S2 2023 484945 Bibliography

EVALUASI KONDISI GEOLOGI TEKNIK DAN ANALISIS KESTABILAN TEROWONGAN PENGAMBILAN
BENDUNGAN MENINTING
PROVINSI NUSA TENGGARA BARAT
Aditya Rasdi Metly, Ir. I Gde Budi Indrawan, S.T., M.Eng., Ph.D., IPM. ; Hendarto, S.T., M.T., M.D.M., Ph.D.
Universitas Gadjah Mada, 2023 | Diunduh dari http://etd.repository.ugm.ac.id/
DAFTAR PUSTAKA
Arifin, S., 2009. Terowongan Dalam Pelaksanaan. Jakarta: PT. Mediatama

Saptakarya.
ASTM (American Society for Testing and Material) D 5731-02, 2002. Standard
Test Method for Determination of the Point Load Strength Index of Rock :
West Conshohocken, ASTM International
ASTM (American Society for Testing and Material) D 2938-95, 1995. Standard
Test Method for Unconﬁned Compressive Strength of Intact Rock Core
Specimens: West Conshohocken, ASTM International
Barton, N., Lien, R., dan Lunde, J., 1974. Engineering Classification of Rock
Masses for the Design of Tunnel Support. Oslo: Norwegian Geotechnical
Institute Publication 106.
Bieniawski, Z.T., 1989. Engineering Rock Mass Clasifications. John Wiley and
Sons.
Brady, B.H.G., and Brown, E.T., 1972. Rock Mechanics For Underground Mining.
Int. J. Rock Mech. & Min. Sci. 9: 669-667.
Broch, E. dan Franklin, J.A., 1972. The Point-Load Strength Test. International
Journal of Rock Mechanics and Mining Sciences, 9, 669-697
BWS Nusa Tenggara I., 2017. Survei dan Investigasi Kondisi Geologi Bendungan
Meninting. Laporan Pekerjaan. Kementerian Pekerjaan Umum dan
Perumahan Rakyat. (Tidak diterbitkan).
BWS Nusa Tenggara I., 2017. Laporan Utama Sertifikasi Desain Bendungan
Meninting. Laporan Pekerjaan. Kementerian Pekerjaan Umum dan
Perumahan Rakyat. (Tidak diterbitkan).
Ceballos, F., and Jimenez, C.O.R., 2014. Relationship between RMRb and GSI
based on in situ data, ISRM European rock mechanics symposium : Madrid,
EUROCK Vigo 2014.
Das, B.M., 2010. Principal of Geotechnical Engineering – Seventh Edition.
California State University, Sacramento.
Dearman, W.R., 1991. Engineering Geological Mapping, Butterworths Advanced
Series in Geotechnical Engineering. Butterworth-Heinemann, London.
Deere, D., dan Miller, R., 1966. Engineering Classification and Index Properties of
Intact Rock. New Mexico: Technical Report No. AFWL-TR-65-116. Air
Force Weapons Laboratory. Kirkland Air Force Base.
139
BENDUNGAN MENINTING
Dita, S.P., 2020. Karakteristik Geologi Teknik Daerah Konstruksi Bendungan

