Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 58 views

    DL 2102al Ing

    Uploaded by

    Kamanzi

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    DL 2102al Ing

    Uploaded by

    Kamanzi
    58 views8 pages

    Original Title

    Dl 2102al Ing

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    58 views8 pages

    DL 2102al Ing

    Uploaded by

    Kamanzi

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 8

    DL 2102AL

    Three-Phase Power Supply

    DL 2102AL

    Rev.
    1 20180327 Copyright © 2018 De Rev.
    Lorenzo S.p.A.
    20180327
    DL 2102AL

    CONTENTS

    1. SAFETY Pag. 3

    2. LIABILITY Pag. 4

    3. DL 2102AL - THREE-PHASE POWER SUPPLY Pag. 5

    4. INSTALLATION Pag. 6

    5. MAINTENANCE, STORAGE AND REPAIR Pag. 7

    Rev. 20180327 2
    DL 2102AL

    1. SAFETY
    The use of the module must be done with awareness and responsibility under teacher’s su-
    pervision.
    This module is intended for general purpose uses in didactic applications. It cannot be used for
    industrial applications.
    The following general safety precautions must be observed during all phases of installation and
    operation of this module:
    ¾¾ installation and operation of this module must be performed by qualified personnel only
    and according to the relevant Rules,
    ¾¾ servicing can be performed at Factory only,
    ¾¾ before installing the module, make sure that the housing is not damaged, otherwise the
    module must be rejected and returned to the Factory for servicing.
    ¾¾ ensure that the line and auxiliary power supply are switched off before connecting the mod-
    ule to the circuits,
    ¾¾ ground must be securely connected; if the ground is not securely connected, it could lead
    to electric shock or fire,
    ¾¾ connect the module as shown in the wiring diagrams,
    ¾¾ make sure to operate the module according to the technical specifications as listed in this
    Manual,
    ¾¾ turn the power on only after completing the cabling of the exercise,
    ¾¾ never remove the leads when the power is on,
    ¾¾ always use safety cables for power connections,
    ¾¾ do not operate the module in an explosive atmosphere and in presence of flammable liq-
    uids or vapours,
    ¾¾ the operating conditions must be in the range as specified in this Manual,
    ¾¾ never attempt to open the module's housing for any reason,
    ¾¾ do not install the module in any location where it could come in contact with water or other
    fluids,
    ¾¾ water or other liquid cleaners must be avoided,
    ¾¾ never connect the input power to the output,
    ¾¾ failure to comply with these precautions and with the instructions given elsewhere in this
    Manual violates safety standards of design, manufacture, and intended use of this module.

    WARNING

    The module is equipped with live parts.


    Non-compliance with health & safety regulations may result in the endangering of personnel
    and damage to the module.
    Carefully operate the module. In the large majority of electrical and electronic devices, the
    leading cause of electrical hazards is the power of the device. This danger can be eliminated by
    switching off the power. Consequently, before any operation on the module, take the following
    precautions:
    ¾¾ always use safety cables provided by the manufacturer,
    ¾¾ check the absence of the mains voltage or of residual voltages.

    3 Rev. 20180327
    DL 2102AL

    2. LIABILITY

    Use of this operating manual assists in the safe and proper assembly, commissioning, mainte-
    nance and repair of the module.

    De Lorenzo S.p.A. accepts no liability for damages during the period covered by the warranty
    as a result of:
    ¾¾ inappropriate or incompetent use,
    ¾¾ irresponsible or incorrect assembly and/or commissioning by operators,
    ¾¾ subsequent modifications by operators,
    ¾¾ natural wear and tear,
    ¾¾ negligent or incorrect handling, servicing or maintenance,
    ¾¾ actions not in accordance to the instruction manual,
    ¾¾ use of inappropriate materials,
    ¾¾ faults which arise from the use of spare parts / accessories not recommended or supplied
    by the manufacturer.

    Rev. 20180327 4
    DL 2102AL

    3. DL 2102AL - THREE-PHASE POWER SUPPLY

    1. Differential magneto thermal switch, physiological threshold 30 mA


    2. Power supply pilot lamp
    3. Key with block
    4. Active terminal pilot lamps
    5. Power supply terminals at mains voltage
    6. Ground terminal

    Technical specifications

    ¾¾ Power supply: from the three-phase mains plus neutral


    ¾¾ Supply on safety terminals at mains voltage
    OPERATING INSTRUCTIONS
    Connect the power supply module to the mains trough the supply cable.

    By activating the magneto thermal switch, you activate the supply and the relevant pilot lamp
    (2).

    By activating also the unblocking key (3), you activate the supply at the safety terminals (5) and
    the relevant pilot lamps (4).

    5 Rev. 20180327
    DL 2102AL

    4. INSTALLATION

    The procedure for the installation of the modules into the frame is shown below.

    Example of module installation

    First of all, it is necessary to position the back of the module into the frame.

    Then, insert the upper part of the module into the upper frame guide.

    Finally, push the rest of the module inside and let the module slip down in the lower frame
    guide. Release the module and check if it is well fixed.

    Rev. 20180327 6
    DL 2102AL

    5. MAINTENANCE, STORAGE AND REPAIR

    MAINTENANCE
    For safety reasons, only qualified personnel may carry out maintenance and repair activities.

    Qualified personnel are those persons who, according to their professional training, experience and instruction,
    have sufficient knowledge of:
    ¾¾ health & safety regulations,
    ¾¾ accident prevention regulations,
    ¾¾ guide lines and acknowledged technical standards.

    The qualified personnel must:


    ¾¾ be able to assess the work assigned to them and recognize and avoid possible dangers,
    ¾¾ be authorized by those responsible for health & safety at work to carry out the required work.
    The module does not need any special preventive maintenance.

    STORAGE
    Short term storage
    If the module is not immediately installed, it can be stored in a dry room and in an area that is free from vibrations.

    Long term storage


    If the module has to be stored for a large period of time, it has to be stored in a well ventilated, dry room. The
    storage area must be free from dust and vibrations as much as possible.
    The module must be well covered to protect it from dust.
    An improper storage can cause damage to the module.
    Take precautions in case of extreme weather conditions or in humid environments with salt and/or dust.
    Choose a storage place that is flood-proof, dry and vibration free. Before storing, repair any possible damage to
    the packaging, if this is necessary for proper storage.
    If necessary, place the module on pallets, wooden beams or foundations to ensure protection against soil moi-
    sture. Prevent that a collapse occurs on the floor. Do not obstruct the air circulation around the stored module.

    CLEANING
    Do not wash the module with water or other liquids.
    In the event of severe dirt deposits, dismantle the module and remove the deposits using suitable cleaning agents.

    TROUBLE SHOOTING / REPAIR INSTRUCTIONS


    A faulty module can only be repaired by qualified personnel at the request of the person responsible for the
    installation. Inform the manufacturer when damage occurs during the warranty period. When determining the
    cause of a malfunction, or during repair, observe the following:
    ¾¾ applicable rules,
    ¾¾ accident prevention regulations.
    Ensure that the module is switched off. Lock it against reactivation and designate such by placing a warning sign
    next to the activation switch. Ascertain that the module is not live! Cover or cordon off any neighbouring parts,
    which are live! Ensure that the auxiliary circuits are switched off.

    7 Rev. 20180327
    Printed in Italy - All rights reserved

    DE LORENZO SPA
    Viale Romagna, 20 - 20089 Rozzano ( MI ) - Italy
    Tel. +39 02 8254551 - Fax +39 02 8255181
    E-mail : info@delorenzo.it
    website : www.delorenzoglobal.com

    You might also like