Hollow Spindle Oil Country Lathes

XL 12 B Spindle Bore 315mm DBC 1500, 2000, 3000, 4000, 5000, 6000 mm

Supplied with 3 Jaw self centring chucks

XL 12 B : 500mm Chucks Gripping Range 250-380 mm, 320mm Through Hole
XL 14 B : 660mm Chucks Gripping Range 155-400 mm, 406mm Through Hole
Features
l Spindle Nose DIN 55026 No A 20 l Outboard Steadies provide support &
l Heavy duty & sturdy machine is rated safety for long components
for continuous use and will give longer life l Universal gearbox enables cutting of a large
expectancy. range of metric & imperial Threads without the need of
l Headstock spindle is supported by high changing any individual gears. All this is achieved simply
precision large diameter bearings giving the by shifting the gear Levers.
accuracy & repeatability. l Magnetic Switch provides thermal overload &
l Headstock gears are made of high quality short circuit protection.
alloy steel. These are hardened & precision l Sigma type clutch & electro-dynamic brake for
ground to provide smooth running which controlled operation.
gives a better finish on machined l Safety device to prevent simultaneous engagement
components. Hardness provides wear of Feed & Screw cutting levers which safeguards against
resistance. any damage to the system.
l Gap-Bed: A generous gap bed lets you l Multi start screw cutting facility enables cutting of
swing large components with ease. l Multi Start Threads with ease & precision.
l Hardened & ground “V” guide ways l Foot stop for safety & efficiency.
provide accuracy, rigidity & long working life.
l Large spindle hole is ideal for large diameter
pipe work.

XL 12B / XL 14B 1500 2000 3000 4000 5000 6000

Length (cm) 375 425 525 625 725 825
Width (cm) 165 / 187 165 / 187 165 / 187 165 / 187 165 / 187 165 / 187
Height (cm) 166 / 196 166 / 196 166 / 196 166 / 196 166 / 196 166 / 196
Weight Kg NET 7020 7320 7900 8500 9150 9850

PACKING 1500 2000 3000 4000 5000 6000

DIMENSIONS FOR PACKING WITH 2 OUTBOARD STEADIES:
Width (cm) 160 / 185 160 / 185 160 / 185 160 / 185 160 / 185 160 / 185
Height (cm) 190 / 220 190 / 220 190 / 220 190 / 220 190 / 220 190 / 220
Length (cm) 440 490 ` 590 690 790 890
Weight Kgs 7310 7640 8280 8950 9670 10430

Optional Tooling:
See pages 60- 80

Page 34 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E.
Hollow Spindle Oil Country Lathes
XL 14 B Spindle Bore 358mm DBC 1500, 2000, 3000, 4000, 5000, 6000 mm

Man. Lathes
Specification XL 12 B XL 14 B
Electrical Connection 400V. 3ph.50HZ Machine Stock No.
Height of Centres 400 mm 510 mm
XL 12 B 1500 DBC 1-012-150
Swing Over Bed 800 mm 1020 mm XL 12 B 2000 DBC 1-012-200
Swing Over Cross Slide 560 mm 780 mm XL 12 B 3000 DBC 1-012-300
Swing in Gap 990 mm 1210 mm XL 12 B 4000 DBC 1-012-400
XL 12 B 5000 DBC 1-012-500
Distance Between Centres 1500, 2000, 3000, 4000, 5000, 6000 mm XL 12 B 6000 DBC 1-012-600
Travelling Steady 20 - 200 mm
Fixed Steady-Small 20 - 200 mm XL 14 B 1500 DBC 1-014-150
Fixed Steady - Large 180 - 430 mm
XL 14 B 2000 DBC 1-014-200
XL 14 B 3000 DBC 1-014-300
Width of Bed 560 mm XL 14 B 4000 DBC 1-014-400
Spindle Nose Din 55026 No A 20 XL 14 B 5000 DBC 1-014-500
Spindle Bore 315 mm 358 mm XL 14 B 6000 DBC 1-014-600
Spindle Taper No 318 Metric
Diameter of Front Bearing 380 mm Included as standard:
Number of Spindle Speeds 12 l Two Steadies 20-200 & 180-430mm Cap.
l 3 Jaw Self Centring Chucks (2pcs)
Spindle Speeds 8 - 400 6.3 - 315
320mm Bore, 500mm Diameter for XL12B
Main Spindle Motor 11Kw (option 15 Kw) Gripping Range 250-380mm
Coolant Motor 100W 406mm Bore, 660mm Diameter for XL14B
Number of Feeds 152 Gripping Range 155-400mm
Longitudinal Feed Range 0.039 - 15 mm/rev l Coolant l Lo Volt Machine Lamp
Cross Feed Range mm/rev 0.02 - 7.5 l Taper Turning Attachment
Longitudinal Rapid Traverse 3800 mm/min l Instruction Manual & Parts List
l Outboard Steadies 120-320mm (2pcs) XL 12 B
Cross Rapid Traverse 1900 mm/min
160-360mm (2pcs) XL 14 B
Number of Threads 76 each type 64 each type
Metric Thread Range 0.5 - 150 mm Optional Accessories
Inch Thread Range 60 - 1/5 tpi
4 Jaw Independent Chucks instead of
Module Thread Range 0.125 - 37.5 Module
3 Jaw XL 12 B 630mm OD , Gripping range
DP Thread Range 240 - 4/5 DP
100 - 630mm, Through Hole 320mm 1-012-900
Cross Slide Travel 410 mm 510 mm
Top Slide Travel 150 mm 280 mm 4 Jaw Independent Chucks instead of
Quill Diameter 105 mm 3 Jaw XL 14 B 800mm OD , Gripping range
Quill Taper 6 MT 155 - 800mm, Through Hole 370mm 1-014-900
Quill Travel 225
Tool Shank 32 mm XL 4 QCTP 1-190-800

WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. Page 35
 XL Heavy Duty Precision Lathes
XL 35 M/VS XL 43 M/VS XL 50 M/VS
35” Swing, 43” Swing 50” Swing
Features
l Spindle nose DIN 55027 C15 l 700mm Bed Width. l Heavy duty & sturdy Machine is rated for continuous
use & will give longer life expectancy. l Headstock Spindle is supported by high precision large diameter
Bearings giving the accuracy & repeatability. l Headstock gears are made of high quality alloy steel.
These are hardened & precision ground to provide smooth running which gives a better finish on machined
components. Hardness provides wear resistance. l Gap-bed: A generous gap bed lets you swing large
components with ease. l Hardened & ground “V” Guide Ways provide accuracy, rigidity & long working life.
l Large spindle hole of 155 mm increases the capacity & efficiency of large bar work.
l Motorised tailstock: the tailstock moves at the touch of a button to allow fast, easier set-up.
l Powered compound slide enables tapers to be turned with ease.
l Universal gearbox enables cutting of a large range of metric & imperial threads without the need of changing
any individual gears. All this is achieved simply by shifting the gear levers. l Magnetic switch provides thermal
overload & short circuit protection. l Sigma type clutch & electro-dynamic brake for controlled operation.
l Safety device to prevent simultaneous engagement of feed & screw cutting levers which safeguards against
any damage to the system. l Multi start screw cutting facility enables cutting of multi start threads with ease
& precision. l Foot stop for safety & efficiency.

Dimensions & Weights XL 35 XL 43 XL 50 Machine Stock No

Width (cm) 180 180 190
Height (cm) 176 186 198 XL 35M 1500 mm DBC 1-025-150M
XL 35M 3000 mm DBC 1-025-300M

1500 mm DBC Overall XL35M
Length XL43M
370 cm XL50M
XL 35M 4000 mm DBC 1-025-400M
3000 mm DBC 520 cm XL 35M 5000 mm DBC 1-025-500M
4000 mm DBC 620 cm
XL 35M 6000 mm DBC 1-025-600M
5000 mm DBC 720 cm
6000 mm DBC 820 cm
XL 35VS 7000 mm DBC 1-025-700VS
7000 mm DBC 920 cm
8000 mm DBC 1020 cm XL 35VS 8000 mm DBC 1-025-800VS
9000 mm DBC 1120 cm XL 35VS 9000 mm DBC 1-025-900VS
10000 mm DBC 1220 cm XL 35VS 10000 mm DBC 1-025-1000VS

1500 mm DBC Weight 6600 7400 XL 43M

7850 1500 mm DBC 1-020-150M
3000 mm DBC (Net)Kg 8100 8900 9350 XL 43M 3000 mm DBC 1-020-300M
4000 mm DBC 9100 9900 10350 XL 43M 4000 mm DBC 1-020-400M
5000 mm DBC 10600 11400 11850 XL 43M 5000 mm DBC 1-020-500M
6000 mm DBC 11600 12400 12850
XL 43M 6000 mm DBC 1-020-600M
7000 mm DBC 12600 13400 13850
8000 mm DBC 13600 14400 14850
XL 43VS 7000 mm DBC 1-020-700VS
9000 mm DBC 14600 15400 15850
10000 mm DBC 15600 16400 16850 XL 43VS 8000 mm DBC 1-020-800VS
XL 43VS 9000 mm DBC 1-020-900VS
XL 43VS 10000 mm DBC 1-020-1000VS