Meninting, Kabupaten Lombok Barat, Provinsi Nusa Tenggara Barat. Tugas
Akhir. Program Studi Sarjana Teknik Geologi UGM. Yogyakarta.
Fisher R.V., Schmincke H.U., 1984. Pyroclastic Fragments and Deposits. In:
Pyroclastic Rocks. Berlin, Heidelberg: Springer.
HWA-NHI-10-034. (2009). Technical Manual for Design and Construction of
Road Tunnels - Civil Elements. Washington, D.C: U.S Deparment of
Transportation Federal Highway Administration.
Hall, R., dan Wilson, M. (2000). Neogene Sutures in Eastern Indonesia. Journal of
Asian Earth Sciences, 781-808.
Hardiyatmo, H. (2017). Mekanika Tanah 1 Edisi ke Tujuh. Yogyakarta: Gadjah
Mada University Press.
Hoek, E. (1994). Strength of rock and rock masses. ISRM News Journal, 2(2), 16.
Hoek, E., dan Marinos, P. (2000). GSI: A Geologically Friendly Tool For Rock
Mass. Proc. GeoEng2000, 1422-1442.
Hoek, E., Carter, T., dan Diederichs, M. (2013). Quantification of the Geological
Strength Index Chart. US Rock Mechanics /Geomechanics Symposium. San
Francisco: June 23-26, 2013.
Hoek, E.; Carranza-Torres, C.; Corkum, B. (2002). Hoek-Brown failure criterion
2002 Edition. Proc. NARMS-TAC Conference, 1, pp. 267-273. Toronto.
Hoek, E., Kaiser, P.K., Bawden, W.F., 1995. Support of Underground Excavations
in Hard Rock. Balkema, Rotterdam. 215 pp
Hoek, E.; Marinos, P., dan Benissi, M. (1998). Applicability of The Geological
Strength Index (GSI) Classification for Very weak and Sheared Rock Masses.
The Case of The Athens Schist Formation. Bulletin of Engineering Geology
and the Environment, 151-160.
Hudson, J.A, 2012, Design methodology for the safety of underground rock
engineering. Journal of Rock Mechanics and Geotechnical Engineering:
CSRME.
Hunt, Roy E. 2007. A Field for Geotchnical Engineers. CRC Press. London.
IAEG. (1976). Engineering Geological Maps. Paris: The Unesco Press.
ISRM (International Society for Rock Mechanics). 2007. Suggested Methods for
Rock Characterization, Testing and Monitoring: 1974-2006. Int. J. Rock
Mech. Min. Sci. & Geotech.
Japan Society Civil Engineering. 2007. Standard Spesifications for Tunneling-2006
: Mountain Tunnels. Japan.
140
BENDUNGAN MENINTING
Kementerian Pekerjaan Umum dan Perumahan Rakyat. 2015. Surat Edaran Menteri
Pekerjaan Umum dan Perumahan Rakyat No: 30/SE/M/2015 Tanggal 23
April 2015. Pedoman Metode Perencanaan Penggalian dan Sistem
Perkuatan Terowongan Jalan pada Media Campuran Tanah – Batuan.
Jakarta.
Lwin, M. M., 2009. Technical Manual For Design And Construction Of Road
Tunnels-Civil Elements, Chapter 6, 7. USA: Publication No. FHWA-NHI 10-
034 U.S Departement Of Transportation Federal Highway Administration
Mangga, S.A., Atmawinata, S., Hermanto, B., dan Amin, T. C., 2010. Peta Geologi
Regional Lembar Pulau Lombok, Nusa Tenggara Barat Skala 1:250.000.
Bandung, Pusat Penelitian dan Pengembangan Geologi, 1 Lembar.
Marinos, P., dan Hoek, E. (2001). Estimating the geotechnical properties of
heterogeneous rock masses such as flysch. Bulletin of the Engineering
Geology & the Environment (IAEG), 60, 85-92.
Marinos, P., Marinos, V., dan Hoek, E. (2007). The Geological Strength Index
(GSI): A characterization Tool for Assessing Engineering Properties of Rock
Masses. DOI: 10.1201/NOE0415450287.ch2, 87-94.
Norwegian Geotechnical Institute (NGI), 2015 Handbook: Using the Q-system,
Rock Mass Classification and Support Design (Oslo: NGI)
