Advanced Micro Scanner

New 2011 Version
MCS831E–ADX
www.mscontrols.com ADVANCED MICRO SCANNER ISO 9001:2008 Certified Company
FEATURES
Universal input
Advanced - Dual microcontroller based
User programmable
• Alarm logic
• Relay grouping
• Sensor break logic
• Channel name - 3 digit
• Units display
Front panel calibration
20000 count optically isolated ADC
Self diagnostics with error code
Universal power supply or 24VDC PS
OPTIONAL:
One 4-20mA retransmission output corresponding to highest temperature input
RS232 / RS485 communications for DAS front end applications
MicroDAS software for single or multi scanner applications
MCS831E-ADX is the latest series of advanced cost effective temperature and process scanners
from Micro Systems & Controls.
It incorporates advanced software features and a dual micro controller based design to provide
complete user flexibility and can cater to almost all monitoring and data acquisition needs of the
user. It can be user programmed to cover different application needs thus reducing time, inventory
and spares cost. It has a programmable universal input and accepts direct signals from
thermocouples, RTDs and linear voltage and current inputs. Each channel is sequentially scanned
and active channels are displayed, Individual channels can be locked for monitoring using the
HOLD key. Flexible alarm logic and grouping is provided to energize alarm relay outputs as per
the process parameter values and programmed set points.
Serial communication options are provided to enable the scanner to be used in DAS front-end
applications. Optional windows based MicroDAS software is also available from 8 to 128 channels
for monitoring and data logging using multidrop RS485 option.
INPUT TABLE
INPUTS TYPE & RANGE RESOLUTION

8types: J = 0 to 700°C, K = 0 to 1200°C, R= -50 to 1765°C, S= 0 to 1766°C,
Thermocouple 1 digit
T= -100 to 400°C, E= -100 to 1000°C, B= 250 to1820°C, N= -200 to 1300°C
PT100 = -200 to 600°C, PT100 = -199.9 to 400.0°C, PT46 = 0 to 200°C, PT100: 1 & 0.1 Deg
RTD
Ni100 = 0 to 200°C, Cu53 = 0 to 150°C, Cu50 = 0 to 150°C Others: 1 Deg
DC Volts 0 to 5V or 1 to 5V Range –1999 to +9999 programmable. 1 to 0.001
0 to 20mA or 4 to 20mA Range –1999 to+9999 using 150 ohms conditioning
mA 1 to 0.001
resistance.
MICRO SYSTEMS & CONTROLS Data Sheet No: DS-904 Issue 04 Rev 00
ADVANCED MICRO SCANNER MCS831E-ADX
SPECIFICATIONS:
Inputs Universal input, refer input table
No of channels 8, 12 or 16 channels
Input Connections Rugged user friendly 45 Deg screw terminals suitable for 0.2 to 2.5 mm sq mm cable
Input Impedance > 1 Meg Ohm
1) Upto 8 1C/O Relay outputs
Output
2) Optional 1 no. isolated 4-20mA output
Relay Grouping Programmable – Any alarm can be assigned to any relay
Relay Rating 1 C/O, 5 Amps / 230VAC resistive max.
Alarm set points Two individual alarm settings per channel
12.7 mm, 7segment Red LED- 2 digits for channel value, 4 digits for process value.
Display 3 digits user programmable multi function display (Name, Units, Type etc)
Status LEDs: Prog, Run, Hold, Error, Tx, Rx & Deg C.
Alarm LEDs Individual A1 & A2 LEDs per channel, Latching or non Latching
ADC 20,000 count optically isolated ADC with dedicated microcontroller
Compensations Automatic - Cold junction for TC, Wire resistance for RTDs
Accuracy +/- 0.1 % FS, +/- 1 count
Resolution Programmable as per Input table.
Noise Rejection Common mode 120 dB or better, Series mode 60dB or better.
Alarm Logic Programmable High, Low, Very High, Very Low Latching & Non Latching
Display Scan 1 to 99 seconds programmable, Auto and Manual with HOLD
Internal Scan Rate 10 channels per second
Communications Optional RS232 or RS485, MODBUS RTU
Software Optional Windows MicroDAS data acquisition package for single or multi scanner
Battery Backup Non-volatile EEPROM, Battery not required.
Power Supply Universal 90-260VAC/110-250VDC, 10VA max or 24V DC +/-10%, 0.5A max (as per ordering code)
Sensor break/Error Programmable Enable or Disable Alarm with ‘open’ / ’short’ indication.
Protection Password protection for configuration, Watchdog for system monitoring.
Environment Temp: -10 to + 60 Deg C Max, RH: Up to 95% non condensing
Enclosure Robust metallic powder coated enclosure with plastic bezel.
Protection Class IP65 Front panel
Mounting Flush on panel with screw type clamps 2 Nos
Dimensions External: 96(W) X 192 (H) X 250 (D) mm.
Panel Cutout 92 –0, +1 mm X 186 –0, +1 mm Vertical, Depth behind panel: 240 mm
Gross Weight 2.0 Kg Approx
Accessories: 1) Two nos Screw clamps for mounting. 2) 150 Ohms conditioning resistances.
ORDERING CODE:
MCS831EADX - - - - -
OUTPUT 1 POWER
FUNCTION 1M0 No relay output PU Universal SMPS
FS Standard 1M4 4 Relay output PL 24VDC
1M8 8 Relay output
SAMPLE ORDER CODE No. of INPUTS OUTPUT 2 (optional)
MCS831EADX - FS - N8 - 1M4 - 2M4 - PU
Standard version, 8 Inputs, 4 Relay Outputs,
N8 8 inputs 2M0 No option
RS485 option, Universal SMPS N12 12 inputs 2M2 RS232
N16 16 inputs 2M4 RS485
2MA One 4-20mA O/p isolated
MICRO SYSTEMS & CONTROLS Ph: (033)-2416-3135 / 2416-8933 Fax: +91-33-2416-8933, +91-33-2416-3135
140A, Santoshpur Avenue Email: sales@mscontrols.com
Kolkata 700075, West Bengal, India Web: http://www.mscontrols.com
As product development is a continuous process, information in this catalog is subject to change without notice. 2011.03

Advanced Micro Scanner

Uploaded by

Copyright:

Available Formats

Advanced Micro Scanner

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Advanced Micro Scanner

Uploaded by

Copyright:

Available Formats

New 2011 Version

INPUTS TYPE & RANGE RESOLUTION

You might also like