XL 50M 1500 mm DBC 1-015-150M

XL 50M 3000 mm DBC 1-015-300M
XL 50M 4000 mm DBC 1-015-400M
XL 50M 5000 mm DBC 1-015-500M
XL 50M 6000 mm DBC 1-015-600M

XL 50VS 7000 mm DBC 1-015-700VS

XL 50VS 8000 mm DBC 1-015-800VS
XL 50VS 9000 mm DBC 1-015-900VS
XL 50VS 10000 mm DBC 1-015-1000VS

Included as Standard
l Power Rapid in Long & Cross Feed l Coolant System l Travel Steady 80-300mm
l Lo Volt Machine Light l Fixed Steady 50-300mm l Powered Compound Slide

l 500mm 3 Jaw Self Centring Chuck with Back Plate

Page 36 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E.
 Between Centres
XL 35M, XL 43M, XL 50M 1500, 3000, 4000, 500 OR 6000mm
XL 35VS, XL 43VS, XL 50VS 7000, 8000, 9000 or 10,000 mm

Man. Lathes
Specification XL 35 XL 43 XL 50
Electrical Connection 400V. 3ph.50HZ
Between Centres (mm) M 1500, 3000, 4000, 5000, 6000
VS 7000, 8000, 9000, 10000
Height of Centres 400 mm 500 mm 625 mm
Swing Over Bed 890 mm 1090 mm 1320 mm
Swing Over Cross Slide 490 mm 690 mm 940 mm
Swing Over Gap 1050 mm 1250mm 1500 mm
Width of Bed 700 mm
Hole Through Spindle 155 mm
Spindle Nose Camlock DIN 55027 C15
Spindle Speeds (Geared head) 24
Range of Spindle Speeds 5 - 1000 rpm
Number of Speed Steps for 4
Variable Speeds 3.7 - 15.6, 14.7 - 62, 58 - 250, 235 - 1000
Variable Speed Range Optional Accessories
Travel of Cross Slide 525 mm 525 mm 685 mm
ITEM Stock No.
Travel of Compound Slide 270 mm
270 - 520mm Fixed Steady for XL 35M 1-025-900
Tailstock Quill Dia / Travel Ø125 / 260 mm
270 - 520mm Fixed Steady for XL 43M 1-020-900
Taper of Tailstock Quill 6 MT 470 - 720mm Fixed Steady for XL 43M 1-020-901
No. of Threads 80 each type 270 - 520mm Fixed Steady for XL50M 1-015-900
Range of Threads : 470 - 720mm Fixed Steady for XL 50M 1-015-901
Metric 0.5 - 480 mm 700 - 950mm Fixed Steady for XL 50M 1-015-902
Inch 60 - 1/16 TPI Soft Jaws for 500mm Chuck 4-242-500
Module 0.125 - 120 Taper Turning Attachment 1-020-950
DP 240 - 1/4
760mm Dia Face Plate C15 XL 35M 1-025-911
No. of Feeds 160
1000mm Dia Face Plate C15 XL 43/50M 1-020-910
Range of Longitudinal Feeds 0.032 / 38.9 mm/rev
630mm Dia 4 Jaw Chuck C15 XL 35M 4-263-635
Range of Cross Feeds 0.016 / 19.45 mm/rev
800mm Dia 4 Jaw Chuck C15 XL 35/43/50M 4-263-815
Maximum Tool Shank 32 mm
Main Motor 30 kW (40HP) 1000mm Din 15 4 Jaw Chuck XL 43M/50M 1-020-920
Coolant Motor 100W Multifix D2 QCTP 1-193-600

WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. Page 37
 Heavy Duty Precision Lathes
XL 630 630mm Swing XL 730 730mm Swing

Features

l Spindle nose DIN 55027 C11 l Heavy duty & sturdy machine rated for continuous use and
longer life expectancy. l Headstock spindle supported by high precision large diameter bearings
giving accuracy & repeatability. l Headstock gears are made of high quality alloy steel.
These are hardened & precision ground to provide smooth running & wear resistance.
l A generous gap bed lets you swing large components with ease.
l Hardened & ground “V” guide ways provide accuracy, rigidity and long working life.
l Large spindle hole increases the capacity & efficiency of large bar work.
l Universal gearbox enables cutting of a large range of metric & imperial threads
without the need to change individual gears. l Magnetic switch provides thermal
overload and short circuit protection.
l Sigma type clutch & electro-dynamic brake for controlled operation.
l Safety device to prevent simultaneous engagement of feed & Screw cutting levers which
safeguards against any damage to system.
l Multi start screw cutting facility enabling cutting of multi start threads with ease & precision.
l Foot stop for safety & efficiency

Specification XL 630 XL 730 Machine Stock No

Electrical Connection 400V. 3ph.50HZ
XL 630 1000 mm DBC 1-049-100
Distance Between Centres 1000, 1500, 2000, 4000, 5000 mm
XL 630 1500 mm DBC 1-049-150
Height of Centres 315 mm 365 mm
XL 630 2000 mm DBC 1-049-200
Swing Over Bed 630 mm 730 mm
Swing Over Cross Slides 430 mm 500 mm XL 630 3000 mm DBC 1-049-300
Swing Over Gap 830 mm 930 mm XL 630 4000 mm DBC 1-049-400
Width of Bed 400 mm XL 630 5000 mm DBC 1-049-500
Hole Through Spindle 103 mm
Spindle Nose DIN 55027 C11 XL 730 1000 mm DBC 1-048-100
No of Spindle Speeds 21
XL 730 1500 mm DBC 1-048-150
Range of Spindle Speeds 12.5 - 1250 rpm
XL 730 2000 mm DBC 1-048-200
Travel of Cross Slides 315 mm 390 mm
XL 730 3000 mm DBC 1-048-300
Travel of Compound Slide 130 mm
Tailstock Quill Dia./Travel Ø75 / 230 mm XL 730 4000 mm DBC 1-048-400
Taper of Tailstock Quill 5 MT XL 730 5000 mm DBC 1-048-500
Number of Threads 64 each type
Range of Threads:
Metric 0.5 - 120 mm Included as Standard
Inch 60 - 1/4 TPI
Module 0.125 - 30 l Power Rapid in Longitudinal
DP 240 - 1 & Cross Feed
Number of Feeds 120 l Travelling Steady 15 - 200mm
Range of Longitudinal Feeds 0.04 - 12 mm/rev l Fixed Steady 15 - 200mm
Range of Cross Feeds 0.02 - 6 mm/rev
l Coolant System
Main Spindle Motor 11 kW (15HP)
Coolant Motor 100W l Lo Volt Machine Light
Maximum Tool Shank 25mm l 315mm 3 Jaw Self Centring Chuck

Page 38 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E.
 Distance Between Centres
1000mm, 1500mm, 2000mm, 3000mm, 4000mm, 5000mm

Man. Lathes
XL 35 43 50 630 730 440 500 & 580 Feed Box XL 35 43 50 630 730 440 500 & 580 Carriage Box

Dims & Weights

XL 630 XL 730 Optional Accessories: Stock No.
Width (cm) 125 130 180-340 mm Fixed Steady for XL630 1-049-900
Height (cm) 150 155
180-430 mm Fixed Steady for XL730 1-048-900
600 mm Face Plate C11 1-048-910
1000 mm DBC Overall Length 260 cm 500 mm 4Jaw Chuck C11 4-263-511
1500 mm DBC 310 cm 600 mm 4 Jaw Ind. Chuck C11 1-048-920
2000 mm DBC 360 cm
3000 mm DBC 460 cm 630 mm 4Jaw Chuck C11 4-263-631
4000 mm DBC 560 cm Taper Turning Attachment 1-048-930
5000 mm DBC 660 cm Soft Jaws for 315 mm Chuck 4-242-315
XL3 QCTP 1-190-600
1000 mm DBC Weight 3100 Kg 3210 Kg
1500 mm DBC (Net) 3250 Kg 3360 Kg
2000 mm DBC 3470 Kg 3580 Kg Optional Tooling:
3000 mm DBC 3820 Kg 3930 Kg
4000 mm DBC 4180 Kg 4290 Kg
5000 mm DBC 4550 Kg 4660 Kg See pages 60 - 80

WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. Page 39
 Heavy Duty Precision Lathes
XL 440 XL 500 XL 580

