Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 19 views

    Engine WIll Not Crank or Cranks QST 30

    Uploaded by

    hinggasetiawan46
    This document provides troubleshooting steps for an engine that will not crank or cranks slowly when using an electric starter. Potential causes include malfunctioning or low batteries, loose or corroded battery connections, engaged engine-driven units, low battery temperature, low oil temperature, damaged starting motor parts, hydraulic lock in cylinders, or internal engine damage. The document outlines tests and repairs to address each potential cause.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Engine WIll Not Crank or Cranks QST 30

    Uploaded by

    hinggasetiawan46
    19 views3 pages
    This document provides troubleshooting steps for an engine that will not crank or cranks slowly when using an electric starter. Potential causes include malfunctioning or low batteries, loose or corroded battery connections, engaged engine-driven units, low battery temperature, low oil temperature, damaged starting motor parts, hydraulic lock in cylinders, or internal engine damage. The document outlines tests and repairs to address each potential cause.

    Original Description:

    Yuhu

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides troubleshooting steps for an engine that will not crank or cranks slowly when using an electric starter. Potential causes include malfunctioning or low batteries, loose or corroded battery connections, engaged engine-driven units, low battery temperature, low oil temperature, damaged starting motor parts, hydraulic lock in cylinders, or internal engine damage. The document outlines tests and repairs to address each potential cause.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    19 views3 pages

    Engine WIll Not Crank or Cranks QST 30

    Uploaded by

    hinggasetiawan46
    This document provides troubleshooting steps for an engine that will not crank or cranks slowly when using an electric starter. Potential causes include malfunctioning or low batteries, loose or corroded battery connections, engaged engine-driven units, low battery temperature, low oil temperature, damaged starting motor parts, hydraulic lock in cylinders, or internal engine damage. The document outlines tests and repairs to address each potential cause.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    Engine Will Not Crank or Cranks Slowly (Electric Starter) https://quickserve.cummins.com/qs3/pubsys2/xml/en/manual/4021539/...

    Engine Will Not Crank or Cranks Slowly (Electric


    Starter)
    Symptom Tree - t078
    Cause Correction

    Check the condition of the batteries. Replace


    Batteries have malfunctioned the batteries, if necessary. Refer to the OEM
    service manual.

    OK

    Battery cables or connections are loose, Check the battery cables and connections.
    broken, or corroded (excessive resistance) Refer to .

    OK

    Engine-driven units are engaged Disengage engine-driven units.

    OK

    Check the battery heater (if equipped) for


    Battery temperature is below specification correct operation. Refer to the
    manufacturer's instructions.

    OK

    Lubricating oil temperature is below Install an oil pan heater, or drain the oil and
    specification the manufacturer's instructions fill the system with warm oil.

    OK

    1 of 3 29/05/2023, 13:58
    Engine Will Not Crank or Cranks Slowly (Electric Starter) https://quickserve.cummins.com/qs3/pubsys2/xml/en/manual/4021539/...

    Change the oil and filters. Refer to Procedure


    007-013 (Lubricating Oil Filter (Spin-On) in
    Lubricating oil does not meet specifications Section 7 (/qs3/pubsys2/xml/en/procedures
    for operating conditions /57/57-007-013-tr.html) . Use the oil type
    recommended in Section V of the operation
    and maintenance manual.

    OK

    Check the crankshaft for ease of rotation.


    Crankshaft rotation is impaired
    Refer to .

    OK
    Refer to Procedure 018-021 (Electrical
    System) in Section V (/qs3/pubsys2/xml/en
    Battery capacity is below specification
    /procedures/57/57-018-021.html) . Replace
    the batteries if necessary.

    OK
    Replace the battery cables with larger gauge
    or shorter length cables. Refer to Procedure
    Battery cables are not the correct gauge or
    013-009 (Battery Cables and Connections) in
    length
    Section 13 (/qs3/pubsys2/xml/en/procedures
    /57/57-013-009.html) .

    OK

    Check the starting circuit components. Refer


    Starting circuit component is malfunctioning
    to the OEM service manual.

    OK

    Remove the starting motor, and inspect the


    Starting motor pinion or ring gear is damaged
    gear. Refer to .

    OK

    2 of 3 29/05/2023, 13:58
    Engine Will Not Crank or Cranks Slowly (Electric Starter) https://quickserve.cummins.com/qs3/pubsys2/xml/en/manual/4021539/...

    Remove the injectors and rotate the


    crankshaft. Look for the source of fluid in the
    cylinder. Refer to Procedures 006-026
    (Injectors) in Section 6 (/qs3/pubsys2/xml/en
    Hydraulic lock in a cylinder
    /procedures/57/57-006-026-tr.html) and
    001-016 (Crankshaft) in Section 1
    (/qs3/pubsys2/xml/en/procedures
    /57/57-001-016-tr.html) .

    OK
    Analyze the oil and inspect the filters to
    locate an area of probable damage. Refer to
    Internal engine damage Procedure 007-083 (Lubricating Oil and Filter
    Analysis) in Section 7 (/qs3/pubsys2/xml/en
    /procedures/99/99-007-083.html) .

    Last Modified: 10-Apr-2008

    3 of 3 29/05/2023, 13:58

    You might also like