Page 1/6

Safety data sheet

according to 1907/2006/EC
Printing date 14.09.2015 Version number 12 Revision: 14.09.2015

* SECTION 1: Identification of the substance/mixture and of the

company/undertaking
· 1.1 Product identifier
· Trade name: Struktol WB 212
· Article number: 01005
· 1.2 Relevant identified uses of the substance or mixture and uses advised against
No further relevant information available.
· Application of the substance / the mixture Processing aid.
· 1.3 Details of the supplier of the safety data sheet
· Manufacturer/Supplier:
Schill+Seilacher "Struktol" GmbH
Moorfleeter Str. 28
D-22113 Hamburg
Phone: +49 / (0)40 / 73362-0
Fax: +49 / (0)40 / 73362-194
· Further information obtainable from:
CLP - Documentation
E-Mail: msds@struktol.de
· 1.4 Emergency telephone number:
GIZ-Nord
Phone: +49 / (0)551 / 19240

* SECTION 2: Hazards identification

· 2.1 Classification of the substance or mixture
· Classification according to Regulation (EC) No 1272/2008
The product is not classified according to the CLP regulation.
· 2.2 Label elements
· Labelling according to Regulation (EC) No 1272/2008 Void
· Hazard pictograms Void
· Signal word Void
· Hazard statements Void
· 2.3 Other hazards
· Results of PBT and vPvB assessment
· PBT: Not applicable.
· vPvB: Not applicable.

SECTION 3: Composition/information on ingredients

· 3.2 Chemical characterisation: Mixtures
· Description:
Mixture of high molecular aliphatic fatty acid esters and condensation products, bound to
chemical indifferent fillers.
· Dangerous components: Void
· Additional information: For the wording of the listed risk phrases refer to section 16.
GB
(Contd. on page 2)

41.2.4
 Page 2/6
Safety data sheet
according to 1907/2006/EC
Printing date 14.09.2015 Version number 12 Revision: 14.09.2015

Trade name: Struktol WB 212

(Contd. of page 1)

* SECTION 4: First aid measures

· 4.1 Description of first aid measures
· General information: No special measures required.
· After inhalation: Supply fresh air; consult doctor in case of complaints.
· After skin contact:
Wash off with water and soap.
If skin irritation continues, consult a doctor.
· After eye contact: Rinse opened eye for several minutes under running water.
· After swallowing: If symptoms persist consult doctor.
· 4.2 Most important symptoms and effects, both acute and delayed
No further relevant information available.
· 4.3 Indication of any immediate medical attention and special treatment needed
No further relevant information available.

SECTION 5: Firefighting measures

· 5.1 Extinguishing media
· Suitable extinguishing agents:
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
· For safety reasons unsuitable extinguishing agents: Water with full jet
· 5.2 Special hazards arising from the substance or mixture
In case of fire, the following can be released:
Carbon monoxide and carbon dioxide
· 5.3 Advice for firefighters
· Protective equipment: Do not inhale explosion gases or combustion gases.

* SECTION 6: Accidental release measures

· 6.1 Personal precautions, protective equipment and emergency procedures
Not required.
· 6.2 Environmental precautions:
The product should not be released into the aquatic environment without preliminary
treatments (purification plant).
Do not allow to enter sewers/ surface or ground water.
· 6.3 Methods and material for containment and cleaning up: Pick up mechanically.
· 6.4 Reference to other sections
See Section 7 for information on safe handling.
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.

* SECTION 7: Handling and storage

· 7.1 Precautions for safe handling
The usual precautionary measures are to be adhered to when handling chemicals.
· Information about fire - and explosion protection: No special measures required.
· 7.2 Conditions for safe storage, including any incompatibilities
· Storage:
· Requirements to be met by storerooms and receptacles: Store in a cool location.
(Contd. on page 3)
GB

41.2.4
 Page 3/6
Safety data sheet
according to 1907/2006/EC
Printing date 14.09.2015 Version number 12 Revision: 14.09.2015

Trade name: Struktol WB 212

(Contd. of page 2)
· Information about storage in one common storage facility: Not required.
· Further information about storage conditions: Store in dry conditions.
· 7.3 Specific end use(s) No further relevant information available.

* SECTION 8: Exposure controls/personal protection

· Additional information about design of technical facilities:
No further data; see item 7.
· 8.1 Control parameters
· Ingredients with limit values that require monitoring at the workplace:
The product does not contain any relevant quantities of materials with critical values that
have to be monitored at the workplace.
· Additional information: The lists valid during the making were used as basis.
· 8.2 Exposure controls
· Personal protective equipment:
· General protective and hygienic measures:
The usual precautionary measures are to be adhered to when handling chemicals.
· Respiratory protection: Not necessary if room is well-ventilated.
· Protection of hands:
Protective gloves or protective skin cream.
The glove material has to be impermeable and resistant to the product/ the substance/ the
preparation.
Selection of the glove material on consideration of the penetration times, rates of diffusion
and the degradation.
· Material of gloves
In cooperation with the glove manufacturer KCL, we recommend following the gloves:
Fluorocarbon rubber (Viton)
Nitrile rubber, NBR
Butyl rubber, BR
The selection of the suitable gloves does not only depend on the material, but also on
further marks of quality and varies from manufacturer to manufacturer. As the product is a
preparation of several substances, the resistance of the glove material can not be
calculated in advance and has therefore to be checked prior to the application.
· Penetration time of glove material
The exact break trough time has to be found out by the manufacturer of the protective
gloves and has to be observed.
Value for the permeation: Level ≥ 6
· Eye protection: Not required.
· Body protection: Protective work clothing

