Knauf Cleaneo ENG Brochure 2023
Knauf Cleaneo ENG Brochure 2023
Knauf Cleaneo ENG Brochure 2023
Key Features
Manufactured from
non-combustible gypsum
Construction depth
Ketebalan konstruksi
Thickness (mm) Width (mm) Length (mm) Perforation Weight (kg/m 2) Edge Thickness (mm) Width (mm) Length (mm) Perforation Weight (kg/m 2) Edge
12.5 1188 1998 12.6% 9.9 UFF 12.5 1200 2000 12.6% 10.5 UFF
1200 1875
200 mm
Cleaneo UFC Frame UFC Clip
200 mm
400 mm
1 2 3
Make marking for Wall Angle position. Make Install Wall Angle as perimeter frame using Install Soffit Cleat to building structural
sure the ceiling level is as planned. Pay appropriate fixing with 600 mm distance and element using proper fixing at a distance of
attention to the thickness of gypsum board. 50 mm from edge. 1100 mm and 300 mm from the wall.
4 5 6
Measure the length of Threaded Rod needed. Hang the Upper UFC Frame on T-Rod using Assemble the Lower UFC Frame in 400 mm
Hang T-Rod on Soffit Cleat. Bend upwards UFC Bracket. Make sure there are bolt and nut distance with Upper UFC Frame using UFC
the end with no thread. on UFC Bracket. Clip.
Knauf Indonesia
Palma Tower 21st Floor
Jl. RA Kartini III-S, Kav.6, Sektor II
Pondok Pinang, Kebayoran Lama,
7 8
Jakarta Selatan 12310
Check the evennes by adjusting the bolt and Install the Cleaneo plasterboard with 170 Indonesia
nut on T-Rod. Make sure the position of ower mm screw spacing. Fill the joint with Knauf
frame is right. Tighten the bolt and nut. K-Joint Compound using sealant gun.