Osi Model

OSI MODEL
Open Systems Interconnections

What is OSI Model?
• The OSI model(Open Systems Interconnections), created in 1984 by

ISO, is a reference framework that explains the process of transmitting
data between computers. It is divided into seven layers that work
together to carry out specialized network functions, allowing for a
more systematic approach to networking.
Types Of OSI Layers
• The OSI model consists of seven abstraction layers arranged in a top-down

order:
1.Physical Layer
2.Data Link Layer
3.Network Layer
4.Transport Layer
5.Session Layer
6.Presentation Layer
7.Application Layer
1.Physical Layer
• The lowest layer of the OSI reference

model is the physical layer. It is responsible
for the actual physical connection between
the devices. The physical layer contains
information in the form of bits. It is
responsible for transmitting individual bits
from one node to the next. When receiving
data, this layer will get the signal received
and convert it into 0s and 1s and send
them to the Data Link layer, which will put
the frame back together.
Functions of the Physical Layer
• Bit synchronization: The physical layer provides the synchronization of

the bits by providing a clock. This clock controls both sender and receiver
thus providing synchronization at the bit level.
• Bit rate control: The Physical layer also defines the transmission rate i.e.
the number of bits sent per second.
• Physical topologies: Physical layer specifies how the different,
devices/nodes are arranged in a network i.e. bus, star, or mesh topology.
• Transmission mode: Physical layer also defines how the data flows
between the two connected devices. The various transmission modes
possible are Simplex, half-duplex and full-duplex.
2.Data Link Layer
• The data link layer is responsible for the node-

to-node delivery of the message. The main
function of this layer is to make sure data
transfer is error-free from one node to
another, over the physical layer. When a packet
arrives in a network, it is the responsibility of
the DLL to transmit it to the Host using its
MAC address.
Functions of the Data Link Layer
• Error control: The data link layer provides the mechanism of error
control in which it detects and retransmits damaged or lost frames.
• Flow Control: The data rate must be constant on both sides else the
data may get corrupted thus, flow control coordinates the amount of
data that can be sent before receiving an acknowledgment.
• Access control: When a single communication channel is shared by
multiple devices, the MAC sub-layer of the data link layer helps to
determine which device has control over the channel at a given time.
3.Network Layer
• The network layer works for the

transmission of data from one host to
the other located in different networks.
It also takes care of packet routing i.e.
selection of the shortest path to transmit
the packet, from the number of routes
available. The sender & receiver’s IP
addresses are placed in the header by
the network layer.
Functions of the Network Layer
• Routing: The network layer protocols determine which route is

suitable from source to destination. This function of the network layer
is known as routing.
• Logical Addressing: To identify each device on Internetwork
uniquely, the network layer defines an addressing scheme. The sender
& receiver’s IP addresses are placed in the header by the network
layer. Such an address distinguishes each device uniquely and
universally.
4.Transport Layer
• The transport layer provides services to

the application layer and takes services
from the network layer. The data in the
transport layer is referred to
as Segments. It is responsible for the
end-to-end delivery of the complete
message. The transport layer also
provides the acknowledgment of the
successful data transmission and re-
transmits the data if an error is found.
Functions of the Transport Layer
• Segmentation and Reassembly: This layer accepts the message from

the (session) layer, and breaks the message into smaller units. Each of
the segments produced has a header associated with it. The transport
layer at the destination station reassembles the message.
• Service Point Addressing: To deliver the message to the correct
process, the transport layer header includes a type of address called
service point address or port address. Thus by specifying this address,
the transport layer makes sure that the message is delivered to the
correct process.
5.Session Layer
• This layer is responsible for the

establishment of connection, maintenance
of sessions, and authentication, and also
ensures security.
Functions of the Session Layer
• Session establishment, maintenance, and termination: The layer

allows the two processes to establish, use, and terminate a connection.
• Dialog Controller: The session layer allows two systems to start
communication with each other in half-duplex or full-duplex.
6.Presentation Layer
The presentation layer is also called

the Translation layer. The data from the
application layer is extracted here and
manipulated as per the required format to
transmit over the network.
Functions of the Presentation Layer
• Translation: For example, ASCII to EBCDIC.

• Encryption/ Decryption: Data encryption translates the data into
another form or code. The encrypted data is known as the ciphertext
and the decrypted data is known as plain text. A key value is used for
encrypting as well as decrypting data.
• Compression: Reduces the number of bits that need to be transmitted
on the network.
7.Application Layer
The Application layer which is

implemented by the network
applications. These applications
produce the data, which has to be
transferred over the network. This layer
also serves as a window for the
application services to access the
network and for displaying the received
information to the user.
Functions of the Application Layer
• Network Virtual Terminal: It allows a user to log on to a remote host.

• Mail Services: Provide email service.
• Directory Services: This application provides distributed database
sources and access for global information about various objects and
services.
Advantages of OSI Model
• OSI Model defines the communication of a computing system into 7 different

layers.
• Advantages of OSI Model include:
• It divides network communication into 7 layers which makes it easier to
understand and troubleshoot.
• It standardizes network communications, as each layer has fixed functions
and protocols.
• Diagnosing network problems is easier with the OSI model.
• It is easier to improve with advancements as each layer can get updates
separately.

Osi Model

Uploaded by

Copyright:

Available Formats

Osi Model

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Osi Model

Uploaded by

Copyright:

Available Formats

OSI MODEL

Open Systems Interconnections

• The OSI model(Open Systems Interconnections), created in 1984 by

• The OSI model consists of seven abstraction layers arranged in a top-down

• The lowest layer of the OSI reference

• Bit synchronization: The physical layer provides the synchronization of

• The data link layer is responsible for the node-

• The network layer works for the

• Routing: The network layer protocols determine which route is

• The transport layer provides services to

• Segmentation and Reassembly: This layer accepts the message from

• This layer is responsible for the

• Session establishment, maintenance, and termination: The layer

The presentation layer is also called

• Translation: For example, ASCII to EBCDIC.

The Application layer which is

• Network Virtual Terminal: It allows a user to log on to a remote host.

• OSI Model defines the communication of a computing system into 7 different

You might also like