Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 9 views

    Lab 2 Edc

    Uploaded by

    231529
    1. The document is a lab report for an introductory circuit simulation course, describing an experiment using Proteus software. 2. The objectives of the experiment were to become familiar with the Proteus software and introduce alternating current circuits in Proteus. 3. The student describes opening Proteus and seeing the main interface, then building a simple circuit with an AC source and resistors to measure voltage and current using a voltmeter and ammeter.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Lab 2 Edc

    Uploaded by

    231529
    9 views4 pages
    1. The document is a lab report for an introductory circuit simulation course, describing an experiment using Proteus software. 2. The objectives of the experiment were to become familiar with the Proteus software and introduce alternating current circuits in Proteus. 3. The student describes opening Proteus and seeing the main interface, then building a simple circuit with an AC source and resistors to measure voltage and current using a voltmeter and ammeter.

    Original Title

    LAB 2 EDC

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1. The document is a lab report for an introductory circuit simulation course, describing an experiment using Proteus software. 2. The objectives of the experiment were to become familiar with the Proteus software and introduce alternating current circuits in Proteus. 3. The student describes opening Proteus and seeing the main interface, then building a simple circuit with an AC source and resistors to measure voltage and current using a voltmeter and ammeter.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    9 views4 pages

    Lab 2 Edc

    Uploaded by

    231529
    1. The document is a lab report for an introductory circuit simulation course, describing an experiment using Proteus software. 2. The objectives of the experiment were to become familiar with the Proteus software and introduce alternating current circuits in Proteus. 3. The student describes opening Proteus and seeing the main interface, then building a simple circuit with an AC source and resistors to measure voltage and current using a voltmeter and ammeter.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    Department of Mechatronics

    Engineering
    Air University, Islamabad, Pakistan

    Program: B.Sc. Mechatronics engineering Semester: II


    Subject MT-145L Electronic devices & circuits Date: February 04, 2024.

    Experiment 2: Introduction to Proteus Circuit Simulation Software

    OBJECTIVES:
    1. To become familiar with software.
    2. Introduction to the AC current in proteus.

    Name: Muhammad Mueen U Din Roll no: 231529

    Performance Lab Report

    Description Total Marks Description Total Marks


    Marks Obtained Marks Obtained
    Ability to 5 Organization/Structure 5
    conduct
    Experiment
    Data Analysis & 5 Results 5
    Interpretation
    Total Marks obtained

    Remarks (if any)………………………………………………..

    Name & Signature of faculty: …………………………………


    Lab Report No.02
    Introduction To Proteus & AC

    Objectives

    1. To become familiar with software.


    2. Introduction to the AC in proteus.

    Introduction:
    First of very all the rules and regulations of the lab. We should be concerned to the things or
    equipment given to us and not to touch or use any circuit unnecessarily making sure not to create any
    disturbance during the lab.

    Proteus is the name of a software used for electronic circuit design and simulation. Engineers use it to
    design, test, and debug electronic circuits on a computer before building them in real life. which can
    save time and resources in the development process. It's a valuable tool for designing and optimizing
    electronic projects.
    This is the main body of the proteus software when we open it. It consists of Working place (where we
    make our desired circuit), Object selector (from we select different items like resistor, potentiometer
    etc.) and also some other necessary options are also available to use.

    Lab work:

    In our lab we made a very basic and our first circuit which consists of Alternating source and Resistors.
    We used voltmeter and ammeter to measure current and voltage across the 200 ohms resistor.
    Conclusion

    In our lab we learned about the professional software to build circuits to test and debug them
    named “Proteus”. We also made our first circuit using this software and lastly, we also did a lab task.
    This whole lab collectively made a great exposure and made us learn to use a new and interesting
    software. we will be using this software to make projects in our future.

    You might also like