Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
78 views

In-Vehicle Networking: Introduce Class

This document provides an overview and introduction to an in-vehicle networking class. It discusses the goals of the class, including providing students with knowledge of in-vehicle network systems, design, development and performance issues. It also introduces the topics that will be covered, such as different network technologies like CAN and Flexray, software development, and the ISO OSI model. It describes conducting a laboratory exercise to demonstrate CSMA/CD network access and addressing through a classroom simulation activity.

Uploaded by

Sambodhi Maji
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
78 views

In-Vehicle Networking: Introduce Class

This document provides an overview and introduction to an in-vehicle networking class. It discusses the goals of the class, including providing students with knowledge of in-vehicle network systems, design, development and performance issues. It also introduces the topics that will be covered, such as different network technologies like CAN and Flexray, software development, and the ISO OSI model. It describes conducting a laboratory exercise to demonstrate CSMA/CD network access and addressing through a classroom simulation activity.

Uploaded by

Sambodhi Maji
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 9

In-Vehicle Networking

Lecture 1 Introduction to in-vehicle networking BAE 5030 - 003 Fall 2008 Instructor: Marvin Stone Biosystems and Agricultural Engineering Oklahoma State University

January 7, 2008

BAE 5030

Goals for Class Today


Introduce class
Goals of the class Teaching style / expectations of students Grading process Content

Introduce the topic of in-vehicle networks


Clarify the focus Set the scope of study

Introduce the ISO Open System Interconnection model Conduct a laboratory exercise to demonstrate
Media access control Addressing CSMA/CD Token ring

January 7, 2008

BAE 5030

Class introduction Prerequisites


BAE 5413, MAE 4733 or equivalent experience

Course Objectives
The objective of this course is to provide students with a working knowledge of in-vehicle network systems and exposure to aspects of design, development, application, and performance issues associated with those systems.

Syllabus on D2L
All handout material, reading materials, assignments will be posted on the web at https://oc.okstate.edu/

Student Deliverables
In-class presentation 25% Class notebook 25% Quizzes 25% Final exam 25%
BAE 5030 3

January 7, 2008

Class subject outline Introduction to OSI and network descriptive structures and network functionality. Network technologies
LIN SAE J1850 SAE J1587/1708 CAN SAE J1939/ISO 11783/NMEA2000 Flexray MOST Ethernet Future network technologies

Software development of embedded distributed systems


January 7, 2008 BAE 5030 4

In-Vehicle Network technologies

W. Wong. Multimedia Automotive Networks. Electronics Design, ED Online ID #14995, March 29,2007.

January 7, 2008

BAE 5030

In-Vehicle Networks
What are they?
A system of physical and logical interconnection enabling communication between components inside a vehicle and between components outside the vehicle and the inside components.

nt me ple Im

ork etw b-n Su

s Bu

VT

Task Controller Mgt. Computer Gateway

GPS

Implement ECU and Implement Bridge Implement ECU Implement ECU

Implement Bus Tractor ECU Hitch Transmission Engine

Tractor Bus

January 7, 2008

BAE 5030

In-Vehicle Networks
What constitutes a network
Distributed computing
Communications among distributed components

Interconnection via:
wiring fiber optics radio other?

Must include in-vehicle components Shared communications media = multiplexing


Method of allocation of access to media

Vehicles
For our purposes mobile equipment
Ag and construction equipment Mining equipment, trucks and buses, automobiles, ships, aircraft etc.

January 7, 2008

BAE 5030

Conventional Wiring (No network?)


Serial Communication Links

Sensors ECUs

Nozzles

NOZZLE ECU

Data Logging

GPS

A Simple Network Application (Serial Bus Network)

Sensors ECUs
Data Bus
Data Logging

Nozzles NOZZLE ECU

Data Bus
GPS

Communications Network Wiring Topology


Bus Star

Ring

January 7, 2008

BAE 5030

10

To form a complete communications system you need multiple functions on both ends

Network Management

Network Management

ISO 7498 Part 1


January 7, 2008 BAE 5030 11

Nature of the ISO Open System Interconnection (OSI) Model

Provides structure and definition for communication of data from one application to another over a network Organized as functional layers
Provide transparent communication services to the layer above Likely implemented as functions or subroutines that are called from the layer above or provide an interrupt to the layer above A full (or partial) set of layers is known as a stack

Use protocol data units


Each layer may have a protocol data unit (PDU) which encapsulates the data from the layer above and adds its own handling instructions for its companion layer in the stack(s) it communicates with. eg.
January 7, 2008 BAE 5030 12

ISO Open System Interconnection Model (ISO 7498-1)


Specifications paraphrased from ISO/IEC 7498-1 : 1994(E)

Application Layer
Contains all those functions which imply communication between open systems that are not already performed by the lower layers. These include functions performed by programs as well as functions performed by human beings.

