Layers of OSI Model

OSI stands for Open Systems Interconnection. It has been developed by ISO – ‘International
Organization of Standardization, in the year 1984. It is a 7-layer architecture with each layer
having specific functionality to perform. All these 7 layers work collaboratively to transmit the
data from one person to another across the globe.
1. Physical Layer (Layer 1):

The lowest layer of the OSI reference model is the physical layer. It is responsible for the actual
physical connection between the devices. The physical layer contains information in the form
of bits. It is responsible for transmitting individual bits from one node to the next. When
receiving data, this layer will get the signal received and convert it into 0s and 1s and send them
to the Data Link layer, which will put the frame back together.

The functions of the physical layer are:

1. Bit synchronization: The physical layer provides the synchronization of the bits by
providing a clock. This clock controls both sender and receiver thus providing
synchronization at bit level.
2. Bit rate control: The Physical layer also defines the transmission rate i.e. the number of
bits sent per second.
3. Physical topologies: Physical layer specifies the way in which the different devices/nodes
are arranged in a network i.e., bus, star or mesh topology.
4. Transmission mode: Physical layer also defines the way in which the data flows between
the two connected devices. The various transmission modes possible are: Simplex, half-
duplex and full-duplex.
* Hub, Repeater, Modem, Cables are Physical Layer devices.
** Network Layer, Data Link Layer and Physical Layer are also known as Lower
Layers or Hardware Layers.

2. Data Link Layer (DLL) (Layer 2):

The data link layer is responsible for the node to node delivery of the message. The main
function of this layer is to make sure data transfer is error-free from one node to another,
over the physical layer. When a packet arrives in a network, it is the responsibility of DLL to
transmit it to the Host using its MAC address.

Data Link Layer is divided into two sub layers :

1. Logical Link Control (LLC)
2. Medium Access Control (MAC)
The packet received from Network layer is further divided into frames depending on the frame
size of NIC (Network Interface Card). DLL also encapsulates Sender and Receiver’s MAC address
in the header.
The Receiver’s MAC address is obtained by placing an ARP(Address Resolution Protocol) request
onto the wire asking “Who has that IP address?” and the destination host will reply with its
MAC address.

The functions of the data Link layer are :

1. Framing: Framing is a function of the data link layer. It provides a way for a sender to
transmit a set of bits that are meaningful to the receiver. This can be accomplished by
attaching special bit patterns to the beginning and end of the frame.
2. Physical addressing: After creating frames, Data link layer adds physical addresses (MAC
address) of sender and/or receiver in the header of each frame.
3. Error control: Data link layer provides the mechanism of error control in which it detects
and retransmits damaged or lost frames.
4. Flow Control: The data rate must be constant on both sides else the data may get
corrupted thus, flow control coordinates that amount of data that can be sent before
receiving acknowledgement.
5. Access control: When a single communication channel is shared by multiple devices, MAC
sub-layer of data link layer helps to determine which device has control over the channel
at a given time.

* Packet in Data Link layer is referred as Frame.

** Data Link layer is handled by the NIC (Network Interface Card) and device drivers of host
machines.
*** Switch & Bridge are Data Link Layer devices.

3. Network Layer (Layer 3):

Network layer works for the transmission of data from one host to the other located in
different networks. It also takes care of packet routing i.e. selection of the shortest path to
transmit the packet, from the number of routes available. The sender & receiver’s IP address
are placed in the header by the network layer.
The functions of the Network layer are:
1. Routing: The network layer protocols determine which route is suitable from source to
destination. This function of network layer is known as routing.
2. Logical Addressing: In order to identify each device on internetwork uniquely, network
layer defines an addressing scheme. The sender & receiver’s IP address are placed in the
header by network layer. Such an address distinguishes each device uniquely and
universally.

* Segment in Network layer is referred as Packet.

** Network layer is implemented by networking devices such as routers.

4. Transport Layer (Layer 4) :

Transport layer provides services to application layer and takes services from network layer.
The data in the transport layer is referred to as Segments. It is responsible for the End to End
Delivery of the complete message. The transport layer also provides the acknowledgement of
the successful data transmission and re-transmits the data if an error is found.

• At sender’s side:

Transport layer receives the formatted data from the upper layers, performs Segmentation and
also implements Flow & Error control to ensure proper data transmission. It also adds Source
and Destination port number in its header and forwards the segmented data to the Network
Layer.
Note: The sender need to know the port number associated with the receiver’s application.
Generally, this destination port number is configured, either by default or manually. For
example, when a web application makes a request to a web server, it typically uses port
number 80, because this is the default port assigned to web applications. Many applications
have default port assigned.

• At receiver’s side:
Transport Layer reads the port number from its header and forwards the Data which it has
received to the respective application. It also performs sequencing and reassembling of the
segmented data.
The functions of the transport layer are:
1. Segmentation and Reassembly: This layer accepts the message from the (session) layer,
breaks the message into smaller units. Each of the segment produced has a header
associated with it. The transport layer at the destination station reassembles the message.
2. Service Point Addressing: In order to deliver the message to correct process, transport
layer header includes a type of address called service point address or port address. Thus
by specifying this address, transport layer makes sure that the message is delivered to the
correct process.