Specification XL 440 XL 500 XL 580

Electrical Connection 400V. 3ph.50HZ

Between Centres (mm) 1000, 1500, 2000, 3000, 4000, 5000

Height of Centres 220 mm 250 mm 290 mm

Swing Over Bed 440 mm 500 mm 580 mm

Swing Over Cross Slide 240 mm 300 mm 380 mm

Swing Over Gap 640 mm 700mm 780 mm

Width of Bed 400 mm
Hole Through Spindle 72 mm
Spindle Nose Camlock DIN 55027 C8
No. of Spindle Speeds 21
Range of Spindle Speeds 20 - 2000 rpm
Machine Stock No
Travel of Cross Slide 315 mm
XL 440 1000 mm DBC 1-070-100
Travel of Compound Slide 130 mm
XL 440 1500 mm DBC 1-070-150
Tailstock Quill Dia./Travel Ø75 / 230 mm XL 440 2000 mm DBC 1-070-200
XL 440 3000 mm DBC 1-070-300
Taper of Tailstock Quill 5 MT
XL 440 4000 mm DBC 1-070-400
No. of Threads 64 each type XL 440 5000 mm DBC 1-070-500
Range of Threads :
Metric 0.5 - 120 mm XL 500 1000 mm DBC 1-060-100
XL 500 1500 mm DBC 1-060-150
Inch 60 - 1/4
XL 500 2000 mm DBC 1-060-200
Module 0.125 - 30
XL 500 3000 mm DBC 1-060-300
DP 240 - 1 XL 500 4000 mm DBC 1-060-400
No. of Feeds 120 XL 500 5000 mm DBC 1-060-500
Range of Longitudinal Feeds 0.04 - 12
XL 580 1000 mm DBC 1-050-100
Range of Cross Feeds 0.02 - 6
XL 580 1500 mm DBC 1-050-150
Maximum Tool Shank 25 mm XL 580 2000 mm DBC 1-050-200
Main Spindle Motor 11 kW (15HP) XL 580 3000 mm DBC 1-050-300
XL 580 4000 mm DBC 1-050-400
Coolant Motor 100W
XL 580 5000 mm DBC 1-050-500

Page 40 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E.
 XL 440 440mm, swing All models between centres
XL 500 500mm, swing 1000, 1500, 2000, 3000, 4000 or 5000mm
XL 580 580mm, swing

Features:
l Spindle nose DIN 55027 C8 l Heavy duty & sturdy machine rated for continuous
use & longer life expectancy l Headstock spindle supported by high precision large
diameter bearings giving accuracy & repeatability. l Headstock gears are made of high
quality alloy steel. These are hardened & precision ground to provide smooth
running & wear resistance. l A generous gap bed lets you swing large components with ease.
l Hardened & ground “V” guide ways provide accuracy, rigidity & long working life.
l Large spindle hole increases the capacity &

Man. Lathes
efficiency of large bar work. l Universal gearbox enables cutting of a large range of
metric & imperial Threads without the need to change individual gears.
l Magnetic switch provides thermal overload & short circuit protection.
l Sigma type clutch & electrodynamic brake for controlled operation.
l Safety device to prevent simultaneous engagement of feed & screw cutting
levers which safeguards against any damage to system. l Multi-start screw cutting facility enabling
cutting of multi-start threads with ease & precision. l Foot Stop for safety & efficiency

XL 35 43 50 630 730 440 500 & 580 Feed Box Included as Standard
l Power Rapid in Long. & Cross Feed
l Travelling Steady
l Fixed Steady 15 - 160mm
for XL 440/500 & 15 - 200mm
for XL 580
l Coolant System l Lo Volt Machine Light
l 250 mm 3 Jaw Self Centring Chuck

Dims & Weights

XL 440 XL 500 XL 580 Optional Accessories: Stock No.
Width (cm) 125 125 125
400mm Face Plate XL 440 1-070-900
Height (cm) 140 143 147
480mm Face Plate XL 500/580 1-060-900
140-280mm Fixed Steady XL 500 1-060-910
1000 mm DBC Overall Length 260 cm 180-340mm Fixed Steady XL 580 1-050-910
1500 mm DBC 310 cm 400mm 4 Jaw Chuck C8 XL 440 4-263-408
2000 mm DBC 360 cm 500mm 4 Jaw Chuck C8 XL 500/580 4-263-508
3000 mm DBC 460 cm Taper Turning Attachment 1-070-950
4000 mm DBC 560 cm Soft Jaws for 250mm Chuck 4-242-250
5000 mm DBC 660 cm XL3 QCTP 1-190-600

1000 mm DBC Weight 2670 Kg 2750 Kg 2820 Kg

1500 mm DBC (Net) 2820 Kg 2900 Kg 2970 Kg Optional Tooling:
2000 mm DBC 3040 Kg 3120 Kg 3190 Kg
3000 mm DBC 3390 Kg 3470 Kg 3540 Kg
4000 mm DBC 3750 Kg 3830 Kg 3900 Kg See pages 60 - 80
5000 mm DBC 4120 Kg 4200 Kg 4270 Kg

WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. Page 41
 Heavy Duty Precision Lathes
TH 8020D 0346-2230 TH 8030D 0346-2240

Features:
l Hardened & ground guideways l Spindle is supported by adjustable precision taper roller bearings
l Manufactured to DIN 8606 tool makers precision l Sealed Gearbox l Machine Light
l Guaranteed concentricity of spindle nose better than 0.015 mm l DC 24 Volt electric panel.
l Removable gap bed l Coolant system l Toolpost guard l Footbrake
l Emergency foot Brake l Chucks & Chuck Guards l Constant lubrication to headstock gears
l User friendly DR0 8 digits display, sealed & dazzle free

Included as Standard Specification TH 8020D TH 8030D

Electrical Connection 400V. 3ph.50HZ
l 315mm 3 Jaw Chuck Distance Between Centres 2050 mm 3050 mm
l 400mm 4 Jaw Chuck Height of Centres 400 mm
l 480mm Face Plate Swing Over Bed 800 mm
l 20 - 190 mm Fixed Steady Swing Over Cross Slides 570 mm
Swing Over Gap 1035 mm
l 20 - 130 mm Travelling Steady
Length of Gap 250 mm
l Coolant System
Width of Bed 400 mm
l Rear Splash Guard Hole Through Spindle 105 mm
l Toolpost Chip Guard Spindle Nose Camlock DIN ISO 702-2 No 8
l Spindle Footbrake No of Spindle Speeds 16
l 2 Axis DRO Range of Spindle Speeds 25 - 1600 rpm
Travel of Cross Slides 368 mm
l Electrically Interlocked Chip Guard
Travel of Compound Slide 230 mm
l Cross & Longitudinal Power Feed
Tailstock Quill Dia./Travel Ø90 mm / 235 mm
l Machine Lamp
Taper of Tailstock Quill 5MT
Range of Threads:
Optional Accessories: Metric (54 pitches) 0.45 - 120 mm
Inch (60 pitches) 80 - 7/16 TPI
Taper Turning Attachment 0344-0960
Module (46 pitches) 0.25 - 60 mm
Soft Jaws for 315mm 3 Jaw Chuck 4-241-315
DP (42 pitches) 7/8 - 160
190 - 380mm Fixed Steady 0344-4140
Range of Longitudinal Feeds 0.044 - 1.48 mm/rev(25)
XL 4 QCTP 1-190-800
Range of Cross Feeds 0.022 - 0.74 mm/rev(25)
Motor 11 kW
Rapid Traverse Motor 0.55 kW
Optional Tooling:
Coolant Pump Motor 0.15 kW
Max Tool Shank 32 mm
See pages 60 - 80 Dims LxWxH(cm) 429 x 153 x 193 529 x 153 x 193
Weight Kg 3455 3820

Page 42 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E.
Heavy Duty Precision Lathes
TH 6620D 0346-2210 TH 6630D 0346-2220

Man. Lathes
Features:
l Hardened & ground guideways l Spindle is supported by adjustable precision taper roller bearings
l Manufactured to DIN 8606 tool makers precision l Sealed Gearbox l Machine Light
l Guaranteed concentricity of spindle nose better than 0.015 mm l DC 24 Volt electric panel.
l Removable gap bed l Coolant system l Toolpost guard l Footbrake
l Emergency foot Brake l Chucks & Chuck Guards l Constant lubrication to headstock gears
l User friendly DR0 8 digits display, sealed & dazzle free