Presentation Layer
Provides for common representation of the data transferred between application-entities. This relieves application-entities of any concern with the problem of "common" representation of information, i.e., it provides them with syntax independence.

Session Layer
Provides the means necessary for co-operating presentationentities to organize and to synchronize their dialogue and to manage their data exchange. To do this, the Session Layer provides services to establish a session-connection between two presentation-entities, to support orderly data exchange interactions, and to release the connection in an orderly manner.

January 7, 2008

BAE 5030

13

ISO Open System Interconnection Model (ISO 7498-1) Transport Layer


transport-service provides transparent transfer of data between session-entities and relieves them from any concern with the detailed way in which reliable and cost effective transfer of data is achieved.

Network Layer
Provides to the transport-entities independence of routing and relay considerations.

Data Link Layer


Provides for establishment, maintenance, and release of datalink-connections among network-entities and for the transfer of data-link-service-data-units built upon one or several physicalconnections.

Physical Layer
Provides mechanical, electrical, functional and procedural means to activate, maintain, and de-activate physical-connections for bit transmission between data-link-entities.

January 7, 2008

BAE 5030

14

Nature of messaging hierarchy

January 7, 2008

BAE 5030

15

Media sharing techniques Some method must be provided in a network protocol to regulate the use of shared media
Methods include
Time domain multiplexing (assigned time slots) Frequency domain multiplexing (assigned frequency slots) Master/Slave (speak when spoken to) Carrier sense multiple access with collision detection Carrier sense multiple access with bitwise priority access Others

CSMA/CD
Multiple devices using the same media (Multiple access) listen before sending (carrier sense) and listen while sending (collision detection). If a collision is sensed, a random back-off algorithm is used to delay the next communication attempt
January 7, 2008 BAE 5030 16

Laboratory exercise: CSMA/CD multiplex network simulation


OBJECTIVE: To develop first hand experience with the issues and functionality of protocol in a CSMA/CD multiplex network. PROCEDURE: A simulation of a CSMA/CD network will be done by speaking messages within a classroom. Each member of the group will be seated facing away from the rest of the group. Each member will be assigned an address (source address) and will be given a dataset, a brief sentence along with a destination address for the dataset. It is the responsibility of each member of the group to communicate their sentence to the particular member associated with the destination address. The procedure for communication will be to listen for a start command generated by the instructor and to transmit each word of the dataset (sentence) as a message in the sequence the words occur in the sentence. The format of a message should be as follows: Source address : destination address : word : checksum The source address should be the address of the speaker. The destination address should be the destination address of the message. The word should be a word in the sentence. The checksum should be the number of letters in the word. Sending of the complete dataset will require multiple messages. Checksums should be pre-computed before initial sending messages. It is impolite and unacceptable for more than one speaker to speak at the same time. To minimize this problem, the following protocol will be used: The instructor will issue the ticks of a time clock at which a speaker may listen for at least two ticks to assure no other speaker is speaking. If no other speaker is speaking, then the speaker may begin speaking a message. The speaker must listen while speaking to assure no more than his or her message is being spoken. If more than one message is being spoken, then the speakers must refrain from speaking and wait a random number of one to ten time ticks. The speaker may then attempt to transmit the message again. Each member must also listen for messages destined for their address. If a message is being spoken for their address, the member must copy down the data (word) and the checksum to assure the word was heard correctly. Members should turn their seat around to face the group when their message is completely sent. ANALYSIS AND REPORTING: The instructor will ask that the received messages be read by members at the destination addresses in address order and note any inaccuracies. The overall quality of communication should be assessed. Obtain the details of the Ethernet protocol and compare and contrast communications across Ethernet with communications done in this exercise. Prepare a report with the analysis of this exercise and your comparison with Ethernet.

January 7, 2008

BAE 5030

17

You might also like