 5 - 100 0.3 - 5 0.125 - 2.5 2
5 - 130

20 – 400 1 - 20 0.25 – 52 13 - 265 16 – 320 0.8 - 17 0.24 – 4.82 12 - 254 10 - 200 0.5 - 10 0.15 -32 7 - 160

30 – 600 2 - 30 0.3 – 62 16- 310 24 – 480 1.2 - 25 0.32 – 6.42 17 - 338 15 - 300 1.5 - 15 0.2 -22 10 - 100
20 -
50 – 1000 3 - 50 0.4 – 82 20 - 420 40 – 800 2 - 42 0.4 – 82 25 - 500 1.5 - 25 0.25 -52 13 - 260
420
75 – 1500 4 - 80 0.5 – 102 26 - 530 60 – 1200 3 - 63 37 - 740 2 - 38

80 – 1600 4 - 85 50 - 10002 3 - 50

1
AVAILABLE WITH 3 ” FLOWMETER ONLY; 2AVAILABLE WITH 5 ” FLOWMETER ONLY

Gas control unit Indication of operating status:

The gas control unit consisting of a 3 ” or a 5 ” Three/four4 icons provide visual indication of operating
flowmeter with V-notch control orifice, can be installed status of the gas supply.
up to 3000 meters from the vacuum regulating valve 4
Only with the use of a vacuum regulator with automatic switch-over.

(gas supply). For the connection of the gas control Complete shut-off:
unit to several points of application acording devices The OFF position of the selector knob allows for the shut-
and connectors are available. The flowmeter is freely off of the vacuum regulator. The containers can be changed
accessible and can be easily removed for maintenance. without admitting air, dirt or moisture into the control unit
Injector and without the need for shutting-off the injector.
Fixed-throat injectors develop the necessary vacuum for Automatic switch-over (option):
the operation of the S10k™ gas feed system by means The integral switch-over eliminates the need for external
of the operating water. An integral bracket is provided switching devices. The cylinder can be fully emptied, with
for horizontal as well as vertical mounting. The injectors the possibility to maintain a positive pressure in the empty
include two independent check valves to prevent water cylinder (option).
from back-flooding into the vacuum control valve when the
system is shut-off. Operating range: manual 1 : 20 for any feed range
Gas cylinder empty signal (option):
INJECTORS:
Connection 4 kg/h 10 kg/h Volt-free contact (max. 3 VA, 24 V DC)
Gas dosing unit PVC pipe Injector/operating water:
DN 20, DN 25 DN 25, DN 32 The injectors are available in two sizes: 3/4 ” up to 4
Solution outlet same as inlet PVC pipe kg/h and 1 ” up to 10 kg/h. Depending on the operating
DN 20, DN 25, DN 32
conditions (gas feed range, operating water pressure) the
injector throats are specified according to the application.
Vacuum control valve: Inlet pressure:
Tubing to gas dosing unit3: max. 16 bar up to 38 °C/max. 10 bar up to. 55 °C
PE-hose 1/4 ”, 3/8 ”, 1/2 ”; PVC-pipe DN 15, DN 20, DN 25
3
The nominal diameters of the connecting lines are a function of the gas feed rate and Back pressure:
the length of the line. max. 11 bar (depending on line specifications and
operating water temperature)
Cylinder or tank connection:
Direct connection to cylinder or header valve or to
flexible lines, manifolds
Auf der Weide 10, 89312 Günzburg, Germany

+49 (8221) 904-0 www.evoqua.com

S10k and Wallace & Tiernan are trademarks of Evoqua, its subsidiaries or affiliates, in some countries. All information presented
herein is believed reliable and in accordance with accepted engineering practices. Evoqua makes no warranties as to the
completeness of this information. Users are responsible for evaluating individual product suitability for specific applications.
Evoqua assumes no liability whatsoever for any special, indirect or consequential damages arising from the sale, resale or misuse
of its products.

© 2016 Evoqua Water Technologies GmbH Subject to change without notice WT.025.200.000.IE.PS.0116
Wallace & Tiernan® Products worldwide
Australia Canada China France Germany Singapore UK USA
+61 3 8720 6597 +1 905 944 2800 +86 10 57076305 +33 1 41 15 92 20 +49 8221 9040 +65 6830 7165 +44 1732 771777 +1 856 507 9000
info.au@evoqua.com canadainfo@evoqua.com sales.cn@evoqua.com wtfra@evoqua.com wtger@evoqua.com sales.sg@evoqua.com info.uk@evoqua.com wt.us @evoqua.com