CRT V3

1.
The inside of a CRT consists of

a) an oxide coating and rare mercury gas
b) a phosphor coating and rare mercury gas
c) iodine and rare mercury gas
2. CRT horizontal beam control is achieved by a

a) square wave
b) sawtooth wave
c) sinusoidal wave
3. In a CRT, if the magnetic field is parallel to the Y plates, what will be the direction of the
electron beam movement?
a) Vertical
b) No movement
c) Horizontal
4. Primary colours of a CRT are

a) red, green and blue
b) red, green and yellow
c) red, blue and yellow
5. What are the effects of the X and Y plates on a CRT?

a) X plates move the beam vertically, Y plates move the beam horizontal
b) Y plates move the beam vertically, X plates move the beam horizontal
c) X and Y plates can move the beam in either direction
6. What frequency creates the raster effect on a CRT?

a) 50/60 Hz
b) 400 Hz
c) 250Hz
7. The sweep waveform used on a electromagnetic CRT is

a) trapezoidal
b) sinusoidal
c) sawtooth
8. Magnetic deflection on a CRT is achieved by a

a) sawtooth waveform
b) trapezoidal waveform
c) sinusoidal waveform
9. What shape does the waveform take to counter the impedence effect of the coils in an
electromagnetic controlled CRT?
a) Trapezoid
b) Sawtooth
c) Rectangular
10. Magnetic deflection in a CRT is achieved by

a) a sawtooth waveform
b) a trapezoidal waveform
c) a sinusoidal voltage
11. The timebase in a CRT consists of

a) an amplifier and an oscillator
b) an oscillator only
c) an amplifier only
12. What creates the raster effect on a CRT?

a) Sawtooth frequency
b) Sinusoidal frequency
c) Trapezoidal
13. LCD screens are driven by

a) ac voltage
b) variable current dc voltage
c) fixed current dc voltage
14. A Liquid Crystal Display (LCD) has the advantage over a CRT because
a) it displays more colours
b) it requires less servicing
c) it requires no cooling
15. If a magnetic field is parallel to the X plates in a CRT, which way will the beam move?
a) Diagonally
b) Vertically
c) Horizontally
16. An LED display is

a) red and green
b) monochrome only
c) high definition
17. An LCD display uses what type of power supply?

a) Continuous AC
b) Variable level DC voltage
c) DC voltage
18. A beam deflection on EFIS displays are

a) electromagnetism
b) electrostatic
c) solid state
19. The method of producing (white) lines for aircraft symbols, V/S scale etc. on an EADI is by
a) stroke scan
b) raster scan
c) trapezoidal input
20. A CRT display has the advantage over an LCD display by

a) brighter clearer output
b) more energy efficient
c) large viewing angle
21. To display a circle on a CRT you use

a) 2 sine waves 180 degrees out of phase
b) 2 sine waves 90 degrees out of phase
c) 2 square wave 90 degrees out of phase
22. To deflect the beam of a CRT horizontally, coils are placed on the neck of the tube
a) one on the side, one at the bottom
b) each side
c) top and bottom
23. The resistance of the magnetic coils of a C.R.T. Is offset by using

a) trapezoidal voltage
b) constant voltage
c) saw tooth voltage
24. The waveform to the coil of a CRT is

a) trapezoidal
b) ramp
c) analogue
25. What causes the X and Y beam deflections in an EFIS CRT display?
a) Electromagnetic
b) Electrostatic
c) Either
26. If part of a display is lost on a CRT, this could be due to

a) an inoperative symbol generator or input sensor
b) an inoperative symbol generator or control panel
c) loss of power to the CRT
27. The most common CRT for an EFIS system screen is a

a) electrostatic
b) electromagnetic
c) combined
28. L.E.D.s can give

a) high definition displays
b) red and green displays only
c) monochrome displays only
29. A circular time constant produces what sort of output?

a) in phase
b)180o out of phase
o
c) 90 out of phase
30. A CRT is
a) electromagnetic
b) electrostatic
c) solid state
31. Colour CRT shadowmask screen resolution is

a) 84 triads
b) 400 lines per square inch
c) 600 lines per scan
32. An LCD display

a) has three colours only
b) has infinite colours
c) is monochrome
33. Electronic CRT beam display is used typically in

a) IRU control display units.
b) distance measuring indicators; digital counters
c) weather radar indicators
34. An LCD which is back lit is

a) monochrome
b) three colours
c) multicoloured
35. What is a passive device?

a) Matrix LCD
b) Capacitor
c) LED
36. What is a passive device?

a) Matrix LCD
b) LED
c) Capacitor
37. A backlighted LCD

a) has infinite colours
b) is monochrome
c) has only 3 colours
38. A dot matrix/LED construction is

a) 4x7 or a 9x5 rolling end display
b) 4x7 or a 5x7 rolling end display
c) 5x9 or a 4x7 rolling end display
39. at low ambient temperatures, an LCD screen

a) loses contrast
b) is slower to update as data changes
c) viewing angle becomes larger
40. The supply to an LCD is

a) AC
b) current restricted DC
c) voltage restricted DC
41. If the magnetic deflection plates produce a magnetic field which is parallel to the
horizontal then the trace is deflected in
a) horizontal axis
b) circular motion
c) vertical axis
42. A sinusoidal circular time constant produces what output?

a) 90 degrees out of phase
b) 180 degrees out of phase
c) In phase
43. in a colour cathode ray tube, how is the phosphor arranged in the tube?
a) A red layer on the front with two green layers behind it
b) Layers of red, blue and green
c) A single phosphor layer containing red, green and blue
1 B 11 A 21 B 31 A 41 C 51
2 B 12 A 22 C 32 A 42 A 52
3 A 13 A 23 A 33 C 43 C 53
4 A 14 C 24 A 34 C 44 54
5 B 15 C 25 A 35 B 45 55
6 A 16 B 26 A 36 C 46 56
7 A 17 A 27 C 37 C 47 57
8 B 18 A 28 C 38 B 48 58
9 A 19 A 29 C 39 B 49 59
10 B 20 C 30 A 40 A 50 60

CRT V3

Uploaded by

Copyright:

Available Formats

CRT V3

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

CRT V3

Uploaded by

Copyright:

Available Formats

1.

The inside of a CRT consists of

2. CRT horizontal beam control is achieved by a

4. Primary colours of a CRT are

5. What are the effects of the X and Y plates on a CRT?

6. What frequency creates the raster effect on a CRT?

7. The sweep waveform used on a electromagnetic CRT is

8. Magnetic deflection on a CRT is achieved by a

10. Magnetic deflection in a CRT is achieved by

11. The timebase in a CRT consists of

12. What creates the raster effect on a CRT?

13. LCD screens are driven by

16. An LED display is

17. An LCD display uses what type of power supply?

18. A beam deflection on EFIS displays are

20. A CRT display has the advantage over an LCD display by

21. To display a circle on a CRT you use

23. The resistance of the magnetic coils of a C.R.T. Is offset by using

24. The waveform to the coil of a CRT is

26. If part of a display is lost on a CRT, this could be due to

27. The most common CRT for an EFIS system screen is a

28. L.E.D.s can give

29. A circular time constant produces what sort of output?

31. Colour CRT shadowmask screen resolution is

32. An LCD display

33. Electronic CRT beam display is used typically in

34. An LCD which is back lit is

35. What is a passive device?

36. What is a passive device?

37. A backlighted LCD

38. A dot matrix/LED construction is

39. at low ambient temperatures, an LCD screen

40. The supply to an LCD is

42. A sinusoidal circular time constant produces what output?

You might also like