Alarm Annunciators

• Standard models available from 2 to 48 windows • Four SPDT relay outputs (2 for grouping,
• Choice of 3 window sizes and 6 different 1 for external hooter, 1 for ring back sequence)
window colours • 7 Field selectable operation sequences
• Optically isolated fault inputs with wide fault as per ISA standard
input voltage range (12 - 240V AC/DC +/-10%) • Integral buzzer for audible alarm output of
• Field selection for NO / NC fault input contacts, 80 dB
grouping of alarms, window size configuration • Communication interface with
• Space saving due to lower depth of only 100mm RS485 Modbus RTU protocol
• Integral push buttons for Test, Acknowledge, • Replaceable LEDs, Fast Scan, Manned /
Mute and Reset operations Unmanned, Supervisory Relay & Supply fail
annunciation available

Working Principle

Whenever there is a change of input contacts from Normally Open to Close or from Normally Close to Open position,
annunciator changes from rest condition to alarm condition.
Hence there is an immediate recognition of fault input which will have a corresponding visual and audio alarm as per the
particular selected program sequence.
The base unit of alarm annunciator has four programmable keys for Mute, Acknowledge, Reset & Test function.
On pressing the Mute key the internal buzzer can be deactivated. Acknowledge key is used to accept the fault condition,
Reset key enables to reset the alarm annunciator to its default state and Test key helps to perform the complete test of
the system.

226
Technical Specifications
Parameters Fast Scan Normal Scan
Supply Voltage ( ) 90 - 270 V AC/DC or 18 - 60 V DC
Supply Frequency (AC) 50/60 Hz
LED Indication (Green) ON - Healthy / Manned Mode ON - Healthy
Blinking - Unmanned Mode Blinking - Error [Fast Blinking Rate -
[Slow Blinking Rate - 300msec ON, 3sec OFF] 500msec Cyclic ON/OFF]
Blinking - Error Error:
[Fast Blinking Rate - 500msec Cyclic ON/OFF] 1) User selected wrong windows configuration
Error: 1) User selected wrong windows configuration 2) Number of windows are more than
2) Slave Communication error number of fault inputs.
No. of Windows 2 to 48 windows in different configurations
Window Size Small: 34x31mm, Medium: 68x31mm, Large: 68x63mm
Window Colour Red, Yellow, Blue, Green, Amber and White
Illumination Low power super bright white LEDs Low power super bright white LEDs
(replacable LEDs available)
Fault Input Signal Potential free (NO/NC field selectable)
Fault Input Voltage Internal: 12V DC (Potential free) Internal: 12V DC / External: 12V-270V AC/DC
Scan Time 10 msec 100 msec
Flash Rate 1) Fast flash - 0.5 Sec ON / 0.5 Sec OFF (60 flashes/Min)
2) Slow flash - 0.5 Sec ON / 1.5 Sec OFF (30 flashes/Min)
Terminal Pluggable terminal blocks for conductor up to 2.5mm²
Output Relay Contact 4 C/O Relays (2 for grouping + 1 for external hooter + 1 for Ring back sequence)
Relay Contact Rating NO - 5A / NC - 3A @250V AC & NO - 5A / NC - 3A NO - 5A / NC - 3A @ 250V AC & NO - 5A /
@ 30V DC (resistive), (Relay Actuation time NC - 3A @ 30V DC (resistive), (Relay Actuation
10 to 130ms after signal detection) time 130ms after signal detection)
Audible Alarm Output 80 dB at 1 metre distance (In-built configurable Buzzer)
Facia Type Individual window lens, replaceable from front.
Alarm Sequences As per ISA standard (Field configurable)
1) Manual Reset (M-1) 2) Auto Reset (A-1) 3) Ring Back (R-1-12) 4) Auto Reset with No-lock(A-1-4)
5) Manual reset first out with no subsequent alarm flashing and silence push button (F2M-1)
6) Auto reset first out with no subsequent alarm flashing and silence push button (F2A-1)
7) Manual Reset (M-2) [Applicable for Fast Scan Module]
Push Button Controls Integral Push buttons for Test, Mute, Acknowledge and Reset functions.
Provision of output connections for remote access of push buttons.
Communication Port Computer interface with RS 485 Modbus RTU protocol.
Operating Temperature -10oC to +55oC
Storage Temperature -15oC to +60oC
Humidity 95% R.H.
Mounting Type Panel Mounting

Certification RoHS Compliant

Degree of Protection Front panel IP40, Rear panel IP20

EMI / EMC Compl ianc e

Harmonic Current Emissions IEC 61000-3-2 Class A
ESD IEC 61000-4-2 Level II Class A
Radiated Susceptibility IEC 61000-4-3 Level III Class A
Electrical Fast Transient IEC 61000-4-4 Level III (Power Supply and Input Signal with external supply),
IEC 61000-4-4 Level III (Capacitive coupled on Input Signal and Remote keys with internal 12V supply),
IEC 61000-4-4 Level II (Capacitive coupled on Communication)
Surge IEC 61000-4-5 Level IV (Power supply and Input Signal with external supply)
Conducted Susceptibility IEC 61000-4-6 Level III Class A
Voltage Dips and Interruptions(AC) IEC61000-4-11 All VII Level Pass
Conducted Emission CISPR 11 / CISPR 14-1 Class A
Radiated Emission CISPR 11 / CISPR 14-1 Class A
Safet y Compl i ance
Test Voltage Between I/P and O/P IEC 60255-5, 2.5kV, 50Hz, 1Min
Impulse Voltage Between I/P IEC 60255-5, 5kV, 1.2/50us, 0.5J
And O/P
Single Fault Test IEC 61010-1
Insulation Resistance UL 508 > 50 kΩ
Leakage Current UL 508 < 3.5 mA
Pollution Degree ll
Env ir onmental Compli anc e
Cold Heat IEC 60068-2-1
Dry Heat IEC 60068-2-2
Vibration IEC 60068-2-6, 10 to 55Hz