Included as Standard Specification TH 6620D TH6630D

Electrical Connection 400V. 3ph.50HZ
l 315mm 3 Jaw Chuck Distance Between Centres 2050 mm 3050 mm
l 400mm 4 Jaw Chuck Height of Centres 330 mm
l 480mm Face Plate Swing Over Bed 660 mm

l 20 - 190mm Fixed Steady Swing Over Cross Slides 440 mm

Swing Over Gap 900 mm
l 20 - 130mm Travelling Steady
Length of Gap 250 mm
l Coolant System
Width of Bed 400 mm
l Rear Splash Guard Hole Through Spindle 105 mm
l Toolpost Chip Guard Spindle Nose Camlock DIN ISO 702-2 No 8
l Spindle Footbrake No of Spindle Speeds 16
l 2 Axis DRO Range of Spindle Speeds 25 - 1600 rpm
Travel of Cross Slides 368 mm
l Electrically Interlocked Chip Guard
Travel of Compound Slide 230 mm
l Cross & Longitudinal Power Feed
Tailstock Quill Dia./Travel Ø90 mm / 235 mm
l Machine Lamp Taper of Tailstock Quill 5MT
Range of Threads:
Optional Accessories: Metric (54 pitches) 0.45 - 120 mm
Inch (60 pitches) 80 - 7/16 TPI
Taper Turning Attachment 0344-0958
Module (46 pitches) 0.25 - 60 mm
Soft Jaws for 315mm 3 Jaw Chuck 4-241-315
DP (42 pitches) 7/8 - 160
190 - 380mm Fixed Steady 0344-4137
Range of Longitudinal Feeds 0.044 - 1.48 mm/rev(25)
XL 4 QCTP 1-190-800 Range of Cross Feeds 0.022 - 0.74 mm/rev(25)
Motor 9 kW
Rapid Traverse Motor 0.55 kW
Optional Tooling:
Coolant Pump Motor 0.15 kW
Max Tool Shank 25 mm
See pages 60 - 80 Dims LxWxH(cm) 365 x 150 x 179 465 x 150 x 179
Weight Kg 3345 3730

WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. Page 43
 Heavy Duty Precision Lathes
TX 5216 0343-2440 TX 6222 0343-2460

Features:
l Machine bed & chassis are made of heavily ribbed cast material
l High degrees of rigidity of the spindle bar housing thanks to pronounced ribbing made of 25GG cast material
l All feed gearwheels made of steel, hardened and polished l Newall Digital position display DP700
l Spindle shafts on needle bearings, all components lubricated in oil bath
l Hardened and polished spindle guarantees high degrees of accuracy and durability
l Hardened and polished bed guides l Electronically braked main spindle
l Electronic feed shut-off of Z axis l External coolant tank with filling level display & oil separator
l Complete feed and lead spindle cover l Electrical position shut-off with quadruple positioning stop

Included as Standard Specification TX 5216 TX6222

l 315mm 3 Jaw Self centring chuck D1-8 Electrical Connection 400V. 3ph.50HZ
l Quick change toolpost SWH 7-C Distance Between Centres 1,600 mm 2,220 mm
Height of Centres 260 mm 310 mm
l One Toolholder 32x130mm type D
Swing Over Bed 520 mm 620 mm
for 25mm square tools
Swing Over Cross Slides 324 mm 424 mm
Width of Bed 350 mm
Optional Accessories:
Hole Through Spindle Ø80 mm Ø105 mm
450mm Face Plate D1-8 0344-2982 Spindle Nose Camlock DIN ISO 702 - 2 No 8

400mm 4 Jaw Chuck D1-8 0344-2890 No of Spindle Speeds 12

Range of Spindle Speeds 30 - 1,500 rpm 40 - 1,650 rpm
Set of Soft Jaws for 315 3 Jaw Chuck 4-241-315
Travel of Cross Slides 350 mm
Spare Toolholder 32x130 Type D 0338-4308
Travel of Compound Slide 170 mm
Spare Toolholder 40x160 Type H 0338-4326
Tailstock Quill Dia./Travel Ø72 mm / 180 mm
Steadies TX 5216
Taper of Tailstock Quill 5MT
Travelling steady 15 - 125mm 0343-8020
Range of Threads:
Fixed steady 10 - 185 mm 0343-8023 Metric (55 pitches) 0.5 - 15 mm
Fixed steady 160-285 mm 0343-8024 Inch (55 pitches) 60 - 2 TPI
Steadies TX 6222 Module (55 pitches) 0.25 - 7.5 mm
Travelling steady 15 - 125mm 0343-8030 DP (42 pitches) 7/8 - 160
Fixed steady 10 - 185 mm 0343-8033 Range of Longitudinal Feeds 0.05 - 1.5 mm/rev(55)
Fixed steady 160 - 285 mm 0343-8034 Range of Cross Feeds 0.025 - 0.75 mm/rev(55)
Motor 5.5 kW 7.5 kW
Coolant Pump Motor 100 W
Optional Tooling: Max Tool Shank 25 mm
Dims LxWxH(cm) 300 x 120 x 186 360 x 120 x 186
See pages 60 - 80 Weight Kg 2470 2800

Page 44 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E.
Heavy Duty Precision Lathe
TX 5216V 0343-2445 Variable Speed
NEW

Man. Lathes
Features:
l Machine bed & chassis are made of heavily ribbed cast material
l High degrees of rigidity of the spindle bar housing thanks to pronounced ribbing made of 25GG cast material
l All feed gearwheels made of steel, hardened and polished l Newall Digital position display DP700
l Spindle shafts on needle bearings, all components lubricated in oil bath
l Hardened and polished spindle guarantees
high degrees of accuracy and durability Specification TX 5216V
l Hardened and polished bed guides Electrical Connection 400V. 3ph.50HZ
l Electronically braked main spindle Distance Between Centres 1,600 mm
l Electronic feed shut-off of Z axis
Height of Centres 260 mm
l External coolant tank with filling
Swing Over Bed 520 mm
level display &
Swing Over Cross Slides 324 mm
Width of Bed 350 mm
Included as Standard
Hole Through Spindle Ø80 mm
l 315mm 3 Jaw Self centring chuck D1-8
Spindle Nose Camlock DIN ISO 702 - 2 No 8
l Quick change toolpost SWH 7-C No of Spindle Speeds 2 x 3 steps vario
l One Toolholder 32x130mm type D Range of Spindle Speeds 12 - 1,800 rpm
for 25mm square tools Travel of Cross Slides 350 mm
Travel of Compound Slide 170 mm
Optional Accessories: Tailstock Quill Dia./Travel Ø72 mm / 180 mm
Taper of Tailstock Quill 5MT
450mm Face Plate D1-8 0344-2982
Range of Threads:
400mm 4 JaW Chuck D1-8 0344-2890
Metric (55 pitches) 0.5 - 15 mm
Set of Soft Jaws for 315mm Chuck 4-241-315
Inch (55 pitches) 60 - 2 TPI
Spare Toolholder 32x130 Type D 0338-4308 Module (55 pitches) 0.25 - 7.5 mm
Spare Toolholder 40x160 Type H 0338-4326 DP (42 pitches) 7/8 - 160
Travelling steady 15 - 125mm 0343-8020 Range of Longitudinal Feeds 0.05 - 1.5 mm/rev(55)
Fixed steady 10 - 185 mm 0343-8023 Range of Cross Feeds 0.025 - 0.75 mm/rev(55)
Fixed steady 160-285 mm 0343-8024 Motor 5.5 kW
Coolant Pump Motor 100 W
Optional Tooling: Max Tool Shank 25 mm
Dims LxWxH(cm) 302 x 127 x 222
See pages 60 - 80 Weight Kg 2470

WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. Page 45
 Heavy Duty Precision Lathes
TH 5615D TH 5620D TH 5630D
0346-2160 0346-2170 0346-2180

Features:
l Hardened & ground guideways l Spindle is supported by adjustable precision taper roller bearings
l Manufactured to DIN 8606 tool makers precision l Sealed Gearbox l Machine Light
l Guaranteed concentricity of spindle nose better than 0.015 mm l DC 24 Volt electric panel.
l Removable gap bed l Coolant system l Toolpost guard l Footbrake
l Emergency foot Brake l Chucks & Chuck Guards l Constant lubrication to headstock gears
l User friendly DR0 8 digits display, sealed & dazzle free

Specification TH 5615D TH 5620D TH 5630D

Included as Standard
Electrical Connection 400V. 3ph.50HZ
l 315mm 3 Jaw Chuck Dist Between Centres 1420 mm 1910 mm 2910 mm
l 400mm 4 Jaw Chuck Height of Centres 280 mm
l 480mm Face Plate Swing Over Bed 560 mm

l 20 - 165mm Fixed Steady Swing Over Cross Slides 355 mm

Swing Over Gap 790 mm
l 20 - 95mm Travelling Steady
Length of Gap 170 mm
l Coolant System
Width of Bed 350 mm
l Rear Splash Guard Hole Through Spindle 80 mm
l Toolpost Chip Guard Spindle Nose Camlock DIN ISO 702 - 2 D1 - 8
l Spindle Footbrake No of Spindle Speeds 12
l 2 Axis DRO l Machine Lamp Range of Spindle Speeds 25 - 1600 rpm
Travel of Cross Slides 316 mm
l Elec Interlocked Chip Guard
Travel of Compound Slide 130 mm
l Cross & Longitudinal
Tailstock Quill Dia./Travel Ø75 mm / 180 mm
Power Feed Taper of Tailstock Quill 5MT