Phanthoudeth, P., Sasaoka, T., Shimada, H., Ulaankhuu, B., Oya, J., Dwiki, S., dan
Karian, T., Numerical Study on Roadway Stability under Weak Geological
Condition of PT Gerbang Daya Mandiri Underground Coal Mine in
Indonesia, GSTF Journal of Geological Sciences (JGS) Vol.3 No.1, 2016.
Pusat Studi Gempa Nasional (Pusgen). 2017. Peta Sumber dan Bahaya Gempa di
Indonesia Tahun 2017. Kementerian Pekerjaan Umum dan Perumahan
Rakyat. Jakarta.
Rahardjo, P. P., 2004. Teknik Terowongan. Bandung: Geotechnical Engineering
Center. Geotechnical Parahyangan University.
Rocscience., 1998. Phase2 User's Guide. Rocscience Inc, Toronto, Ontario,
Canada.
Sheorey, P.R., A Theory for In Situ Stresses in Isotropic and Transversely Isotropic
Rock. Int J Rock Mech Min Sci and Geomech Abstr. 31(1) 1994 p 23-34.
Singh, B. and Goel, R.K, 2011, Engineering Rock Mass Classification : tunneling,
Foundation adn Landslide: USA, Butterworth-Heinemann.
Sivakugan, N., Shukla, S.K. dan Das, B.M., 2013, Rock Mechanics An
Introduction, Florida: CRC Press.
SNI (Standar Nasional Indonesia) 03-2813-1992. Metode Pengujian Geser
Langsung. Jakarta: Badan Standarisasi Nasional.
141
BENDUNGAN MENINTING
SNI (Standar Nasional Indonesia) 03-2825-2008. Cara Uji Kuat Tekan Batu
Uniaksial. Jakarta: Badan Standarisasi Nasional.
SNI (Standar Nasional Indonesia) 3420:2016, Metode Uji Kuat Geser Langsung
Tidak Terkonsolidasi dan Tidak Drainase. Badan Standarisasi Nasional,
Jakarta.
Streckeisen, A.L., 1976, The IUGS Systematic of Igneous Rocks, Journal of The
Geological Society, London.
Suartika, K.P.G., dan Turjono, G., 2009. Peta Kawasan Rawan Bencana
Gempabumi Pulau Lombok, Nusa Tenggara Barat: Departemen Energi dan
Sumber Daya Mineral, Pusat Vulkanologi dan Mitigasi Bencana Geologi,
skala 1:250.000, 1 lembar.
Suhendro, B. (2000). Metode Elemen Hingga dan Aplikasinya. Yogyakarta: Jurusan
Teknik Sipil, Fakultas Teknik, Universitas Gadjah Mada.
Tsiambaos G dan Saroglou H, 2009 Excavability Assessment of Rock Masses Using
the Geological Strength Index (GSI) Bulletin Engineering Geology and
Environment hal. 13-27
van Bemmelen, R.W., 1949. The Geology of Indonesia Vol. I A General Geology
of Indonesia and Adjacent Archiplegoes. The Hague: Government Printing
Office, 10 949.
van Zuidam, R.A., 1983. Guide to Geomorphologic Aerial Photographic
Interpretation and Mapping. ITC, Enscede, Netherland.
Wijaya, B.J.,. 2020. Analisis Kestabilan Terowongan Saluran Pelimpah Pada
Bendungan Meninting, Provinsi Nusa Tenggara Barat. Tugas Akhir.
Program Studi Magister Teknik Geologi UGM. Yogyakarta.
Wiyasri, Y., 2020. Evaluasi Kondisi Geologi Teknik untuk Perencanaan
Terowongan Saluran Pengelak Bendungan Meninting Lombok Barat. Tugas
Akhir. Program Studi Magister Teknik Geologi UGM. Yogyakarta.
Zhang, Q., Zhu, H., Zhang, L., 2013. Modification of Generalized Three-
Dimensional Hoek-Brown Strength Criterion. International Journal of Rock
Mechanics & Mining Sciences 59, hal 80-96.
142

S2 2023 484945 Bibliography

Uploaded by

Copyright:

Available Formats

S2 2023 484945 Bibliography

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

S2 2023 484945 Bibliography

Uploaded by

Copyright:

Available Formats

EVALUASI KONDISI GEOLOGI TEKNIK DAN ANALISIS KESTABILAN TEROWONGAN PENGAMBILAN

Arifin, S., 2009. Terowongan Dalam Pelaksanaan. Jakarta: PT. Mediatama

Dita, S.P., 2020. Karakteristik Geologi Teknik Daerah Konstruksi Bendungan

You might also like