1N5415 THRU 1N5420

GLASS PASSIVATED FAST SWITCHING RECTIFIER

Reverse Voltage - 50 to 600 Volts Forward Current - 3.0 Amperes

FEATURES
♦ Glass passivated cavity-free junction
*

Case Style G4
♦ High temperature metallurgically bonded construction
D
E

♦ Hermetically sealed package

T

♦ Capable of meeting
N
E

environmental
T

1.0 (25.4)
A

MIN.
0.180 (4.6) standards of
P

0.115 (2.9)
DIA. MIL-S-19500
♦ Fast switching for
high efficiency
0.300 (7.6)
MAX. ♦ High temperature soldering guaranteed:
350°C/10 seconds, 0.375" (9.5mm) lead length,
5 lbs. (2.3kg) tension
0.042 (1.07)
1.0 (25.4)
0.038 (0.962)
DIA.
MIN. MECHANICAL DATA
Case: Solid glass body
Terminals: Solder plated axial leads, solderable per
MIL-STD-750, Method 2026
Dimensions in inches and (millimeters) Polarity: Color band denotes cathode end
*Brazed-lead assembly is covered by Patent No. 3,930,306 Mounting Position: Any
Weight: 0.037 ounce, 1.04 grams

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS

Ratings at 25°C ambient temperature unless otherwise specified.

SYMBOLS 1N5415 1N5416 1N5417 1N5418 1N5419 1N5420 UNITS

*Maximum repetitive peak reverse voltage VRRM 50 100 200 400 500 600 Volts
Maximum RMS voltage VRMS 35 70 140 280 350 420 Volts
*Maximum DC blocking voltage VDC 50 100 200 400 500 600 Volts
*Minimum reverse breakdown voltage at 50µA VBR 55 110 220 440 550 660 Volts
*Maximum average forward rectified current
I(AV) 3.0 Amps
0.375” (9.5mm) lead lengths atTA=55°C
Peak forward surge current
8.3ms single half sine-wave superimposed IFSM 80.0 Amps
on rated load (JEDEC Method) at TA=100°C
Maximum instantaneous forward voltage at 3.0A* 1.10
VF Volts
9.0A 1.50
Maximum DC reverse current *TA=25°C 1.0
at rated DC blocking voltage TA=100°C IR 20.0 µA
*TA=175°C 2.0
*Maximum reverse recovery time (NOTE 1) trr 150 250 400 ns
*Maximum junction capacitance (NOTE 2) CJ 200 175 150 120 110 100 pF
Typical thermal resistance (NOTE3) RΘJA 22.0 °C/W
*Operating and storage temperature range TJ,TSTG -65 to +175 °C

NOTES:
(1) Reverse recovery test conditions: IF=0.5A, IR= 1.0A, Irr=0.25A
(2) Measured at 1.0 MHZ and applied reverse voltage of 12.0 Volts
(3) Thermal resistance from junction to ambient at 0.375" (9.5mm) lead length, with both leads to heat sink
*JEDEC registered values

4/98
 RATINGS AND CHARACTERISTIC CURVES 1N5415 THRU 1N5420

FIG. 2 - MAXIMUM NON-REPETITIVE PEAK

FIG. 1 - FORWARD CURRENT DERATING CURVE
FORWARD SURGE CURRENT
4.0
AVERAGE FORWARD CURRENT,

200

PEAK FORWARD SURGE CURRENT,

TA=100°C
L=0.375" (9.5mm) 8.3ms SINGLE HALF-WAVE
SINE-WAVE (JEDEC Method)
3.0
100
AMPERES

0.8 x 0.8 x .040"

AMPERES
2.0 (20 x 20 x 1mm) COPPER
HEATSINKS

1.0
RESISTIVE OR
INDUCTIVE LOAD
0
0 25 50 75 100 125 150 175 200
AMBIENT TEMPERATURE,°C
10
1 10 100
NUMBER OF CYCLES AT 60 Hz

FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG. 4 -TYPICAL REVERSE CHARACTERISTICS

30
50

10 TJ=150°C
INSTANTANEOUS FORWARD CURRENT,

10
AVERAGE REVERSE CURRENT, TJ=125°C
TJ=25°C
MICROAMPERES
PULSE WIDTH=300µs
1%DUTY CYCLE 1
AMPERES

TJ=75°C

0.1
0.1

TJ=25°C
0.01 0.01
0 20 40 60 80 100
0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0
PERCENT OF RATED PEAK REVERSE
INSTANTANEOUS FORWARD VOLTAGE, VOLTAGE, %
VOLTS

FIG. 5 - TYPICAL JUNCTION CAPACITANCE

100
TJ=25°C
JUNCTION CAPACITANCE, pF

f=1.0 MHz
Vsig=50mVp-p

10
1 10 100
REVERSE VOLTAGE, VOLTS