* SECTION 9: Physical and chemical properties

· 9.1 Information on basic physical and chemical properties
· General Information
· Appearance:
Form: Solid
Colour: Light
· Odour: Uncharacteristic.
(Contd. on page 4)
GB

41.2.4
 Page 4/6
Safety data sheet
according to 1907/2006/EC
Printing date 14.09.2015 Version number 12 Revision: 14.09.2015

Trade name: Struktol WB 212

(Contd. of page 3)
· Odour threshold: Not determined.
· pH-value: Neutral
· Change in condition
Boiling point/Boiling range: Not determined.
Dropping point: ~55 °C (DIN 51801)
· Flash point: > 200 °C (DIN/ISO 2592)
· Flammability (solid, gaseous): Not determined.
· Ignition temperature:
Decomposition temperature: Not determined.
· Self-igniting: Product is not selfigniting.
· Danger of explosion: Product does not present an explosion hazard.
· Explosion limits:
Lower: Not determined.
Upper: Not determined.
· Vapour pressure: Not applicable.
· Density at 20 °C: 1.15 g/cm³ (DIN 53479)
· Bulk density at 20 °C: ~700 kg/m³ (DIN 53644)
· Relative density Not determined.
· Vapour density Not applicable.
· Evaporation rate Not applicable.
· Solubility in / Miscibility with
water: Insoluble.
· Partition coefficient (n-octanol/water): Not determined.
· Viscosity:
Dynamic: Not applicable.
Kinematic: Not applicable.
· 9.2 Other information No further relevant information available.

SECTION 10: Stability and reactivity

· 10.1 Reactivity No further relevant information available.
· 10.2 Chemical stability
· Thermal decomposition / conditions to be avoided:
No decomposition if used according to specifications.
· 10.3 Possibility of hazardous reactions No dangerous reactions known.
· 10.4 Conditions to avoid No further relevant information available.
· 10.5 Incompatible materials: No further relevant information available.
· 10.6 Hazardous decomposition products:
No dangerous decomposition products known.
GB
(Contd. on page 5)

41.2.4
 Page 5/6
Safety data sheet
according to 1907/2006/EC
Printing date 14.09.2015 Version number 12 Revision: 14.09.2015

Trade name: Struktol WB 212

(Contd. of page 4)

SECTION 11: Toxicological information

· 11.1 Information on toxicological effects
· Acute toxicity
· Primary irritant effect:
· Skin corrosion/irritation Based on available data, the classification criteria are not met.
· Serious eye damage/irritation
Based on available data, the classification criteria are not met.
· Respiratory or skin sensitisation
Based on available data, the classification criteria are not met.
· CMR effects (carcinogenity, mutagenicity and toxicity for reproduction)
· Germ cell mutagenicity Based on available data, the classification criteria are not met.
· Carcinogenicity Based on available data, the classification criteria are not met.
· Reproductive toxicity Based on available data, the classification criteria are not met.
· STOT-single exposure Based on available data, the classification criteria are not met.
· STOT-repeated exposure Based on available data, the classification criteria are not met.
· Aspiration hazard Based on available data, the classification criteria are not met.

SECTION 12: Ecological information

· 12.1 Toxicity
· Aquatic toxicity: No further relevant information available.
· 12.2 Persistence and degradability No further relevant information available.
· 12.3 Bioaccumulative potential No further relevant information available.
· 12.4 Mobility in soil No further relevant information available.
· Additional ecological information:
· General notes:
Do not allow product to reach ground water, water course or sewage system.
· 12.5 Results of PBT and vPvB assessment
· PBT: Not applicable.
· vPvB: Not applicable.
· 12.6 Other adverse effects No further relevant information available.

SECTION 13: Disposal considerations

· 13.1 Waste treatment methods
· Recommendation
Must not be disposed together with household garbage. Do not allow product to reach
sewage system.
Disposal must be made according to official regulations.
· Uncleaned packaging:
· Recommendation: Disposal must be made according to official regulations.

SECTION 14: Transport information

· 14.1 UN-Number
· ADR, ADN, IMDG, IATA Void
(Contd. on page 6)
GB

41.2.4
 Page 6/6
Safety data sheet
according to 1907/2006/EC
Printing date 14.09.2015 Version number 12 Revision: 14.09.2015

Trade name: Struktol WB 212

(Contd. of page 5)
· 14.2 UN proper shipping name
· ADR, ADN, IMDG, IATA Void
· 14.3 Transport hazard class(es)
· ADR, ADN, IMDG, IATA
· Class Void
· 14.4 Packing group
· ADR, IMDG, IATA Void
· 14.5 Environmental hazards: Not applicable.
· 14.6 Special precautions for user Not applicable.
· 14.7 Transport in bulk according to
Annex II of Marpol and the IBC Code Not covered in this data sheet.
· Transport/Additional information: Not dangerous according to the above
specifications.
· UN "Model Regulation": Void

* SECTION 15: Regulatory information

· 15.1 Safety, health and environmental regulations/legislation specific for the
substance or mixture
· Directive 2012/18/EU
· Named dangerous substances - ANNEX I None of the ingredients is listed.
· National regulations:
· Breakdown regulations:
· Breakdown regulations, Annex II, No.:
None of the ingredients is listed.
· 15.2 Chemical safety assessment:
A Chemical Safety Assessment has not been carried out.

* SECTION 16: Other information

This information is based on our present knowledge. However, this shall not constitute a
guarantee for any specific product features and shall not establish a legally valid
contractual relationship.
· Department issuing MSDS: CLP - Documentation
· * Data compared to the previous version altered.
GB

41.2.4