Optional Accessories: Range of Threads:

Metric (47 pitches) 0.2 - 14 mm
Taper Turning Attachment 0344-0956
Inch (60 pitches) 2 - 112 TPI
Soft Jaws for
Module (34 pitches) 0.1 - 7 MP
315mm 3 Jaw Chuck 4-241-315
DP (50 pitches) 4 - 112
165-350mm Fixed Steady 0344-4134
Range of Longitudinal Feeds 0.059 - 1.646 mm/rev(35)
XL 3 QCTP 1-190-600 Range of Cross Feeds 0.020 - 0.573 mm/rev(35)
Motor 7.5 kW
Optional Tooling: Coolant Pump Motor 125 W
Max Tool Shank 25 mm
See pages 60 - 80 Dims LxWxH(cm) 295 x 115 x 165 345 x 115 x 165 445 x 115 x
Weight Kg 2,300 2,720 3,000

Page 46 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E.
 Heavy Duty Precision Lathes
TH 4610D TH 4615D TH 4620D
0346-2110 0346-2120 0346-2130

Man. Lathes
Features:
l Hardened & ground guideways l Spindle is supported by adjustable precision taper roller bearings
l Manufactured to DIN 8606 tool makers precision l Sealed Gearbox l Machine Light
l Guaranteed concentricity of spindle nose better than 0.015 mm l DC 24 Volt electric panel.
l Removable gap bed l Coolant system l Toolpost guard l Footbrake
l Emergency foot Brake l Chucks & Chuck Guards l Constant lubrication to headstock gears
l User friendly DR0 8 digits display, sealed & dazzle free

Included as Standard Specification TH 4610D TH 4615D TH 4620D

l 250mm 3 Jaw Chuck Electrical Connection 400V. 3ph.50HZ
l 250mm 4 Jaw Chuck Distance Between Centres 1060 mm 1560 mm 2060 mm
l 380mm Face Plate Height of Centres 230 mm
l 25- 175mm Fixed Steady Swing Over Bed 460 mm
l 20 - 115mm Travelling Steady Swing Over Cross Slides 270 mm
l Coolant System
Swing Over Gap 690 mm
l Rear Splash Guard
Length of Gap 240mm
l Machine Lamp
l Threading Gauge Width of Bed 300 mm
l Spindle Footbrake Hole Through Spindle 58 mm
l Elec. Interlocked Chuck Guard Spindle Nose Camlock DIN ISO 702-2 No 6
l Toolpost Chip Guard No of Spindle Speeds 12
l 2 Axis DRO Range of Spindle Speeds 25 - 2000 rpm
Travel of Cross Slides 285 mm
Optional Accessories: Travel of Compound Slide 125 mm
Taper Turning Attachment 0344-0946 Tailstock Quill Dia./Travel Ø60 mm / 130 mm
Taper of Tailstock Quill 4MT
Soft Jaws for
Range of Threads:
250mm 3 Jaw Chuck 4-241-250
Metric (41 pitches) 0.1- 14 mm
70-270mm Fixed Steady 0344-4132 Inch (41 pitches) 112- 2 TPI
XL 2T QCTP 1-190-500 Module (34 pitches) 0.1 - 7 mm/Rev

5C Collet Chuck DP (50 pitches) 4 - 112

Range of Longitudinal Feeds 0.031 - 1.7 mm/rev(42)
Key Operated D1-6 0344-1556
Range of Cross Feeds 0.014 - 0.784 mm/rev(42)
Motor 5.5 kW
Optional Tooling: Coolant Pump Motor 125 W
Max Tool Shank 25 mm
See pages 60 - 80 Dims LxWxH(cm) 222 x 107 x 155 277 x 107 x 155 327 x 107 x 155
Weight Kg 1720 1977 2400

WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. Page 47
Heavy Duty Precision Lathe
TX 4414 0343-2420

NEW

Features:
l Machine bed & chassis are made of heavily ribbed cast material
l High degrees of rigidity of the spindle bar housing thanks to pronounced ribbing made of 25GG cast material
l All feed gearwheels made of steel, hardened and polished l Newall Digital position display DP700
l Spindle shafts on needle bearings, all components lubricated in oil bath
l Hardened and polished spindle guarantees
high degrees of accuracy and durability Specification TX 4414
l Hardened and polished bed guides Electrical Connection 400V. 3ph.50HZ
l Electronically braked main spindle
Distance Between Centres 1,400 mm
l Electronic feed shut-off of Z axis
Height of Centres 220 mm
l External coolant tank with filling
level display & oil separator Swing Over Bed 440 mm
l Complete feed and lead spindle cover Swing Over Cross Slides 250 mm
l Electrical position shut-off with Width of Bed 300 mm
quadruple positioning stop Hole Through Spindle Ø52 mm
Spindle Nose Camlock DIN ISO 702 - 2 No 6
Included as Standard No of Spindle Speeds 12
l 200mm 3 Jaw Self centring chuck D1-6 Range of Spindle Speeds 40 - 2,200 rpm
l Quick change toolpost SWH 5-B Travel of Cross Slides 290 mm

l One Toolholder 25x120mm type D Travel of Compound Slide 153mm

Tailstock Quill Dia./Travel Ø58 mm / 180 mm
for 20mm square tools
Taper of Tailstock Quill 4MT
Optional Accessories: Range of Threads:
Metric (44 pitches) 0.5 - 7.5 mm
350mm Face Plate D1-6 0344-2980
Inch (44 pitches) 60 - 4 TPI
250mm 4 JaW Chuck D1-6 0344-2884
Module (44 pitches) 0.5 - 3.75 mm
Set of Soft Jaws for 200mm Chuck 4-241-200
DP (44 pitches) 8 - 120
Spare Toolholder 25x120 Type D 0338-4306
Range of Longitudinal Feeds 0.05 - 0.752 mm/rev(44)
Spare Toolholder 32x130 Type H 0338-4324 Range of Cross Feeds 0.05 - 0.376 mm/rev(44)
Travelling steady 10 - 165mm 0343-8015 Motor 5.5 kW
Fixed steady 15 - 170 mm 0343-8017 Coolant Pump Motor 100 W
Max Tool Shank 25 mm
Optional Tooling: Dims LxWxH(cm) 230 x 110 x 175

See pages 60 - 80 Weight Kg 1500

Page 48 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E.
Heavy Duty Precision Lathes
TZ 4 0343-2240 TZ 4V 0343-2245
Features:
l Hardened and ground z-axis guideway
l Partly clad with travelling, generously
dimensioned chip guard
l Travelling swarf guard with integrated
position display, coolant hose
and additional control panel
l Emergency stop push button and
lockable main switch
l LED machine light for complete
elimination of the workspace
l Control cabinet with 24-V DC adapter
l Optionally available interchangeable

Man. Lathes
gear set for imperial and modular thread ·
l Safety hand wheels with release
function in the X and Z axis
l Quick change tool holder SWH 5-B
l Tool holder 25 x 120 type D for square
chisels
l Digital position display NEWALL DP 700
TZ 4V:
l Motor circuit breaker
l Reduction of the main spindle
braking time thanks to energy
recuperation.

Included as Standard
l Fixed steady Ø10 - 130 mm Remember to order
l Travelling steady Ø10 - 100mm Lathe Chucks
l Reduction sleeve MT 3 and MT 6
Fixed centre MT 3
l
Specification TZ 4 TZ 4V
l Quick change tool holder SWH 5 - B Electrical Connection 400V. 3ph.50HZ
l Square Tool holder 25 x 120 type D Distance Between Centres 800 mm
l Interchangeable gear set for metric thread Height of Centres 200 mm
Swing Over Bed 400 mm
Optional Accessories: Swing Over Cross Slides 245 mm

Bison 200mm 3 Jaw Chuck A2 - 5 0345-0210 Width of Bed 260 mm

200mm Back Plate A2 - 5 0345-0212 Hole Through Spindle 52 mm

Bison 250mm 4 Jaw Chuck Spindle Nose DIN ISO 702-1 No 5

A2 - 5 centric 0345-0216 No of Spindle Speeds 16 speeds 2 step vario.