227
Ordering Information

Product No. of Window Keys

Cat. No.
Size Windows Size
AU1D8S 1D 8 Small Small
AU1D6SP 1D 6 Small Big
AD1D8S 1D 8 Small Small
AD1D6SP 1D 6 Small Big
AU2D16S 2D 16 Small Small
AU2D14SP 2D 14 Small Big
AD2D16S 2D 16 Small Small
AD2D14SP 2D 14 Small Big
AU3D24S 3D 24 Small Small
AU3D22SP 3D 22 Small Big
AD3D24S 3D 24 Small Small
AD3D22SP 3D 22 Small Big
AU4D32S 4D 32 Small Small
AU4D30SP 4D 30 Small Big
AD4D32S 4D 32 Small Small
AD4D30SP 4D 30 Small Big

A X XX X X X

A Alarm Annunciator Big push button + Slow Scan time (100ms)

(Fault I/P voltage external 12 to 265VAC/DC
P & 12 VDC Internal) + Non-Replaceable LED
Supply Voltage 90-270 VAC/DC PCB type
U
Big push button + (Fast Scan time 10ms)
D DC Supply Voltage 18-60 VDC P3 (Fault I/P voltage 12V Internal) +
Replaceable LED PCB type
Small push button + (Fast Scan time 10ms)
1D Panel Cutout Size 66 X 138 mm. 03 (Fault I/P voltage 12V Internal) +
Replaceable LED PCB type
2D Panel Cutout Size 138 X 138 mm. Small push button + Slow Scan time (100ms)
(Fault I/P voltage external 12 to 265VAC/DC
3D Panel Cutout Size 210 X 138 mm. Nil & 12 VDC Internal) + Non-Replaceable LED
PCB type
4D Panel Cutout Size 282 X 138 mm.
5D Panel Cutout Size 358 X 138 mm. S Small Window, Size 34(W) x 31(H) mm.
6D Panel Cutout Size 431 X 138 mm. M Medium Window, Size 68(W) x 31(H) mm.

L Large Window, Size 68(W) x 63(H) mm.

Number of Windows
X (minimum 2 and maximum 48 Intermix Window (Combination of Small,
I Medium and Large window size)
windows); X = 2.....48.

Product Ordering code

Note 1 : For other customised products, use live product configurator available on our website to
generate part number & enquiry request form: www.gicindia.com

Note 2 : Legend templates are available on our website : www.gicindia.com

228
 MOUNTING DIMENSIONS (mm)

100 66
72 16 72

1 2

3 4

138
144
144

1D
144

5 6

7 8

Panel cutout

100 138
144
144 16

1 2 9 10

3 4 11 12

138
2D
144
144

5 6 13 14
144

7 8 15 16

Panel cutout

210
100 216
216 16

1 2 9 10 17 18

3 4 11 12 19 20
138

3D
144

144
144

5 6 13 14 21 22

7 8 15 16 23 24

Panel cutout

282
100
288
288 16

1 2 9 10 17 18 25 26

3 4 11 12 19 20 27 28
138

4D
144
144

144

5 6 13 14 21 22 29 30

7 8 15 16 23 24 31 32

Panel cutout

Weight with box (approx.): 1D=580g, 2D=950g, 3D=1320g, 4D=1690g, 5D=2060g, 6D=2430g

229
CONNECTION DIAGRAM

Fast Scan Normal Scan

Base Extension Base Extension
OUTPUT RELAY FAULT INPUT OUTPUT RELAY FAULT INPUT

F9 F9
NO F1 NO F1
P Relay for G2 Alarms.
F2 F10 P Relay for G2 Alarms. F2 F10
It is Fault Follower. It is Fault Follower.
NC F11 NC F11
F3 F3
F12 F12
NO F4 NO F4
P
Relay for G1 Alarms. Up to F13 Relay for G1 Alarms. Up to
F13
It is Fault Follower. F5 Extension 1 P It is Fault Follower. F5 Extension 1
to to
F6 F14 F6 F14
NC Extension 3 NC Extension 3
F15 F15
NO F7 NO F7
Supervisory / Ring F16 Supervisory / Ring F16
P Back Relay
F8 P F8
Back Relay
C FG
NC C NC FG
NO NO
Relay for Hooter. Relay for Hooter.
P It follows internal U/M P It follows internal
buzzer. buzzer.
NC C NC TEST

MANNED /
D+ UNMANNED
RESET
RS-485
D+
D- RS-485 MUTE

D- ACK
GND TEST

RESET
GND C

PUSH BUTTON
MUTE
FOR REMOTE ACCESS
L/+
ACK
L/+ +V
N/-
C
N/- -V
POWER SUPPLY
PUSH BUTTON
FOR REMOTE ACCESS POWER SUPPLY INTERNAL 12V DC, 50 mA

Terminal Connection: For Output Relay, Fault Input, Remote Keys,

Power Supply Connection: AWG 28 to 12, Ph1- 3.5mm, Torque 0.5Nm(4.5lb.in)
For Internal 12V supply, RS485 Connection: AWG 28 to 16, Flat- 2.5mm, Torque 0.2Nm(1.77lb.in)

230