The services provided by the transport layer:

1. Connection Oriented Service: It is a three-phase process which include
– Connection Establishment
– Data Transfer
– Termination / disconnection
In this type of transmission, the receiving device sends an acknowledgement, back to the
source after a packet or group of packet is received. This type of transmission is reliable
and secure.
2. Connection less service: It is a one-phase process and includes Data Transfer. In this type
of transmission, the receiver does not acknowledge receipt of a packet. This approach
allows for much faster communication between devices. Connection-oriented service is
more reliable than connectionless Service.

* Data in the Transport Layer is called as Segments.

** Transport layer is operated by the Operating System. It is a part of the OS and communicates
with the Application Layer by making system calls.
Transport Layer is called as Heart of OSI model.

5. Session Layer (Layer 5):

This layer is responsible for establishment of connection, maintenance of sessions,

authentication and also ensures security.

The functions of the session layer are:

1. Session establishment, maintenance and termination: The layer allows the two
processes to establish, use and terminate a connection.
 2. Synchronization: This layer allows a process to add checkpoints which are considered as
synchronization points into the data. These synchronization point help to identify the
error so that the data is re-synchronized properly, and ends of the messages are not cut
prematurely and data loss is avoided.
3. Dialog Controller: The session layer allows two systems to start communication with each
other in half-duplex or full-duplex.

**All the below 3 layers(including Session Layer) are integrated as a single layer in the TCP/IP
model as “Application Layer”.
**Implementation of these 3 layers is done by the network application itself. These are also
known as Upper Layers or Software Layers.

SCENARIO:
Let’s consider a scenario where a user wants to send a message through some Messenger
application running in his browser. The “Messenger” here acts as the application layer which
provides the user with an interface to create the data. This message or so-called Data is
compressed, encrypted (if any secure data) and converted into bits (0’s and 1’s) so that it can
be transmitted.

6. Presentation Layer (Layer 6) :

Presentation layer is also called the Translation layer. The data from the application layer is
extracted here and manipulated as per the required format to transmit over the network.
The functions of the presentation layer are :

1. Translation: For example, ASCII to EBCDIC.

 2. Encryption/ Decryption: Data encryption translates the data into another form or code.
The encrypted data is known as the cipher text and the decrypted data is known as plain
text. A key value is used for encrypting as well as decrypting data.
3. Compression: Reduces the number of bits that need to be transmitted on the network.

7. Application Layer (Layer 7):

At the very top of the OSI Reference Model stack of layers, we find Application layer which is
implemented by the network applications. These applications produce the data, which has to
be transferred over the network. This layer also serves as a window for the application services
to access the network and for displaying the received information to the user.

Ex: Application – Browsers, Skype Messenger etc.

**Application Layer is also called as Desktop Layer.

The functions of the Application layer are :

1. Network Virtual Terminal
2. FTAM-File transfer access and management
3. Mail Services
4. Directory Services
OSI model acts as a reference model and is not implemented in the Internet because of its late
invention. Current model being used is the TCP/IP model.
TCP/IP Model
The OSI Model we just looked at is just a reference/logical model. It was designed to
describe the functions of the communication system by dividing the communication
procedure into smaller and simpler components. But when we talk about the TCP/IP
model, it was designed and developed by Department of Defense (DoD) in 1960s and is
based on standard protocols. It stands for Transmission Control Protocol/Internet
Protocol. The TCP/IP model is a concise version of the OSI model. It contains four
layers, unlike seven layers in the OSI model. The layers are:
1. Process/Application Layer
2. Host-to-Host/Transport Layer
3. Internet Layer
4. Network Access/Link Layer
The diagrammatic comparison of the TCP/IP and OSI model is as follows :

Difference between TCP/IP and OSI Model:

TCP/IP OSI

TCP refers to Transmission Control Protocol. OSI refers to Open Systems Interconnection.

TCP/IP has 4 layers. OSI has 7 layers.

TCP/IP is more reliable OSI is less reliable

TCP/IP does not have very strict boundaries. OSI has strict boundaries

TCP/IP follow a horizontal approach. OSI follows a vertical approach.

 TCP/IP uses both session and presentation OSI uses different session and presentation
layer in the application layer itself. layers.

TCP/IP developed protocols then model. OSI developed model then protocol.

Transport layer in TCP/IP does not provide In OSI model, transport layer provides
assurance delivery of packets. assurance delivery of packets.

Connection less and connection oriented

TCP/IP model network layer only provides both services are provided by network layer
connection less services. in OSI model.

While in OSI model, Protocols are better

Protocols cannot be replaced easily in TCP/IP covered and is easy to replace with the
model. change in technology.

The first layer is the Process layer on the behalf of the sender and Network Access
layer on the behalf of the receiver. During this article, we will be talking on the behalf of
the receiver.

1. Network Access Layer –

This layer corresponds to the combination of Data Link Layer and Physical Layer of the
OSI model. It looks out for hardware addressing and the protocols present in this layer
allows for the physical transmission of data.