250mm Back Plate A2 - 5 0345-0218 Range of Spindle Speeds 45 - 1,800 rpm 50 - 3,000 rpm

320mm FacePlate A2 - 5 0344-2979 Travel of Cross Slides 212 mm

Spare Tool Holder 25 x 120 type D 0338-4306 Travel of Compound Slide 112 mm

Spare Tool Holder 32 x 130 type H 0338-4324 Tailstock Quill Dia./Travel Ø50 / 110 mm
Taper of Tailstock Quill 3MT

Interchangeable Gear Set for Imperial Range of Threads:

& Modular Thread Pitch Metric in range Metric (26 pitches) 0.2 - 14 mm
Range of Longitudinal Feeds 0.0263 - 1.8416 mm/rev(48)
80-1 turn/* (42 turns) Modular Thread
Range of Cross Feeds 0.0133 - 0.9321 mm/rev(48)
in range 0.1 - 7mm/rev (44 Threads) 0344-4160
Motor (2 Speed) 3 Kw / 3.5 Kw 5.5Kw
Coolant Pump Motor 0.125 kW
Optional Tooling:
Max Tool Shank 25 mm
Dims LxWxH(cm) 196 x 106 x 169
See pages 60 - 80
Weight Kg 1250

WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. Page 49
 Heavy Duty Precision Lathes
TH 4210D 0346-2055 TH 4215D 0346-2070

Features:
l Hardened & ground guideways l Spindle is supported by adjustable precision taper roller bearings
l Manufactured to DIN 8606 tool makers precision l Sealed Gearbox l Machine Light
l Guaranteed concentricity of spindle nose
better than 0.015 mm Specification TH 4210D TH 4215D
l DC 24 Volt electric panel. Electrical Connection 400V. 3ph.50HZ
l Removable gap bed l Coolant system Distance Between Centres 1,000 mm 1,500 mm
l Toolpost guard l Footbrake Height of Centres 210 mm
l Emergency foot Brake
Swing Over Bed 420 mm
l Chucks & Chuck Guards
Swing Over Cross Slides 250 mm
l Constant lubrication to headstock gears
l User friendly DR0 8 digits display, sealed Swing Over Gap 590 mm
& dazzle free Length of Gap 260 mm
Width of Bed 250 mm
Included as Standard
Hole Through Spindle 52 mm
l 250mm 3 Jaw Chuck D1 - 6 Spindle Nose Camlock DIN ISO 702-2 No 6
l 250mm 4 Jaw Chuck D1 - 6 No of Spindle Speeds 16
Range of Spindle Speeds 45 - 1,800 rpm
l 380mm Face Plate l Foot Brake
Travel of Cross Slides 230 mm
l Machine Lamp l Fixed Steady 15-130mm
Travel of Compound Slide 140 mm
l Travelling Steady 10 - 100mm Tailstock Quill Dia./Travel Ø50 mm / 120 mm
l Coolant System l Rear Splash Guard Taper of Tailstock Quill 4MT
l Toolpost Chip Guard l 2 Axis DRO Range of Threads:
Metric (39 pitches) 0.2 - 14 mm
Optional Accessories: Inch (45 pitches) 72- 2 TPI
Module (18 pitches) 0.3 - 3.5 mm/rev
Taper Turning Attachment 0344-0942 DP (21 pitches) 8 - 44
Soft Jaws for 250mm 3 Jaw Chuck 4-241-250
Range of Longitudinal Feeds 0.05 - 1.7 mm/rev(17)
XL 2 QCTP 1-190-400 Range of Cross Feeds 0.025 - 0.85 mm/rev(17)
5C Collet Chuck Key Operated D1 - 6 0344-1556 Motor 4.5 kW
Coolant Pump Motor 0.1 kW
Optional Tooling: Max Tool Shank 20 mm
Dims LxWxH(cm) 194 x 92 x 160 244 x 92 x 160
See pages 60 - 80 Weight Kg 1260 1540

Page 50 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E.
 Medium Duty Precision Lathe
TH 4010D 3ph 0340-2080

Man. Lathes
Features:
l Hardened & ground guideways l Spindle is supported by adjustable precision taper roller bearings
l Manufactured to DIN 8606 tool makers precision l Sealed Gearbox l Machine Light
l Guaranteed concentricity of spindle nose
better than 0.015 mm
l DC 24 Volt electric panel. Specification TH 4010D
l Removable gap bed l Coolant system Electrical Connection 400V. 3ph.50HZ
l Toolpost guard l Footbrake Distance Between Centres 1,000 mm
l Emergency foot Brake Height of Centres 205 mm
l Chucks & Chuck Guards
Swing Over Bed 410 mm
l Constant lubrication to headstock gears
Swing Over Cross Slides 240 mm
l User friendly DR0 8 digits display, sealed & dazzle free
Swing Over Gap 540 mm

Included as Standard Length of Gap 165 mm

Width of Bed 206 mm
l 200mm 3 Jaw Chuck l Rear Splash Guard Hole Through Spindle 52 mm
l 250mm 4 Jaw Chuck l 2 Step Drive Motor Spindle Nose Camlock DIN ISO 702-2 No 5

l 330mm Face Plate l Toolpost Chip Guard No of Spindle Speeds 16

Range of Spindle Speeds 45 - 1,800 rpm
l Fixed Steady 15 -100mm l Footbrake
Travel of Cross Slides 195 mm
l Travelling Steady 5-65mm l Machine Lamp
Travel of Compound Slide 100 mm
l Coolant System l 2 Axis DRO Tailstock Quill Dia./Travel Ø45 mm / 130 mm
Taper of Tailstock Quill 3MT
Optional Accessories: Range of Threads:
Metric (42 pitches) 0.4 - 7 mm
Taper Turning Attachment 0344-0934 Inch (42 pitches) 70 - 4 TPI
Soft Jaws for 200mm 3 Jaw Chuck 4-241-200 Range of Longitudinal Feeds 0.043 - 0.653 mm/rev(48)
XL 1X QCT 1-190-300 Range of Cross Feeds 0.015 - 0.206 mm/rev(48)
5C Collet Chuck Key opt D1 - 5 0344-1555 Motor 1.5 / 2.4 kW
Coolant Pump Motor 0.1 kW
Optional Tooling: Max Tool Shank 16 mm
Dims LxWxH(cm) 192 x 74 x 156
See pages 60 - 80 Weight Kg 775

WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. Page 51
Medium Duty Precision Lathe
TH 3610D 3ph 0340-2060

Features:
l Hardened & ground guideways l Spindle is supported by adjustable precision taper roller bearings
l Manufactured to DIN 8606 tool makers precision l Sealed Gearbox l Machine Light
l Guaranteed concentricity of spindle nose better than 0.015 mm
l DC 24 Volt electric panel.
l Removable gap bed l Coolant system Specification TH 3610D
l Toolpost guard l Footbrake Electrical Connection 400V. 3ph.50HZ
l Emergency foot Brake Distance Between Centres 980 mm
l Chucks & Chuck Guards Height of Centres 180 mm
l Constant lubrication to headstock gears
Swing Over Bed 356 mm
l User friendly DR0 8 digits display, sealed
Swing Over Cross Slides 196 mm
& dazzle free
Swing Over Gap 516 mm
Length of Gap 160 mm
Included as Standard
Width of Bed 187 mm
l 200mm 3 Jaw Chuck l 200mm 4 Jaw Chuck Hole Through Spindle 52 mm
l 300mm Face Plate l Footbrake Spindle Nose Camlock DIN ISO 702 - 2 No 5

l Machine Lamp l Fixed Steady 15-70mm No of Spindle Speeds 8

Range of Spindle Speeds 70 - 2,000 rpm
l Travelling Steady 15-60mm l Coolant System
Travel of Cross Slides 170 mm
l Rear Splash Guard l Toolpost Chip Guard
Travel of Compound Slide 100 mm
l 2 Axis DRO Tailstock Quill Dia./Travel Ø42 mm/120 mm
Taper of Tailstock Quill 3MT
Optional Accessories: Range of Threads:
Metric (26 pitches) 0.4 - 7 mm
Taper Turning Attachment 0344-0932 Inch (34 pitches) 56 - 4 TPI
Soft Jaws for 200mm 3 Jaw Chuck 4-241-200 Range of Longitudinal Feeds 0.052 - 1.392 mm/rev(32)
XL 1X QCTP 1-190-300 Range of Cross Feeds 0.014 - 0.38 mm/rev(32)
5C Collet Chuck Key Operated D1 - 5 0344-1555 Motor 1.5 kW
Coolant Pump Motor 0.1 kW
Optional Tooling: Max Tool Shank 16 mm
Dims LxWxH(cm) 193 x 73 x 162
See pages 60 - 80 Weight Kg 610

Page 52 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E.
Medium Duty Precision Lathes
TH 3309D 3ph 0340-2040

