ME3201
ME3201
ME3201
(b) Discuss different work and tool holding devices in drilling operation with suitable [6]
diagram.
2. (a) Discuss the different process parameters of abrasive jet machining (AJM) process. [4+6]
With suitable diagram explain the working principle, merits and demerits of AJM.
(b) What do you mean by non-traditional machining process? Discuss the [2+3]
characteristic features of non-traditional machining process.
3. (a) Differentiate between shaping and planning process. Show the connections of [4+3]
Generatrix and Directrix with tool-work motions in planning operation with
suitable diagram
(b) What do you mean by broach? Discuss different types of broaching operation? [1+2+5]
Draw a broach tool and discuss its different parts.
4. (a) A peripheral milling operation is performed to remove 8 mm from the top surface [6]
of a metallic work with dimensions 280 mm × 70 mm × 16 mm. The cutter has
six teeth and is 60 mm diameter. The cutter overhangs the width of the work part
on both sides. The feed/tooth is 0.2 mm/tooth and cutting speed is 70 m/min.
Calculate the material removal rate and machining time for 2 passes. (Consider
approach distance)
(b) Explain the angular indexing with suitable example. [4]
5. (a) Discuss the working principle of centerless grinding process with neat sketch. [5]
(b) Calculate the drilling time required for drilling a 60 mm length and 30 mm [4]
diameter through hole in alloy steel at a cutting speed of 50 m/min and a feed of
0.15 mm/rev with taking into consideration of approach allowance. (Point angel
is 118°)
(c) What are the various drilling-related operations? Define four of them with neat [2+4]
sketch.