We just talked about ARP being a protocol of Internet layer, but there is a conflict about
declaring it as a protocol of Internet Layer or Network access layer. It is described as
residing in layer 3, being encapsulated by layer 2 protocols.

2. Internet Layer –

This layer parallels the functions of OSI’s Network layer. It defines the protocols which
are responsible for logical transmission of data over the entire network. The main
protocols residing at this layer are :
1. IP – stands for Internet Protocol and it is responsible for delivering packets from
the source host to the destination host by looking at the IP addresses in the packet
headers. IP has 2 versions:

IPv4 and IPv6. IPv4 is the one that most of the websites are using currently. But
IPv6 is growing as the number of IPv4 addresses are limited in number when
compared to the number of users.
 2. ICMP – stands for Internet Control Message Protocol. It is encapsulated within IP
datagrams and is responsible for providing hosts with information about network
problems.
3. ARP – stands for Address Resolution Protocol. Its job is to find the hardware
address of a host from a known IP address. ARP has several types: Reverse ARP,
Proxy ARP, Gratuitous ARP and Inverse ARP.

3. Host-to-Host Layer –

This layer is analogous to the transport layer of the OSI model. It is responsible for end-
to-end communication and error-free delivery of data. It shields the upper-layer
applications from the complexities of data. The two main protocols present in this layer
are :
1. Transmission Control Protocol (TCP) – It is known to provide reliable and error-
free communication between end systems. It performs sequencing and
segmentation of data. It also has acknowledgment feature and controls the flow of
the data through flow control mechanism. It is a very effective protocol but has a lot
of overhead due to such features. Increased overhead leads to increased cost.
2. User Datagram Protocol (UDP) – On the other hand does not provide any such
features. It is the go-to protocol if your application does not require reliable
transport as it is very cost-effective. Unlike TCP, which is connection-oriented
protocol, UDP is connectionless.

Differences between TCP and UDP

TRANSMISSION CONTROL PROTOCOL (TCP) USER DATAGRAM PROTOCOL (UDP)

TCP is a connection-oriented protocol. UDP is the Datagram oriented protocol. This is

Connection-orientation means that the because there is no overhead for opening a
communicating devices should establish a connection, maintaining a connection, and
connection before transmitting data and terminating a connection. UDP is efficient for
should close the connection after transmitting broadcast and multicast type of network
the data. transmission.

TCP is reliable as it guarantees delivery of data The delivery of data to the destination cannot
to the destination router. be guaranteed in UDP.

TCP provides extensive error checking

mechanisms. It is because it provides flow UDP has only the basic error checking
control and acknowledgment of data. mechanism using checksums.

Sequencing of data is a feature of Transmission There is no sequencing of data in UDP. If

Control Protocol (TCP). this means that packets ordering is required, it has to be managed by
arrive in-order at the receiver. the application layer.
 TRANSMISSION CONTROL PROTOCOL (TCP) USER DATAGRAM PROTOCOL (UDP)

UDP is faster, simpler and more efficient than

TCP is comparatively slower than UDP. TCP.

Retransmission of lost packets is possible in There is no retransmission of lost packets in

TCP, but not in UDP. User Datagram Protocol (UDP).

TCP has a (20-80) bytes variable length header. UDP has a 8 bytes fixed length header.

TCP is heavy-weight. UDP is lightweight.

TCP doesn’t supports Broadcasting. UDP supports Broadcasting.

TCP is used by HTTP, HTTPs, FTP, SMTP and UDP is used by DNS, DHCP, TFTP, SNMP, RIP,
Telnet. and VoIP.

4. Application Layer –

This layer performs the functions of top three layers of the OSI model: Application,
Presentation and Session Layer. It is responsible for node-to-node communication and
controls user-interface specifications. Some of the protocols present in this layer are:
HTTP, HTTPS, FTP, TFTP, Telnet, SSH, SMTP, SNMP, NTP, DNS, DHCP, NFS, X
Window, LPD. Have a look at Protocols in Application Layer for some information about
these protocols. Protocols other than those present in the linked article are :
1. HTTP and HTTPS – HTTP stands for Hypertext transfer protocol. It is used by the
World Wide Web to manage communications between web browsers and servers.
HTTPS stands for HTTP-Secure. It is a combination of HTTP with SSL(Secure
Socket Layer). It is efficient in cases where the browser need to fill out forms, sign
in, authenticate and carry out bank transactions.
2. SSH – SSH stands for Secure Shell. It is a terminal emulations software similar to
Telnet. The reason SSH is more preferred is because of its ability to maintain the
encrypted connection. It sets up a secure session over a TCP/IP connection.
3. NTP – NTP stands for Network Time Protocol. It is used to synchronize the clocks
on our computer to one standard time source. It is very useful in situations like
bank transactions. Assume the following situation without the presence of NTP.
Suppose you carry out a transaction, where your computer reads the time at 2:30
PM while the server records it at 2:28 PM. The server can crash very badly if it’s
out of sync.