Man. Lathes
Features:
l Hardened & ground guideways l Spindle is supported by adjustable precision taper roller bearings
l Manufactured to DIN 8606 tool makers precision l Sealed Gearbox l Machine Light
l Guaranteed concentricity of spindle nose better than 0.015 mm
l DC 24 Volt electric panel.
l Removable gap bed l Coolant system Specification TH 3309D
l Toolpost guard l Footbrake Electrical Connection 400V. 3ph.50HZ
l Emergency foot Brake Distance Between Centres 830 mm
l Chucks & Chuck Guards Height of Centres 165mm
l Constant lubrication to headstock gears Swing Over Bed 330 mm
l User friendly DR0 8 digits display, sealed Swing Over Cross Slides 208 mm
& dazzle free
Swing Over Gap 448 mm
Length of Gap 196 mm
Included as Standard
Width of Bed 180 mm

l 160mm 3 Jaw Chuck l 200mm 4 Jaw Chuck Hole Through Spindle 38 mm

Spindle Nose Camlock DIN ISO 702-2 No 4
l 300mm Face Plate l Footbrake
No of Spindle Speeds 16
l Machine Lamp l Fixed Steady 10-50mm
Range of Spindle Speeds 70 - 2,000 rpm
l Travelling Steady 10-30mm l Coolant System Travel of Cross Slides 164 mm
l Rear Splash Guard Travel of Compound Slide 98 mm
l Toolpost Chip Guard l 2 Axis DRO Tailstock Quill Dia./Travel Ø32 mm / 110 mm
Taper of Tailstock Quill 3MT
Optional Accessories: Range of Threads:
Metric (26 pitches) 0.4 - 7 mm
Taper Turning Attachment 0344-0932 Inch (34 pitches) 56 - 4 TPI
Soft Jaws for 160mm 3 Jaw Chuck 4-241-160 Range of Longitudinal Feeds 0.052 - 1.392 mm/rev(32)
XL 1 QCT 1-190-200 Range of Cross Feeds 0.014 - 0.38 mm/rev(32)
5C Collet Chuck Key Operated D1 - 4 0344-1554 Motor 1.5 kW
Coolant Pump Motor 0.1 kW
Optional Tooling: Max Tool Shank 16 mm
Dims LxWxH(cm) 169 x 75 x 159
See pages 60 - 80 Weight Kg 430

WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. Page 53
 Medium Duty Precision Lathes
TU 3008G 3ph 0342-7210 TU 3008V 1ph 0342-7205 Vario Speed

Features:
l Hardened and ground guideways l Spindle is supported by adjustable precision taper roller bearings
l Manufactured to DIN 8606 tool makers precision l Guaranteed concentricity of spindle nose
better than 0.009 mm l DC 24 Volt electric panel. l Chuck Guard l Toolpost Guard

DRO 5

TU 3008V
Shown here
with optional
MST1 Stand

MST 1
Optional Machine Stand
For TU2304 -TU3008
0344-0409

Included as Standard Specification TU 3008G TU 3008V

l 160mm 3 Jaw Chuck Electrical Connection 400V. 3ph.50Hz 230V. 1phHz
Distance Between Centres 800 mm
l Fixed Centres MT3 & MT4
Height of Centres 158 mm
l Splash Guard l Chip Tray
Swing Over Bed 310 mm
l 4 Way Indexable Tool Post Swing Over Cross Slides 190 mm
l Set of Interchangeable Gears Width of Bed 180 mm
Hole Through Spindle 38 mm

Optional Accessories: Spindle Nose Camlock DIN ISO 702-2 No 4

No of Spindle Speeds 6 speeds 5 elec. vario
MST 1 Machine Stand 0344-0409 Range of Spindle Speeds 165 - 2,400 rpm 30 - 3,000 rpm
Travelling Steady 6 - 60mm 0344-1460 Travel of Cross Slides 150 mm
Fixed Steady 6 - 60mm 0344-1461 Travel of Compound Slide 65 mm
SWH 1-A QCTP 0338-4301
Tailstock Quill Dia./Travel Ø38 mm / 70 mm
20x90 mm Standard Tool Holder Type D 0338-4302
20x85 mm V Tool Holder Type H 0338-4321 Taper of Tailstock Quill 3MT
160mm 4 Jaw Self Centring Chuck D1 - 4 0344-2840 Range of Threads:
5C Collet Chuck Key opt. D1 - 4 0344-1554 Metric (18 pitches) 0.2 - 3.5 mm/rev
DRO 5 with 3 magnetic sensors 0338-3975
Inch (21 pitches) 56 - 8 TPI
MB2000 Magnetic tape 2000mm 0338-3979
Range of Longitudinal Feeds 0.085 - 0.832 mm/rev(9)
Assembly kit for X, Y & Z 0338-3985
Range of Cross Feeds 0.01 - 0.1 mm/rev(9)
Motor 1.5 kW 2.2 kW
Optional Tooling: Max Tool Shank 16 mm
Dims LxWxH(cm) 153 x 71 x 58
See pages 60 - 80 Weight Kg 260

Page 54 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E.
Medium Duty Precision Lathes
1ph 0342-7001
TU 2807 3ph 0342-7003
TU 2807V 1ph 0342-7006 Vario Speed

Features:
l Hardened and ground guideways l Spindle is supported by adjustable precision taper roller bearings
l Manufactured to DIN 8606 tool makers precision l Guaranteed concentricity of
spindle nose better than 0.009 mm l DC 24 Volt electric panel. l Chuck Guard l Toolpost Guard

DRO 5

Man. Lathes
TU 2807V
Shown here
with optional
MST1 Stand

MST 1
Optional Machine Stand
For TU2304 -TU3008
0344-0409

Included as Standard
Specification TU 2807 TU 2807V
l 125mm 3 Jaw Chuck
Electrical Connection 230V. 1ph.50Hz 230V. 1ph50Hz
l Fixed Centres MT2 & MT4 l Splash Guard 400V. 3Ph.50Hz
l Chip Tray l 4 Way Indexable Tool Post Distance Between Centres 700 mm
Height of Centres 140 mm
l Set of Interchangeable Gears
Swing Over Bed 266 mm
Optional Accessories: Swing Over Cross Slides 170 mm
Width of Bed 180mm
MST 1 Machine Stand 0344-0409 Hole Through Spindle 26 mm
125mm 4 Jaw Chuck Independent 0344-2874 Spindle Nose Short Taper
125mm Back Plate to suit 4 Jaw Chuck 0344-1312 No of Spindle Speeds 6 speeds 4 elec. vario
ER 32 Collet Chuck Ø 52mm Short Taper 0344-1306 Range of Spindle Speeds 150 - 2,000 rpm 30 - 4,000 rpm
ER 32 Collet Set 3 - 20mm 18Pcs 0344-1122
Travel of Cross Slides 160 mm
Travelling Steady 5 - 55mm 0344-1410
Travel of Compound Slide 60 mm
Fixed Steady 5 - 55mm 0344-1415
Tailstock Quill Travel 85 mm
SWH 1-A QCTP 0338-4301
Taper of Tailstock Quill 2MT
20x90 mm Standard Tool Holder Type D 0338-4302
Range of Threads:
20x85 mm V Tool Holder Type H 0338-4321
Metric (18 pitches) 0.2 - 3.5 mm/rev
DRO 5 with 3 magnetic sensors 0338-3975
Inch (21 pitches) 56 - 8 TPI
MB2000 Magnetic tape 2000mm 0338-3979
Range of Longitudinal Feeds 0.07 - 0.4 mm/rev(6)
Motor 0.85 kW 1.5 kW
Optional Tooling: Max Tool Shank 12 mm
Dims LxWxH(cm) 137 x 64 x 54 137 x 66 x 44
See pages 60- 80 Weight Kg 180

WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. Page 55
 Light Duty Small Precision Lathes
TU 2506 1ph 0342-5001
3ph 0342-5003
TU 2506 V 1ph Variable
0342-5006
Speed

Features:
l Hardened and ground guideways l Spindle is supported by adjustable precision taper roller bearings
l Manufactured to DIN 8606 tool makers precision l Guaranteed concentricity of spindle nose better than
0.009 mm l DC 24 Volt electric panel. l Chuck Guard l Toolpost Guard

DRO 5

TU 2506V
Shown here
with optional
MST1 Stand

MST 1
Optional Machine Stand
For TU2304 -TU3008
0344-0409

Included as Standard
l 125mm 3 Jaw Chuck
Specification TU 2506 TU 2506V
l Steady Centres MT2 & MT4 l Splash board
Electrical Connection 230V. 1ph.50Hz 230V. 1ph50Hz
l Chip Tray l Drill chuck protection 400V. 3Ph.50Hz
l Lathe tool made of high speed steel Distance Between Centres 550 mm

l Quadruple toolholder l Change gear kit Height of Centres 125 mm

Swing Over Bed 250 mm
Optional Accessories: Swing Over Cross Slides 150 mm
Width of Bed 135mm
MST 1 Machine Stand 0344-0409 Hole Through Spindle 26 mm
125mm 4 Jaw Chuck Independent 0344-2874 Spindle Nose Short Taper
125mm Back Plate to suit 4 Jaw Chuck 0344-1312
No of Spindle Speeds 6 speeds 4 elec. vario
240mm Face Plate 0344-1352
Range of Spindle Speeds 125 - 2,000 rpm 30 - 4,000 rpm
Fixed Steady 50mm 0344-1315
Travel of Cross Slides 110 mm
Travelling Steady 34mm 0344-1310
Travel of Compound Slide 70 mm
SWH 1-A QCTP 0338-4301
Tailstock Quill Dia./ Travel 30 mm / 65 mm
20x90 mm Standard Tool Holder Type D 0338-4302
Taper of Tailstock Quill 2MT
20x85 mm V Tool Holder Type H 0338-4321
Range of Threads:
ER 32 Collet Chuck Ø 52mm Short Taper 0344-1306
Metric (21 pitches) 0.2 - 4.0 mm/rev
ER 32 Collet Set 3 - 20mm 18Pcs 0344-1122
Inch (21 pitches) 56 - 8 TPI
DRO 5 with 3 magnetic sensors 0338-3975
Range of Longitudinal Feeds 0.07 - 0.4mm/rev(6)
MB2000 Magnetic tape 2000mm 0338-3979
Motor 0.75 kW 1.5 kW
Max Tool Shank 12 mm
Optional Tooling: Dims LxWxH(cm) 125 x 59 x 48
Weight Kg 125
See pages 60 - 80

Page 56 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E.
Light Duty Small Precision Lathes
TU 2406 1ph 0342-0350 TU 2406V 1ph Variable
0342-0355
Speed

Features:
l Hardened and
ground guideways
l Spindle is supported
by adjustable
precision taper
roller bearings
l Manufactured to
DIN 8606 tool
makers precision
l Guaranteed
concentricity of
spindle nose

Man. Lathes
better than 0.009 mm
l DC 24 Volt
electric panel.
l Chuck Guard
l Toolpost Guard

TU 2406V
Shown here
with optional
MST1 Stand

MST 1
Optional Machine Stand
For TU2304 -TU3008
0344-0409

Included as Standard
Specification TU 2406 TU 2406V
l 125mm 3 Jaw Chuck l Splash Guard
Electrical Connection 230V 1Ph 50Hz
l Fixed centres MT2 & MT3 l Chip Tray
Distance Between Centres 550 mm
l Four way Tool Post l Change gear kit Height of Centres 125 mm
Swing Over Bed 250 mm
Optional Accessories: Swing Over Cross Slides 140 mm
Width of Bed 135 mm
MST 1 Machine Stand 0344-0409
125mm 4Jaw Chuck Independent 0344-2874 Hole Through Spindle 21 mm
125mm Back Plate to suit 4 Jaw Chuck 0344-0511 Spindle Nose Cylindrical Ø52 mm
220mm Face Plate 0344-0552 No of Spindle Speeds 6 speeds 2 elec. vario
Fixed Steady 50mm 0344-1315 Range of Spindle Speeds 125 - 2,000 rpm 150 - 2,500 rpm
Travelling Steady 34mm 0344-1310 Travel of Cross Slides 120 mm
SWH 1-A QCTP 0338-4301 Travel of Compound Slide 75 mm
20x90 mm Standard Tool Holder Type D 0338-4302 Tailstock Quill Travel 70 mm
20x85 mm V Tool Holder Type H 0338-4321 Taper of Tailstock Quill 2MT
ER 25 Collet Chuck Ø52mm 0344-0505 Range of Threads:
ER 25 Collet Set 1 - 16mm 15PCs 0344-1109 Metric (14 pitches) 0.4 - 3.5 mm/rev
DRO 5 with 3 magnetic sensors 0338-3975 Inch (12 pitches) 44 - 10 TPI
MB2000 Magnetic tape 2000mm 0338-3979 Motor 0.75 kW 1.1 kW
Max Tool Shank 12 mm
Dims LxWxH(cm) 110 x 60 x 49
Optional Tooling: Weight Kg 125
See pages 60 - 80

WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. Page 57
 Light Duty Small Precision Lathes
TU 2304 1ph 0342-0320 TU 2304V 1ph Variable
0342-0325
Speed

Features:
l Hardened and ground
guideways
l Spindle is supported by
adjustable
precision taper roller bearings
l Manufactured to DIN 8606 tool
makers precision
l Guaranteed concentricity
of spindle nose better
than 0.009 mm
l Chuck Guard l Toolpost Guard

TU 2304V
Shown
here with
optional
MST1 Stand

MST 1
Optional Machine Stand
For TU2304 -TU3008
0344-0409
Included as Standard
l 100mm 3 Jaw Chuck l Splash Guard
Specification TU 2304 TU 2304V
l Steady centre MT2 & MT3 l Chip tray
Electrical Connection 230V 1Ph 50Hz
l Four way tool post l Change gear kit
Distance Between Centres 450 mm
Height of Centres 115 mm
Optional Accessories: Swing Over Bed 230 mm
MST 1 Machine Stand 0344-0409 Swing Over Cross Slides 120 mm
125mm 3 Jaw Chuck Self Centring 0344-2712 Width of Bed 135 mm
125mm 4 Jaw Chuck Self Centring 0344-2812 Hole Through Spindle 20 mm
125mm Back Plate for Chucks 0344-0313 Spindle Nose Cylindrical Ø72 mm
170mm Face Plate 0344-0295 No of Spindle Speeds 6 speeds 2 elec. vario
Fixed Steady 55mm 0344-0361 Range of Spindle Speeds 125 - 2,000 rpm 150 - 2,200 rpm
Travelling Steady 34mm 0344-0360
Travel of Cross Slides 120 mm
SWH 1-A QCTP 0338-4301
Travel of Compound Slide 75 mm
20x90mm Standard Tool Holder Type D 0338-4302
Tailstock Quill Travel 70 mm
20x85mm Vee Tool Holder Type H 0338-4321
Taper of Tailstock Quill 2MT
ER25 Collet Chuck Ø72mm 0344-0305
ER25 Collet Set 1 - 16mm 15PCs 0344-1109 Range of Threads:

DRO 5 with 3 magnetic sensors 0338-3975 Metric (14 pitches) 0.4 - 3.5 mm/rev
Inch (14 pitches) 44 - 8 TPI
MB2000 Magnetic tape 2000mm 0338-3979
Motor 0.75 kW
Max Tool Shank 12 mm
Optional Tooling: Dims LxWxH(cm) 97 x 59 x 51
See pages 60 - 80 Weight Kg 114

Page 58 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E.
Light Duty Small Precision Lathes
TU 1503V 1phVariable
0342-0260
Speed
TU 2004V 1ph Variable
0342-0310
Speed

Man. Lathes
Features:
l Hardened and ground guideways
l Spindle is supported by adjustable
precision taper roller bearings Specification TU 1503V TU 2004V
l Manufactured to DIN 8606 tool makers precision Electrical Connection 230V 1Ph 50Hz
l Guaranteed concentricity of spindle Distance Between Centres 265 mm 300mm
nose better than 0.009 mm Height of Centres 75mm 100mm
l DC 24 Volt electric panel. Swing Over Bed 150mm 200mm
l Chuck Guard
Swing Over Cross Slides 85mm 110mm
l Toolpost Guard
Width of Bed 70mm 100mm

Optional Accessories: Hole Through Spindle 11mm 21mm

Spindle Nose Cylindrical Ø22 mm Ø72 mm
TU 1503V
No of Spindle Speeds Elec Vario 2 elec. vario
Fixed Steady 40 mm 0344-0211
Range of Spindle Speeds 120 - 3,000 rpm 150 - 2,500 rpm
Travelling Steady 40mm 0344-0210 Travel of Cross Slides 55mm 75mm
ER 16 Collet Chuck Ø 22mm 0344-0281 Travel of Compound Slide 40mm 55mm
ER 16 Collet Set 1 - 10mm 12Pcs 0344-0282 Tailstock Quill Travel 30mm 65mm
Taper of Tailstock Quill 1MT Short 2MT
TU 2004V Range of Threads:
100 mm 4 Jaw Chuck Independent 0344-2872 Metric 0.5 - 1.5 (8) mm/rev 0.25 - 3 (14) mm/rev
100 mm Back Plate 0344-0312 Inch (12 pitches) - 44 - 8 TPI

170 mm Face Plate 0344-0295 Motor 450W 600W

Max Tool Shank 12 mm
Fixed Steady 50 mm 0344-0231
Dims LxWxH(cm) 57 x 34 x 30 83 x 43 x 36
Travelling Steady 40 mm 0344-0230
Weight Kg 23 61
SWH-AA QCTP 0338-4311
12x50 mm Standard Tool Holder Type D 0338-4312 Included as Standard
12x50 mm Vee Tool Holder Type H 0338-4320
l 80mm 3 Jaw Chuck for TU 1503V
ER 25 Collet Chuck Ø 72mm 0344-0305
l 100mm 3 Jaw Chuck for TU 2004V
ER 25 Collet Set 1 - 16mm 15Pcs 0344-1109
l MT1 Fixed Centre for TU 1503V
l MT2 & MT3 Steady Centre for TU 2004V
Optional Tooling:
l Splash Guard l Chip Tray l Tool Holder
See pages 60 - 80 l Change gear kit

WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT © E. & O.E. Page 59